Pyrolysis of chlorine contaminated municipal plastic waste: In-situ upgrading of pyrolysis oils by Ni/ZSM-5, Ni/SAPO-11, red mud and Ca(OH)2 containing catalysts

Home: PlasticsEurope, 2017 2017, 140 Wong, 2015, Current state and future prospects of plastic waste as source of fuel: a review, Renew. Sustain. Energy Rev., 50, 1167, 10.1016/j.rser.2015.04.063 López, 2011, Dechlorination of fuels in pyrolysis of PVC containing plastic wastes, Fuel Process. Technol., 92, 253, 10.1016/j.fuproc.2010.05.008 Gandidi, 2018, Thermal-catalytic cracking of real MSW into bio-crude oil, J. Energy Inst., 91, 304, 10.1016/j.joei.2016.11.005 López, 2010, Pyrolysis of municipal plastic wastes: influence of raw material composition, Waste Manag., 30, 620, 10.1016/j.wasman.2009.10.014 Owen, 1984, 197 Leadbitter, 2002, PVC and sustainability, Prog. Polym. Sci., 27, 2197, 10.1016/S0079-6700(02)00038-2 Starnes, 2002, Structural and mechanistic aspects of the thermal degradation of poly(vinyl chloride), Prog. Polym. Sci., 27, 2133, 10.1016/S0079-6700(02)00063-1 Çepelioğullar, 2014, Products characterization study of a slow pyrolysis of biomass-plastic mixtures in a fixed-bed reactor, J. Anal. Appl. Pyrol., 110, 363, 10.1016/j.jaap.2014.10.002 Bockhorn, 1999, Dehydrochlorination of plastic mixtures, J. Anal. Appl. Pyrol., 49, 97, 10.1016/S0165-2370(98)00124-7 Grabda, 2014, Study on simultaneous recycling of EAF dust and plastic waste containing TBBPA, J. Hazard Mater., 278, 97, 10.1016/j.jhazmat.2014.05.084 Yuan, 2014, High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor, Waste Manag., 34, 1045, 10.1016/j.wasman.2013.08.021 Cao, 2016, Morphological characteristics of polyvinyl chloride (PVC) dechlorination during pyrolysis process: influence of PVC content and heating rate, Waste Manag., 58, 241, 10.1016/j.wasman.2016.08.031 Czajczyńska, 2017, Potentials of pyrolysis processes in the waste management sector, Energy Procedia, 123, 387, 10.1016/j.egypro.2017.07.275 Ali, 2005, Thermal and catalytic decomposition behavior of PVC mixed plastic waste with petroleum residue, J. Anal. Appl. Pyrol., 74, 282, 10.1016/j.jaap.2004.12.010 Blazsó, 1999, Effect of metals, metal oxides, and carboxylates on the thermal decomposition processes of poly(vinyl chloride), J. Anal. Appl. Pyrol., 49, 125, 10.1016/S0165-2370(98)00123-5 Kuramochi, 2008, HCl emission during co-pyrolysis of demolition wood with a small amount of PVC film and the effect of wood constituents on HCl emission reduction, Fuel, 87, 3155, 10.1016/j.fuel.2008.03.021 Bockhorn, 1999, Environmental engineering: stepwise pyrolysis of plastic waste, Chem. Eng. Sci., 54, 3043, 10.1016/S0009-2509(98)00385-6 Uçar, 2016, Co-pyrolysis of waste polyolefins with waste motor oil, J. Anal. Appl. Pyrol., 119, 233, 10.1016/j.jaap.2016.01.013 Santella, 2016, Thermal and catalytic pyrolysis of a mixture of plastics from small waste electrical and electronic equipment (WEEE), Waste Manag., 54, 143, 10.1016/j.wasman.2016.05.005 Uzun, 2017, Pyrolysis kinetics of walnut shell and waste polyolefins using thermogravimetric analysis, J. Energy Inst., 90, 825, 10.1016/j.joei.2016.09.001 Akancha, 2019, Co-pyrolysis of waste polypropylene and rice bran wax – production of biofuel and its characterization, J. Energy Inst., 92, 933, 10.1016/j.joei.2018.07.011 Al-Salem, 2017, A review on thermal and catalytic pyrolysis of plastic solid waste (PSW), J. Environ. Manag., 197, 177, 10.1016/j.jenvman.2017.03.084 Laurent, 2000, Municipal waste pyrolysis (1). The behaviour of chlorine with cellulose and lignin, Erdol ErdGas Kohle, 116, 89 Yao, 2017, A new approach to transforming PVC waste into energy via combined hydrothermal carbonization and fast pyrolysis, Energy, 141, 1156, 10.1016/j.energy.2017.10.008 Lopez-Urionabarrenechea, 2015, Upgrading of chlorinated oils coming from pyrolysis of plastic waste, Fuel Process. Technol., 137, 229, 10.1016/j.fuproc.2015.04.015 Veksha, 2018, Upgrading of non-condensable pyrolysis gas from mixed plastics through catalytic decomposition and dechlorination, Fuel Process. Technol., 170, 13, 10.1016/j.fuproc.2017.10.019 Kumagai, 2015, Thermal decomposition of individual and mixed plastics in the presence of CaO and Ca(OH)2, J. Anal. Appl. Pyrol., 113, 584, 10.1016/j.jaap.2015.04.004 Fontana, 2001, Municipal waste pyrolysis (2): chlorine capture by addition of calcium and sodium-based sorbents, Erdol ErdGas Kohle, 117, 362 Sharuddin, 2016, A review on pyrolysis of plastic wastes, Energy Convers. Manag., 115, 308, 10.1016/j.enconman.2016.02.037 Miandad, 2016, Catalytic pyrolysis of plastic waste: a review, Process Saf. Environ. Protect., 102, 822, 10.1016/j.psep.2016.06.022 Kunwar, 2016, Plastics to fuel: a review, Renew. Sustain. Energy Rev., 54, 421, 10.1016/j.rser.2015.10.015 Ragaert, 2017, Mechanical and chemical recycling of solid plastic waste, Waste Manag., 69, 24, 10.1016/j.wasman.2017.07.044 Ates, 2013, Production of char from hornbeam sawdust and its performance evaluation in the dye removal, J. Anal. Appl. Pyrol., 103, 159, 10.1016/j.jaap.2013.01.021 Ratnasari, 2017, Catalytic pyrolysis of waste plastics using staged catalysis for production of gasoline range hydrocarbon oils, J. Anal. Appl. Pyrol., 124, 631, 10.1016/j.jaap.2016.12.027 Jitkarnka, 2007, Influences of thermal aging on properties and pyrolysis products of tire tread compound, J. Anal. Appl. Pyrol., 80, 269, 10.1016/j.jaap.2006.07.008 Ortega, 2011, Physical and chemical characteristics of aging pyrolysis oils produced from hardwood and softwood feedstocks, J. Anal. Appl. Pyrol., 91, 190, 10.1016/j.jaap.2011.02.007 Jampolski, 2017, Flow behavior and aging of pyrolysis oils from different feedstocks, Energy Fuel., 31, 5165, 10.1021/acs.energyfuels.7b00196 Wu, 2009, Ni/CeO2/ZSM-5 catalysts for the production of hydrogen from the pyrolysis-gasification of polypropylene, Int. J. Hydrogen Energy, 34, 6242, 10.1016/j.ijhydene.2009.05.121 Blanco, 2013, Characterization and evaluation of Ni/SiO2 catalysts for hydrogen production and tar reduction from catalytic steam pyrolysis-reforming of refuse derived fuel, Appl. Catal. B Environ., 134–135, 238, 10.1016/j.apcatb.2013.01.016 Elbaba, 2011, Hydrogen production from the pyrolysis-gasification of waste tyres with a nickel/cerium catalyst, Int. J. Hydrogen Energy, 36, 6628, 10.1016/j.ijhydene.2011.02.135 Miskolczi, 2017, Thermo-catalytic two-step pyrolysis of real waste plastics from end of life vehicle, J. Anal. Appl. Pyrol., 128, 1, 10.1016/j.jaap.2017.11.008 Jae, 2011, Investigation into the shape selectivity of zeolite catalysts for biomass conversion, J. Catal., 279, 257, 10.1016/j.jcat.2011.01.019 Li, 2016, Derived oil production by catalytic pyrolysis of scrap tires, Chin. J. Catal., 37, 526, 10.1016/S1872-2067(15)60998-6 Shahinuzzaman, 2017, Non-sulphide zeolite catalyst for bio-jet-fuel conversion, Renew. Sustain. Energy Rev., 77, 1375, 10.1016/j.rser.2017.01.162 Saad, 2015, Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene, J. Anal. Appl. Pyrol., 113, 35, 10.1016/j.jaap.2014.09.027