Pulsed laser melting in liquid for crystalline spherical submicrometer particle fabrication– Mechanism, process control, and applications

Progress in Materials Science - Tập 131 - Trang 101004 - 2023
Yoshie Ishikawa1, Takeshi Tsuji2, Shota Sakaki3, Naoto Koshizaki4
1Research Institute for Advanced Electronics and Photonics, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
2Interdisciplinary Graduate School of Science and Engineering, Shimane University, 1060 Nishikawatsu-cho, Matsue 690-8504, Japan
3Graduate School of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628, Japan
4Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-Ku, Sapporo 060–8628, Japan

Tài liệu tham khảo

Zhang, 2017, Laser Synthesis and Processing of Colloids: Fundamentals and Applications, Chem Rev, 117, 3990, 10.1021/acs.chemrev.6b00468 Xiao, 2017, External field-assisted laser ablation in liquid: An efficient strategy for nanocrystal synthesis and nanostructure assembly, Prog Mater Sci, 87, 140, 10.1016/j.pmatsci.2017.02.004 Amendola, 2020, Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles, Chem Eur J, 26, 9206, 10.1002/chem.202000686 Zhang, 2017, Recent Advances in Surfactant-Free, Surface-Charged, and Defect-Rich Catalysts Developed by Laser Ablation and Processing in Liquids, ChemNanoMat, 3, 512, 10.1002/cnma.201700079 Kanitz, 2019, Review on experimental and theoretical investigations of the early stage, femtoseconds to microseconds processes during laser ablation in liquid-phase for the synthesis of colloidal nanoparticles, Plasma Sources Sci Technol, 28, 10.1088/1361-6595/ab3dbe Fazio, 2020, Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications, Nanomaterials, 10, 2317, 10.3390/nano10112317 Zhang, 2021, Laser ablation in liquids for nanomaterial synthesis: Diversities of targets and liquids, J Phys Photonics, 3, 10.1088/2515-7647/ac0bfd Liang, 2021, Design and perspective of amorphous metal nanoparticles from laser synthesis and processing, Phys Chem Chem Phys, 23, 11121, 10.1039/D1CP00701G Bag, 2019, Combination of pulsed laser ablation and inert gas condensation for the synthesis of nanostructured nanocrystalline, amorphous and composite materials, Nanoscale Adv, 1, 4513, 10.1039/C9NA00533A Kim, 2017, Synthesis of Nanoparticles by Laser Ablation: A Review, Kona, 34, 80, 10.14356/kona.2017009 Henglein, 1993, Physicochemical Properties of Small Metal Particles In Solution - Microelectrode Reactions, Chemisorption, Composite Metal Particles, and the Atom-To-Metal Transition, J Phys Chem, 97, 5457, 10.1021/j100123a004 Fojtik, 1993, Laser Ablation of Films and Suspended Particles in a Solvent - Formation of Cluster and Colloid Solutions., Ber Bunsenges Phys Chem Chem Phys, 97, 252 Mafuné, 2000, Formation and size control of silver nanoparticles by laser ablation in aqueous solution, J Phys Chem B, 104, 9111, 10.1021/jp001336y Mafuné, 2000, Structure and stability of silver nanoparticles in aqueous solution produced by laser ablation, J Phys Chem B, 104, 8333, 10.1021/jp001803b Mafuné, 2001, Dissociation and aggregation of gold nanoparticles under laser irradiation, J Phys Chem B, 105, 9050, 10.1021/jp0111620 Mafuné, 2001, Formation of gold nanoparticles by laser ablation in aqueous solution of surfactant, J Phys Chem B, 105, 5114, 10.1021/jp0037091 Mafuné, 2002, Full physical preparation of size-selected gold nanoparticles in solution: Laser ablation and laser-induced size control, J Phys Chem B, 106, 7575, 10.1021/jp020577y Mafuné, 2003, Formation of stable platinum nanoparticles by laser ablation in water, J Phys Chem B, 107, 4218, 10.1021/jp021580k Simakin, 2001, Nanodisks of Au and Ag produced by laser ablation in liquid environment, Chem Phys Lett, 348, 182, 10.1016/S0009-2614(01)01136-8 Tsuji, 2002, Preparation of silver nanoparticles by laser ablation in solution: influence of laser wavelength on particle size, Appl Surf Sci, 202, 80, 10.1016/S0169-4332(02)00936-4 Kabashin, 2003, Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water, J Appl Phys, 94, 7941, 10.1063/1.1626793 Dolgaev, 2002, Nanoparticles produced by laser ablation of solids in liquid environment, Appl Surf Sci, 186, 546, 10.1016/S0169-4332(01)00634-1 Compagnini, 2002, Ablation of noble metals in liquids: a method to obtain nanoparticles in a thin polymeric film, Phys Chem Chem Phys, 4, 2787, 10.1039/b109490d Usui, 2005, Photoluminescence of ZnO nanoparticles prepared by laser ablation in different surfactant solutions, J Phys Chem B, 109, 120, 10.1021/jp046747j Izgaliev, 2004, Intermediate phase upon alloying Au-Ag nanoparticles under laser exposure of the mixture of individual colloids, Chem Phys Lett, 390, 467, 10.1016/j.cplett.2004.04.053 Ishikawa, 2006, Preparation of Fe–Pt alloy particles by pulsed laser ablation in liquid medium, Chem Phys Lett, 428, 426, 10.1016/j.cplett.2006.07.076 Barcikowski, 2007, Generation of nanoparticle colloids by picosecond and femtosecond laser ablations in liquid flow, Appl Phys Lett, 91, 10.1063/1.2773937 Amans, 2019, Status and demand of research to bring laser generation of nanoparticles in liquids to maturity, Appl Surf Sci, 488, 445, 10.1016/j.apsusc.2019.05.117 Takami, 1999, Laser-induced size reduction of noble metal particles, J Phys Chem B, 103, 1226, 10.1021/jp983503o Singh, 2010, Optical Properties of Selenium Quantum Dots Produced with Laser Irradiation of Water Suspended Sc Nanoparticles, J Phys Chem C, 114, 17374, 10.1021/jp105037w Inasawa, 2005, Bimodal size distribution of gold nanoparticles under picosecond laser pulses, J Phys Chem B, 109, 9404, 10.1021/jp0441240 Wagener, 2010, Laser fragmentation of organic microparticles into colloidal nanoparticles in a free liquid jet, Appl Phys A, 101, 435, 10.1007/s00339-010-5814-x Kawasaki, 2006, 1064-nm laser fragmentation of thin Au and Ag flakes in acetone for highly productive pathway to stable metal nanoparticles, Appl Surf Sci, 253, 2208, 10.1016/j.apsusc.2006.04.024 Kawasaki, 2008, Laser-induced fragmentative decomposition of ketone-suspended Ag2O micropowders to novel self-stabilized Ag nanoparticles, J Phys Chem C, 112, 15647, 10.1021/jp8056916 Kawasaki, 2011, Laser-Induced Fragmentative Decomposition of Fine CuO Powder in Acetone as Highly Productive Pathway to Cu and Cu2O Nanoparticles, J Phys Chem C, 115, 5165, 10.1021/jp1095147 Nichols, 2006, Zeolite LTA Nanoparticles Prepared by Laser-Induced Fracture of Zeolite Microcrystals, J Phys Chem B, 110, 83, 10.1021/jp0549733 Usui, 2006, Optical Transmittance of Indium Tin Oxide Nanoparticles Prepared by Laser-Induced Fragmentation in Water, J Phys Chem B, 110, 12890, 10.1021/jp061866f Yu, 2020, Laser Fragmentation-Induced Defect-Rich Cobalt Oxide Nanoparticles for Electrochemical Oxygen Evolution Reaction, ChemSusChem, 13, 520, 10.1002/cssc.201903186 Ziefuss, 2019, Synergism between Specific Halide Anions and pH Effects during Nanosecond Laser Fragmentation of Ligand-Free Gold Nanoparticles, Langmuir, 35, 6630, 10.1021/acs.langmuir.9b00418 Reichenberger, 2022, Freezing crystallographic defects into nanoparticles: The development of pulsed laser defect engineering in liquid (PUDEL), Sci China Phys Mech, 65, 10.1007/s11433-021-1864-0 Link, 2000, How Does a Gold Nanorod Melt?, J Phys Chem B, 104, 7867, 10.1021/jp0011701 Link, 1999, Simulation of the Optical Absorption Spectra of Gold Nanorods as a Function of Their Aspect Ratio and the Effect of the Medium Dielectric Constant, J Phys Chem B, 103, 3073, 10.1021/jp990183f Link, 2005, Simulation of the Optical Absorption Spectra of Gold Nanorods as a Function of Their Aspect Ratio and the Effect of the Medium Dielectric Constant, J Phys Chem B, 109, 10531, 10.1021/jp058091f Link, 1999, Laser Photothermal Melting and Fragmentation of Gold Nanorods: Energy and Laser Pulse-Width Dependence, J Phys Chem A, 103, 1165, 10.1021/jp983141k Koshizaki N, Pyatenko A, Wang H, Ishikawa Y. Submicrometer Spherical Particle Fabrication by Pulsed Laser Melting in Liquid. Rev Laser Eng (Re-za- Kenkyu) (in Japanese). 2012;40:83-7. Ishikawa, 2012, Submicrometer Spherical Particle Fabrication by Pulsed Laser Melting in Liquid - Boron Carbide Submicrometer Spherical Particle Case -, J Soc Powder Technol Japan (Funtai Kogaku Kaishi) (in Japanese), 49, 614 Koshizaki, 2015, Crystalline Submicrometer Spherical Particle Synthesis by Laser Melting, Chem Chem Ind (Kagaku to Kogyo) (in Japanese), 68, 134 Koshizaki, 2014, Fabrication of Submicron Spherical Metal Particles by Laser Melting in Liquid, Materia Jpn (Materia) (in Japanese), 53, 87, 10.2320/materia.53.87 Koshizaki, 2014, Fabrication and Application of Submicron Spherical Particles for Scattering Control, Jpn J Optics (Kogaku) (in Japanese), 43, 510 Ishikawa, 2017, Application Direction of Submicrometer Spherical Particles Fabricated by Pulsed Laser Melting in Liquid, Rev Laser Eng (Re-za- Kenkyu) (in Japanese), 45, 262 Koshizaki, 2018, Synthesis of Crystalline Ceramic Spherical Particles by Laser Melting in Liquid, Ceramics Japan (Seramikkusu) (in Japanese), 53, 778 Ishikawa, 2020, Successive Production of Submicrometer-Sized Spherical Particles by Pulsed Laser Melting in Liquid, J Soc Powder Technol Japan (Funtai Kogaku Kaishi) (in Japanese), 57, 428 Ishikawa, 2022, Approaches to Fine Particle Mass Production with Laser Processes in Liquids, Jpn J Optics (Kogaku) (in Japanese), 51, 48 Pyatenko, 2013, Mechanism of pulse laser interaction with colloidal nanoparticles, Laser Photonics Rev, 7, 596, 10.1002/lpor.201300013 Pyatenko, 2014, Growth Mechanism of Monodisperse Spherical Particles under Nanosecond Pulsed Laser Irradiation, J Phys Chem C, 118, 4495, 10.1021/jp411958v Koshizaki, 2022, Formation Mechanism of Spherical Submicrometer Particles by Pulsed Laser Melting in Liquid, 115 Ishikawa, 2022, Mass Production of Spherical Submicrometer Particles by Pulsed Laser Melting in Liquid, 137 Hodak, 2000, Laser-Induced Inter-Diffusion in AuAg Core−Shell Nanoparticles, J Phys Chem B, 104, 11708, 10.1021/jp002438r Pyatenko, 2007, Synthesis of Spherical Silver Nanoparticles with Controllable Sizes in Aqueous Solutions, J Phys Chem C, 111, 7910, 10.1021/jp071080x Mafuné, 2003, Nanoscale soldering of metal nanoparticles for construction of higher-order structures, J Am Chem Soc, 125, 1686, 10.1021/ja021250d Kim, 2005, Laser-induced nanowelding of gold nanoparticles, Appl Phys Lett, 86 Amendola, 2007, Controlled size manipulation of free gold nanoparticles by laser irradiation and their facile bioconjugation, J Mater Chem, 17, 4705, 10.1039/b709621f González-Rubio, 2016, Reshaping, Fragmentation, and Assembly of Gold Nanoparticles Assisted by Pulse Lasers, Acc Chem Res, 49, 678, 10.1021/acs.accounts.6b00041 Werner, 2011, Femtosecond Laser-Induced Size Reduction of Aqueous Gold Nanoparticles, In Situ and Pump-Probe Spectroscopy Investigations Revealing Coulomb Explosion J Phys Chem C, 115, 8503 Hashimoto, 2012, Studies on the interaction of pulsed lasers with plasmonic gold nanoparticles toward light manipulation, heat management, and nanofabrication, J Photochem Photobiol C, 13, 28, 10.1016/j.jphotochemrev.2012.01.001 Setoura, 2012, Optical Scattering Spectral Thermometry and Refractometry of a Single Gold Nanoparticle under CW Laser Excitation, J Phys Chem C, 116, 15458, 10.1021/jp304271d Setoura, 2013, Observation of Nanoscale Cooling Effects by Substrates and the Surrounding Media for Single Gold Nanoparticles under CW-Laser Illumination, ACS Nano, 7, 7874, 10.1021/nn402863s Strasser, 2014, Computational Modeling of Pulsed Laser-Induced Heating and Evaporation of Gold Nanoparticles, J Phys Chem C, 118, 25748, 10.1021/jp508316v Hashimoto, 2016, Laser-driven phase transitions in aqueous colloidal gold nanoparticles under high pressure: picosecond pump-probe study, Phys Chem Chem Phys, 18, 4994, 10.1039/C5CP07395B Sugiyama, 2002, Size and Shape Transformation of TiO2 Nanoparticles by Irradiation of 308-nm Laser Beam, Jpn J Appl Phys, 41, 4666, 10.1143/JJAP.41.4666 Lima, 2006, Microstructural analyses of the nanoparticles obtained after laser irradiation of Ti and W in ethanol, Appl Surf Sci, 252, 4420, 10.1016/j.apsusc.2005.07.101 Yu, 2007, Laser Ablated Preparation of Noble Metal Nanoparticles in Liquid, Acta Phys Chim Sin, 23, 945, 10.3866/PKU.WHXB20070630 Zeng, 2007, Microstructure Control of Zn/ZnO Core/Shell Nanoparticles and Their Temperature-Dependent Blue Emissions, J Phys Chem B, 111, 14311, 10.1021/jp0770413 Liu, 2008, Fabrication and Size-Dependent Optical Properties of FeO Nanoparticles Induced by Laser Ablation in a Liquid Medium, J Phys Chem C, 112, 3261, 10.1021/jp709714a Phuoc, 2008, Synthesis of Mg(OH)2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents, Opt Lasers Eng, 46, 829, 10.1016/j.optlaseng.2008.05.018 Nikolov, 2009, Synthesis and characterization of TiOx nanoparticles prepared by pulsed-laser ablation of Ti target in water, Appl Surf Sci, 255, 5351, 10.1016/j.apsusc.2008.09.007 Liu, 2009, Room temperature synthesized rutile TiO2 nanoparticles induced by laser ablation in liquid and their photocatalytic activity, Nanotechnology, 20, 10.1088/0957-4484/20/28/285707 Khan, 2009, Generation and characterization of NiO nanoparticles by continuous wave fiber laser ablation in liquid, J Nanopart Res, 11, 1421, 10.1007/s11051-008-9530-9 Tan, 2009, Preparation of Zirconia Nanoparticles by Pulsed Laser Ablation in Liquid, Chem Lett, 38, 1102, 10.1246/cl.2009.1102 Liu, 2010, From nanocrystal synthesis to functional nanostructure fabrication: laser ablation in liquid, Phys Chem Chem Phys, 12, 3942, 10.1039/b918759f Barreca, 2010, Small size TiO2 nanoparticles prepared by laser ablation in water, Appl Surf Sci, 256, 6408, 10.1016/j.apsusc.2010.04.026 Nishi, 2010, Fabrication of Palladium Nanoparticles by Laser Ablation in Liquid, J Laser Micro Nanoeng, 5, 192, 10.2961/jlmn.2010.03.0002 Nichols, 2006, Laser ablation of a platinum target in water, III Laser-induced reactions J Appl Phys, 100 Ishikawa, 2007, Boron carbide spherical particles encapsulated in graphite prepared by pulsed laser irradiation of boron in liquid medium, Appl Phys Lett, 91, 10.1063/1.2799786 Ishikawa, 2010, Growth fusion of submicron spherical boron carbide particles by repetitive pulsed laser irradiation in liquid media, Appl Phys A, 99, 797, 10.1007/s00339-010-5745-6 Waag, 2019, Ablation target cooling by maximizing the nanoparticle productivity in laser synthesis of colloids, Appl Surf Sci, 466, 647, 10.1016/j.apsusc.2018.10.030 Wang, 2010, Selective pulsed heating for the synthesis of semiconductor and metal submicrometer spheres, Angew Chem Int Ed Engl, 49, 6361, 10.1002/anie.201002963 Wang, 2011, Size-tailored ZnO submicrometer spheres: bottom-up construction, size-related optical extinction, and selective aniline trapping, Adv Mater, 23, 1865, 10.1002/adma.201100078 Wang, 2011, Single-crystalline rutile TiO2 hollow spheres: room-temperature synthesis, tailored visible-light-extinction, and effective scattering layer for quantum dot-sensitized solar cells, J Am Chem Soc, 133, 19102, 10.1021/ja2049463 Swiatkowska-Warkocka, 2011, Controlling exchange bias in Fe3O4/FeO composite particles prepared by pulsed laser irradiation, Nanoscale Res Lett, 6, 226, 10.1186/1556-276X-6-226 Swiatkowska-Warkocka, 2018, Tailoring of Magnetic Properties of NiO/Ni Composite Particles Fabricated by Pulsed Laser Irradiation, Nanomaterials, 8, 790, 10.3390/nano8100790 Monsa, 2019, Generation of Size-Controlled Crystalline CeO2 Particles by Pulsed Laser Irradiation in Water, J Phys Chem C, 123, 30666, 10.1021/acs.jpcc.9b08423 Li, 2011, Fabrication of Crystalline Silicon Spheres by Selective Laser Heating in Liquid Medium, Langmuir, 27, 5076, 10.1021/la200231f Zhang, 2017, Germanium Sub-Microspheres Synthesized by Picosecond Pulsed Laser Melting in Liquids: Educt Size Effects, Sci Rep, 7, 40355, 10.1038/srep40355 Wang, 2012, Gallium Phosphide Spherical Particles by Pulsed Laser Irradiation in Liquid, Sci Adv Mater, 4, 544, 10.1166/sam.2012.1305 Tsuji, 2013, Preparation and investigation of the formation mechanism of submicron-sized spherical particles of gold using laser ablation and laser irradiation in liquids, Phys Chem Chem Phys, 15, 3099, 10.1039/c2cp44159d Wang, 2013, Photomediated assembly of single crystalline silver spherical particles with enhanced electrochemical performance, J Mater Chem A, 1, 692, 10.1039/C2TA00389A Wang, 2012, General Bottom-Up Construction of Spherical Particles by Pulsed Laser Irradiation of Colloidal Nanoparticles: A Case Study on CuO, Chem Eur J, 18, 163, 10.1002/chem.201102079 Tsuji, 2021, Preparation of Binder-Free Spherical Submicron-Sized Platinum Particles Using Laser Melting in Liquids, IEEJ Transactions on Electronics, Information and Systems, 141, 755, 10.1541/ieejeiss.141.755 Lau, 2015, Inclusion of supported gold nanoparticles into their semiconductor support, Phys Chem Chem Phys, 17, 29311, 10.1039/C5CP04296H Swiatkowska-Warkocka, 2015, Synthesis of new metastable nanoalloys of immiscible metals with a pulse laser technique, Sci Rep, 5, 9849, 10.1038/srep09849 Swiatkowska-Warkocka, 2012, Synthesis of Au-Based Porous Magnetic Spheres by Selective Laser Heating in Liquid, Langmuir, 28, 4903, 10.1021/la2038334 Yoshihara, 2022, Size distribution evolution and viscosity effect on spherical submicrometer particle generation process by pulsed laser melting in liquid, Powder Technol, 404, 10.1016/j.powtec.2022.117445 Li, 2011, Preparation of silver spheres by selective laser heating in silver-containing precursor solution, Opt Express, 19, 2846, 10.1364/OE.19.002846 Li, 2011, Preparation of silver spheres by selective laser heating in silver-containing precursor solution: erratum, Opt Express, 19, 12855, 10.1364/OE.19.012855 Li, 2011, Carbon-assisted fabrication of submicrometre spheres for low-optical-absorbance materials by selective laser heating in liquid, J Mater Chem, 21, 14406, 10.1039/c1jm12696b Rehbock, 2014, Biocompatible Gold Submicrometer Spheres with Variable Surface Texture Fabricated by Pulsed Laser Melting in Liquid, Chem Lett, 43, 1502, 10.1246/cl.140455 Tsuji, 2018, Stabilizer-Concentration Effects on the Size of Gold Submicrometer-Sized Spherical Particles Prepared Using Laser-Induced Agglomeration and Melting of Colloidal Nanoparticles, J Phys Chem C, 122, 21659, 10.1021/acs.jpcc.8b05911 Tsuji, 2016, Preparation of Gold Submicron-Sized Particles Using Laser Irradiation for Gold Nanoparticles Stabilized by Carbonate, Electr Commun Jpn, 99, 64, 10.1002/ecj.11875 Tsuji, 2015, Laser Melting in Liquids Using Gold Nanoparticles Stabilized by Na2CO3, J Laser Micro/Nanoeng, 10, 329, 10.2961/jlmn.2015.03.0017 Tsuji, 2015, Preparation of submicron-sized spherical particles of gold using laser-induced melting in liquids and low-toxic stabilizing reagent, Appl Surf Sci, 348, 10, 10.1016/j.apsusc.2015.02.057 Swiatkowska-Warkocka, 2017, Various Morphologies/Phases of Gold-Based Nanocomposite Particles Produced by Pulsed Laser Irradiation in Liquid Media: Insight in Physical Processes Involved in Particles Formation, J Phys Chem C, 121, 8177, 10.1021/acs.jpcc.7b00187 Swiatkowska-Warkocka, 2013, Pulsed laser irradiation of colloidal nanoparticles: a new synthesis route for the production of non-equilibrium bimetallic alloy submicrometer spheres, RSC Adv, 3, 79, 10.1039/C2RA22119E Fuse, 2019, Determining the Composite Structure of Au-Fe-Based Submicrometre Spherical Particles Fabricated by Pulsed-Laser Melting in Liquid, Nanomaterials, 9, 198, 10.3390/nano9020198 Swiatkowska-Warkocka, 2016, Synthesis of various 3D porous gold-based alloy nanostructures with branched shapes, J Colloid Interface Sci, 483, 281, 10.1016/j.jcis.2016.08.051 Ishikawa, 2018, Guided Slow Continuous Suspension Film Flow for Mass Production of Submicrometer Spherical Particles by Pulsed Laser Melting in Liquid, Sci Rep, 8, 14208, 10.1038/s41598-018-32528-6 Ishikawa, 2010, Submicron-Sized Boron Carbide Particles Encapsulated in Turbostratic Graphite Prepared by Laser Fragmentation in Liquid Medium, J Nanosci Nanotechnol, 10, 5467, 10.1166/jnn.2010.1947 Ishikawa, 2009, Boron carbide particle fabrication by pulsed laser irradiation of boron particle dispersed in organic solvent with various wavelengths, Trans Mater Res Soc Jpn, 34, 435, 10.14723/tmrsj.34.435 Nakamura, 2015, A physicochemical process for fabricating submicrometer hollow fluorescent spheres of Tb3+-incorporated calcium phosphate, RSC Adv, 5, 22620, 10.1039/C5RA01155H Nakamura, 2016, Physicochemical fabrication of antibacterial calcium phosphate submicrospheres with dispersed silver nanoparticles via coprecipitation and photoreduction under laser irradiation, Acta Biomater, 46, 299, 10.1016/j.actbio.2016.09.015 Nakamura, 2014, A physicochemical process for fabricating submicrometre calcium iron phosphate spheres, RSC Adv, 4, 38442, 10.1039/C4RA04941A Suehara, 2021, Reduction Mechanism of Transition Metal Oxide Particles in Thermally Induced Nanobubbles during Pulsed Laser Melting in Ethanol, ChemPhysChem, 22, 675, 10.1002/cphc.202001000 Wang, 2019, Copper submicrospheres induced by pulsed laser-irradiation with enhanced tribology properties, New J Chem, 43, 13526, 10.1039/C9NJ03199E Hu, 2012, Laser-induced reshaping of particles aiming at energy-saving applications, J Mater Chem, 22, 15947, 10.1039/c2jm32041j Shakeri, 2022, Solvent-particles interactions during composite particles formation by pulsed laser melting of α-Fe2O3, Sci Rep, 12, 11950, 10.1038/s41598-022-15729-y Kihara, 2020, Fabrication of Magnetic α-Fe2O3/Fe3O4 Composite Particles by Nanosecond Laser Irradiation of α-Fe2O3 Powder in Water, Chem Lett, 49, 413, 10.1246/cl.190947 Song, 2014, Submicron-Lubricant Based on Crystallized Fe3O4 Spheres for Enhanced Tribology Performance, Chem Mater, 26, 5113, 10.1021/cm502426y Sakaki, 2019, Heating process control of pulsed-laser melting in liquid via a burst-mode laser, Appl Phys Express, 12, 10.7567/1882-0786/aaf284 Ishikawa, 2019, Spherical Particle Formation Mechanism in Pulsed Laser Melting in Liquid under Controlled-Pulse-Number Irradiation using a Slit Nozzle Flow System, J Phys Chem C, 123, 24934, 10.1021/acs.jpcc.9b06949 Ishikawa, 2016, Submicrometer-Sized Spherical Iron Oxide Particles Fabricated by Pulsed Laser Melting in Liquid, Electr Commun Jpn, 99, 37, 10.1002/ecj.11898 Luo, 2018, Green laser irradiation-stimulated fullerene-like MoS2 nanospheres for tribological applications, Tribol Int, 122, 119, 10.1016/j.triboint.2018.02.040 Han, 2017, Laser-Irradiation-Induced Melting and Reduction Reaction for the Formation of Pt-Based Bimetallic Alloy Particles in Liquids, ChemPhysChem, 18, 1133, 10.1002/cphc.201601185 Wakatsuki, 2020, Hydrofluoric acid pretreatment effect on the formation of silicon submicrometer particles by pulsed laser melting in liquid and their optical scattering property, Nanotechnology, 31, 10.1088/1361-6528/ab5617 Tabayashi, 2021, Behavior of Thermally Induced Nanobubbles during Instantaneous Particle Heating by Pulsed Laser Melting in Liquid, Langmuir, 37, 7167, 10.1021/acs.langmuir.1c00736 Nakamura, 2021, Fracture and Embedment Behavior of Brittle Submicrometer Spherical Particles Fabricated by Pulsed Laser Melting in Liquid Using a Scanning Electron Microscope Nanoindenter, Nanomaterials, 11, 10.3390/nano11092201 Sakaki, 2018, Comparison of picosecond and nanosecond lasers for the synthesis of TiN sub-micrometer spherical particles by pulsed laser melting in liquid, Appl Phys Express, 11, 10.7567/APEX.11.035001 Kawasoe, 2015, Preparation of spherical particles by laser melting in liquid using TiN as a raw material, Appl Phys B, 119, 475, 10.1007/s00340-015-6101-5 Ishikawa, 2016, Nano- and Submicrometer-Sized Spherical Particle Fabrication Using a Submicroscopic Droplet Formed Using Selective Laser Heating, J Phys Chem C, 120, 2439, 10.1021/acs.jpcc.5b10691 Luo, 2016, Smooth and solid WS2 submicrospheres grown by a new laser fragmentation and reshaping process with enhanced tribological properties, Chem Commun, 52, 10147, 10.1039/C6CC04212K Sakaki, 2018, Influence of pulse frequency on synthesis of nano and submicrometer spherical particles by pulsed laser melting in liquid, Appl Surf Sci, 435, 529, 10.1016/j.apsusc.2017.10.235 Sakaki, 2017, Pulse-Width Dependence of the Cooling Effect on Sub-Micrometer ZnO Spherical Particle Formation by Pulsed-Laser Melting in a Liquid, ChemPhysChem, 18, 1101, 10.1002/cphc.201601175 Duan, 2015, Morphology Evolution of ZnO Submicroparticles Induced by Laser Irradiation and Their Enhanced Tribology Properties by Compositing with Al2O3 Nanoparticles, Adv Eng Mater, 17, 341, 10.1002/adem.201400385 Wang, 2014, Single-crystalline ZnO spherical particles by pulsed laser irradiation of colloidal nanoparticles for ultraviolet photodetection, ACS Appl Mater Interfaces, 6, 2241, 10.1021/am500443a Tsuji, 2013, Fabrication of Spherical-Shaped Submicron Particles of ZnO Using Laser-induced Melting of Submicron-sized Source Materials, J Laser Micro/Nanoeng, 8, 292, 10.2961/jlmn.2013.03.0017 Ishikawa, 2013, Raw Particle Aggregation Control for Fabricating Submicrometer-sized Spherical Particles by Pulsed-laser Melting in Liquid, Chem Lett, 42, 530, 10.1246/cl.130044 Li, 2012, Tetragonal zirconia spheres fabricated by carbon-assisted selective laser heating in a liquid medium, Nanotechnology, 23, 10.1088/0957-4484/23/11/115602 Mende, 2003, Mechanical production and stabilization of submicron particles in stirred media mills, Powder Technol, 132, 64, 10.1016/S0032-5910(03)00042-1 Louey, 2004, Aerosol Dispersion of Respirable Particles in Narrow Size Distributions Produced by Jet-Milling and Spray-Drying Techniques, Pharm Res, 21, 1200, 10.1023/B:PHAM.0000033007.27278.60 Canelas, 2009, Top-down particle fabrication: control of size and shape for diagnostic imaging and drug delivery, Wiley Interdiscip Rev Nanomed Nanobiotechnol, 1, 391, 10.1002/wnan.40 Su, 2008, Green ceramic machining: A top-down approach for the rapid fabrication of complex-shaped ceramics, J Eur Ceram Soc, 28, 2109, 10.1016/j.jeurceramsoc.2008.02.023 Hussein, 2019, Physical, chemical and morphology characterisation of nano ceramic powder as bitumen modification, Int J Pavement Eng, 1 Tsuzuki, 2004, Mechanochemical synthesis of nanoparticles, J Mater Sci, 39, 5143, 10.1023/B:JMSC.0000039199.56155.f9 Isobe T, Hotta Y, Sato K, Watari K. Preparation of Stable Nano-sized Al2O3 Slurries Using Wet-Jet Milling. Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials: Ceramic Engineering and Science Proceedings, Volume 28, Issue 72007. p. 11-8. Chawla, 2007, State of the Art: Applications of Mechanically Alloyed Nanomaterials—A Review, Mater Manuf Processes, 22, 469, 10.1080/10426910701235900 Fouilloux, 2011, Nucleation of Silica Nanoparticles Measured in Situ during Controlled Supersaturation Increase. Restructuring toward a Monodisperse Nonspherical Shape, Langmuir, 27, 12304, 10.1021/la2013842 Rane, 2018, 5 - Methods for Synthesis of Nanoparticles and Fabrication of Nanocomposites, 121 Thanh, 2014, Mechanisms of Nucleation and Growth of Nanoparticles in Solution, Chem Rev, 114, 7610, 10.1021/cr400544s Wang, 2014, Kinetics and Mechanisms of Aggregative Nanocrystal Growth, Chem Mater, 26, 5, 10.1021/cm402139r Sun, 2017, Supercritical Hydrothermal Synthesis of Submicrometer Copper(II) Oxide: Effect of Reaction Conditions, Ind Eng Chem Res, 56, 6286, 10.1021/acs.iecr.7b00777 Gan, 2020, Hydrothermal Synthesis of Nanomaterials, J Nanomater, 2020, 8917013, 10.1155/2020/8917013 Li, 2008, Hexagonal-Close-Packed, Hierarchical Amorphous TiO2 Nanocolumn Arrays: Transferability, Enhanced Photocatalytic Activity, and Superamphiphilicity without UV Irradiation, J Am Chem Soc, 130, 14755, 10.1021/ja805077q Murugavel, 1997, Sub-micrometre spherical particles of TiO2, ZrO2 and PZT by nebulized spray pyrolysis of metal–organic precursors, J Mater Chem, 7, 1433, 10.1039/a700301c Kojima, 2016, Preparation of porous titania particles by partial dissolution and heat treatment of hydrous titania, J Ceram Soc Jpn, 124, 1226, 10.2109/jcersj2.16208 Dong, 2014, TiO2 microspheres with variable morphology, size and density synthesized by a facile emulsion-mediated hydrothermal process, Mater Lett, 123, 135, 10.1016/j.matlet.2014.03.008 Wang, 2004, Bottom-Up and Top-Down Approaches to the Synthesis of Monodispersed Spherical Colloids of Low Melting-Point Metals, Nano Lett, 4, 2047, 10.1021/nl048689j Miura, 2011, Preparation of Fe-based monodisperse spherical particles with fully glassy phase, J Alloys Compd, 509, 5581, 10.1016/j.jallcom.2011.02.044 Yamada, 2020, Uniformity of the glassy state of iron-based metallic glassy particles and reproducibility of fabricating microparts, Mater Des, 191, 10.1016/j.matdes.2020.108667 Okazaki, 2012, Ultraviolet whispering-gallery-mode lasing in ZnO micro/nano sphere crystal, Appl Phys Lett, 101, 10.1063/1.4768696 Nakamura, 2016, Synthesis of Spherical ZnO Microcrystals by Laser Ablation in Air, Electr Commun Jpn, 99, 58, 10.1002/ecj.11874 Okamoto, 2014, Fabrication of single-crystalline microspheres with high sphericity from anisotropic materials, Sci Rep, 4, 5186, 10.1038/srep05186 Minowa, 2017, Inner structure of ZnO microspheres fabricated via laser ablation in superfluid helium, Opt Express, 25, 10449, 10.1364/OE.25.010449 Saitow, 2019, Size-Selected Submicron Gold Spheres: Controlled Assembly onto Metal, Carbon, and Plastic Substrates, ACS Omega, 4, 14307, 10.1021/acsomega.9b01999 Herbani, 2011, Synthesis of Near-Monodispersed Au–Ag Nanoalloys by High Intensity Laser Irradiation of Metal Ions in Hexane, J Phys Chem C, 115, 21592, 10.1021/jp205547t Herbani, 2012, Synthesis of platinum-based binary and ternary alloy nanoparticles in an intense laser field, J Colloid Interface Sci, 375, 78, 10.1016/j.jcis.2012.02.030 Nakamura, 2013, Spectroscopic study of gold nanoparticle formation through high intensity laser irradiation of solution, AIP Adv, 3, 10.1063/1.4817827 Herlach, 1993, Containerless processing in the study of metallic melts and their solidification, Int Mater Rev, 38, 273, 10.1179/095066093790326267 Yu, 2020, Laser-Generated Supranano Liquid Metal as Efficient Electron Mediator in Hybrid Perovskite Solar Cells, Adv Mater, 32, 2001571, 10.1002/adma.202001571 Zuniga-Ibarra, 2019, Synthesis and characterization of black TiO2 nanoparticles by pulsed laser irradiation in liquid, Appl Surf Sci, 483, 156, 10.1016/j.apsusc.2019.03.302 Sharma Kanakkillam, 2021, Defects rich nanostructured black zinc oxide formed by nanosecond pulsed laser irradiation in liquid, Appl Surf Sci, 567, 150858, 10.1016/j.apsusc.2021.150858 Mills, 1998 Lee, 2020, Ballistic supercavitating nanoparticles driven by single Gaussian beam optical pushing and pulling forces, Nat Commun, 11, 2404, 10.1038/s41467-020-16267-9 Caupin, 2006, Cavitation in water: a review, C R Phys, 7, 1000, 10.1016/j.crhy.2006.10.015 Kotaidis, 2006, Excitation of nanoscale vapor bubbles at the surface of gold nanoparticles in water, J Chem Phys, 124, 10.1063/1.2187476 Siems, 2011, Thermodynamics of nanosecond nanobubble formation at laser-excited metal nanoparticles, New J Phys, 13, 10.1088/1367-2630/13/4/043018 Pustovalov, 2020, Laser melting and evaporation of nanoparticles: A simplified model for estimations of threshold fluence, Opt Laser Technol, 126, 10.1016/j.optlastec.2020.106082 Pustovalov, 2020, Model for estimations of laser threshold fluencies for photothermal bubble generation around nanoparticles, Appl Phys A, 126, 196, 10.1007/s00339-020-3370-6 Lukianova-Hleb, 2010, Plasmonic Nanobubbles as Transient Vapor Nanobubbles Generated around Plasmonic Nanoparticles, ACS Nano, 4, 2109, 10.1021/nn1000222 Lukianova-Hleb, 2014, Laser Pulse Duration Is Critical For the Generation of Plasmonic Nanobubbles, Langmuir, 30, 7425, 10.1021/la5015362 Sasaki, 2010, Liquid-phase laser ablation, Pure Appl Chem, 82, 1317, 10.1351/PAC-CON-09-10-23 Dell’Aglio, 2015, Mechanisms and processes of pulsed laser ablation in liquids during nanoparticle production, Appl Surf Sci, 348, 4, 10.1016/j.apsusc.2015.01.082 Ibrahimkutty, 2012, Nanoparticle formation in a cavitation bubble after pulsed laser ablation in liquid studied with high time resolution small angle x-ray scattering, Appl Phys Lett, 101, 10.1063/1.4750250 Matsumoto, 2015, Transfer of the Species Dissolved in a Liquid into Laser Ablation Plasma: An Approach Using Emission Spectroscopy, J Phys Chem C, 119, 26506, 10.1021/acs.jpcc.5b07769 Boutopoulos, 2015, Dynamic imaging of a single gold nanoparticle in liquid irradiated by off-resonance femtosecond laser, Nanoscale, 7, 11758, 10.1039/C5NR02721G Ziefuss, 2020, In situ structural kinetics of picosecond laser-induced heating and fragmentation of colloidal gold spheres, Phys Chem Chem Phys, 22, 4993, 10.1039/C9CP05202J Distaso, 2017, Interaction of light with hematite hierarchical structures: Experiments and simulations, J Quant Spectrosc Radiat Transfer, 189, 369, 10.1016/j.jqsrt.2016.12.028 Nichols, 2002, A review of the terms agglomerate and aggregate with a recommendation for nomenclature used in powder and particle characterization, J Pharm Sci, 91, 2103, 10.1002/jps.10191 Liu, 2015, Rapid Synthesis of Monodisperse Au Nanospheres through a Laser Irradiation -Induced Shape Conversion, Self-Assembly and Their Electromagnetic Coupling SERS Enhancement, Sci Rep, 5, 7686, 10.1038/srep07686 Sani, 2016, Spectral optical constants of ethanol and isopropanol from ultraviolet to far infrared, Opt Mater, 60, 137, 10.1016/j.optmat.2016.06.041 Hahn, 2005, Optical Absorption of Water: Coulomb Effects versus Hydrogen Bonding, Phys Rev Lett, 94, 10.1103/PhysRevLett.94.037404 Hoshimi R, Ito T, Terashima K. Synthesis of TiN spherical particles by laser melting in liquid nitrogen. The 79th JSAP Autumn Meeting 2018. Nagoya Congress Center 2018. p. 19a-PA4-7. Siebeneicher, 2020, Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles, Nanomaterials, 10, 359, 10.3390/nano10020359 Ishikawa Y, Koshizaki N, Pyatenko A. Titanium oxide sphere preparation by pulsed laser melting in liquid. Rev Laser Eng (Re-za- Kenkyu) (in Japanese). 2012;40:133-6. Filatova, 2015, Interpretation of the Changing the Band Gap of Al2O3 Depending on Its Crystalline Form: Connection with Different Local Symmetries, J Phys Chem C, 119, 20755, 10.1021/acs.jpcc.5b06843 Li, 2017, Electronic structures and optical properties of monoclinic ZrO2 studied by first-principles local density approximation + U approach, J Adv Ceram, 6, 43, 10.1007/s40145-016-0216-y Heo, 2015, Band gap and defect states of MgO thin films investigated using reflection electron energy loss spectroscopy, AIP Adv, 5, 10.1063/1.4927547 Ishikawa Y, Koshizaki N. Reactive fabrication of MgTi2O5 spherical particles by pulsed laser melting in liquid from raw particle mixture. In: 3rd Conference on Advanced Nanoparticle Generation and Excitation by Lasers in Liquids. Hotel JAL City, Matsusyama, Ehime. Japan; 2014. Vollath, 2013 Vollath, 2013, Nanoparticles - Nanocomposites Nanomaterials: An Introduction for Beginners, Wiley Liao, 2016, Sizing submicron particles from optical scattering data collected with oblique incidence illumination, Appl Opt, 55, 9440, 10.1364/AO.55.009440 Wang, 2019, Measuring the Three-Dimensional Volume Scattering Functions of Microsphere Suspension: Design and Laboratory Experiments, IEEE Photon J, 11, 6802817, 10.1109/JPHOT.2019.2940507 Maeda, 2000, Tumor vascular permeability and the EPR effect in macromolecular therapeutics: a review, J Controlled Release, 65, 271, 10.1016/S0168-3659(99)00248-5 Papaefthymiou, 2009, Nanoparticle magnetism, Nano Today, 4, 438, 10.1016/j.nantod.2009.08.006 Chakraborty, 2019, Engineering of Submicron Particles, Fundamental Concepts and Models: Wiley Ghadiri, 2020, Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis, Kona, 37, 3, 10.14356/kona.2020018 Yoshida, 2017, Effects of main particle diameter on improving particle flowability for compressed packing fraction in a smaller particle admixing system, Adv Powder Technol, 28, 2542, 10.1016/j.apt.2017.07.004 Nakamura T, Magara H, Sakaki S, Koshizaki N, Sato S. Inner structural analysis of silver submicron spherical particles fabricated by pulsed laser melting in liquid. In: 4th Conference on Advanced Nanoparticle Generation and Excitation by Lasers in Liquids (ANGEL). Essen. Germany; 2016. P52. Evlyukhin, 2012, Demonstration of Magnetic Dipole Resonances of Dielectric Nanospheres in the Visible Region, Nano Lett, 12, 3749, 10.1021/nl301594s Kuznetsov, 2016, Optically resonant dielectric nanostructures, Science, 354, 2472, 10.1126/science.aag2472 Yan, 2020, All-dielectric materials and related nanophotonic applications, Mater Sci Eng, R, 141, 10.1016/j.mser.2020.100563 Sugimoto, 2021, Colloidal Mie Resonators for All-Dielectric Metaoptics, Advanced Photonics Research, 2, 2000111, 10.1002/adpr.202000111 Sugimoto, 2021, Colloidal Mie resonant silicon nanoparticles, Nanotechnology, 32, 10.1088/1361-6528/ac1a44 Kuznetsov, 2012, Magnetic light, Sci Rep, 2, 492, 10.1038/srep00492 Terekhov, 2017, Multipolar response of nonspherical silicon nanoparticles in the visible and near-infrared spectral ranges, Phys Rev B, 96, 10.1103/PhysRevB.96.035443 Makarov, 2017, Efficient Second-Harmonic Generation in Nanocrystalline Silicon Nanoparticles, Nano Lett, 17, 3047, 10.1021/acs.nanolett.7b00392 Shi, 2012, A New Dielectric Metamaterial Building Block with a Strong Magnetic Response in the Sub-1.5-Micrometer Region: Silicon Colloid Nanocavities, Adv Mater, 24, 5934, 10.1002/adma.201201987 Li, 2016, All-Dielectric Antenna Wavelength Router with Bidirectional Scattering of Visible Light, Nano Lett, 16, 4396, 10.1021/acs.nanolett.6b01519 Shi, 2013, Monodisperse silicon nanocavities and photonic crystals with magnetic response in the optical region, Nat Commun, 4, 1904, 10.1038/ncomms2934 Melik-Gaykazyan, 2018, Selective Third-Harmonic Generation by Structured Light in Mie-Resonant Nanoparticles, ACS Photonics, 5, 728, 10.1021/acsphotonics.7b01277 Valuckas, 2017, Direct observation of resonance scattering patterns in single silicon nanoparticles, Appl Phys Lett, 110, 10.1063/1.4977570 Zaza, 2019, Size-Selective Optical Printing of Silicon Nanoparticles through Their Dipolar Magnetic Resonance, ACS Photonics, 6, 815, 10.1021/acsphotonics.8b01619 Baranov, 2017, All-dielectric nanophotonics: the quest for better materials and fabrication techniques, Optica, 4, 814, 10.1364/OPTICA.4.000814 Bao, 2017, Double-layer nanoparticle-based coatings for efficient terrestrial radiative cooling, Sol Energy Mater Sol Cells, 168, 78, 10.1016/j.solmat.2017.04.020 Huang, 2017, Nanoparticle embedded double-layer coating for daytime radiative cooling, Int J Heat Mass Transfer, 104, 890, 10.1016/j.ijheatmasstransfer.2016.08.009 Gonome, 2014, Controlling the radiative properties of cool black-color coatings pigmented with CuO submicron particles, J Quant Spectrosc Radiat Transfer, 132, 90, 10.1016/j.jqsrt.2013.02.027 Barugkin, 2016, Highly Reflective Dielectric Back Reflector for Improved Efficiency of Tandem Thin-Film Solar Cells, Int J Photoenergy, 2016, 1, 10.1155/2016/7390974 Desta, 2016, Novel back-reflector architecture with nanoparticle based buried light-scattering microstructures for improved solar cell performance, Nanoscale, 8, 12035, 10.1039/C6NR00259E Ghazyani, 2014, Dielectric core–shells with enhanced scattering efficiency as back-reflectors in dye sensitized solar cells, RSC Adv, 4, 3621, 10.1039/C3RA44079F Mendes, 2014, Colloidal plasmonic back reflectors for light trapping in solar cells, Nanoscale, 6, 4796, 10.1039/C3NR06768H Sharifi, 2015, Morphological dependence of light backscattering from metallic back reflector films: Application in dye-sensitized solar cells, Phys Status Solidi A, 212, 785, 10.1002/pssa.201431349 Dadgostar, 2012, Mesoporous Submicrometer TiO2 Hollow Spheres As Scatterers in Dye-Sensitized Solar Cells, ACS Appl Mater Interfaces, 4, 2964, 10.1021/am300329p Fujiwara, 2013, Low-threshold and quasi-single-mode random laser within a submicrometer-sized ZnO spherical particle film, Appl Phys Lett, 102, 10.1063/1.4792349 Fujiwara, 2010, Numerical Analysis of Random Lasing Properties of a Waveguide Defect within a Random Structure, Jpn J Appl Phys, 49, 10.1143/JJAP.49.112002 Nakamura, 2014, Origins of lasing emission in a resonance-controlled ZnO random laser, New J Phys, 16, 10.1088/1367-2630/16/9/093054 Niyuki, 2016, Toward single-mode random lasing within a submicrometre-sized spherical ZnO particle film, J Opt, 18, 10.1088/2040-8978/18/3/035202 Niyuki, 2017, Double threshold behavior in a resonance-controlled ZnO random laser, APL Photonics, 2, 10.1063/1.4974334 Turitsyn, 2014, Random distributed feedback fibre lasers, Phys Rep, 542, 133, 10.1016/j.physrep.2014.02.011 Soci, 2007, ZnO Nanowire UV Photodetectors with High Internal Gain, Nano Lett, 7, 1003, 10.1021/nl070111x Chen, 2011, ZnO Hollow-Sphere Nanofilm-Based High-Performance and Low-Cost Photodetector, Small, 7, 2449, 10.1002/smll.201100694 Wang, 2012, ZnO Hollow Spheres with Double-Yolk Egg Structure for High-Performance Photocatalysts and Photodetectors, Adv Mater, 24, 3421, 10.1002/adma.201201139 Messinger, 1981, Local fields at the surface of noble-metal microspheres, Phys Rev B, 24, 649, 10.1103/PhysRevB.24.649 Hayashi, 1988, Evidence for surface-enhanced Raman scattering on nonmetallic surfaces: Copper phthalocyanine molecules on GaP small particles, Phys Rev Lett, 60, 1085, 10.1103/PhysRevLett.60.1085 Ji, 2019, Enhanced Raman Scattering by ZnO Superstructures: Synergistic Effect of Charge Transfer and Mie Resonances, Angew Chem Int Ed, 58, 14452, 10.1002/anie.201907283 Alessandri, 2016, Enhanced Raman Scattering with Dielectrics, Chem Rev, 116, 14921, 10.1021/acs.chemrev.6b00365 Rodriguez, 2014, Silicon nanoparticles as Raman scattering enhancers, Nanoscale, 6, 5666, 10.1039/C4NR00593G Assadillayev, 2021, Plasmon Launching and Scattering by Silicon Nanoparticles, ACS Photonics, 8, 1582, 10.1021/acsphotonics.0c01554 Sakamoto, 2021, Large Field Enhancement of Nanocoral Structures on Porous Si Synthesized from Rice Husks, ACS Appl Mater Interfaces, 13, 1105, 10.1021/acsami.0c14248 Tsuji, 2019, A method to selectively internalise submicrometer boron carbide particles into cancer cells using surface transferrin conjugation for developing a new boron neutron capture therapy agent, J Exp Nanosci, 15, 1, 10.1080/17458080.2019.1692178 Kozień, 2021, Boron-Rich Boron Carbide Nanoparticles as a Carrier in Boron Neutron Capture Therapy: Their Influence on Tumor and Immune Phagocytic Cells, Materials, 14, 3010, 10.3390/ma14113010 Zaboronok, 2022, Polymer-Stabilized Elemental Boron Nanoparticles for Boron Neutron Capture Therapy: Initial Irradiation Experiments, Pharmaceutics, 14, 761, 10.3390/pharmaceutics14040761 Wróblewska, 2021, Boron-rich nanoparticles as potential carriers in boron-neutron capture therapy (in Polish), Adv Hyg Exp Med, 75, 122 Nakamura, 2016, Physicochemical fabrication of calcium phosphate-based thin layers and nanospheres using laser processing in solutions, J Mater Chem B, 4, 6289, 10.1039/C6TB01362G Luo, 2018, Laser Irradiation-Induced SiC@Graphene Sub-Microspheres: A Bioinspired Core-Shell Structure for Enhanced Tribology Properties, Adv Mater Interfaces, 5, 1700839, 10.1002/admi.201700839 Luo, 2018, Laser irradiation-induced laminated graphene/MoS2 composites with synergistically improved tribological properties, Nanotechnology, 29, 10.1088/1361-6528/aabcf5 Jendrzej, 2019, Tribological properties of laser-generated hard ceramic particles in a gear drive contact, Appl Surf Sci, 467–468, 811, 10.1016/j.apsusc.2018.10.060 Romeis, 2014, Correlation of Enhanced Strength and Internal Structure for Heat-Treated Submicron Stöber Silica Particles, Part Part Syst Char, 31, 664, 10.1002/ppsc.201300306 Paul, 2015, In situ cracking of silica beads in the SEM and TEM — Effect of particle size on structure–property correlations, Powder Technol, 270, 337, 10.1016/j.powtec.2014.10.026 Paul, 2014, A review of models for single particle compression and their application to silica microspheres, Adv Powder Technol, 25, 136, 10.1016/j.apt.2013.09.009 Herre, 2017, Deformation behavior of nanocrystalline titania particles accessed by complementary in situ electron microscopy techniques, J Am Ceram Soc, 100, 5709, 10.1111/jace.15072 Kondo, 2018, High-Strength Sub-Micrometer Spherical Particles Fabricated by Pulsed Laser Melting in Liquid, Part Part Syst Char, 35, 1800061, 10.1002/ppsc.201800061 Semaltianos, 2021, Laser Synthesis of Magnetic Nanoparticles in Liquids and Application in the Fabrication of Polymer-Nanoparticle Composites, ACS Appl Nano Mater, 4, 6407, 10.1021/acsanm.1c00715 Liang, 2013, A microfibre assembly of an iron-carbon composite with giant magnetisation, Sci Rep, 3, 3051, 10.1038/srep03051 Liang, 2014, Fabrication of One-Dimensional Chain of Iron-Based Bimetallic Alloying Nanoparticles with Unique Magnetizations, Cryst Growth Des, 14, 5847, 10.1021/cg501079a Hupfeld, 2020, Manipulation of the Size and Phase Composition of Yttrium Iron Garnet Nanoparticles by Pulsed Laser Post-Processing in Liquid, Molecules, 25, 1869, 10.3390/molecules25081869 Messina, 2016, Tuning the Composition of Alloy Nanoparticles Through Laser Mixing: The Role of Surface Plasmon Resonance, J Phys Chem C, 120, 12810, 10.1021/acs.jpcc.6b01465 Yaqoob, 2020, Gold, Silver, and Palladium Nanoparticles: A Chemical Tool for Biomedical Applications, Front Chem, 8, 376, 10.3389/fchem.2020.00376 Neumann, 2015, Nanoparticle-Mediated, Light-Induced Phase Separations, Nano Lett, 15, 7880, 10.1021/acs.nanolett.5b02804 Kojima, 2020, Laser-induced nano-heater performance of B4C submicrometer spherical particles fabricated by pulsed laser melting in liquid, Appl Nanosci, 10, 1853, 10.1007/s13204-020-01276-3 Hemmer, 2016, Exploiting the biological windows: current perspectives on fluorescent bioprobes emitting above 1000 nm, Nanoscale Horiz, 1, 168, 10.1039/C5NH00073D Burger, 2016, Review of thermal conductivity in composites: Mechanisms, parameters and theory, Prog Polym Sci, 61, 1, 10.1016/j.progpolymsci.2016.05.001 Xu, 2020, Black BiVO4: size tailored synthesis, rich oxygen vacancies, and sodium storage performance, J Mater Chem A, 8, 1636, 10.1039/C9TA13021G Forsythe, 2021, Pulsed Laser in Liquids Made Nanomaterials for Catalysis, Chem Rev, 121, 7568, 10.1021/acs.chemrev.0c01069 Filice, 2020, TiO2 Colloids Laser-Treated in Ethanol for Photocatalytic H2 Production, ACS Appl Nano Mater, 3, 9127, 10.1021/acsanm.0c01783 Filice, 2017, Laser processing of TiO2 colloids for an enhanced photocatalytic water splitting activity, J Colloid Interface Sci, 489, 131, 10.1016/j.jcis.2016.08.013 Li, 2022, Preparation of spherical silver and tin dioxide nanocomposites with the high photocatalytic performance by laser-induced deposition in liquid medium, J Alloys Compd, 900, 10.1016/j.jallcom.2021.163522 Saeki, 2015, Wet separation between palladium(II) and molybdenum(IV) ions by using laser-induced particle formation: Enhancement of recovery efficiency of palladium by laser condition, J Photochem Photobiol, A, 299, 189, 10.1016/j.jphotochem.2014.11.022 Asai, 2016, Determination of 107Pd in Pd Recovered by Laser-Induced Photoreduction with Inductively Coupled Plasma Mass Spectrometry, Anal Chem, 88, 12227, 10.1021/acs.analchem.6b03286 Asai, 2019, Determination of 107Pd in Pd purified by selective precipitation from spent nuclear fuel by laser ablation ICP-MS, Anal Bioanal Chem, 411, 973, 10.1007/s00216-018-1527-3 Yamauchi, 2008, Nanosize Effects on Hydrogen Storage in Palladium, J Phys Chem C, 112, 3294, 10.1021/jp710447j Bardhan, 2013, Uncovering the intrinsic size dependence of hydriding phase transformations in nanocrystals, Nat Mater, 12, 905, 10.1038/nmat3716 Wadell, 2014, Thermodynamics of hydride formation and decomposition in supported sub-10nm Pd nanoparticles of different sizes, Chem Phys Lett, 603, 75, 10.1016/j.cplett.2014.04.036 Sato, 2019, Studies for development of hydrogen isotope occlusion material using palladium for nuclear fusion reactors and its deterioration (in Japanese), 01P83. Kanaya, 1972, Penetration and energy-loss theory of electrons in solid targets, J Phys D: Appl Phys, 5, 43, 10.1088/0022-3727/5/1/308 Watanabe, 2010, A Molecular Dynamics Study of Thermodynamic and Kinetic Properties of Solid-Liquid Interface for Bcc Iron, ISIJ Int, 50, 1158, 10.2355/isijinternational.50.1158 Shibuta, 2015, Homogeneous nucleation and microstructure evolution in million-atom molecular dynamics simulation, Sci Rep, 5, 13534, 10.1038/srep13534 Shibuta, 2016, Submicrometer-scale molecular dynamics simulation of nucleation and solidification from undercooled melt: Linkage between empirical interpretation and atomistic nature, Acta Mater, 105, 328, 10.1016/j.actamat.2015.12.033 Deb Nath, 2017, A Molecular Dynamics Study of Partitionless Solidification and Melting of Al–Cu Alloys, ISIJ Int, 57, 1774, 10.2355/isijinternational.ISIJINT-2017-221 Shibuta, 2017, Heterogeneity in homogeneous nucleation from billion-atom molecular dynamics simulation of solidification of pure metal, Nat Commun, 8, 10, 10.1038/s41467-017-00017-5 Litmanovich, 2010, The problem of bimodal distributions in dynamic light scattering: Theory and experiment, Polymer Sci Ser A, 52, 671, 10.1134/S0965545X10060143 Eitel, 2020, A Hitchhiker’s Guide to Particle Sizing Techniques, Langmuir, 36, 10307, 10.1021/acs.langmuir.0c00709 De Temmerman, 2014, Size measurement uncertainties of near-monodisperse, near-spherical nanoparticles using transmission electron microscopy and particle-tracking analysis, J Nanopart Res, 16, 2628, 10.1007/s11051-014-2628-3 Letzel, 2018, Primary particle diameter differentiation and bimodality identification by five analytical methods using gold nanoparticle size distributions synthesized by pulsed laser ablation in liquids, Appl Surf Sci, 435, 743, 10.1016/j.apsusc.2017.11.130 Takai, 2020, Automated iterative batch processing of submicrometer spherical particles by pulsed laser melting in liquid, Chem Eng Sci, 219, 10.1016/j.ces.2020.115580 Zerebecki, 2020, Continuous-Flow Flat Jet Setup for Uniform Pulsed Laser Postprocessing of Colloids, J Phys Chem A, 124, 11125, 10.1021/acs.jpca.0c08787 Budiyanto, 2021, Impact of Single-Pulse, Low-Intensity Laser Post-Processing on Structure and Activity of Mesostructured Cobalt Oxide for the Oxygen Evolution Reaction, ACS Appl Mater Interfaces, 13, 51962, 10.1021/acsami.1c08034 Yang, 2013, A top–down strategy towards monodisperse colloidal lead sulphide quantum dots, Nat Commun, 4, 1695, 10.1038/ncomms2637 Luo, 2015, Direct Conversion of Bulk Metals to Size-Tailored, Monodisperse Spherical Non-Coinage-Metal Nanocrystals, Angew Chem Int Ed, 54, 4787, 10.1002/anie.201411322 Yamazaki, 2020, Rate coefficient of CO2 splitting in recombining H2 and He plasmas with ultralow electron temperatures, Plasma Sources Sci Technol, 29, 10.1088/1361-6595/aba722 Yasuda, 2018, Influence of Processing Conditions for Nickel Particles Prepared by Pulsed Microwave Heating in Liquid, Mater Trans, JIM, 59, 1616, 10.2320/matertrans.MAW201807 Shih, 2017, Atomistic modeling of nanoparticle generation in short pulse laser ablation of thin metal films in water, J Colloid Interface Sci, 489, 3, 10.1016/j.jcis.2016.10.029 Huang, 2021, Atomistic View of Laser Fragmentation of Gold Nanoparticles in a Liquid Environment, J Phys Chem C, 125, 13413, 10.1021/acs.jpcc.1c03146