Providing a virtual material for simple estimation of fracture in U-notched highly orthotropic specimens with nonlinear behavior under mixed mode I/II loading

Waddoups, 1971, Macroscopic fracture mechanics of advanced composite materials, J. Compos. Mater., 5, 446, 10.1177/002199837100500402 Mar, 1977, Fracture mechanics correlation for tensile failure of filamentary composites with holes, J. Aircraft, 14, 703, 10.2514/3.44618 Mar, 1977, Fracture of boron/aluminum composites with discontinuities, J. Compos. Mater., 11, 405, 10.1177/002199837701100404 C. Poe Jr, J. Sova, Fracture toughness of boron/aluminum laminates with various proportions of 0 deg and plus or minus 45 deg, in, 1980. Whitney, 1974, Stress fracture criteria for laminated composites containing stress concentrations, J. Compos. Mater., 8, 253, 10.1177/002199837400800303 R.F. Karlak, Hole effects in a related series of symmetrical laminates, in: Proceedings of the Fourth Joint ASM-Metallurgical Society of AIME Symposium on Failure Modes in Composites, 1977, 1977, pp. 105-117. Pipes, 1980, Macroscopic fracture of fibrous composites, Mater. Sci. Eng., 45, 247, 10.1016/0025-5416(80)90153-6 Kim, 1995, Notched strength and effective crack growth in woven fabric laminates, J Compos Mater, 29, 982, 10.1177/002199839502900706 Aronsson, 1986, Tensile fracture of laminates with cracks, J. Compos. Mater., 20, 287, 10.1177/002199838602000305 Backlund, 1986, Tensile fracture of laminates with holes, J. Compos. Mater., 20, 259, 10.1177/002199838602000304 Eriksson, 1990, Strength of tensile loaded graphite/epoxy laminates containing cracks, open and filled holes, J. Compos. Mater., 24, 456, 10.1177/002199839002400501 Nguyen, 1997, Three-dimensional modeling of damage in laminated composites containing a central hole, J. Compos. Mater., 31, 1672, 10.1177/002199839703101701 Renard, 1993, Influence of transverse cracking on ply behavior: introduction of a characteristic damage variable, Compos. Sci. Technol., 46, 29, 10.1016/0266-3538(93)90078-U Ladeveze, 1992, A damage computational method for composite structures, Comput. Struct., 44, 79, 10.1016/0045-7949(92)90226-P Afaghi-Khatibi, 1996, Effective crack growth and residual strength of composite laminates with a sharp notch, J. Compos. Mater., 30, 333, 10.1177/002199839603000303 Afaghi-Khatibi, 1996, An effective crack growth model for residual strength evaluation of composite laminates with circular holes, J. Compos. Mater., 30, 142, 10.1177/002199839603000201 Lessard, 1991, Damage tolerance of laminated composites containing an open hole and subjected to compressive loadings: Part II—Experiment, J. Compos. Mater., 25, 44, 10.1177/002199839102500102 Lawcock, 1997, Progressive damage and residual strength of a carbon fibre reinforced metal laminate, J. Compos. Mater., 31, 762, 10.1177/002199839703100802 Anaraki, 2010, Mixed mode fracture criterion for wood based on a reinforcement microcrack damage model, Mater. Sci. Eng., A, 527, 7184, 10.1016/j.msea.2010.08.004 Reiterer, 2002, Fracture characteristics of different wood species under mode I loading perpendicular to the grain, Mater. Sci. Eng., A, 332, 29, 10.1016/S0921-5093(01)01721-X Torabi, 2019, Notch failure in laminated composites under opening mode: The Virtual Isotropic Material Concept, Compos. B Eng., 172, 61, 10.1016/j.compositesb.2019.05.029 Torabi, 2019, Extension of the virtual isotropic material concept to mixed mode I/II loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens, Compos. B Eng., 176, 10.1016/j.compositesb.2019.107287 Torabi, 2019, Failure analysis of round-tip V-notched laminated composite plates under mixed mode I/II loading, Theor. Appl. Fract. Mech., 104, 10.1016/j.tafmec.2019.102342 Torabi, 2019, On the ability of the notch fracture mechanics in predicting the last-ply-failure of blunt V-notched laminated composite specimens: A hard problem can be easily solved by conventional methods, Eng. Fract. Mech., 217, 10.1016/j.engfracmech.2019.106534 Torabi, 2020, Experimental verification of the virtual isotropic material concept for the last-ply-failure of U-notched quasi-isotropic E-glass/epoxy composite laminates under tension-shear loading, J. Ind. Text. Sánchez, 2021, Critical Load Prediction in Notched E/Glass–Epoxy-Laminated Composites Using the Virtual Isotropic Material Concept Combined with the Average Strain Energy Density Criterion, Polymers, 13, 1057, 10.3390/polym13071057 Torabi, 2012, Estimation of tensile load-bearing capacity of ductile metallic materials weakened by a V-notch: The equivalent material concept, Mater. Sci. Eng., A, 536, 249, 10.1016/j.msea.2012.01.007 Torabi, 2013, Ultimate bending strength evaluation of U-notched ductile steel samples under large-scale yielding conditions, Int. J. Fract., 180, 261, 10.1007/s10704-013-9804-9 Torabi, 2015, Mixed-mode ductile failure analysis of V-notched Al 7075–T6 thin sheets, Eng. Fract. Mech., 150, 70, 10.1016/j.engfracmech.2015.10.037 Torabi, 2016, Elastic-plastic fracture analysis of notched Al 7075–T6 plates by means of the local energy combined with the equivalent material concept, Физичecкaя мeзoмexaникa, 19 Torabi, 2016, Investigation of ductile rupture in U-notched Al 6061–T6 plates under mixed mode loading, Fatigue Fract. Eng. Mater. Struct., 39, 551, 10.1111/ffe.12376 Torabi, 2017, Tensile failure in blunt V-notched ductile members: A new formulation of the Equivalent Material Concept, Eng. Fract. Mech., 184, 1, 10.1016/j.engfracmech.2017.08.013 Gómez, 2018, Application of the equivalent material concept to fracture of U-notched solids under small scale yielding, Procedia Struct. Integrity, 13, 267, 10.1016/j.prostr.2018.12.045 Torabi, 2019, Notch ductile failure with significant strain-hardening: The modified equivalent material concept, Fatigue Fract. Eng. Mater. Struct., 42, 439, 10.1111/ffe.12921 Negru, 2015, Application of TCD for brittle fracture of notched PUR materials, Theor. Appl. Fract. Mech., 80, 87, 10.1016/j.tafmec.2015.05.005 Berto, 2017, On the fracture behavior of polyurethane notched components, Procedia Struct. Integrity, 3, 144, 10.1016/j.prostr.2017.04.025 Aliha, 2019, Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading, Theor. Appl. Fract. Mech., 101, 152, 10.1016/j.tafmec.2019.02.016 Marsavina, 2017, An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling, Theor. Appl. Fract. Mech., 91, 148, 10.1016/j.tafmec.2017.06.008 Negru, 2015, Assessment of brittle fracture for PUR materials using local strain energy density and theory of critical distances, Theor. Appl. Fract. Mech., 79, 62, 10.1016/j.tafmec.2015.07.011 Linul, 2020, Mode I and II fracture toughness investigation of Laser-Sintered Polyamide, Theor. Appl. Fract. Mech., 106, 10.1016/j.tafmec.2020.102497 JIS Z 2201, Test pieces for tensile test for metallic materials, in: Japanese Stand. Assoc., 1998. ISO 6892, Metallic materials — Tensile testing, in, 1984. Fakoor, 2017, The influence of fiber-crack angle on the crack tip parameters in orthotropic materials, Proc. Instit. Mech. Eng., Part C: J. Mech. Eng. Sci., 231, 418, 10.1177/0954406215617195 Mindess, 1986, Crack propagation in notched wood specimens with different grain orientations, Wood Sci. Technol., 20, 145, 10.1007/BF00351026 Torabi, 2018, Fracture analysis of dissimilar Al-Al friction stir welded joints under tensile/shear loading, Fatigue Fract. Eng. Mater. Struct., 41, 2040, 10.1111/ffe.12841 M.L. Williams, On the stress distribution at the base of a stationary crack, 1957. Filippi, 2002, Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates, Int. J. Solids Struct., 39, 4543, 10.1016/S0020-7683(02)00342-6 Ayatollahi, 2009, A criterion for brittle fracture in U-notched components under mixed mode loading, Eng. Fract. Mech., 76, 1883, 10.1016/j.engfracmech.2009.04.008 Seweryn, 1994, Brittle fracture criterion for structures with sharp notches, Eng. Fract. Mech., 47, 673, 10.1016/0013-7944(94)90158-9 Torabi, 2014, Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading, Int. J. Solids Struct., 51, 1287, 10.1016/j.ijsolstr.2013.12.024 Glinka, 1985, Calculation of inelastic notch-tip strain-stress histories under cyclic loading, Eng. Fract. Mech., 22, 839, 10.1016/0013-7944(85)90112-2 Glinka, 1987, Universal features of elastic notch-tip stress fields, Int. J. Fatigue, 9, 143, 10.1016/0142-1123(87)90069-7 Lazzarin, 2006, A generalized stress intensity factor to be applied to rounded V-shaped notches, Int. J. Solids Struct., 43, 2461, 10.1016/j.ijsolstr.2005.03.007