Properties of Ti(C,N)-based cermets reinforced with ZrO2 whiskers deposited via sulfate flux at high temperatures

Zhang, 2020, Investigation of the oxidation behavior and high oxidation-resistant mechanism of Ti(C,N)-based cermets[J], Corrosion Sci., 177, 10.1016/j.corsci.2020.108959 de la Obra, 2020, Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase[J], J. Alloys Compd., 814, 10.1016/j.jallcom.2019.152218 Peng, 2020, Chatter stability and precision during high-speed ultrasonic vibration cutting of a thin-walled titanium cylinder[J], Chin. J. Aeronaut., 33, 3535, 10.1016/j.cja.2020.02.011 Xu, 2020, Effect of Cu addition on the microstructures and properties of ultrafine Ti(C,N)-based cermet[J], Vacuum, 181, 109753, 10.1016/j.vacuum.2020.109753 Zhang, 2019, Effect of WC content on the microstructure and mechanical properties of Ti (C,N)-based cermets fabricated by in situ carbothermal reduction of TiO2[J], Mater. Sci. Eng., A, 761, 138024, 10.1016/j.msea.2019.138024 Gan, 2019, Ti(C,N)-based cermets by vacuum sintering using Commercial Composite powders: morphology evolution, Composition and related properties[J], Vacuum, 170, 10.1016/j.vacuum.2019.108983 Xu, 2016, Servitization of manufacturing industry: a realistic choice for upgrading China's manufacturing industry[J], Economist, 9, 59 Xu, 2019, Improvement in wear and corrosion resistance of Ti(C,N)-based cermets via Aluminum nitride additions[J], Vacuum, 168, 108849, 10.1016/j.vacuum.2019.108849 Zhang, 2015, The dynamic mechanism and strategic trend of the transformation and upgrading of China's manufacturing industry under the new normal[J], Inquiry into Economic Issues, 6, 144 Dong, 2020, Ti(C,N)-based cermets with fine grains and uniformly dispersed binders:Effect of the Ni-Co based binders[J], Ceram. Int., 46, 6300, 10.1016/j.ceramint.2019.11.102 Wang, 2020, Heterogeneous nucleation of M2B-type borides (M =Cr, Fe) attached to TiB2 and Ti(C,N) particles in as-cast high borated steel[J], Mater. Char., 169, 110588, 10.1016/j.matchar.2020.110588 Yang, 2021, Influence of Mo addition on microstructure and mechanical properties of Ti(C,N)-based cermets fabricated by in-situ carbothermal reduction of TiO2[J], Vacuum, 184, 10.1016/j.vacuum.2020.109912 Wu, 2011, Effect of SiC whisker addition on the microstructures and mechanical properties of Ti(C,N)-based cermets[J], Mater. Des., 2, 951, 10.1016/j.matdes.2010.07.028 Li, 2010, Preparation and thermal shock resistance of Ti(C,N)-based cermets toughened by carbon nanotubes[J], Heat Treat. Met., 35, 37 Cui, 2019, Determination of microstructure and mechanical properties of graphene reinforced Al2O3-Ti(C,N) ceramic composites[J], Ceram. Int., 45, 20593, 10.1016/j.ceramint.2019.07.041 Zhang, 2019, Preparation and properties of ZrO2Ceramics by microwave sintering[J], J. Chin. Ceram. Soc., 47, 353 Xu, 2019, Preparation of monodisperse ZrO2 ceramic microspheres (> 200 mum) by coaxial capillary microfluidic device assisted internal gelation process[J], Ceram. Int., 45, 19627, 10.1016/j.ceramint.2019.06.210 Fu, 2019, Coating Y2O3 nano-particles with ZrO2-additive via precipitation method for colloidal processing of highly transparent Y2O3 ceramics[J], J. Eur. Ceram. Soc., 39, 4996, 10.1016/j.jeurceramsoc.2019.07.011 Vojtko, 2020, Coarse-grain CeO2 doped ZrO2 ceramic prepared by spark plasma sinterin[J], J. Eur. Ceram. Soc., 40, 4844, 10.1016/j.jeurceramsoc.2020.05.014 Xu, 2015, Preparation of ZrO2whiskers through high pressure and high temperature method[J], Solid State Sci., 41, 52, 10.1016/j.solidstatesciences.2015.01.009 Murase, 2010, Preparation of zirconia whiskers from zirconium hydroxide in sulfuric acid solutions under hydrothermal conditions at 200°C[J], J. Am. Ceram. Soc., 84, 2705, 10.1111/j.1151-2916.2001.tb01076.x Epassaka, 2003, Morphological instability of ZrO2 crystallites formed by CVD technique operated under atmospheric pressure[J], J. Mater. Sci., 38, 3239, 10.1023/A:1025125702505 Wang, 2019, Simple and novel synthesis of zirconia whiskers from a phosphate flux[J], Ceram. Int., 45, 4514, 10.1016/j.ceramint.2018.11.135 Li, 2020, Fabrication of ZrO2 whisker modified ZrO2 ceramics by oscillatory pressure sintering[J], Ceram. Int., 46, 17684, 10.1016/j.ceramint.2020.04.071 Fang, 2019, Effect of ZrO2 whiskers on the microstructure and mechanical properties of a Ti(C,N)‐based cermet cutting tool material[J], Int. J. Appl. Ceram. Technol., 16, 1347, 10.1111/ijac.13186 Wang, 2013, Single edge-notched beam fracture toughness of needling C/C composites[J], J. Solid Rocket Technol., 36, 564 Fang, 2018, Preparation and characterization of monoclinic rod-shaped ZrO2 whiskers via sulfate flux[J], Ceram. Int., 44, 10094, 10.1016/j.ceramint.2018.02.218 M Kumar, 2007, Crater wear mechanisms of TiCN-Ni-WC cermets during dry machining[J], Int. J. Refract. Metals Hard Mater., 25, 392, 10.1016/j.ijrmhm.2006.12.001 Zhou, 2019, Mullite whisker-mullite/yttrium aluminosilicate oxidation protective coatings for SiC coated C/C composites[J], Ceram. Int., 45, 24022, 10.1016/j.ceramint.2019.08.105 Pu, 2020, Oxidation and thermal cycling behavior of c-AlPO4 and SiC whisker co-modified mullite deposited on SiC-C/SiC composites[J], Surf. Coating. Technol., 400, 126201, 10.1016/j.surfcoat.2020.126201 Cheng, 1998, Relationships between hardness, elastic modulus, and the work of indentation[J], Appl. Phys. Lett., 73, 614, 10.1063/1.121873 Bao, 2004, Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measure-ments[J], Acta Mater., 52, 5397, 10.1016/j.actamat.2004.08.002 Simunek, 2006, Hardness of covalent and ionic crystals: first-principle calculations[J], Phys. Rev. Lett., 96, 85501, 10.1103/PhysRevLett.96.085501 Alpert, 1988, Temperature dependence of hardness of Alumina-Based ceramics[J], Journal of Ceramic Science and Technology, 71, 371 Zheng, 2018, Fabrication and wear mechanism of Ti(C,N)-based cermets tools with designed microstructures used for machining aluminum alloy[J], Vacuum, 156, 30, 10.1016/j.vacuum.2018.07.012 Bolognini, 2003, TiMoCN-based cermets: high temperature deformation[J], Int. J. Refract. Metals Hard Mater., 21, 19, 10.1016/S0263-4368(02)00091-4 Green, 1998 Zou, 2012, High temperature bending strength, internal friction and stiffiiess of ZrB2-20vol% SiC ceramics[J], J. Eur. Ceram. Soc., 32, 2519, 10.1016/j.jeurceramsoc.2012.01.035