Pulp and paper mill wastes: utilizations and prospects for high value-added biomaterials

Abdullah R, Ishak CF, Kadir WR, Bakar RA (2015) Characterization and feasibility assessment of recycled paper mill sludges for land application in relation to the environment. Int J Environ Res Public Health 12:9314–9329

Aguayo MG, Fernández pérez A, Reyes G, Oviedo C, Gacitua W, Gonzalez R, Uyarte O (2018) Isolation and characterization of cellulose nanocrystals from rejected fibers originated in the kraft pulping process. Polymers 10:1145

Ai T, Dong X, Ai D (2007) Process for causticizing green liquor in chemical recovery from black liquor in alkaline pulping. Google Patents, London

Akampumuza O, Wambua PM, Ahmed A, Li W, Qin XH (2017) Review of the applications of biocomposites in the automotive industry. Polym Compos 38:2553–2569

Akbari M, Oyedum AO, Jain S, Kumar A (2018) Options for the conversion of pulp and paper mill by-products in Western Canada. Sustainable Energy Technol Assess 26:83–92

Albuquerque A, Scalize PS, Ferreira NC, Silva F (2015) Multi-criteria analysis for site selection for the reuse of reclaimed water and biosolids. Revista Ambiente Água 10:22–34

Al-Dajani WW, Tschirner UW (2008) Pre-extraction of hemicelluloses and subsequent kraft pulping Part I: alkaline extraction. Bioprod Biosyst Eng 18:54

Alen R (2019) Chapter 3A-pulp mills and wood-based biorefineries. Industrial Biorefineries & White Biotechnology, de Pandey, A., Hofer, R., Larroche, C., Taherzadeh, M., Nampoothiri, M, 91–126.

Angevine PA (1998) Process for removing and washing dregs from green liquor in a kraft pulp mill. Google Patents, London

Armstrong AD, Bentley KM, Galeano SF, Olszewski RJ, Smith GA, Smith JR (1998) The pulp and paper industry. Ecol Ind 12:86

Asmare G (2017) Pulp production and optimization from cotton stalks. Berhan Int Res J Sci Hum 1:18–29

Bahar K, Zeynep C, Orhan I (2011) Pollution prevention in the pulp and paper industries. Environ Manag Pract 5:223–246

Bajpai P (2011) Environmentally-friendly production of pulp and paper. Wiley

Bajpai P (2013) Pulp bleaching and bleaching effluents. Springer, Bleach Plant Effluents from the Pulp and Paper Industry

Bajpai P (2015c) Green chemistry and sustainability in pulp and paper industry. Springer

Bajpai P (2015d) Management of pulp and paper mill waste. Springer

Bajpai P (2015a) Basic overview of the pulp and paper manufacturing process. Green chemistry and sustainability in pulp and paper industry. Springer, Berlin

Bajpai P (2015b) Generation of waste in pulp and paper mills. Springer, Management of Pulp and Paper Mill Waste

Bajpai P (2018b) Brief description of the pulp and papermaking process. Springer, Biotechnology for pulp and paper processing

Bajpai P (2018a) Biermann’s handbook of pulp and paper: paper and board making, vol 2. Elsevier, New York

Bajwa D, Pourhashem G, Ullah A, Bajwa S (2019) A concise review of current lignin production, applications, products, and their environmental impact. Ind Crops Prod 139:111526

Bank W (1999) Pollution prevention and abatement handbook, 1998: Toward cleaner production. The World Bank, London

Bengtsson A, Bengtsson J, Olsson C, Sedin M, Jedvert K, Theliander H, Sjoholm E (2018) Improved yield of carbon fibres from cellulose and kraft lignin. Holzforschung 72:1007–1016

Bengtsson A, Bengtsson J, Sedin M, Sjoholm E (2019) Carbon fibers from lignin-cellulose precursors: effect of stabilization conditions. ACS Sustainable Chem Eng 7:8440–8448

Bird M, Talberth J (2008) Waste stream reduction and re-use in the pulp and paper sector. Center for Sustainable Economy, New Mexico

Brannvall E (2009) Overview of pulp and paper processes. Pulp Chem Technol 2:1–13

Cabreha MN (2017) Pulp mill wastewater: characteristics and treatment. Biol Wastewater Treat Resour Recov 15:119–139

Camberato J, Gagnon B, Angers D, Chantigny M, Pan W (2006) Pulp and paper mill by-products as soil amendments and plant nutrient sources. Can J Soil Sci 86:641–653

Carroll B, Turpin T (2002) Environmental impact assessment handbook: A practical guide for planners, developers, and communities. Thomas Telford, Berlin

Chakar FS, Raguaskas AJ (2004) Review of current and future softwood kraft lignin process chemistry. Ind Crops Prod 20:131–141

Chen K (2012) Bio-renewable fibers extracted from lignin/polylactide (PLA) blend. Mater Sci 1:1. https://doi.org/10.31274/ETD-180810-385

Cherian C, Siddiqua S (2019) Pulp and paper mill fly ash: A review. Sustainability 11:4394

Clemons C (2016) Nanocellulose in spun continuous fibers: a review and future outlook. J Renewable Mater 4:327–339

De Alda JAO (2008) Feasibility of recycling pulp and paper mill sludge in the paper and board industries. Resour Conserv Recycl 52:965–972

Dessbesell L, Paleologuo M, Leitch M, Pulkki R, Xu CC (2020) Global lignin supply overview and kraft lignin potential as an alternative for petroleum-based polymers. Renew Sustain Energy Rev 123:109768

Diep NQ, Sakanishi K, Nakagoshi N, Fujimoto S, Minowa T, Tran XD (2012) Biorefinery: concepts, current status, and development trends. Int J Biomass Renew 2:1–8

Diesen M, Yhdistys SP-I, Press T, Oy F (1998) Economics of the pulp and paper industry. Fapet oy Helsinki, New York

Dimmel D, Gellerstedt G (2009) 10 Chemistry of alkaline pulping. Lignin Lign 15:349

Đurdevic D, Trstenjak M, Hulenic I (2020) Sewage Sludge Thermal Treatment Technology Selection by Utilizing the Analytical Hierarchy Process. Water 12:1255

El-Meligy MG, El-Zawawy WK, Ibrahim MM (2004) Lignocellulosic composite. Polym Adv Technol 15:738–745

Enayati AA, Hamzeh Y, Mershokriei SA, Molaii M (2009) Papermaking potential of canola stalks. BioResources 4:245–256

Environmental I (2007) Health, and safety guidelines–pulp and paper mills. International Finance Corporation, World Bank Group, Washington

Eugenio ME, Ibarra D, Martin-Sampedro R, Espinosa E, Bascon I, Rodriguez A (2019) Alternative raw materials for pulp and paper production in the concept of a lignocellulosic biorefinery. Cellulose 12:78

Faubert P, Barnabe S, Bounchard S, Cote R, Villeneuve C (2016) Pulp and paper mill sludge management practices: What are the challenges to assess the impacts on greenhouse gas emissions? Resour Conserv Recycl 108:107–133

Feng X, Meng X, Zhao J, Miao M, Shi L, Zhang S, Fang J (2015) Extraction and preparation of cellulose nanocrystals from dealginate kelp residue: structures and morphological characterization. Cellulose 22:1763–1772

Fernandez-Rodriguez J, Erdocia X, Hernandez-Ramos F, Alriols MG, Labidi J (2019) Lignin separation and fractionation by ultrafiltration. Separation of functional molecules in food by membrane technology. Elsevier, London

Gavrilescu D (2004) Solid waste generation in kraft pulp mills. Environ Eng Manag J 3:87

Gavrilescu D, Puitel AC, Dutuc G, Craciun G (2012) Environmental impact of pulp and paper mills. Environ Eng Manage J 11:81–85

Gbenebor OP, Adeosun SO (2019) Lignin conversion to carbon fibre. Sustainable lignin for carbon fibers: principles, techniques, and applications. Springer, Berlin

Gellerstedt G (2009) Chemistry of chemical pulping. Pulp Chem Technol 2:91–120

Gibril ME, Lekha P, Andrew J, Sithole B, Tesfaye T, Ramjugernath D (2018) Beneficiation of pulp and paper mill sludge: Production and characterization of functionalized crystalline nano-cellulose. Clean Technol Environ Policy 20:1835–1845

Gopal P, Sivaram N, Barik D (2019) Paper industry wastes and energy generation from wastes. Energy from toxic organic waste for heat and power generation. Elsevier, Berlin

Gordobil O, Delucis R, Egues I, Labidi J (2015) Kraft lignin as filler in PLA to improve ductility and thermal properties. Ind Crops Prod 72:46–53

Gupta GK, Liu H, Shukla P (2019) Pulp and paper industry-based pollutants, their health hazards, and environmental risks. Current Opinion in Environmental Science & Health 12:48–56

Hammett A, Youngs RL, Sun X, Chandra M (2001) Pulp and paper industry"? Holzforschung 55:219–224

Hubbe MA, Alen R, Paleologou M, Kannangara M, Kihlman J (2019) Lignin recovery from spent alkaline pulping liquors using acidification, membrane separation, and related processing steps: A review. BioResources 14:2300–2351

Huber P, Burnet A, Petit-Conil M (2014) Scale deposits in kraft pulp bleach plants with reduced water consumption: A review. J Environ Manage 141:36–50

Ince BK, Cetecioglu Z, Ince O (2011) Pollution prevention in the pulp and paper industries. Environ Manag Pract 15:224–246

Ismail, I. & Nizami, A. 2016. Waste-based biorefineries in developing countries: an imperative need of time. In: Canadian society for civil engineering: 14th international environmental specialty conference, in London, Ontario, Canada, 1–4.

Jahan MS, Nasima Chowdhury D, Islam MK, Moynul Hasan A (2004) Kraft pulping of Bangladeshi cotton stalks. Bangl J Sci Ind Res 39:139–146

Jiang Y-T, Zhuang XW, Pan X (2009) Preparation of imitated wood composites from sawdust and lignin. Biomass Chem Eng 4:79

Karak T, Bhagat R, Bhattacharyya P (2012) Municipal solid waste generation, composition, and management: the world scenario. Crit Rev Environ Sci Technol 42:1509–1630

Kihlman M (2012) Dissolution of cellulose for textile fiber applications. Karlstad University Press, Karlstad

Kim HC, Kim J (2019) Waste paper: a potential source for cellulose nanofiber and bio-nanocomposite applications. Springer, Berlin

Kinnarinen T, Golmaei M, Jernstrom E, Hakkinen A (2016) Separation, treatment, and utilization of inorganic residues of chemical pulp mills. J Cleaner Prod 133:953–964

Landrigan PJ, Fuller R (2015) Global health and environmental pollution. Springer

Leponiemi A (2008) Non-wood pulping possibilities-a challenge for the chemical pulping industry. Appita Technol Innov Manufact Environ 61:234

Lin X, Wu Z, Zhang C, Liu S, Nie S (2018) Enzymatic pulping of lignocellulosic biomass. Ind Crops Prod 120:16–24

Liu YX, Sun B, Zhu Y, Li TZ (2012) Hemicelluloses separation from black liquor. Advanced materials research. Trans Tech Publ 54:589–593

Liu Z, Wang H, Hui L (2018) Pulping and papermaking of non-wood fibers. Pulp Pap Process 15:44

Lwako M, Byaruhanga J, Babtist K (2013) A review on pulp manufacture from non-wood plant materials. Int J Chem Eng Appl 4:144–148

Ma X, Huang L, Chen Y, Chen L (2011) Preparation of bamboo dissolving pulp for textile production; Part 1. Study on pre-hydrolysis of green bamboo for producing dissolving pulp. BioResources 6:1428–1439

Manesh ME (2012) Utilization of pulp and paper mill sludge as filler in nylon biocomposite production. Springer, Berlin

Mckinnon A (2010) Environmental sustainability. Green logistics: improving the environmental sustainability of logistics. Wiley, London

Mikkanen P (2000) Fly ash particle formation in kraft recovery boilers. VTT Public 4:1

Mladenov M, Pelovski Y (2010) Utilization of wastes from the pulp and paper industry. J Univ Chem Technol Metallu 45:33–38

Mohammadkasemi F (2018) Papermaking waste sludge fiber-cement composite panel: stabilization and solidification of high FE and TI content-petrochemical ash. Cerne 24:303–311

Monte MC, Fuente E, Blanco A, Negro C (2009) Waste management from pulp and paper production in the European Union. Waste Manage 29:293–308

Naqvi M, Yan J, Froling M (2010b) Bio-refinery system of DME or CH4 production from black liquor gasification in pulp mills. Biores Technol 101:937–944

Naqvi M, Yan J, Dahlquist E (2010a) Black liquor gasification integrated in pulp and paper mills: A critical review. Biores Technol 101:8001–8015

Norberg I (2012) Carbon fibers from kraft lignin. KTH Royal Institute of Technology, Stockholm

Novais RM, Carvalheiras J, Senff L, Labrincha J (2018) Upcycling unexplored dregs and biomass fly ash from the paper and pulp industry in the production of eco-friendly geopolymer mortars: A preliminary assessment. Constr Build Mater 184:464–472

Olsson C, Sjoholm E, Reimanna A (2017) Carbon fibers from precursors produced by dry-jet wet-spinning of kraft lignin blended with kraft pulps. Holzforschung 71:275–283

Osman Khider T, Omer S, Taha O, Kamal Shomeina S (2012) Suitability of sudanese cotton stalks for alkaline pulping with additives. Iran J Energy Environ 3:15–45

Pati RK, Vrat P, Kumar P (2008) A goal programming model for paper recycling system. Omega 36:405–417

Quina MJ, Pinheiro CT (2020) Inorganic Waste Generated in Kraft Pulp Mills: The Transition from Landfill to Industrial Applications. Appl Sci 10:2317

Ragauskas A (2002) Biotechnology in the pulp and paper industry A challenge for change. Prog Biotechnol Amsterdam 15:7–12

Rajamma R, LabrinchaA JA, Ferreira VM (2012) Alkali activation of biomass fly ash–metakaolin blends. Fuel 98:265–271

Rajput D, Bhagade S, Raut S, Ralegaonkar R, Mandavgane SA (2012) Reuse of cotton and recycle paper mill waste as a building material. Constr Build Mater 34:470–475

Rashmi S, Bhardwaj Nishi K (2010) Enzymatic refining of pulps: an overview. APPTA J 22:109–116

Raut S, Sedmake R, Dhunde S, Ralegaonkar R, Mandavgane SA (2012) Reuse of recycle paper mill waste in energy-absorbing lightweight bricks. Constr Build Mater 27:247–251

Ritchlin DB (2012) The pulp pollution primer. Watershed Sentinel, Canada

Saeli M, Tobaldi DM, Seabra MP, Labrincha JA (2019) Mix design and mechanical performance of geo-polymeric binders and mortars using biomass fly ash and alkaline effluent from the paper-pulp industry. J Cleaner Prod 208:1188–1197

Sakai S, Sawell S, Chandler A, Eighmy T, Kosson D, Vehlow J, Van Der Sloot H, Hartlen J, Hjelmar O (1996) World trends in municipal solid waste management. Waste Manag 16:45

Santos RB, Capanema EA, Balakshin MY, Chang H-M, Jameel H (2011) Effect of hardwoods characteristics on the kraft pulping process: emphasis on lignin structure. BioResources 6:3623–3637

Sarkar R, Kurar R, Gupta AK, Mudgal A, Guptal V (2017) Use of paper mill waste for brick making. Cogent Engineering 4:1405768

Scheepers GP, Du Toit B (2016) Potential use of wood ash in South African forestry: a review. Southern Forests: A Journal of Forest Science 78:255–266

Schorr D, Diouf PN, Stevanovic T (2014) Evaluation of industrial lignins for biocomposites production. Ind Crops Prod 52:65–73

Simao L, Hotza D, Raupp-Pereira F, Labrincha J, Montedo O (2018) Wastes from pulp and paper mills-a review of generation and recycling alternatives. Cerâmica 64:443–453

Simao L, Hotza D, Raupp-Pereira F, Labrincha JA, Montedo OR (2019) Characterization of pulp and paper mill waste for the production of waste-based cement. Revista Internacional De Contaminación Ambiental 35:237–246

Singh AK, Chandra R (2019) Pollutants released from the pulp paper industry: Aquatic toxicity and their health hazards. Aquat Toxicol 211:202–216

Singhvi M, Zinjarde S, Gokhale D (2019) Polylactic acid: synthesis and biomedical applications. J Appl Microbiol 127:1612–1626

Sjostrom E, Westermark U (1999) Chemical composition of wood and pulps: basic constituents and their distribution. Analytical methods in wood chemistry, pulping, and papermaking. Springer, Berlin

Song K, Zhu X, Zhu W, Li X (2019) Preparation and characterization of cellulose nanocrystal extracted from Calotropis Procera biomass. Bioresour Bioprocess 6:1–8

Soucy J, Koubaa A, Migneault S, Riedl B (2014) The potential of paper mill sludge for wood-plastic composites. Ind Crops Prod 54:248–256

Souto F, Calado V, Pereira N (2018) Lignin-based carbon fiber: a current overview. Mater Res Express 5:072001

Souza AGD, Kano FS, Bonvent JJ, Rosa DDS (2017) Cellulose nanostructures obtained from waste paper industry: a comparison of acid and mechanical isolation methods. Mater Res 20:209–214

Srinivasakannan C, Bakar MZA (2004) Production of activated carbon from rubberwood sawdust. Biomass Bioenerg 27:89–96

Stoklosa RJ (2014) Fractionation and characterization of solubilized biopolymers from alkaline pulping liquors. Michigan State University, London

Tutus A, Ezici AC, Ates S (2010) Chemical, morphological and anatomical properties and evaluation of cotton stalks (Gossypium hirsutum L.) in the pulp industry. Sci Res Essays 5:1553–1560

Vakkilainen EK (2016) Steam generation from biomass: construction and design of large boilers. Butterworth-Heinemann

Vakkilainen E, Valimaki E (2009) Effect of lignin separation to black liquor and recovery boiler operation lignin from kraft black liquor. Pulping Environ 5:1–18

Viel M, Collet F, Lanos C (2020) Effect of compaction on multi-physical properties of hemp-black liquor composites. J Mater Res Technol 5:246

Walker JCF (2004) Method of selecting wood for chemical pulping. Google Patents, London

Woiciechowski AL, Neto CJD, De Souza Vandenberghe LP, De Carvalho Neto DP, Sydeny ACN, Letti LAJ, Karp SG, Torres LAZ, Soccol CR (2020) Lignocellulosic biomass: Acid and alkaline pretreatments and their effects on biomass recalcitrance–Conventional processing and recent advances. Bioresour Technol 304:122848

Woodings C (2001) Regenerated cellulose fibers. Elsevier

Xinde T (1996) Extraction of lignin in paper-mill black liquor by acidification. Res Environ Sci 4:87

Yang L, Liu S (2005) Kinetic model for kraft pulping process. Ind Eng Chem Res 44:7078–7085

Yang S, Yang B, Duan C, Fuller DA, Wang X, Chowdhury SP, Stavik J, Zhang H (2019b) Applications of enzymatic technologies to the production of high-quality dissolving pulp: a review. Biores Technol 281:440–448

Yang J, Ching YC, Chuah CH (2019a) Applications of lignocellulosic fibers and lignin in bioplastics: A review. Polymers 11:751

Yoon-Moon C, Naik TR (2005) Concrete with paper industry fibrous residuals: mixture proportioning. ACI Mater J 102:237

Zhang Q, Khan MU, Lin X, Yi W, Lei H (2020) Green-composites produced from waste residue in pulp and paper industry: a sustainable way to manage industrial wastes. J Clean Prod 121:251