Qualitative and quantitative assessment of microstructure in Al-B4C metal matrix composite processed by modified stir casting technique

Archives of Civil and Mechanical Engineering - 2016
Ritesh Raj1, Dineshsingh G. Thakur1
1Department of Mechanical Engineering, Defence Institute of Advanced Technology (DU), Pune, India

Tóm tắt

Recently, boron carbide reinforced aluminum matrix composites have witnessed an unprecedented technological significance as a structural neutron-shielding material for nuclear waste and nuclear submarines. The present study deals with processing of 6061Al-B4C composites containing different wt.% of B4C using modified stir casting method with bottom pouring arrangement. The dispersion of B4C particles in the aluminum matrix, interfacial characteristics and microstructural features were qualitatively characterized using field emission scanning electron microscope (FESEM) and optical microscope. Microstructural characterization revealed that the dispersion of B4C particles in the matrix was relatively uniform and at some locations small scale agglomeration and clustering of particles were observed. Particle size distribution has been studied for the quantitative description of agglomeration of B4C particles in the matrix which reveals the presence of small scale agglomeration of particles. Homogeneity and randomness of B4C particles in the matrix has been calculated by quadrat method. The results show a random spatial distribution of particles with small scale clustering. Microindentation test were performed on the fabricated composite and obtained results were statistically evaluated.

Từ khóa


Tài liệu tham khảo

N. Chawla, K.K. Chawla, Metal Matrix Composites, 2nd ed., Springer, New York, 2006.

S.C. Tjong, Z.Y. Ma, Microstructural and mechanical characteristics of in situ metal matrix composites, Materials Science and Engineering 29 (3–4) (2000) 49–113.

D.B. Miracle, Metal matrix composites–from science to technological significance, Composites Science and Technology 65 (15–16) (2005) 2526–2540.

A. Mazahery, M.O. Shabani, Mechanical properties of squeeze-cast A356 composites reinforced with B4C particulates, Journal of Materials Engineering and Performance 21 (2) (2012) 247–252.

T.P.D. Rajan, R.M. Pillai, B.C. Pai, Reinforcement coatings and interfaces in aluminium metal matrix composites, Journal of Materials Science 33 (14) (1998) 3491–3503.

F. Toptan, A. Kilicarslan, A. Karaaslan, M. Cigdem, I. Kerti, Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites, Materials and Design 31 (1) (2010) S87–S91.

Z. Zhang, X.-G. Chen, A. Charette, Fluidity and microstructure of an Al–10% B4C composite, Journal of Materials Science 44 (2) (2009) 492–501.

A. Baradeswaran, A.E. Perumal, Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites, Composites: Part B 54 (2013) 146–152.

I. Kerti, F. Toptan, Microstructural variations in cast B4C-reinforced aluminium matrix composites (AMCs), Materials Letters 62 (8–9) (2008) 1215–1218.

A. Canakci, F. Arslan, I. Yasar, Pre-treatment process of B4C particles to improve incorporation into molten AA2014 alloy, Journal of Materials Science 42 (23) (2007) 9536–9542.

J. Hashim, L. Looney, M.S.J. Hashmi, Metal matrix composites: production by the stir casting method, Journal of Materials Processing Technology 92–93 (1999) 1–7.

U.T.S. Pillai, B.C. Pai, K.G. Satyanarayana, A.D. Damodaran, Fracture behaviour of pressure die-cast aluminium-graphite composites, Journal of Materials Science 30 (6) (1995) 1455–1461.

X. Deng, N. Chawla, Modeling the effect of particle clustering on the mechanical behavior of SiC particle reinforced Al matrix composites, Journal of Materials Science 41 (17) (2006) 5731–5734.

S. Tzamtzis, N.S. Barekar, N.H. Babu, J. Patel, B.K. Dhindaw, Z. Fan, Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing–a novel Rheo-process, Composites: Part A 40 (2) (2009) 144–151.

A. Sakthivel, R. Palaninathan, R. Velmurugan, P.R. Rao, Production and mechanical properties of SiCp particle-reinforced 2618 aluminum alloy composites, Journal of Materials Science 43 (22) (2008) 7047–7056.

S. Naher, D. Brabazon, L. Looney, Development and assessment of a new quick quench stir caster design for the production of metal matrix composites, Journal of Materials Processing Technology 166 (3) (2004) 430–439.

V.P. Mahesh, P.S. Nair, T.P.D. Ranjan, B.C. Pai, R.C. Hubli, Processing of surface-treated boron carbide-reinforced aluminum matrix composites by liquid–metal stir-casting technique, Journal of Composite Materials 45 (23) (2011) 2371–2378.

A.K. Suri, C. Subramanian, J.K. Sonber, T.S.R. Ch. Murthy, Synthesis and consolidation of boron carbide: a review, International Materials Reviews 55 (1) (2010) 4–40.

J.C. Viala, J. Bouix, G. Gonzalez, C. Esnouf, Chemical reactivity of aluminium with boron carbide, Journal of Materials Science 32 (17) (1997) 4559–4573.

S.Y. OH, J.A. Cornie, K.C. Russell, Wetting of ceramic particulates with liquid aluminum alloys: Part II. Study of wettability, Metallurgical Transactions A 20 (3) (1989) 533–541.

N.S. Barekar, S. Tzamtzis, N. Hari Babu, Z. Fan, B.K. Dhindaw, Processing of ultrafine-size particulate metal matrix composites by advanced shear technology, Metallurgical and Materials Transactions A 40 (3) (2009) 691–701.

J. Hashim, L. Looney, M.S.J. Hashmi, Particle distribution in cast metal matrix composites–Part I, Journal of Materials Processing Technology 123 (2) (2002) 251–257.

P.A. Karnezis, G. Durrant, B. Cantor, Characterization of reinforcement distribution in cast Al-alloy/SiCp composites, Materials Characterization 40 (2) (1998) 97–109.

B. Dutta, M.K. Surappa, Directional dendritic solidification of a composite slurry: Part I. Dendrite morphology, Metallurgical and Materials Transactions A 29 (4) (1998) 1319–1327.

A.R. Kennedy, The microstructure and mechanical properties of Al-Si-B4C metal matrix composites, Journal of Materials Science 37 (2002) 317–323.

A. Canakci, F. Arslan, I. Yasar, Pre-treatment process of B4C particles to improve incorporation into molten AA2014 alloy, Journal of Materials Science 42 (2007) 9536–9542.

J. Scalon, N.R.J. Fieller, E.C. Stillman, H.V. Atkinson, A modelbased analysis of particle size distributions in composite materials, Acta Materialia 51 (4) (2003) 997–1006.

J. Schneider, M. Bigerelle, A. Iost, Statistical analysis of the Vickers hardness, Materials Science and Engineering A 262 (1–2) (1999) 256–263.

C. Lin, C. Berndt, Statistical analysis of microhardness variations in thermal spray coatings, Journal of Materials Science 30 (1995) 111–117.

M. Factor, I. Roman, Vickers microindentation of WC-12% Co thermal spray coating, Surface and Coatings Technology 132 (2000) 65–75.

J. Gong, W. Si, Z. Guan, Effect of load-dependence of hardness on indentation toughness determination for soda-lime glass, Journal of Non-Crystalline Solids 282 (2001) 325–328.

S. Jana, U. Ramamurty, K. Chattopadhyay, Y. Kawamura, Subsurface deformation during Vickers indentation of bulk metallic glasses, Materials Science and Engineering A 375–377 (2004) 1191–1195.

J. Gong, J. Wu, Z. Guan, Examination of the indentation size effect in low-load Vickers hardness testing of ceramics, Journal of the European Ceramic Society 19 (1999) 2625–2631.

Y. Shen, N. Chawla, On the correlation between hardness and tensile strength in particle reinforced metal matrix composites, Materials Science and Engineering A297 (2001) 44–47.

Thông tin
Thông tin xuất bản

Archives of Civil and Mechanical Engineering

Thông tin tác giả