Prospects of Pyrolysis Process and Models in Bioenergy Generation: a Comprehensive Review

Allyson S (2011) Biochar production for carbon sequestration, a major qualifying project submitted to the faculty of Worcester Polytechnic Institute in partial fulfilment of the requirements for the Degree of Bachelor of Science in Chemical Engineering. Worcester Polytechnic Institute (WPI) in Shanghai, China Antal MJ, Gronli M (2003) The art, science, and technology of charcoal production. Ind Eng Chem Res 42(8):1619–1640 Bahrami M (2009) Steady conduction heat transfer, ENSC 388 (F09). Available from: http://www.sfu.ca/~mbahrami/ENSC%20388/Notes/Staedy%20Conduction%20Heat%20Transfer.pdf. Accessed Nov 2019 Bajus M (2010) Pyrolysis of woody material. Petrol Coal 52(3):207–214 Basu P (2010) Biomass gasification and pyrolysis practical design. Academic Press, Kidlington, Oxford Basu P (2013) Biomass gasification, pyrolysis, and torrefaction: practical design and theory, 2nd edn. Academic Press, Burlington, p 548 Branca C, Di Blasi C (2003) Kinetics of the isothermal degradation of wood in the temperature range 528–708 K. J Anal Appl Pyrol 67:207–219 Chan WR, Kelbon M, Krieger BB (1985) Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle. Fuel 64:1505–1513. https://doi.org/10.1016/0016-2361(85)90364-3 Chan WP, Arvind A, Howard RB (2010) Experimental and theoretical investigation of heat and mass transfer processes during wood pyrolysis. Combust Flame 157(3):481–494 Crank J, Nicolson P (1996) A practical method for numerical evaluation of solutions of partial differential equations of the heat-conduction type. Adv Comput Math 6:207–226 Deal C, Brewer CE, Brown RC, Okure MAE, Amoding A(2011) Comparison of kiln-derived and gasifier-derived biochars as soil amendments in the humid tropics. Biomass Bioenergy 37:161–168. https://doi.org/10.1016/j.biombioe.2011.12.017 Demirbas A (2001) Biomass resource facilities and biomass conversion processing for fuels and chemicals. Energy Convers Manag 42(2001):1357–1378 Demirbas A (2004) Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues, (Master’s Degree Thesis). Selcuk University, Konya Demirbas A, Arin G (2002) An overview of biomass pyrolysis. Energy Sources Part A 24:471–482 Di Blasi C (2008) Modelling chemical and physical processes of wood and biomass pyrolysis. Prog Energy Combust Sci 34(1):47–90 Di Blasi C, Branca C (2000) The effects of water leaching on the isothermal degradation kinetics of straw. Ind Eng Chem Res 39(21):69–74 Di Blasi C, Branca C (2003) Kinetics of the isothermal degradation of wood in the temperature range 528–708 K. J Anal Appl Pyrol 67:207–219 Fantozzi F, Desideri U, Bartocci P, Colantoni S (2007) Rotary kiln slow pyrolysis for syngas and char production from biomass and waste – part II: working envelope of the reactor. ASME J Eng Gas Turbines Power 129:901–907 Foster A, Agblevor D, Grysko KR (2010) Pyrolysis technology: the environmentally friendly solution to nutrient management in the Chesapeake Bay, Department of Biological Systems Engineering, Virginia Tech, Blacksburg, VA 24061. Chesapeake Goal Line 2025 Presentation, Hunt Valley Gustafsson M (2013) Pyrolysis for heat production biochar – the primary byproduct. Gävle. Swedish University of Agricultural Sciences, Sweden. http://www.diva-portal.org/smash/get/diva2:655188/FULLTEXT02.pdf Hiroki H, Hiroomi H, Muhammad I (2014) Numerical analysis on wood pyrolysis in pre-vacuum chamber. J Sustain Bioenergy Syst 4:149–160 Published online September 2014 in SciRes. https://doi.org/10.4236/jsbs.2014.43014 International Biochar Initiative (2014) Frequently asked questions about biochar. International Biochar Initiative. www.google.com. Retrieved from http://www.biochar-international.org/biochar/faqs International Biochar Initiative (IBI) (2013) Standardized product definition and product testing guidelines for biochar that is used in soil. Available from: http://www.biochar-international.org/characterizationstandard21 Jelle R. (2016) Heat and mass transfer modelling of auger reactors. Master in de bio-ingenieurswetenschappen: Chemie en bioprocestechnologie, Faculteit Bio-ingenieurswetenschappen Academiejaar 2015–2016. Ghent Kambo HS, Dutta A (2015) A comparative review of biochar and hydro-char in terms of production, physico-chemical properties, and applications. Renew Sustain Energy Rev 45:359–378 Kantarelis E, Yang W, Blasiak W (2013) Chapter 8 biomass pyrolysis for energy and fuel production. In: Technologies for converting biomass to useful energy. CRC Press, Boca Raton, pp 245–277. https://www.diva-portal.org/smash/get/diva2:703293/FULLTEXT01.pdf Kelbon, M. (1983) The effects of moisture content on the pyrolysis of large wood particles. Master’s thesis, University of Washington, United States of America Lehmann J, Joseph S (eds) (2009) Biochar for environmental management: science and technology. Earthscan, London Leung L, Adetoyese OO, Chi WH (2012) Experimental and modelling studies of biomass pyrolysis. Ka Chin J Chem Eng 20(3):543–550 Hong Kong, China Levy, R. L., Wolf, C. J., and Fanter, D.L., (1972) Temperature rise time and true pyrolysis Liu G, Quek S (2003) The finite element method: a practical course. Butterworth-Heinemann, Oxford Luka, Z. (2009) Slow pyrolysis in a rotary kiln reactor: optimization and experiments. A Master’s thesis done at RES the School for Renewable Energy Science in affiliation with University of Iceland & the University of Akureyri, Akureyri Marc M (2016) Numerical Modelling of wood pyrolysis. Master of science thesis in chemical engineering. Department of Chemical Engineering, Royal Institute of Technology, Stockholm Matta J (2016) Biomass fast pyrolysis fluidized bed reactor: modelling and experimental validation, thesis submitted to the Faculty of Graduate and Postdoctoral Studies in partial fulfillment of the requirements for the degree. M.A.Sc. in Chemical Engineering, Department of Chemical and Biological Engineering, Faculty of Engineering, University of Ottawa, Canada McKinnon MB, Stoliarov SI, Witkowski A (2013) Development of a pyrolysis model for corrugated cardboard. Combust Flame 160:2595–2607 Miller RS, Bellan JA (1996) Generalized biomass pyrolysis model based on superimposed cellulose, hemicellulose and lignin kinetics. Combust Sci Technol 126:97–137 Miller RS, Bellan JA (1997) A generalized biomass pyrolysis model based on superimposed cellulose, hemicelluloses and lignin kinetics. Combust Sci Technol 126(1997):97–137 Milosavljevic I, Sunberg EM (1995) Cellulose thermal decomposition kinetics: global mass loss kinetics. Ind Eng Chem Res 34(4):1081–1091 Moghtaderi B (2006) The state-of-the-art in pyrolysis modelling of lignocellulosic solid fuels. Fire Mater 30(1):1–34 Mohammad U, Hossain J, Shazib U, Mohammad NI (2011) The utilization of waste date seed as bio-oil and activated carbon by pyrolysis process, Hindawi Publishing Corporation. Adv Mech Eng 2012:316806, 6 pages. https://doi.org/10.1155/2012/316806 Mohan D, Pittman CU, Steele PH (2006) Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuel 20:841–869 Morales S, Miranda R, Bustos D, Cazares T, Tran H (2014) Solar biomass pyrolysis for the production of biofuels and chemical commodities. J Anal Appl Pyrol 109:65–78 Morf P, Hasler P, Nussbaumer T (2002) Mechanisms and kinetics of homogeneous secondary reactions of tar from continuos pyrolysis of wood chips. Fuel 81:843–853 Nachenius RW, Kiel JHA, Prins W (2015) Torrefaction: upgrading biomass into high-quality solid bioenergy carriers. Biomass Power World 6:395–424 Ndukwu MC, Bennamoun L (2018) Potential of integrating Na2SO4 10H2O pellets in solar drying system. Dry Technol 36:1017–1030. https://doi.org/10.1080/07373937.2017.1366506 Ndukwu MC, Bennamoun L, Abam FI (2018) Experience of solar drying in Africa: presentation of designs, operations and models. Food Eng Rev 10:211–244. https://doi.org/10.1007/s12393-018-9181-2 Ndukwu MC, Simo-Tagne M, Abam FI, Onwuka OS, Prince S, Bennamoun L (2020a) Exergy, environmental and economic analysis of hybrid solar-biomass dryer integrated with copper tubing as a heat exchanger. Heliyon 6(2020):e03401 Ndukwu MC, Onyenwigwe D, Abam FI, Eke AB, Dirioha C (2020b, 2020) Development of a low-cost wind-powered active solar dryer integrated with glycerol as thermal storage. Renew Energy. https://doi.org/10.1016/j.renene.2020.03.016 Ndukwu MC, Horsfall IT, Ubouh EA, Orji FN, Ekop IE, Ezejiofor NR (2020c) J King Saud Univ – Eng Sci. https://doi.org/10.1016/j.jksues.2020.05.004 Nurhidayah MN, Adilah S, Nurhayati A (2012) Slow pyrolysis of cassava wastes for biochar production and characterization. Iran J Energy Environ 3(Special issue on environmental technology):60–65, 2012ISSN 2079-2115. https://doi.org/10.5829/idosi.ijee.2012.03.05.10 Nzihou A, Flamant G, Stanmore B (2012) Synthetic fuels from biomass using concentrated solar energy - a review. Energy 42:121–131 Papadikis K, Gu S, Bridgwater AV, Gerhauser H (2009) Application of CFD to model fast pyrolysis of biomass. Fuel Process Technol 90:504–512. https://doi.org/10.1016/j.fuproc.2009.01.010 Perondi D, Silva JP, Restelatto D, Collazzo GC, Dettmer A, Godinho M (2016) Thermal degradation of poultry litter wastes: pyrolysis reaction kinetic study. Congresso Braseleiro de Engenharia Quimica, pp 1–8 Quintiere JG (2006) Fundamentals of fire phenomena. Wiley, Chichester Saastamoined JJ (2006) Simplified model for calculation of devolatilization in fluidized beds. Fuel 85:2385–2395 Sekiguchi Y, Shafizadeh F (1984) The effect of inorganic additives on the formation, composition, and combustion of cellulosic char. J Appl Polym Sci 29(4):1267–1286 Shafizadeh F, Chin PPS (1976) Thermal deterioration of wood. Abstr Pap Am Chem Soc 172(Sep3):37–37. https://pubs.acs.org/doi/abs/10.1021/bk-1977-0043.ch005 Simo-Tagne M, Ndukwu MC, Zoulalian A, Bennamoun L, Kifani-Sahban F, Rogaume Y (2019) Numerical analysis and validation of a natural convection mix-mode solar dryer for drying red chili under variable conditions. Renew Energy. https://doi.org/10.1016/j.renene.2019.11.055 Sobamowo MG, Ojolo SJ, Osheku CA (2017) Analysis of pyrolysis kinetics of biomass particle under isothermal and non-isothermal heating conditions using the differential transformation method. Glob J Res Eng: A Mech Mech Eng 17(6):2249–4596. https://globaljournals.org/GJRE_Volume17/1-Analysis-of-Pyrolysis-Kinetics.pdf Uzza M, Joardder H, Uddin S, Islam MN (2011) The utilization of waste date seed as bio-oil and activated carbon by pyrolysis process, Hindawi Publishing Corporation. Adv Mech Eng 2012:316806, 6 pages. https://doi.org/10.1155/2012/316806 Vamvuka D (2011) Bio-oil, solid and gaseous biofuels from biomass pyrolysis processes – an overview. Int J Energy Res 35:835–862 Verheijen FG, Jeffrey A, Bastos S, van der Velde AC, Diafas I (2009) Biochar application to soils – a critical scientific review of effects on soil properties, P and functions. EUR 24099 EN. Office for the Official Publications of the European Communities, Luxembourg, p 149 Wang Y, Yan L (2008) CFD studies on biomass thermochemical conversion. Int J Mol Sci 9:1108–1130. https://doi.org/10.3390/ijms9061108 Yang SI, Wu MS, Wu CY (2014) Application of biomass fast pyrolysis part I: pyrolysis characteristics and products. Energy 66:162–171 Zeng K, Pham D, Minh B, Daniel Gauthier A, Weiss-Hortal E, Nzihou N, Flamant G (2015) The effect of temperature and heating rate on char properties obtained from solar pyrolysis of beech wood. Bioresour Technol 182:114–119 Zeng K, Gauthier D, Pham Minh D, Weiss-Hortala E, Nzihou A, Flamant G (2017) Characterization of solar fuels obtained from beech wood solar pyrolysis. Fuel 188:285–293