Pyrolysis of organic ester cured alkaline phenolic resin: Identification of products

Pizzi, 2014, 13 Pilato, 2010, 41 Lee, 2007 Zhao, 2013, Thermal degradation characteristics of phenol–formaldehyde resins derived from beetle infested pine barks, Thermochim. Acta, 555, 46, 10.1016/j.tca.2012.12.002 Gardziella, 2000, 488 Wang, 2007, Characterization of hydrocarbon emissions from green sand foundry core binders by analytical pyrolysis, Environ. Sci. Technol., 41, 7922, 10.1021/es071657o Wang, 2011, Hazardous air pollutant formation from pyrolysis of typical Chinese casting materials, Environ. Sci. Technol., 45, 6539, 10.1021/es200310p Tiedje, 2010, Emission of organic compounds from mould and core binders used for casting iron, aluminium and bronze in sand moulds, J. Environ. Sci. Health A Tox. Hazard. Subst. Environ. Eng., 45, 1866, 10.1080/10934529.2010.520595 Holtzer, 2014, The influence of reclaim addition on the emission of PAHs and BTEX from moulding sands with furfuryl resin with the average amount of furfuryl alcohol, Arch. Foundry Eng., 14, 37, 10.2478/afe-2014-0009 Holtzer, 2017 Sheperd, 2017, Understanding emission characteristics of a foundry sand binder, 934 Strzemiecka, 2016, Examination of the chemical changes in cured phenol-formaldehyde resins during storage, J. Chromatogr. A, 1441, 106, 10.1016/j.chroma.2016.02.051 Dungan, 2005, 3rd, Pyrolysis of foundry sand resins: a determination of organic products by mass spectrometry, J. Environ. Sci. Health A Tox. Hazard. Subst. Environ. Eng., 40, 1557, 10.1081/ESE-200060630 Lytle, 1998, Determination of novolac resin thermal decomposition products by pyrolysis-gas chromatography-mass spectrometry, J. Anal. Appl. Pyrolysis, 45, 121, 10.1016/S0165-2370(98)00062-X Huang, 2016, Application conditions for ester cured alkaline phenolic resin sand, China Foundry, 13, 231, 10.1007/s41230-016-6022-x Campbell, 2011, Complete casting handbook Pizzi, 1993, On the chemistry, behavior, and cure acceleration of phenol–formaldehyde resins under very alkaline conditions, J. Anal. Appl. Pyrolysis, 49, 2157 Huang, 2014, Curing mechanism of alkaline phenolic resin with organic ester, China Foundry, 11, 447 Holtzer, 2013, Investigations of properties of moulding sands with resins applied in the ALPHASET technology, Arch. Foundry Eng., 13, 31 Kmita, 2016, Thermal decomposition of foundry resins: a determination of organic products by thermogravimetry–gas chromatography–mass spectrometry (TG–GC–MS), Arab. J. Chem. Li, 2003, Thermal decomposition characteristics of poly(propylene carbonate) using TG/IR and Py-GC/MS techniques, Polym. Degrad. Stab., 81, 157, 10.1016/S0141-3910(03)00085-5 Grenier-Loustalot, 2000, Phenolic resins Part 6. Identifications of volatile organic molecules during thermal treatment of neat resols and resol filled with glass fibers, Polymer, 41, 7123, 10.1016/S0032-3861(00)00045-8 Testoni, 1990, Qualitative analysis of a commercially available phenol—formaldehyde resin, by static and dynamic headspace analysis using a mass-selective detector, J. Chromatogr. A, 509, 101, 10.1016/S0021-9673(01)93242-X Holtzer, 2015, Influence of the reclaim addition to the moulding sand matrix obtained in the ALPHASET technology on the emission of gases – comparison with moulding sand with furfuryl resin, Arch. Foundry Eng., 15, 121 Lis, 2016, Wood-derived tar as a carbon binder precursor for carbon and graphite technology, J. Wood Chem. Technol., 36, 393, 10.1080/02773813.2016.1198380 Gubernat, 2017, Thermomechanical characterisation of coal tar pitch- based carbon containing SiC nanoparticles, Ceram. Int., 43, 8109, 10.1016/j.ceramint.2017.03.134 Musiol, 2016, Comparative study of the structure and microstructure of PAN-based nano- and micro-carbon fibers, Ceram. Int., 42, 11603, 10.1016/j.ceramint.2016.04.055 Johnston, 1988, Phenolics: a literature review of thermal decomposition products and toxicity, J. Am. Coll. Toxicol., 7, 201, 10.3109/10915818809014520 Phillips, 2016, Thermal decomposition of poly(propylene carbonate): End-capping, additives, and solvent effects, Polym. Degrad. Stab, 125, 129, 10.1016/j.polymdegradstab.2016.01.004 Lu, 2005, Kinetic analysis of thermal decomposition of poly(propylene carbonate), Polym. Degrad. Stab., 89, 282, 10.1016/j.polymdegradstab.2004.12.025 Sykes, 2017 Rota, 2002, Experimental and modeling analysis of the NOxOUT process, Chem. Eng. Sci., 57, 27, 10.1016/S0009-2509(01)00367-0 Lippits, 2008, A comparative study of the selective oxidation of NH3 to N2 over gold, silver and copper catalysts and the effect of addition of Li2O and CeOx, Catal. Today, 137, 446, 10.1016/j.cattod.2007.11.021 Gianella, 2010, Infrared spectroscopy on smoke produced by cauterization of animal tissue, Sensors (Basel), 10, 2694, 10.3390/s100402694 Chen, 2008, A novel thermal degradation mechanism of phenol–formaldehyde type resins, Thermochim. Acta, 476, 39, 10.1016/j.tca.2008.04.013 Jiang, 2012, The pyrolysis mechanism of phenol formaldehyde resin, Polym. Degrad. Stab., 97, 1527, 10.1016/j.polymdegradstab.2012.04.016 Roczniak, 2017, The use of Py-GC/MS (pyrolysis/gas chromatography/mass spectroscopy) in the analysis of foundry binders: alkaline phenolic resol resin, Trans. Foundry Res. Inst., 57, 19 Laino, 2012, Mechanisms of propylene glycol and triacetin pyrolysis, J. Phys. Chem. A, 116, 4602, 10.1021/jp300997d Wang, 2009, Study on the pyrolysis of phenol-formaldehyde (PF) resin and modified PF resin, Thermochim. Acta, 496, 136, 10.1016/j.tca.2009.07.012