Tính Chất của Nhựa Tăng Cường Sợi Carbon Sản Xuất Bằng Công Nghệ Hàn

G. V. Malysheva, M. V. Shablygin, and T. A. Guzeva, “Method for assessing aramide fiber microstructure features,” Fibre Chem. 47 (2), 85–88 (2015). N. I. Baurova, “Surface structure of fractured carbon-fiber composites before and after climatic aging,” Fibre Chem. 46 (4), 241–244 (2014). A. S. Borodulin, A. N. Marysheva, and G. V. Malysheva, “Simulation of impregnation kinetics of fabric fillers in the production of fiberglass articles,” Glass Phys. Chem. 41 (6), 660–664 (2015). N. I. Baurova, “Use of catastrophe theory for calculation the sudden failure of joints involving polymer,” Theor. Found. Chem. Eng. 43 (3), 345–348 (2009). L. P. Kobets, A. S. Borodulin, and G. V. Malysheva, “Study of microcapillary impregnation of carbon fiber by epoxy binder,” Fibre Chem. 48 (4), 311–315 (2016). A. I. Rudskoi and N. I. Baurova, “Technological heredity during the production and operation of structural materials,” Russ. Metall. (Metally), No. 13, 1378–1383 (2019). E. N. Kablov, G. M. Gunyaev, S. I. Il’chenko, V. V. Krivonos, A. F. Rumyantsev, T. N. Kavun, O. A. Komarova, A. N. Ponomarev, I. S. Deev, and V. M. Aleksashin, “Structural carbon plastics with a high conductivity,” Aviats. Mater. Tekhnol., No. 2, 36–54 (2004). N. I. Baurova and V. A. Zorin, Application of Polymer Composite Materials in the Manufacture and Repair of Machines: A Textbook (MADI, Moscow, 2016). N. Baurova, A. Anoprienko, and Y. Romanova, “Providing dismountable rivet bonded joints through the use of hot-melt adhesives,” ICMTMTE 129, 01004 (2017). https://doi.org/10.1051/matecconf/201712901004 A. Yu. Konoplin and N. I. Baurova, “Hardness of the near-weld zone during contact spot welding of steels using an adhesive-weld technology,” Russ. Metall. (Metally), No. 13, 1308–1311 (2016). A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders, and Adhesive Prepregs: A Textbook, Ed. by E. N. Kablov (VIAM, Moscow, 2017). Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva, Adhesion of Modified Epoxides to Fibers (TORUS PRESS, Moscow, 2018). M. A. Gorodetskii, V. A. Nelyub, G. V. Malysheva, A. Yu. Shaulov, and A. A. Berlin, “Technology of forming and the properties of reinforced composite based on an organic binder,” Russ. Metall. (Metally), No. 13, 1195–1198 (2018). V. A. Nelyub and A. A. Berlin, “Formation of carbon fiber parts using carbon tapes with metal coatings,” Khim. Prom. Segodnya, No. 1, 38–43 (2019). V. A. Nelyub, “Technologies of metallization of carbon fabric and the properties of the related carbon fiber reinforced plastics,” Russ. Metall. (Metally), No. 13, 1199–1201 (2018). V. A. Nelyub, B. L. Gorberg, M. V. Crishin, and G. V. Malysheva, “Properties and technology of applying metal coatings to carbon tape,” Fibre Chem. 50 (6), 524–527 (2019). N. I. Baurova and V. A. Zorin, Technological Heredity in the Production of Machine Parts from Polymer Composite Materials: A Monograph (MADI, Moscow, 2018). V. A. Nelyub, D. V. Grashchenkov, D. I. Kogan, and I. A. Sokolov, “Use of direct molding methods in the production of large fiberglass parts,” Khim. Tekhnol. 13 (12), 735–739 (2013). Technology of Producing Articles and Integral Structures from Composite Materials in Mechanical Engineering, Ed. by A. G. Bratukhin, V. S. Bogolyubov, and O. S. Sirotkin (Gotika, Moscow, 2003).