Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update

Rokaya, 2018, Polymeric materials and films in dentistry: An overview, J. Adv. Res., 14, 25, 10.1016/j.jare.2018.05.001

Xu, 2017, Advances in polymeric materials for dental applications, Polym. Chem., 8, 807, 10.1039/C6PY01957A

Imazato, 2014, Therapeutic polymers for dental adhesives: Loading resins with bio-active components, Dent. Mater., 30, 97, 10.1016/j.dental.2013.06.003

Najeeb, 2016, Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics, J. Prosthodont. Res., 60, 12, 10.1016/j.jpor.2015.10.001

Kwon, 2013, Development of ultra-hydrophilic and non-cytotoxic dental vinyl polysiloxane impression materials using a non-thermal atmospheric-pressure plasma jet, J. Phys. D, 46, 195201, 10.1088/0022-3727/46/19/195201

Ohkawa, 2009, Synthesis of collagen-like sequential polypeptides containing O-phospho-L-hydroxyproline and preparation of electrospun composite fibers for possible dental application, Macromol. Biosci., 9, 79, 10.1002/mabi.200800122

Deb, 1998, Polymers in dentistry, J. Eng. Med., 212, 453, 10.1243/0954411981534213

Alqurashi, H., Khurshid, Z., Azeem Ul Yaqin, S., Rashid Habib, S., Rokaya, D., and Sohail Zafar, M. (2020). Polyetherketoneketone (PEKK): An emerging biomaterial for oral implants and dental prostheses. J. Adv. Res., in press.

Hassan, M., Asghar, M., Din, S.U., and Zafar, M.S. (2019). Chapter 8. Thermoset Polymethacrylate-Based Materials for Dental Applications, Elsevier.

Khurshid, Z., Najeeb, S., Zafar, M.S., and Sefat, F. (2019). Acrylic denture base materials. 5 Advanced Dental Biomaterials, Woodhead Publishing.

Sakaguchi, R.L., and Powers, J.M. (2012). Craig’s Restorative Dental Materials, Elsevier/Mosby.

Zafar, 2013, Nano-mechanical evaluation of dental hard tissues using indentation technique, World Appl. Sci. J., 28, 1393

Chang, 2019, Effects of pontic span and fiber reinforcement on fracture strength of multi-unit provisional fixed partial dentures, J. Dent. Sci., 14, 309, 10.1016/j.jds.2018.11.008

2020, The impact of polymerization technique and glass-fiber reinforcement on the flexural properties of denture base resin material, Eur. J. Dent., 14, 92, 10.1055/s-0040-1701922

Castano, 2012, Fiber-reinforced nanopigmented poly (methyl methacrylate) as improved denture base, J. Appl. Polym. Sci., 126, 289, 10.1002/app.36913

Hamouda, 2014, Addition of glass fibers and titanium dioxide nanoparticles to the acrylic resin denture base material: Comparative study with the conventional and high impact types, Oral Health Dent. Manag., 13, 107

Ismaeel, 2015, The effect of the addition of silanated poly propylene fiber to polymethylmethacrylate denture base material on some of its mechanical properties, J. Baghdad Coll. Dent., 27, 40, 10.12816/0015263

Chen, 2001, Reinforcement of acrylic denture base resin by incorporation of various fibers, J. Biomed. Mater., 58, 203, 10.1002/1097-4636(2001)58:2<203::AID-JBM1008>3.0.CO;2-G

Vallittu, 1994, Acrylic resin-fiber composite—Part I: The effect of fiber concentration on fracture resistance, J. Prosthet. Dent., 71, 607, 10.1016/0022-3913(94)90446-4

Manley, 1979, Denture bases reinforced with carbon fibres, Br. Dent. J., 146, 25, 10.1038/sj.bdj.4804188

Yu, 2012, Reinforcing effects of different fibers on denture base resin based on the fiber type, concentration, and combination, Dent. Mater. J., 31, 1039, 10.4012/dmj.2012-020

Ladizesky, 1993, Acrylic resin reinforced with chopped high performance polyethylene fiber-properties and denture construction, Dent. Mater., 9, 128, 10.1016/0109-5641(93)90089-9

Ghafari, 2014, Does addition of silver nanoparticles to denture base resin increase its thermal conductivity?, J. Dent. Sch., 32, 144

Ghaffari, 2014, Effect of nanosilver on thermal and mechanical properties of acrylic base complete dentures, J. Dent. (Tehran), 11, 495

Jasim, 2014, The effect of silanized alumina nano-fillers addition on some physical and mechanical properties of heat cured polymethyl methacrylate denture base material, J. Baghdad Coll. Dent., 26, 18, 10.12816/0015190

Chaijareenont, 2012, Effect of different amounts of 3-methacryloxypropyltrimethoxysilane on the flexural properties and wear resistance of alumina reinforced PMMA, Dent. Mater. J., 31, 623, 10.4012/dmj.2012-056

Tham, 2010, Simulated body fluid and water absorption effects on poly (methyl methacrylate)/hydroxyapatite denture base composites, Express Polym. Lett., 4, 517, 10.3144/expresspolymlett.2010.66

Aldabib, 2020, Effect of hydroxyapatite filler concentration on mechanical properties of poly (methyl methacrylate) denture base, SN Appl. Sci., 2, 1, 10.1007/s42452-020-2546-1

Lemos, 2020, Influence of addition of zirconia on PMMA: A systematic review, Mater. Sci. Eng. C, 106, 110292, 10.1016/j.msec.2019.110292

Zidan, S., Silikas, N., Haider, J., Alhotan, A., Jahantigh, J., and Yates, J. (2020). Evaluation of equivalent flexural strength for complete removable dentures made of zirconia-impregnated PMMA nanocomposites. Materials, 13.

Gad, 2016, Influence of incorporation of ZrO2 nanoparticles on the repair strength of polymethyl methacrylate denture bases, Int. J. Nanomed., 11, 5633, 10.2147/IJN.S120054

Salih, 2015, Investigation of fatigue and compression strength for the PMMA reinforced by different system for denture applications, Int. J. Biomed. Mater. Res., 3, 5

Gad, 2020, Effect of SiO2 nanoparticles addition on the flexural strength of repaired acrylic denture base, Eur. J. Dent., 14, 019, 10.1055/s-0039-1701076

Safi, 2014, Evaluation the effect of nano-fillers (TiO2, Al2O3, SiO2) addition on glass transition temperature, E-Moudulus and coefficient of thermal expansion of acrylic denture base material, J. Baghdad Coll. Dent., 26, 37, 10.12816/0015162

Balos, S., Puskar, T., Potran, M., Milekic, B., Djurovic Koprivica, D., Laban Terzija, J., and Gusic, I. (2020). Modulus, strength and cytotoxicity of PMMA-silica nanocomposites. Coatings, 10.

Balos, 2014, Poly (methyl-methacrylate) nanocomposites with low silica addition, J. Prosthet. Dent., 111, 327, 10.1016/j.prosdent.2013.06.021

Alamgir, 2019, Development of PMMA/TiO2 nanocomposites as excellent dental materials, J. Mech. Sci. Technol., 33, 4755, 10.1007/s12206-019-0916-7

Wang, 2014, Characterization of multiwalled carbon nanotube-polymethyl methacrylate composite resins as denture base materials, J. Prosthet. Dent., 111, 318, 10.1016/j.prosdent.2013.07.017

Qasim, 2012, An investigation into the impact and flexural strength of light cure denture resin reinforced with carbon nanotubes, World Appl. Sci. J., 18, 808

Mahmood, 2015, The effect of incorporating carbon nanotubes on impact, transverse strength, hardness, and roughness to high impact denture base material, J. Baghdad Coll. Dent., 27, 96, 10.12816/0015271

Turagam, 2013, Effect of micro-additions of carbon nanotubes to polymethylmethacrylate on reduction in polymerization shrinkage, J. Prosthodont. Implant. Esthet. Reconstr. Dent., 22, 105

Wang, R., Kayacan, R., and Küçükeşmen, C. (2016). Nanotubes/polymethyl methacrylate composite resins as denture base materials. Carbon Nanomaterials for Biomedical Applications, Springer.

Andreopoulos, 1987, Rubber-modified polymer composites, J. Mater. Sci., 22, 3417, 10.1007/BF01161214

Redtenbacher, 1843, Ueber die zerlegungsprodukte des glyceryloxydes durch trockene destillation, Justus Liebigs Ann. Chem., 47, 113, 10.1002/jlac.18430470202

Rueggeberg, 2002, From vulcanite to vinyl, a history of resins in restorative dentistry, J. Prosthet. Dent., 87, 364, 10.1067/mpr.2002.123400

Neher, 1936, Acrylic resins, Ind. Eng. Chem., 28, 267, 10.1021/ie50315a002

Peyton, 1975, History of resins in dentistry, Dent. Clin. North Am., 19, 211, 10.1016/S0011-8532(22)01065-5

DiMaio, 2002, The science of bone cement: A historical review, Orthopedics, 25, 1399, 10.3928/0147-7447-20021201-21

Kraft, 1977, Polymethylmethacrylate—A review, J. Foot Surg., 16, 66

Frazer, 2005, PMMA: An essential material in medicine and dentistry, J. Long. Term. Eff. Med., 15, 629, 10.1615/JLongTermEffMedImplants.v15.i6.60

Zidan, S., Silikas, N., Alhotan, A., Haider, J., and Yates, J. (2019). Investigating the mechanical properties of ZrO2-impregnated PMMA nanocomposite for denture-based applications. Materials, 12.

Chen, S., Yang, J., Jia, Y., Lu, B., and Ren, L. (2019). TiO2 and PEEK reinforced 3D printing PMMA composite resin for dental denture base applications. Nanomaterials, 9.

Shakeri, 2019, PMMA/double-modified organoclay nanocomposites as fillers for denture base materials with improved mechanical properties, J. Mech. Behav. Biomed. Mater., 90, 11, 10.1016/j.jmbbm.2018.09.033

Najeeb, 2016, Dental applications of nanodiamonds, Sci. Adv. Mater., 8, 2064, 10.1166/sam.2016.2993

Johnson, 1959, The history of prosthetic dentistry, J. Prosthet. Dent., 9, 841, 10.1016/0022-3913(59)90049-6

Gautam, 2012, Biocompatibility of polymethylmethacrylate resins used in dentistry, J. Biomed. Mater. Res. Part B, 100, 1444, 10.1002/jbm.b.32673

Khindria, 2009, Evolution of denture base materials, J. Indian Prosthodont. Soc., 9, 64, 10.4103/0972-4052.55246

Kedjarune, 1999, Release of methyl methacrylate from heat-curved and autopolymerized resins: Cytotoxicity testing related to residual monomer, Aust. Dent. J., 44, 25, 10.1111/j.1834-7819.1999.tb00532.x

Lang, 1974, The use of gold in construction of mandibular denture bases, J. Prosthet. Dent., 32, 398, 10.1016/0022-3913(74)90348-5

Murray, 1993, The evolution of the complete denture base. Theories of complete denture retention—A review. Part 1, Aust. Dent. J., 38, 216, 10.1111/j.1834-7819.1993.tb03067.x

Komal, 2011, 19th century denture base materials revisited, Off. Publ. Am. Acad. Hist. Dent., 59, 1

Young, B.C. (2010). A Comparison of Polymeric Denture Base Materials. [Ph.D. Thesis, University of Glasgow].

Sasaki, 2016, Effect of long-term water immersion or thermal shock on mechanical properties of high-impact acrylic denture base resins, Dent. Mater. J., 35, 204, 10.4012/dmj.2015-291

Takahashi, 2013, Flexural properties of denture base resins subjected to long-term water immersion, Acta Odontol. Scand., 71, 716, 10.3109/00016357.2012.715196

Narva, 2005, The static strength and modulus of fiber reinforced denture base polymer, Dent. Mater., 21, 421, 10.1016/j.dental.2004.07.007

Nejatian, T., Nathwani, N., Taylor, L., and Sefat, F. (2020). Denture base composites: Effect of surface modified nano-and micro-particulates on mechanical properties of polymethyl methacrylate. Materials, 13.

Gad, 2020, Influence of addition of different nanoparticles on the surface properties of poly (methylmethacrylate) denture base material, J. Prosthodont., 29, 422, 10.1111/jopr.13168

Gad, M.M., Rahoma, A., Abulsaud, R., Al-Thobity, A.M., Akhtar, S., Helal, M.A., and AL-Harbi, F.A. (2020). Impact of different surface treatments and repair material reinforcement on the flexural strength of repaired PMMA denture base material. Dent. Mater. J., 2018–2436.

Gad, 2019, Effect of nanodiamond addition on flexural strength, impact strength, and surface roughness of PMMA denture base, J. Prosthodont., 28, e417

Elshereksi, N., Muchtar, A., and Azhari, C. (2020). Effects of nanobarium titanate on physical and mechanical properties of poly (methyl methacrylate) denture base nanocomposites. Polym. Polym. Compos.

Raszewski, 2020, Influence of silanized silica and silanized feldspar addition on the mechanical behavior of polymethyl methacrylate resin denture teeth, J. Prosthet. Dent., 123, 647.e1, 10.1016/j.prosdent.2019.12.007

Abushowmi, 2020, Comparative effect of glass fiber and nano-filler addition on denture repair strength, J. Prosthodont., 29, 261, 10.1111/jopr.13124

Alqahtani, M. (2020). Effect of hexagonal boron nitride nanopowder reinforcement and mixing methods on physical and mechanical properties of self-cured PMMA for dental applications. Materials, 13.

Helal, 2020, Effect of SiO2 and Al2O3 nanoparticles on wear resistance of PMMA acrylic denture teeth, Braz. Dent. Sci., 23, 12, 10.14295/bds.2020.v23i3.1999

Jagger, 1999, The reinforcement of dentures, J. Oral Rehabil., 26, 185, 10.1046/j.1365-2842.1999.00375.x

Alhareb, 2015, Mechanical properties of PMMA denture base reinforced by nitrile rubber particles with Al2O3/YSZ fillers, Procedia Manuf., 2, 301, 10.1016/j.promfg.2015.07.053

Ali, 2015, A Review of the properties and applications of poly (methyl methacrylate) (PMMA), Polym. Rev., 55, 678, 10.1080/15583724.2015.1031377

Anusavice, K.J., Shen, C., and Rawls, H.R. (2012). Phillips’ Science of Dental Materials, Elsevier Health Sciences.

Swaney, 1953, American dental association specification No. 12 for denture base resin: Second revision, J. Am. Dent. Assoc., 46, 54, 10.14219/jada.archive.1953.0007

Council on dental materials and devices (1975). Revised american dental association specification no. 12 for denture base polymers. J. Am. Dent. Assoc., 90, 451–458.

ISO (2020, October 05). ISO 20795–1:2013 Dentistry-Base Polymers-Part 1: Denture Base Polymers. Available online: https://www.iso.org/standard/62277.html.

Alla, 2015, Conventional and contemporary polymers for the fabrication of denture prosthesis: Part I–overview, composition and properties, Int. J. Appl. Dent. Sci., 1, 82

Harrison, 1992, Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers, J. Dent., 20, 370, 10.1016/0300-5712(92)90031-7

Bartoloni, 2000, Degree of conversion in denture base materials for varied polymerization techniques 1, J. Oral Rehabil., 27, 488, 10.1046/j.1365-2842.2000.00536.x

Jerolimov, 1989, Rapid curing of acrylic denture-base materials, Dent. Mater., 5, 18, 10.1016/0109-5641(89)90086-9

Memon, 2001, Some mechanical properties of a highly cross-linked, microwave-polymerized, injection-molded denture base polymer, Int. J. Prosthodont., 14, 214

Tandon, 2010, Denture base materials: From past to future, Indian J. Dent. Sci., 2, 33

McCabe, J.F., and Walls, A. (2013). Applied Dental Materials, John Wiley and Sons.

2012, The future of dental devices is digital, Dent. Mater., 28, 3, 10.1016/j.dental.2011.10.014

Alqahtani, 2020, Mechanical properties enhancement of self-cured PMMA reinforced with zirconia and boron nitride nanopowders for high-performance dental materials, J. Mech. Behav. Biomed. Mater., 110, 103937, 10.1016/j.jmbbm.2020.103937

Shintani, 1985, Analysis of camphorquinone in visible light-cured composite resins, Dent. Mater., 1, 124, 10.1016/S0109-5641(85)80002-6

Park, 1999, Development of a new photoinitiation system for dental light-cure composite resins, Dent. Mater., 15, 120, 10.1016/S0109-5641(99)00021-4

Ogle, 1986, A new visible light-cured resin system applied to removable prosthodontics, J. Prosthet. Dent., 56, 497, 10.1016/0022-3913(86)90397-5

Takamata, 1989, Resin denture bases: Review of accuracy and methods of polymerization, Int. J. Prosthodont., 2, 555

Skinner, 1951, Acrylic denture base materials: Their physical properties and manipulation, J. Prosthet. Dent., 1, 161, 10.1016/0022-3913(51)90091-1

Nogueira, 1999, Comparison of accuracy between compression-and injection-molded complete dentures, J. Prosthet. Dent., 82, 291, 10.1016/S0022-3913(99)70083-1

Gharechahi, 2014, Dimensional changes of acrylic resin denture bases: Conventional versus injection-molding technique, J. Dent. (Tehran), 11, 398

Zafar, 2014, Nanoindentation and surface roughness profilometry of poly methyl methacrylate denture base materials, Technol. Health Care, 22, 573, 10.3233/THC-140832

Vallittu, 1995, Residual monomer content and its release into water from denture base materials, Dent. Mater., 11, 338, 10.1016/0109-5641(95)80031-X

Elwakiel, 2020, Synthesis, Characterization of Ag and Sn2 complexes and their applications to improve the biological and mechanical properties of denture base materials, J. Mol. Struct., 1219, 128521, 10.1016/j.molstruc.2020.128521

Raszewski, 2020, Influence of polymerization method on the cytotoxicity of three different denture base acrylic resins polymerized in different methods, Saudi J. Biol. Sci., 27, 2612, 10.1016/j.sjbs.2020.05.039

Zheng, 2011, Synthesis and biological evaluation of PMMA/MMT nanocomposite as denture base material, J. Mater. Sci. Mater. Med., 22, 1063, 10.1007/s10856-011-4269-8

Soygun, 2013, Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials, J. Adv. Prosthodont., 5, 153, 10.4047/jap.2013.5.2.153

Asar, 2013, Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins, J. Adv. Prosthodont., 5, 241, 10.4047/jap.2013.5.3.241

Polychronakis, 2020, The effect of different cooling procedures on mechanical properties of denture base materials measured by instrumented indentation testing, J. Prosthodont. Res., 64, 326, 10.1016/j.jpor.2019.09.005

Rickman, 2012, Contemporary denture base resins: Part 1, Dent. Update, 39, 25, 10.12968/denu.2012.39.1.25

Mark, J.E. (2007). Physical Properties of Polymers Handbook, 1076, Springer.

Kutz, M. (2002). Handbook of Materials Selection, John Wiley and Sons.

Braun, 2003, Surface texture and some properties of acrylic resins submitted to chemical polishing, J. Oral Rehabil., 30, 91, 10.1046/j.1365-2842.2003.00997.x

Jorge, 2003, Cytotoxicity of denture base acrylic resins: A literature review, J. Prosthet. Dent., 90, 190, 10.1016/S0022-3913(03)00349-4

Lung, 2005, Minimization of the inevitable residual monomer in denture base acrylic, Dent. Mater., 21, 1119, 10.1016/j.dental.2005.03.003

Thaitammayanon, 2018, Ultrasonic treatment reduced residual monomer in methyl methacrylate-based orthodontic base-plate materials, Dent. Oral. Craniofac. Res., 4, 1

Vallittu, 1998, Effect of polymerization temperature and time on the residual monomer content of denture base polymers, Eur. J. Oral Sci., 106, 588, 10.1046/j.0909-8836.1998.eos106109.x

Bek, 1995, The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption, J. Dent., 23, 313, 10.1016/0300-5712(94)00002-W

Leggat, 2003, Toxicity of methyl methacrylate in dentistry, Int. Dent. J., 53, 126, 10.1111/j.1875-595X.2003.tb00736.x

Latief, A. (2012). Sorption and Solubility of a Denture Base Acrylic. [Master’s Thesis, Cape Peninsula University of Technology].

Miettinen, 1997, Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin, J. Prosthet. Dent., 77, 531, 10.1016/S0022-3913(97)70147-1

Bayraktar, 2006, Influence of polymerization method, curing process, and length of time of storage in water on the residual methyl methacrylate content in dental acrylic resins, J. Biomed. Mater., 76, 340, 10.1002/jbm.b.30377

Tuna, 2008, The evaluation of water sorption/solubility on various acrylic resins, Eur. J. Dent., 2, 191, 10.1055/s-0039-1697377

Saini, 2016, Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions, Indian J. Dent. Res., 27, 288, 10.4103/0970-9290.186234

Van Noort, R., and Barbour, M.E. (2013). Introduction to Dental Materials 4, Elsevier Health Sciences.

Sagsoz, 2014, Color changes of polyamid and polymetyhl methacrylate denture base materials, Open J. Stomatol., 4, 489, 10.4236/ojst.2014.410066

Alp, 2019, Optical properties and surface roughness of prepolymerized poly (methyl methacrylate) denture base materials, J. Prosthet. Dent., 121, 347, 10.1016/j.prosdent.2018.03.001

Scotti, 1997, The in vitro color stability of acrylic resins for provisional restorations, Int. J. Prosthodont., 10, 164

Ganzarolli, 2007, A Internal adaptation and some physical properties of methacrylate-based denture base resins polymerized by different techniques, J. Biomed. Mater., 82, 169, 10.1002/jbm.b.30718

Safarabadi, 2014, An experimental investigation of HA/AL2O3 nanoparticles on mechanical properties of restoration materials, Eng. Solid Mech., 2, 173, 10.5267/j.esm.2014.4.006

Chandler, 1971, Development of a radiopaque denture base material, J. Biomed. Mater. Res., 5, 253, 10.1002/jbm.820050312

McCabe, 1976, A radio-opaque denture material, J. Dent., 4, 211, 10.1016/0300-5712(76)90050-6

Aldabib, 2020, Reinforcement of poly (methyl methacrylate) denture base material, Dent. Med. J., 2, 46

Lang, 2000, The effect of triphenylbismuth on the radiopacity and performance properties of compression-and injection-molded denture resins, J. Prosthodont., 9, 23, 10.1111/j.1532-849X.2000.00023.x

Alhareb, 2016, Influence of Al2O3/Y-TSZ mixture as filler loading on the radiopacity of PMMA denture base composites, Procedia Chem., 19, 646, 10.1016/j.proche.2016.03.065

Mattie, 1994, Development of a radiopaque, autopolymerizing dental acrylic resin, J. Prosthodont., 3, 213, 10.1111/j.1532-849X.1994.tb00158.x

Bloodworth, 1992, Dental acrylic resin radiopacity: Literature review and survey of practitioners’ attitudes, J. Prosthet. Dent., 67, 121, 10.1016/0022-3913(92)90061-E

Bangera, 2020, Effect of titanium dioxide nanoparticle reinforcement on flexural strength of denture base resin: A systematic review and meta-analysis, Jpn. Dent. Sci. Rev., 56, 68, 10.1016/j.jdsr.2020.01.001

AlQahtani, M., and Haralur, S.B. (2020). Influence of different repair acrylic resin and thermocycling on the flexural strength of denture base resin. Medicina, 56.

Kawaguchi, 2020, Effect of cellulose nanofiber content on flexural properties of a model, thermoplastic, injection-molded, polymethyl methacrylate denture base material, J. Mech. Behav. Biomed. Mater., 102, 103513, 10.1016/j.jmbbm.2019.103513

Hannon, 2020, Studying the impact strength of layered denture base resin, Iraqi J. Phys., 18, 25, 10.30723/ijp.v18i44.495

Vallittu, 1995, Impact strength of denture polymethyl methacrylate reinforced with continuous glass fibers or metal wire, Acta Odontol. Scand., 53, 392, 10.3109/00016359509006007

Mowade, 2012, Effect of fiber reinforcement on impact strength of heat polymerized polymethyl methacrylate denture base resin: In vitro study and SEM analysis, J. Adv. Prosthodont., 4, 30, 10.4047/jap.2012.4.1.30

Faot, 2006, Impact strength and fracture morphology of denture acrylic resins, J. Prosthet. Dent., 96, 367, 10.1016/j.prosdent.2006.08.001

Behroozibakhsh, 2018, Effects of incorporation of 2.5 and 5 wt% TiO2 nanotubes on fracture toughness, flexural strength, and microhardness of denture base poly methyl methacrylate (PMMA), J. Adv. Prosthodont., 10, 113, 10.4047/jap.2018.10.2.113

Kenawy, 2019, Synthesis of zirconia, organic and hybrid nanofibers for reinforcement of polymethyl methacrylate denture base: Evaluation of flexural strength and modulus, fracture toughness and impact strength, Tanta Dent. J., 16, 12, 10.4103/tdj.tdj_23_18

Mousavi, 2020, Effects of biocompatible nanofillers on mixed-mode I and II fracture toughness of PMMA base dentures, J. Mech. Behav. Biomed. Mater., 103, 103566, 10.1016/j.jmbbm.2019.103566

Ali, 2008, Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems, J. Prosthodont., 17, 545, 10.1111/j.1532-849X.2008.00357.x

Vojdani, 2012, Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat-polymerized acrylic resin, J. Dent. Sci., 7, 238, 10.1016/j.jds.2012.05.008

Barbosa, 2007, Flexural strength of acrylic resins polymerized by different cycles, J. Appl. Oral Sci., 15, 424, 10.1590/S1678-77572007000500010

Zappini, 2003, Comparison of fracture tests of denture base materials, J. Prosthet. Dent., 90, 578, 10.1016/j.prosdent.2003.09.008

Stafford, 1980, Fracture toughness of denture base acrylics, J. Biomed. Mater. Res., 14, 359, 10.1002/jbm.820140403

Robinson, 1993, Impact strength of acrylic resin denture base materials with surface defects, Dent. Mater., 9, 355, 10.1016/0109-5641(93)90056-V

Zafar, 2018, Wear behavior of various dental restorative materials, Mater. Technol., 33, 25

Zafar, 2014, Effects of wear on hardness and stiffness of restorative dental materials, Life Sci. J., 11, 11

Zafar, M.S., Amin, F., Fareed, M.A., Ghabbani, H., Riaz, S., Khurshid, Z., and Kumar, N. (2020). Biomimetic aspects of restorative dentistry biomaterials. Biomimetics, 5.

Gupta, A., and Kamra, M. (2011). An evaluation of the effect of water sorption on dimensional stability of the acrylic resin denture bases. Int. J. Contemp. Dent., 2.

Arima, 1996, The effects of cross-linking agents on the water sorption and solubility characteristics of denture base resin, J. Oral Rehabil., 23, 476, 10.1111/j.1365-2842.1996.tb00882.x

(2002). Dental Materials and their Selection, Quintessence.

Atwood, 1979, Bone loss of edentulous alveolar ridges, J. Periodontol., 50, 11, 10.1902/jop.1979.50.4s.11

Alsaggaf, A., and Fenlon, M.R. (2020). A case control study to investigate the effects of denture wear on residual alveolar ridge resorption in edentulous patients. J. Dent., 103373.

Atsu, 2013, Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material, J. Appl. Oral Sci., 21, 300, 10.1590/1678-775720130066

Raszewski, 2016, Color change of soft silicone relining materials after storage in artificial saliva, J. Prosthet. Dent., 115, 377, 10.1016/j.prosdent.2015.08.022

Cavalcanti, 2014, The effect of poly (methyl methacrylate) surface treatments on the adhesion of silicone-based resilient denture liners, J. Prosthet. Dent., 112, 1539, 10.1016/j.prosdent.2013.07.031

Bail, 2014, Surface roughness of acrylic and silicone-based soft liners: In vivo study in a rat model, J. Prosthodont., 23, 146, 10.1111/jopr.12074

Habib, 2013, Replacing existing dentures by copy-denture technique for geriatric patients: A case report, J. Pak. Dent. Assoc., 22, 265

Patil, 2006, Bonding acrylic teeth to acrylic resin denture bases: A review, Gerodontology, 23, 131, 10.1111/j.1741-2358.2006.00129.x

Huggett, 1982, Strength of the acrylic denture base tooth bond, Br. Dent. J., 153, 187, 10.1038/sj.bdj.4804883

Darbar, 1994, Denture fracture—A survey, Br. Dent. J., 176, 342, 10.1038/sj.bdj.4808449

Chung, 2008, Effect of pre-processing surface treatments of acrylic teeth on bonding to the denture base, J. Oral Rehabil., 35, 268, 10.1111/j.1365-2842.2007.01779.x

Saavedra, 2007, Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling, Int. J. Prosthodont., 20, 199

Goldin, 2005, Marginal fit of leucite-glass pressable ceramic restorations and ceramic-pressed-to-metal restorations, J. Prosthet. Dent., 93, 143, 10.1016/j.prosdent.2004.10.023

Alabdulkader, 2018, Effect of cement application techniques on the adaptation and retention of provisional crowns, Technol. Health Care, 26, 945, 10.3233/THC-181351

Alt, 2011, Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations, Dent. Mater., 27, 339, 10.1016/j.dental.2010.11.012

Yilmaz, 2007, Fracture resistance of various temporary crown materials, J. Contemp. Dent. Pract., 8, 44, 10.5005/jcdp-8-1-44

Kwon, 2013, Thermal irritation of teeth during dental treatment procedures, Restor. Dent. Endod., 38, 105, 10.5395/rde.2013.38.3.105

Bahrani, 2012, Comparison of hardness and surface roughness of two denture bases polymerized by different methods, World J. Dent., 3, 171, 10.5005/jp-journals-10015-1151

Haas, 1975, A characterization of polymethylmethacrylate bone cement, J. Bone Jt. Surg., 57, 380, 10.2106/00004623-197557030-00017

Alkurt, 2014, Effect of repair resin type and surface treatment on the repair strength of heat-polymerized denture base resin, J. Prosthet. Dent., 111, 71, 10.1016/j.prosdent.2013.09.007

Raszewski, 2013, Mechanical properties of hot curing acrylic resin after reinforced with different kinds of fibers, Int. J. Biomed. Mat. Res., 1, 9

Polyzois, 1996, Acrylic resin denture repair with adhesive resin and metal wires: Effects on strength parameters, J. Prosthet. Dent., 75, 381, 10.1016/S0022-3913(96)90029-3

Polyzois, 2001, Fracture force, deflection at fracture, and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber, J. Prosthet. Dent., 86, 613, 10.1067/mpr.2001.120069

Habib, 2016, Preserving esthetics, occlusion and occlusal vertical dimension in a patient with fixed prostheses seeking dental implant treatment, Saudi Dent. J., 28, 203, 10.1016/j.sdentj.2016.05.003

Agarwal, 2008, A study to evaluate the transverse strength of repaired acrylic denture resins with conventional heat-cured, autopolymerizing and microwave-cured resins: An in vitro study, J. Indian Prosthodont. Soc., 8, 36, 10.4103/0972-4052.43252

Faot, 2009, Strength of denture base resins repaired with auto-and visible light-polymerized materials, J. Prosthodont. Dent., 18, 496, 10.1111/j.1532-849X.2009.00470.x

Murphy, 1986, Rigid cold curing resins for direct use in the oral cavity, Br. Dent. J., 160, 391, 10.1038/sj.bdj.4805870

Shifman, 1990, Clinical applications of visible light-cured resin in maxillofacial prosthetics. part I: Denture base and reline material, J. Prosthet. Dent., 64, 578, 10.1016/0022-3913(90)90132-V

Fellman, 1989, Visible light-cured denture resin used in making dentures with conventional teeth, J. Prosthet. Dent., 62, 356, 10.1016/0022-3913(89)90350-8

Polyzois, 1995, Repair strength of denture base resins using various methods, Eur. J. Prosthodont. Restor. Dent., 3, 183

Jacobsen, 1997, Lased and sandblasted denture base surface preparations affecting resilient liner bonding, J. Prosthet. Dent., 78, 153, 10.1016/S0022-3913(97)70119-7

Jagger, 2002, Some variables influencing the bond strength between PMMA and a silicone denture lining material, Int. J. Prosthodont., 15, 55

Vojdani, 2008, Effect of chemical surface treatments and repair material on transverse strength of repaired acrylic denture resin, Indian J. Dent. Res., 19, 2, 10.4103/0970-9290.38923

Vallittu, 1994, Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin, J. Prosthet. Dent., 72, 639, 10.1016/0022-3913(94)90297-6

Minami, 2004, In vitro evaluation of the influence of repairing condition of denture base resin on the bonding of autopolymerizing resins, J. Prosthet. Dent., 91, 164, 10.1016/j.prosdent.2003.10.023

Neppelenbroek, 2007, Factors affecting the strength of denture repairs, J. Prosthodont., 16, 302, 10.1111/j.1532-849X.2007.00191.x

Ahmed, 2020, Definitive maxillary obturator prosthesis: Timelines for fabrication and follow-up, Spec. Care Dent., 40, 315, 10.1111/scd.12471

Helm, 2020, Treatment outcomes of implant-supported maxillary obturator prostheses in patients with maxillary defects: A systematic review, Int. J. Prosthodont., 33, 429, 10.11607/ijp.6642

Urechescu, 2016, Experimental compression and traction tests on heat-cured pmma used in maxillary obturator prostheses, Mat. Plast, 53, 76

Urechescu, 2017, Thermoplastic materials used for fabrication of maxillary obturator prostheses, Mat. Plast, 54, 477, 10.37358/MP.17.3.4874

Metwaly, 2017, Evaluation of microbial adhesions and quality of life in maxillectomy patients rehabilitated with cobalt-chromium and thermoplastic obturators, Egypt. Dent. J., 63, 3639, 10.21608/edj.2017.76429

Koyama, 2020, A workflow for fabricating a hollow obturator by using 3D digital technologies, J. Prosthet. Dent., 123, 648, 10.1016/j.prosdent.2019.05.020

Jang, 2020, Fabrication of closed hollow obturator for hard palate defect patient undergone maxillectomy, J. Korean Acad. Prosthodont., 58, 30, 10.4047/jkap.2020.58.1.30

Sharma, 2020, Rehabilitation of patient with hemimaxillectomy defect using a closed hollow bulb obturator: A case report, J. Adv. Med. Dent. Sci. Res., 8, 107

Ramasamy, 2020, An innovative sectional silicone obturator in a patient with partial maxillectomy: A Case report, J. Indian. Prosthodont. Soc., 20, 115, 10.4103/jips.jips_171_19

Qoran, 2012, Using a silicone core to reduce the weight of maxillary obturator prosthesis, J. Dent. Sch., 30, 136

Bidra, 2013, Computer-aided technology for fabricating complete dentures: Systematic review of historical background, current status, and future perspectives, J. Prosthet. Dent., 109, 361, 10.1016/S0022-3913(13)60318-2

Alp, 2019, Comparison of Flexural Strength of Different CAD/CAM PMMA-Based Polymers, J. Prosthodont., 28, 491, 10.1111/jopr.12755

Tahboub, 2020, A comparison of the flexural and impact strengths and flexural modulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (PMMA), J. Prosthodont., 29, 341, 10.1111/jopr.12926

Arslan, 2018, Evaluation of flexural strength and surface properties of prepolymerized CAD/CAM PMMA-based polymers used for digital 3D complete dentures, Int. J. Comput. Dent., 21, 31

Tahboub, 2019, A comparison of the surface properties of CAD/CAM and conventional polymethylmethacrylate (PMMA), J. Prosthodont., 28, 452, 10.1111/jopr.13033

Murat, 2019, In vitro evaluation of adhesion of candida albicans on CAD/CAM PMMA-based polymers, J. Prosthodont., 28, 873, 10.1111/jopr.12942

Srinivasan, M., Gjengedal, H., Cattani-Lorente, M., Moussa, M., Durual, S., Schimmel, M., and Müller, F. (2018). CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. Dent. Mater. J., 2017–2207.

Choi, 2020, Bond Strength of denture teeth to heat-cured, CAD/CAM and 3D printed denture acrylics, J. Prosthodont., 29, 415, 10.1111/jopr.13125

Kalberer, 2019, CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness, J. Prosthet. Dent., 121, 637, 10.1016/j.prosdent.2018.09.001

Davda, 2017, An investigation into the trueness and precision of copy denture templates produced by rapid prototyping and conventional means, Eur. J. Prosthodont. Restor. Dent., 25, 186

Steinmassl, 2017, Do CAD/CAM dentures really release less monomer than conventional dentures?, Clin. Oral Investig., 21, 1697, 10.1007/s00784-016-1961-6

Quirynen, 1990, The influence of surface free energy and surface roughness on early plaque formation: An in vivo study in man, J. Clin. Periodontol., 17, 138, 10.1111/j.1600-051X.1990.tb01077.x

Quirynen, 1993, An in vivo study of the influence of the surface roughness of implants on the microbiology of supra-and subgingival plaque, J. Dent. Res., 72, 1304, 10.1177/00220345930720090801

Iqbal, 2016, Role of antifungal medicaments added to tissue conditioners: A systematic review, J. Prosthodont. Res., 60, 231, 10.1016/j.jpor.2016.03.006

Gendreau, 2011, Epidemiology and etiology of denture stomatitis, J. Prosthodont., 20, 251, 10.1111/j.1532-849X.2011.00698.x

Hoshi, 2011, Management of oral candidiasis in denture wearers, J. Prosthodont. Res., 55, 48, 10.1016/j.jpor.2010.03.004

Gasparoto, 2010, Candida albicans and denture stomatitis: Evaluation of its presence in the lesion, prosthesis, and blood, Int. J. Prosthodont., 23, 158

Amin, 2009, A new form of intraoral delivery of antifungal drugs for the treatment of denture-induced oral candidosis, Eur. J. Dent., 3, 257, 10.1055/s-0039-1697442

Huettig, 2016, First clinical experiences with CAD/CAM-fabricated PMMA-based fixed dental prostheses as long-term temporaries, Clin. Oral Investig., 20, 161, 10.1007/s00784-015-1475-7

Moshkelgosha, 2016, Comparison of wear resistance of hawley and vacuum formed retainers: An in-vitro study, J. Dent. Biomater., 3, 248

Casey, 2003, In vitro wear of various orthotic device materials, J. Prosthet. Dent., 90, 498, 10.1016/S0022-3913(03)00545-6

Rantala, 2003, Fatigue resistance of removable orthodontic appliance reinforced with glass fibre weave, J. Oral Rehabil., 30, 501, 10.1046/j.1365-2842.2003.01108.x

Faltermeier, 2007, Acrylic removable appliances: Comparative evaluation of different postpolymerization methods, Am. J. Orthod. Dentofac. Orthop., 131, 301.e16, 10.1016/j.ajodo.2006.07.019

Namura, 2020, Effects of composition on the hardness of orthodontic adhesives, J. Oral Sci., 62, 48, 10.2334/josnusd.19-0035

Habib, 2009, Comparison of patient’s satisfaction with replacement complete dentures fabricated by copy denture technique versus conventional technique, J. Pak. Dent. Assoc., 18, 9

Habib, 2017, Effect of margin designs on the marginal adaptation of zirconia copings, Acta Stomatol. Croat., 51, 179, 10.15644/asc51/3/1

Habib, 2019, Effect of cementation, cement type and vent holes on fit of zirconia copings, Saudi Dent. J., 31, 45, 10.1016/j.sdentj.2018.09.001

Zafar, 2014, Potential use of natural silk for bio-dental applications, J. Taibah Univ. Med. Sci., 9, 171

Tsuchiya, 1994, Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials, J. Prosthet. Dent., 71, 618, 10.1016/0022-3913(94)90448-0

Nandal, 2013, New era in denture base resins: A review, Dent. J. Adv. Stud., 1, 136, 10.1055/s-0038-1671969

Cierech, M., Osica, I., Kolenda, A., Wojnarowicz, J., Szmigiel, D., Łojkowski, W., Kurzydłowski, K., Ariga, K., and Mierzwińska-Nastalska, E. (2018). Mechanical and physicochemical properties of newly formed ZnO-PMMA nanocomposites for denture bases. Nanomaterials, 8.

Khan, 2015, An update on glass fiber dental restorative composites: A systematic review, Mater. Sci. Eng. C, 47, 26, 10.1016/j.msec.2014.11.015

Xu, 2003, Continuous-fiber preform reinforcement of dental resin composite restorations, Dent. Mater., 19, 523, 10.1016/S0109-5641(02)00100-8

Petersen, 2005, Discontinuous fiber-reinforced composites above critical length, J. Dent. Res., 84, 365, 10.1177/154405910508400414

Hyer, M.W., and White, S.R. (2009). Stress Analysis of Fiber-Reinforced Composite Materials, DEStech Publications, Inc.

Kreulen, 2008, Fiber-reinforced dental composites in beam testing, Dent. Mater., 24, 1435, 10.1016/j.dental.2008.06.006

Butterworth, 2003, Fibre-reinforced composites in restorative dentistry, Dent. Update, 30, 300, 10.12968/denu.2003.30.6.300

Garoushi, 2008, Depth of cure and surface microhardness of experimental short fiber-reinforced composite, Acta Odontol. Scand., 66, 38, 10.1080/00016350801918377

Topouzi, 2017, Reinforcement of a PMMA resin for interim fixed prostheses with silica nanoparticles, J. Mech. Behav. Biomed. Mater., 69, 213, 10.1016/j.jmbbm.2017.01.013

Ratanajanchai, M., Kanchanavasita, W., Suputtamongkol, K., Wonglamsam, A., Thamapipol, S., and Sae-Khow, O. (2020). Heat-cured poly(methyl methacrylate) resin incorporated with different food preservatives as an anti-microbial denture base material. J. Dent. Sci.

DeBoer, 1984, The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins, J. Prosthet. Dent., 51, 119, 10.1016/S0022-3913(84)80117-1

Alla, 2013, Influence of fiber reinforcement on the properties of denture base resins, J. Biomater. Nanobiotechnol., 4, 91, 10.4236/jbnb.2013.41012

Kanie, 2000, Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers, Dent. Mater., 16, 150, 10.1016/S0109-5641(99)00097-4

John, 2001, Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers, J. Prosthet. Dent., 86, 424, 10.1067/mpr.2001.118564

Ladizesky, 1994, Denture base reinforcement using woven polyethylene fiber, Int. J. Prosthodont., 7, 307

Ladizesky, 1992, Reinforcement of complete denture bases with continuous high performance polyethylene fibers, J. Prosthet. Dent., 68, 934, 10.1016/0022-3913(92)90554-N

Singh, 2016, Comparative evaluation of flexural strength of heat polymerised denture base resins after reinforcement with glass fibres and nylon fibres: An in vitro study, Adv. Hum. Biol., 6, 91, 10.4103/2321-8568.190315

Farina, 2012, Evaluation of vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement, Gerodontology, 29, 155, 10.1111/j.1741-2358.2010.00435.x

Vallittu, 1996, A review of fiber-reinforced denture base resins, J. Prosthodont., 5, 270, 10.1111/j.1532-849X.1996.tb00511.x

Chong, 2003, Strength and mode of failure of unidirectional and bidirectional glass fiber-reinforced composite materials, Int. J. Prosthodont., 16, 161

McDonough, 2001, Interfacial shear strengths of dental resin-glass fibers by the microbond test, Dent. Mater., 17, 492, 10.1016/S0109-5641(01)00008-2

Matinlinna, 2004, An introduction to silanes and their clinical applications in dentistry, Int. J. Prosthodont., 17, 155

Nejatian, 2006, Reinforcement of denture base resin, Advances in Science and Technology, Volume 49, 124, 10.4028/www.scientific.net/AST.49.124

Kul, 2016, Evaluation of thermal conductivity and flexural strength properties of poly (methyl methacrylate) denture base material reinforced with different fillers, J. Prosthet. Dent., 116, 803, 10.1016/j.prosdent.2016.03.006

Mansour, 2013, Effect of mica reinforcement on the flexural strength and microhardness of polymethyl methacrylate denture resin, J. Prosthodont., 22, 179, 10.1111/j.1532-849X.2012.00923.x

Casemiro, 2008, Antimicrobial and mechanical properties of acrylic resins with incorporated silver–zinc zeolite—Part I, Gerodontology, 25, 187, 10.1111/j.1741-2358.2007.00198.x

Flores, 2020, Antimicrobial poly (methyl methacrylate) with silver nanoparticles for dentistry: A systematic review, Appl. Sci., 10, 4007, 10.3390/app10114007

Kurt, 2017, The antifungal activity and cytotoxicity of silver containing denture base material, Niger. J. Clin. Pract., 20, 290, 10.4103/1119-3077.181362

Mendieta, 2012, Cytocompatible antifungal acrylic resin containing silver nanoparticles for dentures, Int. J. Nanomed., 7, 4777

Monteiro, 2012, Silver distribution and release from an antimicrobial denture base resin containing silver colloidal nanoparticles, J. Prosthodont., 21, 7, 10.1111/j.1532-849X.2011.00772.x

Sawada, 2014, Self-cleaning effects of acrylic resin containing fluoridated apatite-coated titanium dioxide, Gerodontology, 31, 68, 10.1111/ger.12052

Shibata, 2007, Antifungal effect of acrylic resin containing apatite-coated TiO2 photocatalyst, Dent. Mater. J., 26, 437, 10.4012/dmj.26.437

Harty, 2014, Surface characteristics and microbial adherence ability of modified polymethylmethacrylate by fluoridated glass fillers, Aust. Dent. J., 59, 482, 10.1111/adj.12218

Tsutsumi, 2016, Reduction of Candida biofilm adhesion by incorporation of prereacted glass ionomer filler in denture base resin, J. Dent., 44, 37, 10.1016/j.jdent.2015.11.010

Lee, 2016, Development of long-term antimicrobial poly (methyl methacrylate) by incorporating mesoporous silica nanocarriers, Dent. Mater., 32, 1564, 10.1016/j.dental.2016.09.001

Alwan, 2015, The effect of the addition of silanized nano titania fillers on some physical and mechanical properties of heat cured acrylic denture base materials, J. Baghdad Coll. Dent., 325, 1

Bacali, C., Badea, M., Moldovan, M., Sarosi, C., Nastase, V., Baldea, I., Chiorean, R.S., and Constantiniuc, M. (2019). The influence of graphene in improvement of physico-mechanical properties in PMMA denture base resins. Materials, 12.

Khurshid, Z., Najeeb, S., Zafar, M.S., and Sefat, F. (2019). Nanotechnology and nanomaterials in dentistry. Advanced Dental Biomaterials, Woodhead Publishing.

Yu, 2014, Reinforcement of denture base PMMA with ZrO2 nanotubes, J. Mech. Behav. Biomed. Mater., 32, 192, 10.1016/j.jmbbm.2014.01.003

Yadav, 2012, Effect of incorporation of silane-treated silver and aluminum microparticles on strength and thermal conductivity of PMMA, J. Prosthodont., 21, 546, 10.1111/j.1532-849X.2012.00873.x

Aljafery, 2015, Effect of addition ZrO2-Al2O3 nanoparticles mixture on some properties and denture base adaptation of heat cured acrylic resin denture base material, J. Baghdad Coll. Dent., 325, 1

Muklif, 2015, Studying the effect of addition a composite of silanized Nano-Al2O3 and plasma treated polypropylene fibers on some physical and mechanical properties of heat cured PMMA denture base material, J. Baghdad Coll. Dent., 325, 1

Khurshid, 2015, Advances in nanotechnology for restorative dentistry, Materials, 8, 717, 10.3390/ma8020717

Kalavathy, 2011, Effect of glass fiber and silane treated glass fiber reinforcement on impact strength of maxillary complete denture, Ann. Essen. Dent., 4, 7

Salman, 2015, The influence of adding of modified ZrO2-TiO2 nanoparticles on certain physical and mechanical properties of heat polymerized acrylic resin, J. Baghdad Coll. Dent., 325, 1

Abdulkareem, 2015, Evaluation the biological effect of adding aluminum oxide, silver nanoparticles into microwave treated PMMA powder, Int. J. Enhanc. Res. Sci. Technol. Eng., 4, 172

Bian, 2007, Influence of different amount of silane coupling agent on the flexural strength of PMMA/nanometer ZrO2 composites, Shanghai J. Stomatol., 16, 319

Asopa, 2015, A comparative evaluation of properties of zirconia reinforced high impact acrylic resin with that of high impact acrylic resin, Saudi J. Dent. Res., 6, 146, 10.1016/j.sjdr.2015.02.003

Ahmed, 2016, Effect of titanium dioxide nano particles incorporation on mechanical and physical properties on two different types of acrylic resin denture base, World J. Nano. Sci. Eng., 6, 111, 10.4236/wjnse.2016.63011

Elshereksi, 2009, Effect of filler incorporation on the fracture toughness properties of denture base poly (methyl methacrylate), J. Phys. Sci., 20, 1

Protopapa, 2011, Reinforcement of a PMMA resin for fixed interim prostheses with nanodiamonds, Dent. Mater. J., 30, 222, 10.4012/dmj.2010-135

Mangal, U., Kim, J., Seo, J., Kwon, J., and Choi, S. (2019). Novel poly (methyl methacrylate) containing nanodiamond to improve the mechanical properties and fungal resistance. Materials, 12.

Fouda, 2019, The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material-an in vitro study, J. Appl. Oral Sci., 27, 20180779, 10.1590/1678-7757-2018-0779

McNally, 2005, Polyethylene multiwalled carbon nanotube composites, Polymer, 46, 8222, 10.1016/j.polymer.2005.06.094

Collins, 2000, Nanotubes for electronics, Sci. Am., 283, 62, 10.1038/scientificamerican1200-62

Rodford, 1990, Further development and evaluation of high impact strength denture base materials, J. Dent., 18, 151, 10.1016/0300-5712(90)90056-K

Delfi, 2020, Functionalization of polymers and nanomaterials for biomedical applications: Antimicrobial platforms and drug carriers, Prosthesis, 2, 117, 10.3390/prosthesis2020012

Rouabhia, 2012, Diseases associated with oral polymicrobial biofilms, Open Mycol. J., 6, 27, 10.2174/1874437001206010027

Makvandi, 2020, Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry, Acta Biomater., 101, 69, 10.1016/j.actbio.2019.09.025

Sakuma, 2001, Antimicrobial effect of fluoride mouthrinse on mutans streptococci and lactobacilli in saliva, Pediatr. Dent., 23, 113

Gad, 2020, Flexural and surface properties of PMMA denture base material modified with thymoquinone as an antifungal agent, J. Prosthodont., 29, 243, 10.1111/jopr.12967

Makvandi, 2018, Antibacterial quaternary ammonium compounds in dental materials: A systematic review, Dent. Mater., 34, 851, 10.1016/j.dental.2018.03.014

Makvandi, 2016, Synthesis and characterization of photo-curable bis-quaternary ammonium dimethacrylate with antimicrobial activity for dental restoration materials, Eur. Polym. J., 74, 81, 10.1016/j.eurpolymj.2015.11.011

Makvandi, 2015, Photocurable, antimicrobial quaternary ammonium–modified nanosilica, J. Dent. Res., 94, 1401, 10.1177/0022034515599973

Fosse, 2006, In vitro antiseptic properties of an ammonium compound combined with denture base acrylic resin, Gerodontology, 23, 111, 10.1111/j.1741-2358.2006.00088.x

Fosse, 2004, In vitro new dialysis protocol to assay the antiseptic properties of a quaternary ammonium compound polymerized with denture acrylic resin, Lett. Appl. Microbiol., 39, 226, 10.1111/j.1472-765X.2004.01569.x

Mai, H., Kim, D., Hyun, D.C., Park, J.H., Lee, S.M., and Lee, D. (2019). A new antibacterial agent-releasing polydimethylsiloxane coating for polymethyl methacrylate dental restorations. J. Clin. Med., 8.

Lee, 2018, Nano-graphene oxide incorporated into PMMA resin to prevent microbial adhesion, Dent. Mater., 34, 63, 10.1016/j.dental.2018.01.019