Pulverisation of dried and screened Norway spruce (Picea abies) sawdust in an air classifier mill

Mori, 2009, Development of utilization technologies of biomass energy, J Environ Eng Manag, 19, 67 Kobayashi, 2007, Evaluation of wood powder property pulverized by a vibration mill, J Jpn Inst Energ, 86, 730, 10.3775/jie.86.730 Salemane, 2006, Thermal and mechanical properties of polypropylene-wood powder composites, J Appl Polym Sci, 100, 4173, 10.1002/app.23521 Stark, 2003, Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites, Wood Fiber Sci, 35, 167 Stark, 1997, Effect of particle size on properties of wood-flour reinforced polypropylene composites, 134 Bledzki, 2003, Wood fibre reinforced polypropylene composites: effect of fibre geometry and coupling agent on physico-mechanical properties, Appl Compos Mater, 10, 365, 10.1023/A:1025741100628 Bledzki, 2005, A comparison of compounding processes and wood type for wood fibre-PP composites, Composites Part A: Appl Sci Manufacturing, 36, 789, 10.1016/j.compositesa.2004.10.029 Renner, 2010, Micromechanical deformation processes in PP/wood composites: particle characteristics, adhesion, mechanisms, Composites Part A: Appl Sci Manufacturing, 41, 1653, 10.1016/j.compositesa.2010.08.001 Park, 1997, A comparison of compounding processes for wood-fiber/thermoplastic composites, Polym Composite, 18, 425, 10.1002/pc.10294 Paulrud, 2004, The effects of particle characteristics on emissions from burning wood fuel powder, Fuel, 83, 813, 10.1016/j.fuel.2003.10.010 Datta R. Energy requirements for lignocellulose pretreatment processes. Proc Biochem 16; Jun-Jly; 16–19, 42. Hendricks, 2009, Pretreatments to enhance the digestibility of lignocellulosic biomass, Bioresour Technol, 100, 10, 10.1016/j.biortech.2008.05.027 Chandra, 2007, Substrate pretreatment: the key to effective enzymatic hydrolysis of lignocellulosics?, Adv Biochem Eng Biotechnol, 108, 67 Paulrud, 2002, Particle and handling characteristics of wood fuel powder: effect of different mills, Fuel Process Tech, 76, 23, 10.1016/S0378-3820(02)00008-5 Fukazawa, 1982, Relationship between ball milling and the susceptibility of wood to digestion by cellulose, Wood Sci Tech, 16, 279, 10.1007/BF00353153 Gravelsins RJ. Studies of grinding of wood and bark-wood mixtures with the Szego mill [PhD thesis]. Toronto, University of Toronto; 1998. Dooley, 2007, Ball milling for fines generation, 41 Trass, 1987, Fine grinding of wood chips and wood wastes with the szego mill, 198 Kobayashi, 2008, A new pulverized biomass utilization technology, Powder Tech, 180, 272, 10.1016/j.powtec.2007.02.041 Repellin, 2010, Energy requirement for fine grinding of torrefied wood, Biomass Bioenerg, 34, 923, 10.1016/j.biombioe.2010.01.039 Esteban, 2006, Evaluation of different strategies for pulverization of forest biomasses, Powder Tech, 166, 139, 10.1016/j.powtec.2006.05.018 Barton, 1984, Definition of biomass samples involving wood, bark and foliage, Biomass, 4, 311, 10.1016/0144-4565(84)90044-1 Umetrics, 2003 Luukko K. Characterization and properties of mechanical pulp fines [PhD thesis]. Espoo: Finnish Acad Technol; 1999. Segal, 1959, An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer, Text Res J, 29, 786, 10.1177/004051755902901003 Bagherifam, 2010, Uranium removal from aqueous solutions by wood powder and wheat straw, J Radioanal Nucl Chem, 283, 289, 10.1007/s10967-009-0348-4 Bouafif, 2009, Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites, Composites Part A: Appl Sci Manufacturing, 40, 1975, 10.1016/j.compositesa.2009.06.003