Proposed soil classification based on the experiences of soft-ground tunneling in Iran
Tóm tắt
Từ khóa
Tài liệu tham khảo
Anonymous (1979) Classification of rocks and soils for engineering geological mapping. Part I: Rock and soil materials. Bull Int Assoc Eng Geol 19:364–371
Babendererde L (2003) Problems of TBMs in water bearing ground. In: Proceedings of Summer school 2003 on Rational Tunneling. University of Innsbruck, pp 20
Ball RPA, Young DY, Isaacson J, Champa J, Gause C (2009) Research in soil conditioning for EPB tunneling through difficult soils. In: Almeraris G, Mariucci B (eds) Rapid excavation and tunneling conference (RETC). Las Vegas, USA, pp 320–333
Bell FG (2000) Engineering properties of soils and rocks. Blackwell Science Ltd., Oxford
Bruland A (1998) Hard rock tunnel boring: drillability test methods. Project report 13A-98, NTNU Trondheim
BTS (2005) Closed-face tunneling machines and ground stability. British Tunneling Society (Closed-Face Working Group) in association with the Institution of Civil Engineers: Thomas Telford Publishing, London
Cerchar (Centre d’Études et des Recherches des Charbonages de France) (1986) The Cerchar abrasiveness index. Center of Study and Research of the French Coal Industry, Verneul
DiPonio MA, Chapman D, Bournes C (2007) EPB tunnel boring machine design for boulder conditions. In: Traylor MT, Townsend JW (eds.) Rapid excavation and tunneling conference (RETC), Toronto, Canada, pp 215–228
Dowden PB, Robinson RA (2001) Coping with boulders in soft ground tunneling. In: Hansmire WH, Gowring IM (eds.) Proceedings rapid excavation and tunneling conference (RETC), San Diego, USA, pp 961–977
EFNARC (2005) Specification and guidelines for the use of specialist products in mechanized tunneling (TBM) in soft ground and hard rock (April)
Fakher A, Cheshomi A, Khamechian M (2007) The addition of geotechnical properties to a geological classification of coarse-grain alluvium in a pediment zone. Q J Eng Geol Hydrogeol 40:163–174
Frank G, Chapman D (2005) New model for characterizing the cobble and boulder fraction for soft ground tunneling. In: Hutton JD, Rogstad D (eds.) Rapid excavation and tunneling conference (RETC), Seattle, USA, pp 780–791
Gong W, Luo Z, Juang CH, Huang H, Zhang J, Wang L (2014) Optimization of site exploration program for improved prediction of tunneling-induced ground settlement in clays. Comput Geotech 56:69–79
Guglielmetti V, Grasso P, Mahtab M, Xu S (2007) Mechanized tunneling in urban areas: design methodology and construction control. Taylor & Francis/Balkema, Leiden
Hashemnejad A, Ghafoori M, Lashkaripour GR, Tarigh Azali S (2012) Effect of geological parameters on soil abrasivity using LCPC machine for predicting LAC. Int J Emerg Technol Adv Eng 2(12):71–76 (ISSN 2250-2459, ISO 9001:2008 Certified Journal)
Hashemnejad A, Ghafoori M, Tarigh Azali S (2015) Utilizing water, mineralogy and sedimentary properties for predicting LCPC abrasivity coefficient (LAC). Bull Eng Geol Environ. doi: 10.1007/s10064-015-0779-9
Hassanpour J, Rostami J, Tarigh Azali S (2013) Engineering geological characterizing of alluvial sediments along the Line A of Qom metro project, Iran. In: Anagnostou G, Ehrbar H (eds.) ITA-AITES world tunnel congress (WTC), Geneva, Switzerland, pp 1047–1054
Heuer RE, Virgens DL (1987) Anticipated behavior of silty sands in tunneling. In: Jacobs JM, Hendricks RS (eds.) Rapid excavation and tunneling conference (RETC), New Orleans, USA, Proceedings, vol. 1, pp 221–237
Holman FS, Thewes M (2013) Assessment method for clay clogging and disintegration of fines in mechanized tunneling. Tunn Undergr Space Technol 37(13):96. doi: 10.1016/j.tust.2013.03.010
Huang H, Gong W, Khoshnevisan S, Juang CH, Zhang D, Wang L (2015) Simplified procedure for finite element analysis of the longitudinal performance of shield tunnels considering spatial soil variability in longitudinal direction. Comput Geotech 64:132–145
Hunt SW (2002) Compensation for boulder obstructions. In: Ozdemir L (ed.) North American Tunneling (NAT), Seattle, USA, pp 23–36
Hunt SW, Del Nero DE (2010) Two decades of advances investigating base lining and tunneling in bouldery ground. ITA-AITES World Tunneling Congress (WTC), Vancouver, Canada
JICA (2000) The study on seismic microzoning of the greater Tehran area in the Islamic Republic of Iran. A report from Center for Earthquake an Environmental Studies of Tehran (CEST) and Japan International Cooperation Agency (JICA), Tehran Municipality, Tehran, Iran
Kieffer DS, Leelasukseree C, Mustoe GGW (2008) Disc cutter performance in boulder laden ground. In: Roach MF, Ofiara D, Townsend BF, Kritzer MR (eds.) North American tunneling conference (NAT), pp 129–136
Langmaack L (2002) Soil conditioning for TBM—chances and limits. Journées d’ E’tudes Internationales de Toulouse—underground works, living structures. Association Française des Tunnels et de l’Espace Souterrain (AFTES)
Langmaack L, Feng Q (2005) Soil conditioning for EPB machines: balance of functional and ecological properties. In: Erdem Y, Solak T (eds.) ITA-AITES world tunnel congress (WTC), Istanbul, Turkey, pp 729–735
Marinos PG, Novack M, Benissi M, Panteliadou M, Papouli D, Stoumpos G, Marinos V, Korkaris K (2008) Ground information and selection of TBM for the Thessaloniki Metro, Greece. Environ Eng Geosci XIV 1:17–30
Marinos PG, Novack M, Benissi M, Stoumpos G, Papouli D, Panteliadou M, Marinos V, Boronkay K, Korkaris K (2009) Assessment of ground conditions with respect to mechanized tunneling for the construction of extension of the Athens Metro to the city of Piraeus. Bull Eng Geol Environ 68(1):17–26
Martinotto A, Langmaack L (2007) Toulouse Metro Lot 2: soil conditioning in difficult ground conditions. In: Barták J, Hrdina I, Romancov G, Zlámal J (eds) ITA-AITES world tunnel congress (WTC), Prague, Czech Republic, pp 1211–1216
Nilsen B, Dahl F, Holzhäuser J, Raleigh P (2006) Abrasivity of soils in TBM tunneling. Tunnels and Tunneling International, pp 36–38 (March 2006)
Nilsen B, Dahl F, Holzhäuser J, Raleigh P (2006) SAT: NTNU’s new soil abrasion test. Tunnels and Tunneling International, pp 43–45 (May 2006)
Nilsen B, Dahl F, Holzhäuser J, Raleigh P (2007) New test methodology for estimating the abrasiveness of soils for TBM tunneling. In: Traylor MT, Townsend JW (eds) Rapid excavation and tunneling conference (RETC), Toronto, Canada, pp 104–116
O’Carroll JB (2005) A guide to planning, constructing and supervising earth pressure balance TBM Tunneling. Parsons Brinckerhoff Publishing, New York
Parker HW (2005) Site investigation. In: Erdem Y, Solak T (eds) ITA-AITES World Tunnel Congress (WTC), Istanbul, Turkey, Training Course
Pedrami M (1981) Pasadenian orogeny and geology of last 700,000 years of Iran. Geological Survey of Iran, pp 273 (in Persian)
Plinninger RJ, Restner U (2008) Abrasiveness testing, quo vadis?—a commented overview of abrasiveness testing methods. Geomech Tunnel 1(1):61–70
Price DG (2009) Engineering geology principles and practice. In: de Freitas MH (ed) Springer, London
Rieben EH (1966) Geological observation at alluvial deposits in northern Iran. Geological Organization of Iran, Report, pp 9 (in Persian)
Rieker K (2005) Comparison of face pressurized shield methods in various soil conditions. In: Hutton JD, Rogstad D (eds) Rapid excavation and tunneling conference (RETC), Seattle, USA, pp 307–317
Rienzo FD, Oreste P, Pelizza S (2008) Subsurface geological–geotechnical modeling to sustain underground civil planning. Eng Geol 96(3–4):187–204
Sass I, Burbaum U (2008) A method for assessing adhesion of clays to tunneling machines. Bull Eng Geol Environ 68(1):27–34
Shafiee A, Azadi A (2007) Shear-wave velocity characteristics of geological units throughout Tehran City, Iran. J Asian Earth Sci 29:105–115
Tarigh Azali S, Moammeri H (2012) EPB-TBM tunneling in abrasive ground, Esfahan Metro Line 1. In: Phienwej N, Boonyatee T (eds) ITA-AITES world tunnel congress (WTC), Bangkok, Thailand
Terzaghi K (1950) Geologic aspects of soft-ground tunneling. In: Trask PD (ed) Applied sedimentation. Wiley, New York, pp 193–209
Thewes M (2007) TBM tunneling challenges—redefining the state of the art. In: Barták J, Hrdina I, Romancov G, Zlámal J (eds) ITA-AITES world tunnel congress (WTC), Prague, Czech Republic, Keynote Lectures
Thewes M, Burger W (2004) Clogging risks for TBM drives in clay. Tunnels and Tunneling International 28–31 (June)
Thompson J, Chai J, Biggart A, Young D (2008) Earth pressure balance machines for the Silicon Valley rapid transit project—basis of design. In: Roach MF, Ofiara D, Townsend BF, Kritzer MR (eds) North American tunneling conference (NAT), San Francisco, USA, pp 168–176
Thuro K, Käsling H (2009) Classification of the abrasiveness of soil and rock. Geomech Tunnel 2(2):179–188
Thuro K, Singer J, Käsling H, Bauer M (2007) Determining abrasiveness with the LCPC test. In: Proceedings of the 1st Canada—US Rock Mechanics Symposium, Vancouver BC
Venkatramaiah C (2006) Geotechnical engineering. New Age International Publishers, New Delhi
Wassmer L, Treceno O, Andreossi E, Re S (2001) Tunnel boring machine (TBM) applications in soft ground conditions. IMIA Meeting 2001, Sydney