Properties and Assessment of Applications of Red Mud (Bauxite Residue): Current Status and Research Needs
Tóm tắt
In order to conserve natural resources and prevent waste generation, effective utilization of industrial wastes and/or by-products for beneficial engineering applications becomes inevitable. In order to accomplish this, extensive research studies, exploring properties and new applications of waste materials in a sustainable and environmentally friendly manner, have been initiated worldwide. Red mud (RM, also known as bauxite residue) is one of the wastes generated by the aluminium industry and its disposal and utilization have been traditionally hindered due to the extreme alkalinity (pH about 10.5–13.5). To date, no comprehensive review on various properties of RM of different origin and associated challenges in using it as a beneficial engineering material has been performed. The objective of this study is first to critically appraise the current understanding of properties of RM through a comprehensive literature review and detailed laboratory investigations conducted on Indian RM by the authors, to assess and identify the potential engineering applications, and to finally discuss associated challenges in using it in practical applications. Physical, chemical, mineralogical and geotechnical properties of RMs of different origin and production processes are reviewed. Mechanisms behind the pozzolanic reaction of RM under different chemical and mineralogical compositional conditions are discussed. Environmental concerns associated with the use of RM are also raised. Studies relevant to leachability characteristics reveal that most of the measured chemical concentrations are within the permissible regulatory limits. Overall, the review shows that RM disposal and reuse is complicated by its extreme alkalinity, which is also noticed to be influencing multiple engineering properties. But with selected pH amendments, the treated RM is found to have significant potential to be used as an effective and sustainable geomaterial. The assessment is majorly based on the characteristics of Indian RMs; hence the adaptation of the findings to other RMs should be assessed on a case-by-case basis. Moreover, field studies demonstrating the performance of RM in various engineering applications are warranted.
Tài liệu tham khảo
Panda, I., Jain, S., Das, S.K., Jayabalan, R.: Characterization of red mud as a structural fill and embankment material using bioremediation. Int. Biodeterior. Biodegrad. 119, 368–376 (2017)
Rai, S., Wasewar, K.L., Mukhopadhyay, J., Yoo, C.K., Uslu, H.: Neutralization and utilization of red mud for its better waste management. Arch. Environ. Sci. 6, 13–33 (2012)
Bardossy, G.: Karst Bauxites, Bauxite Deposits on Carbonate Rocks, Developments in Economic Geology, vol 14, 1st edn, p. 441. Elsevier, Amsterdam (1982)
Kehagia, F.: A successful pilot project demonstrating the re-use potential of bauxite residue in embankment construction. Resour. Conserv. Recycl. 54, 417–421 (2010)
Sun, C., Chen, J., Tian, K., Peng, D., Liao, X., Wu, X.: Geochemical characteristics and toxic elements in alumina refining wastes and leachates from management facilities. Int. J. Environ. Res. Public Health 16(7), 1297 (2019)
Banvoelgyi, G., Huan, T.M., Director, F.G.: De-watering, disposal and utilization of red mud: state of the art and emerging technologies. In: Proceedings of XVIII International Symposium of ICSOBA, Zhengzhou, China, pp. 431–443 (2010)
Evans, K.: The history, challenges, and new developments in the management and use of bauxite residue. J. Sustain. Metall. 2(4), 316–331 (2016)
Wang, L., Hu, G., Lyu, F., Yue, T., Tang, H., Han, H., Yang, Y., Liu, R., Sun, W.: Application of red mud in wastewater treatment. Minerals 9(5), 281 (2019)
Power, G., Gräfe, M., Klauber, C.: Review of Current Bauxite Residue Management, Disposal and Storage: Practices, Engineering and Science. CSIRO Document, DMR-3608, pp. 3−4 (2009)
Lima, M.S.S., Thives, L.P., Haritonovs, V., Bajars, K.: Red mud application in construction industry: review of benefits and possibilities. IOP Conf Ser Mater Sci Eng 251(1), 012033 (2017)
International Aluminum Institute (IAI): Opportunities for Use of Bauxite Residue in Portland Cement Clinker Production. World Alumina, p. 57 (2018a)
European Environment Agency: Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on Waste and Repealing Certain Directives (Text with EEA Relevance) European Environment Agency (2008)
CPCB: Guidelines on Environmental Management of Construction and Demolition (C and D) Wastes, p. 81. Central Pollution Control Board, Ministry of Environment, Forests and Climate Change (2017)
USEPA: Sustainable Materials Management Program Strategic Plan. Fiscal Years 2017–2022, p. 8. United States Environmental Protection Agency (2015)
Ruyters, S., Mertens, J., Vassilieva, E., Dehandschutter, B., Poffijn, A., Smolders, E.: The red mud accident in Ajka (Hungary): plant toxicity and trace metal bioavailability in red mud contaminated soil. Environ. Sci. Technol. 45(4), 1616–1622 (2011)
Banvolgyi, G.: The lessons learnt from the failure of the embankment of the red mud reservoir at Ajka (Hungary). In: Proceedings of the International Conference and Exhibition on Aluminium (INCAL), Bhubaneswar, India, pp. 88–89 (2019)
Mayes, W.M., Jarvis, A.P., Burke, I.T., Walton, M., Feigl, V., Klebercz, O., Gruiz, K.: Dispersal and attenuation of trace contaminants downstream of the Ajka bauxite residue (red mud) depository failure, Hungary. Environ. Sci. Technol. 45(12), 5147–5155 (2011)
Mayes, W.M., Burke, I.T., Gomes, H.I., Anton, Á.D., Molnár, M., Feigl, V., Ujaczki, É.: Advances in understanding environmental risks of red mud after the Ajka Spill, Hungary. J. Sustain. Metall. 2(4), 332–343 (2016)
Gelencsér, A., Kováts, N., Turóczi, B., Rostási, Á., Hoffer, A., Imre, K., Nyirő-Kósa, I., Csákberényi-Malasics, D., Tóth, A., Czitrovszky, A., Nagy, A.: The red mud accident in Ajka (Hungary): characterization and potential health effects of fugitive dust. Environ. Sci. Technol. 45(4), 1608−1615 (2011)
Reddy, N.G., Rao, B.H., Reddy, K.R.: Biopolymer amendment for mitigating dispersive characteristics of red mud waste. Geotech. Lett. 8(3), 201–207 (2018)
International Aluminum Institute (IAI): Sustainable Bauxite Mining Guidelines. World Alumina, p. 116 (2018b)
Ding, X., Xu, G., Kizil, M., Zhou, W., Guo, X.: Lignosulfonate treating bauxite residue dust pollution: enhancement of mechanical properties and wind erosion behavior. Water Air Soil Pollut. 229(7), 214, 1−13
Arulrajah, A., Piratheepan, J., Disfani, M.M., Bo, M.W.: Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications. J. Mater. Civ. Eng. 25(8), 1077–1088 (2012)
Correia, A.G., Winter, M.G., Puppala, A.J.: A review of sustainable approaches in transport infrastructure geotechnics. Transp. Geotech. 7, 21–28 (2016)
Bhagwan, J., Vittal, U.K.G.: Use of marginal materials for rural road construction—some recent initiatives. In: Proceedings of Indian Geotechnical Conference (IGC-2014), Kakinada, India, pp. 2478−2485 (2014)
Qi, J.Z.: Experimental Research on Road Materials of Red Mud. University of Huazhong Science and Technology, Wuhan (2005)
Sundaram, R., Gupta, S.: Construction of foundation on red mud. In: Dutta, M., Srivastava R.K., Ramana G.V., Shahu J.T. (eds) 6th International Congress on Environmental Geotechnics, New Delhi, India, pp. 1172−1175 (2010)
Reddy, N.G., Rao, B.H.: Compaction and consolidation behaviour of untreated and treated waste of Indian red mud. Geotech. Res. 5(2), 105–121 (2018)
Newson, T., Dyer, T., Adam, C., Sharp, S.: Effect of structure on the geotechnical properties of bauxite residue. J. Geotech. Geoenviron. Eng. 132(2), 143–151 (2006)
Kalkan, E.: Utilization of red mud as a stabilization material for the preparation of clay liners. Eng. Geol. 87, 220–229 (2006)
Rout, S.K., Sahoo, T., Das, S.K.: Design of tailing dam using red mud. Cent. Eur. J. Eng. 3(2), 316–328 (2013)
Reddy, N.G., Chandra, K.S., Rao, B.H.: Assessment of industrial wastes as a road construction material: a review. In: Proceedings of 1st International Conference on Recent Innovations in Engineering and Technology (ICREIAT-2016), 22−23 December, Hyderabad, India, pp. 28−34 (2016)
Jitsangiam, P., Nikraz, H., Jamieson, E., Kitanovich, R., Siripun K.: Sustainable use of a bauxite residue (red sand) as highway embankment materials. In: 3rd International Conference on Sustainable Engineering and Science, 9 December, Auckland, New Zealand (2008)
Paramguru, R.K., Rath, P.C., Misra, V.N.: Trends in red mud utilization—a review. Min. Process. Extr. Metall. Rev. 26(1), 1–29 (2005)
Oprčkal, P., Mladenovič, A., Zupančič, N., Ščančar, J., Milačič, R., Serjun, V.Z.: Remediation of contaminated soil by red mud and paper ash. J. Clean. Prod. 256, 120440 (2020)
Youssef, N.F., Shater, M.O., Abadir, M.F., Ibrahim, O.A.: Utilization of red mud in the manufacture of ceramic tiles. Key Eng. Mater. 206–213(Pt. 3, Euro Ceramics VII), 1775–1778 (2002)
Villar, L.F.S., Campos, T.M.P., Azevedo, R.F., Zornberg, J.G.: Influence of laboratory techniques on the geotechnical characterization of mining and industrial wastes. In: Proceedings of 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria, Egypt, pp. 186−189 (2009)
ASTM: Standard Test Method D6907-05, Standard Practice for Sampling Contaminated Media with Hand-Operated Bucket Augers, ASTM International, West Conshohocken (2016)
Reddy, N.G., Rao, B.H.: Evaluation of the Compaction Characteristics of Untreated and Treated Red Mud. Geotechnical Special Publication 272, Geo-Chicago, ASCE, pp. 23−32 (2016)
Reddy, N.G., Rao, B.H.: Assessment of dispersion characteristics of red mud waste from physical tests. In: Proceedings of Indian Geotechnical Conference (GeoNEst), 14−16 December, p. 4. IIT, Guwahati (2017)
Reddy, N.G., Rao, B.H.: Characterization of settled particles of the red mud waste exposed to different aqueous environment conditions. Indian Geotech. J. 48(3), 405–419 (2018)
Reddy, N.G., Rao, B.H.: Effect of additives on consistency limits of red mud waste: a comparative study. In: Zhan, L., Chen, Y., Bouazza, A. (eds) Proceedings of 8th International Congress on Environmental Geotechnics, Environmental Science and Engineering, p 3. Springer, Singapore (2019)
Reddy, N.G., Rao, B.H., Reddy, K.R.: Chemical analysis procedures for determining the dispersion behaviour of red mud. In: Agnihotri, A., Reddy, K., Bansal, A. (eds.) Recycled Waste Materials. Lecture Notes in Civil Engineering, vol. 32, pp. 19–26. Springer, Singapore (2019)
Rao, B.H., Reddy, N.G.: Zeta potential and particle size characteristics of red mud waste. In: Babu, G.L.S., Reddy, K.R., De, A., Datta, M. (eds.) Geoenvironmental Practices and Sustainability, pp. 69–89. Springer, Singapore (2017)
Mishra, M.C., Babu, K.S., Reddy, N.G., Dey, P.P., Rao, B.H.: Performance of lime stabilization on extremely alkaline red mud waste under acidic environment. J. Hazard. Toxic Radioact. Waste 23(4), 04019012 (2019)
Terzaghi, K., Peck, R.B., Mesri, G.: Soil Mechanics in Engineering Practice. Wiley, New York (1996)
Kumar, H., Cai, W., Lai, J., et al.: Influence of in-house produced biochars on cracks and retained water during drying-wetting cycles: comparison between conventional plant, animal and nano-biochars. J. Soils Sediments 20, 1983–1996 (2020)
Das, S.K., Rout, S., Alam, S.: Characterization of red mud as a subgrade construction material, In: 3rd Conference of the Transportation Research Group of India, Kolkata, West Bengal (3rd CTRG), 17-20 December (2015)
Rubinos, D., Spagnoli, G., Barral, M.T.: Assessment of bauxite refining residue (red mud) as a liner for waste disposal facilities. Int. J. Min. Reclam. Environ. 29(6), 433–452 (2015)
Nath, H., Sahoo, P., Sahoo, A.: Characterization of red mud treated under high temperature fluidization. Power Technol. 269, 233–239 (2015)
Borra, C.R., Pontikes, Y., Binnemans, K., Gerven, T.V.: Leaching of rare earths from bauxite residue (red mud). Miner. Eng. 76, 1–8 (2015)
Wagh, A.S.: Settling properties of dilute Bayer process muds of alumina industry in Jamaica. Part. Multiphase Process. 3, 461–469 (1987)
Wehr, J.B., Fulton, I., Menzies, N.W.: Revegetation strategies for bauxite refinery residue: a case study of Alcon Gove in Northern Territory, Australia. Environ. Manag. 27(3), 297–306 (2006)
Alam, S., Das, S.K., Rao, B.H.: Characterization of coarse fraction of red mud as civil engineering construction material. J. Clean. Prod. 168, 679–691 (2017)
Donoghue, A.M., Frisch, N., Olney, D.: Bauxite mining and alumina refining: process description and occupational health risks. J. Occup. Environ. Med. 56(5 Suppl), S12 (2014)
Pradhan, J., Das, S.N., Rao, J., Thakur, R.S.: Characterization of Indian red muds and recovery of their metal values. In: Hale, W. (ed.) Light Metals, pp. 87–92. TMS, Anaheim (1996)
Wang, P., Liu, D.: Physical and chemical properties of sintering red mud and Bayer red mud and the implications for beneficial utilization. Materials 5(10), 1800–1810 (2012)
Benson, C.H., Trast, J.M.: Hydraulic conductivity of thirteen compacted clays. Clays Clay Miner. 43, 669–681 (1995)
Daniel, D.E.: Summary review of construction quality control for earthen liners. In: Bonaparte, R. (ed.) Waste Containment Systems: Construction, Regulation, and Performance, vol. 26, pp. 175–189. ASCE, Reston (1990)
Benson, C.H., Othman, M.A.: Hydraulic and mechanical characteristics of a compacted municipal solid waste compost. Waste Manag. Res. 11(2), 127–142 (1993)
Tong, L., Wang, Y.H.: DEM simulation of shear modulus and damping ratio of sand with emphasis on the effect of particle number, particle shape and aging. Acta Geotech. 10, 117–130 (2015)
Zhuang, L., Nakata, Y., Kim, U.G., Kim, D.: Influence of relative density, particle shape, and stress path on the plane strain compression behavior of granular materials. Acta Geotech. 9, 241–255 (2014)
Jitsangiam, P., Nikraz, H.: Coarse bauxite residue for roadway construction materials. Int. J. Pavement Eng. 14(3), 265–273 (2013)
Arnepalli, D.N., Shanthakumar, S., Rao, B.H., Singh, D.N.: Comparison of methods for determining specific-surface area of fine-grained soils. Geotech. Geol. Eng. 26(2), 121–132 (2008)
Snars, K., Gilkes, J.R.: Evaluation of bauxite residue (red mud) of different origin for environmental applications. Appl. Clay Sci. 46(1), 13–20 (2009)
Gräfe, M., Power, G., Klauber, C.: Bauxite residue issues: III. Alkalinity and associated chemistry. Hydrometallurgy 108(1–2), 60–79 (2011)
Alam, S., Das, B.K., Das, S.K.: Dispersion and sedimentation characteristics of red mud. J. Hazard. Toxic Radioact. Waste (2018). https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000420
Li, L.Y.: Properties of red mud tailings produced under varying process conditions. J. Environ. Eng. 124, 254–264 (1998)
Banvolgyi, G.: Opportunities within the alumina refineries to make bauxite residue easy to downstream use. In: Proceedings of the Bauxite Residue Valorization and Best Practices Conferences, Leuven, Belgium, pp. 89−100 (2015)
Li, Y.C., Min, X.B., Ke, Y., Chai, L.Y., Shi, M.Q., Tang, C.J., Wang, Q.W., Liang, Y.J., Lei, J., Liu, D.G.: Utilization of red mud and Pb/Zn smelter waste for the synthesis of a red mud-based cementitious material. J. Hazard. Mater. 344, 343–349 (2017)
Liu, Z., Li, H.: Metallurgical process for valuable elements recovery from red mud—a review. Hydrometallurgy 155, 29–43 (2015)
Feret, F.: Selected Applications of Rietveld-XRD Analysis for Raw Materials of the Aluminium Industry. JCPDS-International Centre for Diffraction Data, Newtown Square (2013)
Pascual, J., Corpas, F.A., Lopez-Beceiro, J.: Thermal characterization of a Spanish red mud. J. Therm. Anal. Calorim. 96, 407–412 (2009)
Patel, S., Pal, B.K., Patel, R.K.: A novel approach in red mud neutralization using cow dung. Environ. Sci. Pollut. Res. 25(1–8), 12841–12848 (2018)
Serjun, V.Z., Mladenovic, A., Milacic, R., Scancar, J., Asler, A., Zupancic, N., Nikolic, I., Oprckal, P.: Red mud as an alternative material for the production of a geotechnical composite. In: 2nd Conference of Bauxite Residue Valorization and Best Practices (BR-2018), 7−10 May, Athens (2018)
Santini, T.C.: Application of the Rietveld refinement method for quantification of mineral concentrations in bauxite residues (alumina refining tailings). Int. J. Miner. Process. 139, 1–10 (2015)
Liu, Y., Lin, C., Wu, Y.: Characterization of red mud derived from a combined Bayer process and bauxite calcination method. J. Hazard. Mater. 146(1–2), 255–261 (2007)
CSIRO: Review of Bauxite Alkalinity and Associated Chemistry. CSIRO Document 3610, p. 60. National Research Flagship, CSIRO, Australian Government (2009)
Castaldi, P., Silvetti, M., Santona, L., Enzo, S., Melis, P.: XRD, FTIR and thermal analysis of bauxite ore-processing waste (red mud) exchanged with heavy metals. Clays Clay Miner. 56(4), 461–469 (2008)
Garau, G., Castaldi, P., Santona, L., Deiana, P., Melis, P.: Influence of red mud, zeolite and lime on heavy metals immobilization culturable heterotrophic microbial populations and enzyme activities in a contaminated soil. Geoderma 142(1–2), 47–57 (2007)
Hu, X., Peng, T., Sun, H., Zhao, E.: Synthetic mechanism of hydroxy sodalite. Kuei Suan Jen Hsueh Pao 44(8), 1200–1206 (2016)
Kumar, S., Prasad, A.: Parameters controlling strength of red mud–lime mix. Eur. J. Environ. Civ. Eng. (2017). https://doi.org/10.1080/19648189.2017.1304280
Singh, M., Upadhyay, S.N., Prasad, P.M.: Preparation of special cements from red mud. Waste Manag. 16(8), 665–670 (1996)
Rubinos, D.A., Barral, M.T.: Fractionation and mobility of metals in bauxite red mud. Environ. Sci. Pollut. Res. 20(11), 7787–7802 (2013)
Pontikes, Y., Angelopoulos, G.N.: Bauxite residue in cement and cementitious applications: current status and a possible way forward. Resour. Conserv. Recycl. 73, 53–63 (2013)
ASTM: Standard Test Method C595/C595M, Standard Specification for Blended Hydraulic Cements. ASTM International, West Conshohocken (2019)
Alam, S., Das, S.K., Rao, B.H.: Stabilization of red mud using low ash coal fly ash. In: Proceedings of Indian Geotechnical Conference. IIT, Guwahati (2017b)
Addai-Mensah, J., Li, J., Zbik, M., Rosencrance, S.: Sodium aluminosilicate solid phase specific fouling behaviour. In: ECI Conference of Heat Exchanger Fouling and Cleaning. Fundamentals and Applications, Santa Fe, New Mexico, USA, Paper 11 (2003)
Peng, H., Seneviratne, D., Vaughan, J.: Role of the amorphous phase during sodium aluminosilicate precipitation. Ind. Eng. Chem. Res. 57, 1408–1416 (2018)
Feret, F.R.: Red mud (bauxite residue). In: International Tables for Crystallography, Volume H, Chapter 7.6, pp. 785–787 (2019)
Dobra, G., Kiselev, A., Filipescu, L., Alistarh, V., Anghelovici, N., Iliev, S.: Full analysis of Sierra Leone bauxite and possibilities of bauxite residue filtration. J. Sib. Fed. Univ. Eng. Technol. 9(5), 643–656 (2016)
Lin, C.: Bauxite residue (red mud) from the Pingguo alumina refined China: characteristics and potential uses. In: Pasamehmtoglu, A.G., Ozgenoglu, A., Yesilay, A.Y. (eds.) Proceedings of International Symposium on Environmental Issues and Waste Management in Energy and Mineral Production, p. 551. Atilim University, Ankara (2004)
Sglavo, V.M., Campostrini, R., Maurina, S., Carturan, G., Monagheddu, M., Budroni, G., Cocco, G.: Bauxite ‘red mud’ in the ceramic industry. Part 1: thermal behaviour. J. Eur. Ceram. Soc. 20(3), 235–244 (2000)
Atasoy, A.: The comparison of the Bayer process wastes on the base of chemical and physical properties. J. Therm. Anal. Calorim. 90(1), 153–158 (2007)
Pera, J., Boumaza, R., Ambroise, J.: Development of a pozzolanic pigment from red mud. Cem. Concr. Res. 27, 1513–1522 (1997)
Liu, X., Zhang, N.: Utilization of red mud in cement production: a review. Waste Manag. Res. 29(10), 1053–1063 (2011)
Ribeiro, D.V., Labrincha, J.A., Morelli, M.R.: Potential use of natural red mud as pozzolan for Portland cement. Mater. Res. 14(1), 60–66 (2011)
Subhashree, S.: Geo-engineering properties of lime treated plastic soils. Master’s Thesis, NIT, Rourkela (2014)
Negussey, D., Wijewickreme, W.K.D., Vaid, Y.P.: Contact volume friction angle of granular materials. Can. Geotech. J. 25(1), 50–55 (1988)
Stark, N., Hay, A.E., Cheel, R., Ake, C.B.: The impact of particle shape on the angle of internal friction and the implications for sediment dynamics at a steep, mixed sand-gravel beach. Earth Surf. Dyn. 2(2), 469–480 (2014)
Jerves, A.X., Kawamoto, R.Y., Andrade, J.E.: Effect of grain morphology on critical state: a computational analysis. Acta Geotech. 11(3), 493–503 (2016)
Kirwan, L., Hartshorn, A., Mcmonagle, J.B., Fleming, L., Funnell, D.: Chemistry of bauxite residue neutralisation and aspects to implementation. Int. J. Miner. Process. (2013). https://doi.org/10.1016/j.minpro.2013.01.001
Kushwaha, S.S., Kishan, D.: Stabilization of red mud by lime and gypsum and investigating its possible use in geoenvironmental engineering. In: Geo-Chicago, pp. 978−988 (2016)
Gore, M.S., Gilbert, R.B., McMillan, I., Parks, S.L.I.: Geotechnical characterization of compacted bauxite residue for use in levees. In: Geo-Chicago, pp. 299−310 (2016)
Pan, S.Y., Chung, T.C., Ho, C.C., Hou, C.J., Chen, Y.H., Chiang, P.C.: CO2 mineralization and utilization using steel slag for establishing a waste-to-resource supply chain. Sci. Rep. 7(1), 17227 (2017)
Bai, Y., Milestone, N.B., Yang, C.: Sodium sulphate activated GGBS/PFA and its potential as a nuclear waste immobilisation matrix. MRS Online Proc. Libr. Arch. (2006). https://doi.org/10.1557/PROC-932-38.1
IRC SP 20: Rural roads manual. In: Indian Road Congress, New Delhi, India (2002)
IRC SP 58: Guidelines for use of fly ash in road embankment. In: Indian Road Congress, New Delhi, India (2001)
Babu, K.S.: Characteristics study of stabilized red mud waste as a resource material for pavement. Master’s Thesis, IIT, Bhubaneswar (2018)
Kutle, A., Nad, K., Obhodas, J., Orescanin, V., Valkovic, V.: Assessment of environmental condition in the waste disposal site of an ex-alumina plant near Obrovac, Croatia. X-Ray Spectr. 33(1), 39–45 (2004)
Bartha, A.: Investigation of toxic and heavy metal content and mobility of the red mud in Ajka (Hungary). In: Presentation at the Colloquium Spectroscopicum Internationale XXXVII (CSI XXXVII), Buzios, Brazil (2011)
Bánvölgyi, G.: The red mud pond dam failure at Ajka (Hungary) and subsequent developments. ICSOBA Newsl. 7, 14–23 (2012)
Hua, Y., Heal, K.V., Friesl-Hanl, W.: The use of red mud as an immobilizer for metal/metalloid-contaminated soil: a review. J. Hazard. Mater. 325, 17–30 (2017)
Tuazon, D., Corder, G.D.: Life cycle assessment of seawater neutralized red mud for treatment of acid mine drainage. Resour. Conserv. Recycl. 52(11), 1307–1314 (2008)
Palmer, S.J., Frost, R.L.: Characterization of bauxite and seawater neutralized bauxite residue using XRD and vibrational spectroscopic techniques. J. Mater. Sci. 44(1), 55–63 (2009)
Khaitan, S., Dzombak, D.A., Lowry, G.V.: Neutralization of bauxite residue with acidic fly ash. Environ. Eng. Sci. 26(2), 431–440 (2009)
Khaitan, S., Dzombak, D.A., Swallow, P., Schmidt, K., Fu, J., Lowry, G.V.: Field evaluation of bauxite residue neutralization by carbon dioxide, vegetation, and organic amendments. J. Environ. Eng. 136(10), 1045–1053 (2010)
Cusack, P.B., Healy, M.G., Ryan, P.C., Burke, I.T., O’Donoghue, L.M.T., Ujaczki, E., Courtney, R.: Enhancement of bauxite residue as a low-cost adsorbent for phosphorus in aqueous solution, using seawater and gypsum treatments. J. Clean. Prod. 179, 217–224 (2018)
Barrow, N.J.: Possibility of using caustic residue from bauxite for improving the chemical and physical properties of sandy soil. Aust. J. Agric. Res. 33, 285–295 (1982)
Courtney, R., Mullen, G., Harrington, T.: An evaluation of revegetation success on bauxite residue. Restor. Ecol. 17(3), 350–358 (2009)
Clark, M.W., Johnston, M., Reichelt-Brushett, A.J.: Comparison of several different neutralisations to a bauxite refinery residue: potential effectiveness environmental ameliorants. Appl. Geochem. 56, 1–10 (2015)
Abel, J.S., Stangle, G.C.: Sedimentation in flocculating colloidal suspensions. J. Mater. Res. 9(2), 451–461 (1994)
Martinez, E.L.: Investigation of sedimentation behaviour of microcrystalline cellulose. Master’s Thesis, Chalmers University of Technology (2012)
USEPA/600/4-90/027F: Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms. USEPA (1993)
USEPA: Health Effects Assessment Summary Tables (HEAST). U.S. Environmental Protection Agency, Washington, DC (1997)
USEPA: Drinking Water Standards and Health Advisories EPA 822-F-18. USEPA, Washington, DC (2018)
Kolencsik-Tóth, A., Gonda, N., Fekete, Z., Tóth, M., Székely, I., Zákányi, B., Móricz, F., Kovács, B.: Physical and chemical characterization of red mud in terms of its environmental effects. Geosci. Eng. 3(5), 129–137 (2014)
Qu, Y., Lian, B., Mo, B., Liu, C.: Bioleaching of heavy metals from red mud using Aspergillus niger. Hydrometallurgy 136, 71–77 (2013)
Mohapatra, B.K., Rao, M.B.S., Rao, R.B., Paul, A.K.: Characteristics of red mud generated at NALCO Refinery, Damanjodi, India. In: Light Metals, Proceedings of Sessions, TMS Annual Meeting, Warrendale, Pennsylvania, USA (2000)
Li, J., Feng, S., Chen, H., Wang, H.: Chemical and geotechnical properties of red mud at Liulin, China. In: Proceedings of GeoShanghai, pp. 405–414 (2018)
Chandra, K.S., Krishnaiah, S.: A detailed geotechnical investigation on red mud and chemical analysis of its leachate. In: Indian Geotechnical Conference, p 10. SVNIT, Surat (2019)
Urík, M., Bujdoš, M., Milová-Žiaková, B., Mikušová, P., Slovák, M., Matúš, P.: Aluminium leaching from red mud by filamentous fungi. J. Inorg. Biochem. 152, 154–159 (2015)
Ghosh, I., Guha, S., Balasubramaniam, R., Kumar, A.R.: Leaching of metals from fresh and sintered red mud. J. Hazard. Mater. 185(2–3), 662–668 (2011)
Zhang, J., Liu, S., Yao, Z., Wu, S., Jiang, H., Liang, M., Qiao, Y.: Environmental aspects and pavement properties of red mud waste as the replacement of mineral filler in asphalt mixture. Constr. Build. Mater. 180, 605–613 (2018)
Kim, S.Y., Jun, Y., Jeon, D., Oh, J.E.: Synthesis of structural binder for red brick production based on red mud and fly ash activated using Ca(OH)2 and Na2CO3. Constr. Build. Mater. 147, 101–116 (2017)
Gray, D.H., Somogyi, F.: Engineering Properties and Dewatering Characteristics of Red Mud Tailing. DRDA Project 340364, Ann Arbor (1974)
Hussain, M., Dash, S.K.: Influence of lime on plasticity behaviour of soils. In: Proceedings of Indian Geotechnical Conference, GEOtrendz, 16–18 December. IIT, Bombay (2010)
Li, Y.C., Min, X.B., Ke, Y., Chai, L.Y., Shi, M.Q., Tang, C.J., Wang, Q.W., Liang, Y.J., Lei, J., Liu, D.G.: Utilization of red mud and Pb/Zn smelter waste for the synthesis of a red mud-based cementitious material. J. Hazard. Mater. 344, 343–349 (2018)
Gore, M.S.: Geotechnical characterization of bauxite residue (red mud), Doctoral Thesis, The University of Texas, Austin (2015)
Grimshaw, R.W.: The Chemistry and Physics of Clays and Other Ceramic Materials. Wiley, New York (1980)
Kola, N., Das, S.K.: Lateral earth pressure due to red mud using numerical analysis. In: Proceedings of Indian Geotechnical Conference, 22–24 December, Roorkee, India, p 4 (2013)
Hildebrando, E.A., Souza, J.A.D.S., Angelica, R.S., Neves, R.D.F.: Application of bauxite waste from Amazon region in the heavy clay industry. Mater. Res. 16(6), 1418–1422 (2013)
Chen, F.H.: Foundations on Expansive Soils. Elsevier Scientific Publishing Company, Amsterdam (1988)
Reddy, P.V.S., Rao, K.M., Rani, C.H.S.: Identification of expansive soils and assessment of expansion potential by fuzzy approach. Electron. J. Geotech. Eng. 14, 1–10 (2009)
Pinnock, W.R., Gordon, J.N.: Assessment of strength development in Bayer-process residues. J. Mater. Sci. 27(3), 692–696 (1992)
Daniel, D.E.: Geotechnical Practice for Waste Disposal. Chapman and Hall, London (1993)
Kaniraj, S.R., Havanagi, V.G.: Correlation analysis of laboratory compaction of fly ashes. Pract. Period. Hazard. Toxic Radioact. Waste Manag. 5(1), 25–32 (2001)
Garg, A., Huang, H., Kushvaha, V., et al.: Mechanism of biochar soil pore–gas–water interaction: gas properties of biochar-amended sandy soil at different degrees of compaction using KNN modeling. Acta Geophys. 68, 207–217 (2019)
IRC: 37: Guidelines for the design of flexible pavements. In: Indian Road Congress, New Delhi, India (2012)
Reddy, N.G., Singh, N.R., Rao, B.H.: Application of biopolymers for improving strength characteristics of red mud waste. Environ. Geotech. (2020). https://doi.org/10.1680/jenge.19.00018
Jain, S.: Red mud as a construction material by using bioremediation. Master’s Thesis, NIT Rourkela (2014)
Vogt, M.F.: Development studies on dewatering of red mud. In: Proceedings of 103rd Annual Meeting of AIME, Dallas, Texas, pp. 73–91(1974)
Arora, K.R.: Soil Mechanics and Foundation Engineering. Standard Publishers Distributors, New Delhi (2004)
Srivastava, R.K.: Geotechnical aspects of soil–industrial waste interaction behavior. In: Proceedings of the International Symposium on Engineering Geology and the Environment, Athens, Greece, vol 2, pp. 23–27 (1997)
USEPA 440/5-86-001: Quality Criteria for Water. Office of Water Regulations and Standards, Washington, DC (1986)
Somogyi, F., Gray, D.H.: Engineering properties affecting disposal of red mud. In: Proceedings of Conference on Geotechnical Practice for Disposal of Solid Waste Materials, pp. 1−22. ASCE, Ann Arbor (1977)
Nikraz, H.R., Bodley, A.J., Cooling, D.J., Kong, P.Y.L., Soomro, M.: Comparison of physical properties between treated and untreated bauxite residue mud. J. Mater. Civ. Eng. 19(1), 2–9 (2007)
Deelwal, K., Dharavath, K., Kulshreshtha, M.: Evaluation of characteristic properties of red mud for possible use as a geotechnical material in civil construction. Int. J. Adv. Eng. Technol. 7(3), 1053–1059 (2014)
Mukiza, E., Zhang, L., Liu, X., Zhang, N.: Utilization of red mud in road base and sub grade materials: a review. Resour. Conserv. Recycl. 141, 187–199 (2019)
Deelwal, K., Dharavath, K., Kulshreshtha, M.: Stabilization of red mud by lime, gypsum and investigating its possible use as a geotechnical material in the civil construction. Int. J. Adv. Eng. Technol. 7(4), 1238–1244 (2014)
Umesh, T., Dinesh, S., Sivapullaiah, P.V.: Characterization of dispersive soils. Mater. Sci. Appl. 2, 629–633 (2011)
Hardie, M.: Dispersive Soils and Their Management: A Technical Reference Manual, p. 41. Department Primary Industries and Water (2009)
Chen, R., Zhang, L., Budhu, M.: Biopolymer stabilization of mine tailings. J. Geotech. Geoenviron. Eng. 139(10), 1802–1807 (2013)
Rout, S.K., Sahoo, T., Das, S.K.: Utility of red mud as an embankment material. Int. J. Earth Sci. Eng. 5(6), 1645–1651 (2012)
Houston, S.L., Houston, W.N., Zapata, C.E., Lawrence, C.: Geotechnical engineering practice for collapsible soils. Geotech. Geol. Eng. 19(3–4), 333–355 (2001)
Kalantari, B.: Foundations on collapsible soils: a review. Forensic Eng. 166(FE2), 57–63 (2013)
ASTM: Standard Test Method D5333, Measurement of Collapse Potential of Soils. ASTM International, West Conshohocken (2003)
Main Roads Western Australia: Specification 501 Pavements Document 04/10110-04 (2012)
Taha, M.R., Kabir, M.H.: Tropical residual soil as compacted soil liners. Eng. Geol. 47(3), 375–381 (2005)
Kajita, L.S.: An improved contaminant resistant clay for environmental clay liner applications. Clay Clay Miner. 45(5), 609–617 (1997)
Zhu, L.L., Kexin, M., Zipeng, X.: Fluoride removal from liquid phase by Fe–Al–La trimetal hydroxides adsorbent prepared by iron and aluminum leaching from red mud. J. Mol. Liq. 237, 164–172 (2017)
Mitchell, J., Hooper, D., Campanella, R.: Permeability of compacted clay. J. Soil Mech. Found. Div. 91, 41–66 (1965)
IRC 36: Recommended practice for the construction of earth embankments for road works. In: Indian Road Congress, New Delhi, India (1970)
MoRTH: Specifications for road and bridge works, 3rd revision. In: Indian Road Congress, New Delhi, India (2000)
BS 3921: Specification for Clay Bricks. London (1985)
Sahoo, S.S., Mohanty, C.: Construction of road sub-base by using industrial waste. Int. J. Eng. Sci. Manag. Res. 3, 77–83 (2016)
Rao, C.H.V.H., Naidu, P.G., Satyanyarana, P.V.V., Adiseshu, S.: Application of GGBS stabilized red mud in road construction. IOSR J. Eng. 2(8), 14–20 (2012)
Zhu, X., Li, W., Guan, X.: An active dealkalization of red mud with roasting and water leaching. J. Hazard. Mater. 286, 85–91 (2015)
Rivera, R.M., Ounoughene, G., Borra, C.R., Binnemans, K., Van Gerven, T.: Neutralisation of bauxite residue by carbon dioxide prior to acidic leaching for metal recovery. Miner. Eng. 112, 92–102 (2017)
Li, H., Wen, Y., Cao, A., Huang, J., Zhou, Q., Somasundaran, P.: The influence of additives (Ca2+, Al3+, and Fe3+) on the interaction energy and loosely bound extracellular polymeric substances (EPS) of activated sludge and their flocculation mechanisms. Bioresour. Technol. 114, 188–194 (2012)
Deihimi, N., Irannajad, M., Rezai, B.: Characterization studies of red mud modification processes as adsorbent for enhancing ferricyanide removal. J. Environ. Manag. 206, 266–275 (2018)
Chen, S., Fang, L., Zhu, Q., Li, L., Xing, Z.: Bromate removal by Fe(II)-akaganeite (β-FeOOH) modified red mud granule material. RSC Adv. 6(34), 28257–28262 (2016)
López, E., Soto, B., Arias, M., Nú Ez, A., Rubinos, D., Barral, M.T.: Adsorbent properties of red mud and its use for wastewater treatment. Water Res. 32, 1314–1322 (1998)
Nadaroglu, H., Kalkan, E., Demir, N.: Removal of copper from aqueous solution using red mud. Desalination 251, 90–95 (2010)
Chaddha, M.J., Rai, S., Goyal, R.N.: National Seminar on Environmental Concern and Remedies in Alumina Industry at NALCO, Damanjodi, India (2007)
Sahu, R.C., Patel, R.K., Ray, B.C.: Neutralization of red mud using CO2 sequestration cycle. J. Hazard. Mater. 179, 28–34 (2010)
Meher, S.N., Rout, A.K., Padhi, B.K.: Recovery of Al and Na values from red mud by BaO–Na2CO3 sinter process. Eur. J. Chem. 8, 1387–1393 (2011)
Mišík, M., Burke, I.T., Reismüller, M., Pichler, C., Rainer, B., Mišíková, K., Mayes, W.M., Knasmueller, S.: Red mud a byproduct of aluminum production contains soluble vanadium that causes genotoxic and cytotoxic effects in higher plants. Sci. Total Environ. 493, 883–890 (2014)
Burke, I.T., Mayes, W.M., Peacock, C.L., Brown, A.P., Jarvis, A.P., Gruiz, K.: Speciation of arsenic, chromium, and vanadium in red mud samples from the Ajka Spill Site, Hungary. Environ. Sci. Technol. 46(6), 3085–3092 (2012)
Di Carlo, E., Boullemant, A., Courtney, R.: A field assessment of bauxite residue rehabilitation strategies. Sci. Total Environ. 663, 915–926 (2019)
Gruiz, K., Feigl, V., Klebercz, O., Anton, A., Vaszita, E.: Environmental risk assessment of red mud contaminated land in Hungary. In: GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, pp. 4156−4165 (2012)
Higgins, D., Curtin, T., Pawlett, M., Courtney, R.: The potential for constructed wetlands to treat alkaline bauxite-residue leachate: Phragmites australis growth. Environ. Sci. Pollut. Res. 23(23), 24305–24315 (2016)
NSF/ANSI 61: Drinking Water System Components-Health Effects (2016)
Parekh, B.K., Goldberger, W.M.: An Assessment of Technology for Possible Utilization in Bayer Process Muds. EPA-600/2-76-301, p. 154 (1976)
IS 1498: Classification and Identification of Soils for General Engineering Purposes. Bureau of Indian Standards, New Delhi (2007)
IRC: SP: 72: Guidelines for the design of flexible pavement for low volume rural roads. In: Indian Road Congress, New Delhi, India (2007)
IS 1498: Classification and Identification of Soils for General Engineering Purposes. Bureau of Indian Standards, New Delhi (1997)
MoRD: Specifications for Rural Roads. Ministry of Rural Development, Government of India, New Delhi (2014)
IRC: 36: Recommended Practice for Construction of Earth Embankments and Subgrade for Road Works, Indian Road Congress, New Delhi, India (2010)
Bhumij, R.K.: Compaction characteristics of red mud and pond ash mix as filling and embankment material. Doctoral Dissertation (2015)
Jitsangiam, P., Chummuneerat, S., Nikraz, H.: Engineering characteristics of cement modified base course material for Western Australian pavements. Aust. J. Civ. Eng. 11(1), 13–21 (2013)
Liu, S., Li, Z., Li, Y., Cao, W.: Strength properties of Bayer red mud stabilized by lime-fly ash using orthogonal experiments. Constr. Build. Mater. 166, 554–563 (2018)
Consoli, N.C.: Comparison of the measured and predicted performance of tailings sedimentation. Proc. Inst. Civ. Eng. Geotech. Eng. 125, 179–187 (1997)
Somogyi, F.: Dewatering and drainage of red mud tailings. Doctoral Dissertation, University of Michigan (1976)
Kehagia, F.O.: Construction of an unpaved road using industrial by-products (bauxite residue). WSEAS Trans. Environ. Dev. 10, 2224–3496 (2014)
Kirkpatrick, D.B.: Red Mud Product Development. Minerals, Metals and Materials Society, Warrendale (1996)