Properties and Applications of Polyvinyl Alcohol, Halloysite Nanotubes and Their Nanocomposites

Springer Science and Business Media LLC - Tập 20 Số 12 - Trang 22833-22847
Tayser Sumer Gaaz1,2, Abu Bakar Sulong2, Majid Niaz Akhtar2,3, Abdul Amir H. Kadhum4, Wan Ramli Wan Daud4,5, Ahmed A. Al‐Amiery4
1Department of Machinery Equipment Engineering Techniques, Technical College Al-Musaib, Al-Furat Al-Awsat Technical University, Al-Musaib, Babil 51009, Iraq
2Department of Mechanical & Materials Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia
3Department of Physics, COMSATS Institute of Information Technology, Lahore 54000, Pakistan
4Department of Chemical & Process Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia
5Fuel Cell Institute, University Kebangsaan Malaysia (UKM), Bangi, Selangor 43000, Malaysia

Tóm tắt

The aim of this review was to analyze/investigate the synthesis, properties, and applications of polyvinyl alcohol–halloysite nanotubes (PVA–HNT), and their nanocomposites. Different polymers with versatile properties are attractive because of their introduction and potential uses in many fields. Synthetic polymers, such as PVA, natural polymers like alginate, starch, chitosan, or any material with these components have prominent status as important and degradable materials with biocompatibility properties. These materials have been developed in the 1980s and are remarkable because of their recyclability and consideration of the natural continuation of their physical and chemical properties. The fabrication of PVA–HNT nanocomposites can be a potential way to address some of PVA’s limitations. Such nanocomposites have excellent mechanical properties and thermal stability. PVA–HNT nanocomposites have been reported earlier, but without proper HNT individualization and PVA modifications. The properties of PVA–HNT for medicinal and biomedical use are attracting an increasing amount of attention for medical applications, such as wound dressings, drug delivery, targeted-tissue transportation systems, and soft biomaterial implants. The demand for alternative polymeric medical devices has also increased substantially around the world. This paper reviews individualized HNT addition along with crosslinking of PVA for various biomedical applications that have been previously reported in literature, thereby showing the attainability, modification of characteristics, and goals underlying the blending process with PVA.

Từ khóa


Tài liệu tham khảo

Razzak, 2001, Irradiation of polyvinyl alcohol and polyvinyl pyrrolidone blended hydrogel for wound dressing, Radiat. Phys. Chem., 62, 107, 10.1016/S0969-806X(01)00427-3

Demerlis, 2003, Review of the oral toxicity of polyvinyl alcohol (PVA), Food Chem. Toxicol., 41, 319, 10.1016/S0278-6915(02)00258-2

Liu, 2007, Drying induced aggregation of halloysite nanotubes in polyvinyl alcohol/halloysite nanotubes solution and its effect on properties of composite film, Appl. Phys. A Mater. Sci. Process., 88, 391, 10.1007/s00339-007-3995-8

Limpan, 2012, Influences of degree of hydrolysis and molecular weight of poly (vinyl alcohol)(PVA) on properties of fish myofibrillar protein/PVA blend films, Food Hydrocoll., 29, 226, 10.1016/j.foodhyd.2012.03.007

Maria, 2008, The effect of the degree of hydrolysis of the PVA and the plasticizer concentration on the color, opacity, and thermal and mechanical properties of films based on PVA and gelatin blends, J. Food Eng., 87, 191, 10.1016/j.jfoodeng.2007.11.026

Qiu, 2013, A Composting Study of Membrane-Like Polyvinyl Alcohol Based Resins and Nanocomposites, J. Polym. Environ., 21, 658, 10.1007/s10924-013-0584-0

Tang, 2013, Novel polyvinyl alcohol/styrene butadiene rubber latex/carboxymethyl cellulose nanocomposites reinforced with modified halloysite nanotubes, J. Nanomater., 2013, 128, 10.1155/2013/542421

Qiu, 2012, Fabrication and characterization of biodegradable composites based on microfibrillated cellulose and polyvinyl alcohol, Compos. Sci. Technol., 72, 1588, 10.1016/j.compscitech.2012.06.010

Qiu, 2013, Halloysite nanotube reinforced biodegradable nanocomposites using noncrosslinked and malonic acid crosslinked polyvinyl alcohol, Polym. Compos., 34, 799, 10.1002/pc.22482

Cho, 2012, Mechanical properties and biodegradability of electrospun soy protein Isolate/PVA hybrid nanofibers, Polym. Degrad. Stab., 97, 747, 10.1016/j.polymdegradstab.2012.02.007

Luo, 2003, A study of physical and mechanical properties of poly (hydroxybutyrate-co-hydroxyvalerate) during composting, Polym. Degrad. Stab., 80, 59, 10.1016/S0141-3910(02)00383-X

Chiellini, 2003, Biodegradation of poly (vinyl alcohol) based materials, Prog. Polym. Sci., 28, 963, 10.1016/S0079-6700(02)00149-1

Solaro, 2000, Biodegradation of poly (vinyl alcohol) with different molecular weights and degree of hydrolysis, Polym Adv. Technol., 11, 873, 10.1002/1099-1581(200008/12)11:8/12<873::AID-PAT35>3.0.CO;2-V

Vijayalakshmi, 2006, Effects of the pH, concentration, and solvents on the ultrasonic degradation of poly (vinyl alcohol), J. Appl. Polym. Sci., 100, 4888, 10.1002/app.23280

Corti, 2002, Biodegradation of poly (vinyl alcohol) in selected mixed microbial culture and relevant culture filtrate, Polym. Degrad. Stab., 75, 447, 10.1016/S0141-3910(01)00247-6

Chiellini, 1999, Biodegradation of poly (vinyl alcohol) based blown films under different environmental conditions, Polym. Degrad. Stab., 64, 305, 10.1016/S0141-3910(98)00206-7

Jayasekara, 2003, Biodegradation by composting of surface modified starch and PVA blended films, J. Polym. Environ., 11, 49, 10.1023/A:1024219821633

Matsumura, 1994, Novel malonate-type copolymers containing vinyl alcohol blocks as biodegradable segments and their builder performance in detergent formulations, J. Environ. Polym. Degrad., 2, 89, 10.1007/BF02074777

Ashori, 2005, Effect of chitosan addition on the surface properties of kenaf (Hibiscus cannabinus) paper, Fibers Polym., 6, 174, 10.1007/BF02875611

Zainuddin, 2001, An ESR study on γ-irradiated poly (vinyl alcohol), Rad. Phys. Chem., 62, 283, 10.1016/S0969-806X(01)00188-8

Pal, 2007, Preparation and characterization of polyvinyl alcohol-gelatin hydrogel membranes for biomedical applications, Am. Assoc. Pharm. Sci. PharmSciTech, 8, E142

Horii, 1992, Cross polarization/magic angle spinning 13C-NMR study of solid structure and hydrogen bonding of poly (vinyl alcohol) films with different tacticities, Polymer, 33, 2299, 10.1016/0032-3861(92)90520-7

Albdiry, 2013, Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes, Mater. Des., 48, 68, 10.1016/j.matdes.2012.08.035

Peppas, 1977, Development of semicrystalline poly (vinyl alcohol) hydrogels for biomedical applications, J. Biomed. Mater. Res., 11, 423, 10.1002/jbm.820110309

Paradossi, 2003, Poly (vinyl alcohol) as versatile biomaterial for potential biomedical applications, J. Mater. Sci. Mater. Med., 14, 687, 10.1023/A:1024907615244

Baker, 2012, A review of polyvinyl alcohol and its uses in cartilage and orthopedic applications, J. Biomed. Mater. Res. B Appl. Biomater., 100, 1451, 10.1002/jbm.b.32694

Vergaro, 2010, Cytocompatibility and uptake of halloysite clay nanotubes, Biomacromolecules, 11, 820, 10.1021/bm9014446

Lee, 2010, Steric stabilization of thermally responsive N-isopropylacrylamide particles by poly (vinyl alcohol), Langmuir, 26, 18055, 10.1021/la1039128

Tan, 2007, The effect of protein structural conformation on nanoparticle molecular imprinting of ribonuclease a using miniemulsion polymerization, Langmuir, 23, 2722, 10.1021/la062178q

Yang, 2004, Evaluation of chitosan/PVA blended hydrogel membranes, J. Membr. Sci., 236, 39, 10.1016/j.memsci.2004.02.005

Guo, 2010, Effects of iron oxide nanoparticles on polyvinyl alcohol: Interfacial layer and bulk nanocomposites thin film, J. Nanopart. Res., 12, 2415, 10.1007/s11051-009-9802-z

Kenawy, 2014, Physically crosslinked poly (vinyl alcohol)-hydroxyethyl starch blend hydrogel membranes: Synthesis and characterization for biomedical applications, Arab. J. Chem., 7, 372, 10.1016/j.arabjc.2013.05.026

Kamoun, 2015, Crosslinked poly (vinyl alcohol) hydrogels for wound dressing applications: A review of remarkably blended polymers, Arab. J. Chem., 8, 1, 10.1016/j.arabjc.2014.07.005

Zhao, 2003, Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation, Carbohydr. Polym., 53, 439, 10.1016/S0144-8617(03)00103-6

Muggli, 1999, Crosslinked polyanhydrides for use in orthopedic applications: Degradation behavior and mechanics, J. Biomed. Mater. Res., 46, 271, 10.1002/(SICI)1097-4636(199908)46:2<271::AID-JBM17>3.0.CO;2-X

Hyon, 1994, Poly (vinyl alcohol) hydrogels as soft contact lens material, J. Biomater. Sci. Polym. Ed., 5, 397, 10.1163/156856294X00103

Kaity, 2013, Interpenetrating polymer network of locust bean gum-poly (vinyl alcohol) for controlled release drug delivery, Carbohydr. Polym., 94, 456, 10.1016/j.carbpol.2013.01.070

Lee, 2011, Strategies for hydrogen bonding based layer-by-layer assembly of poly (vinyl alcohol) with weak polyacids, Macromolecules, 45, 347, 10.1021/ma202092w

Ghebaur, 2012, New polymer–halloysite hybrid materials—potential controlled drug release system, Int. J. Pharm., 436, 568, 10.1016/j.ijpharm.2012.07.014

Han, 2011, Preparation of chitosan/graphene oxide composite film with enhanced mechanical strength in the wet state, Carbohydr. Polym., 83, 653, 10.1016/j.carbpol.2010.08.038

Mutsuo, 2011, Release behavior from hydrogen-bonded polymer gels prepared by pressurization, J. Appl. Polym. Sci., 119, 2725, 10.1002/app.31622

Shuai, 2013, Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering, Biofabrication, 5, 015014, 10.1088/1758-5082/5/1/015014

Ng, 2012, A novel macroporous polyvinyl alcohol scaffold promotes chondrocyte migration and interface formation in an in vitro cartilage defect model, Tissue Eng. A, 18, 1273, 10.1089/ten.tea.2011.0276

Lin, 2011, High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant, J. Coll. Interface Sci., 358, 423, 10.1016/j.jcis.2011.03.009

Stasio, 2011, Highly Polarized Emission from Oriented Films Incorporating Water-Soluble Conjugated Polymers in a Polyvinyl Alcohol Matrix, Adv. Mater., 23, 1855, 10.1002/adma.201004356

Du, 2008, Carboxylated butadiene–styrene rubber/halloysite nanotube nanocomposites: Interfacial interaction and performance, Polymer, 49, 4871, 10.1016/j.polymer.2008.08.042

Swapna, V.P., Selvin, T.P., Suresh, K.I., Saranya, V., Rahana, M.P., and Ranimol, S. (2015). Thermal properties of poly (vinyl alcohol)(PVA)/halloysite nanotubes reinforced nanocomposites. Int. J. Plast. Technol.

Silva, 2002, Elaboration of a membrane with bipolar behaviour using the semi-interpenetrating polymer networks technique, Polymer, 43, 5311, 10.1016/S0032-3861(02)00361-0

Wang, 2011, Preparation of graphene/poly (vinyl alcohol) nanocomposites with enhanced mechanical properties and water resistance, Polym. Int., 60, 816, 10.1002/pi.3025

Gopishetty, 2012, Biocompatible stimuli-responsive hydrogel porous membranes via phase separation of a polyvinyl alcohol and Na-alginate intermolecular complex, J. Mater. Chem., 22, 19482, 10.1039/c2jm31778h

Ravindra, 2012, Halloysite Nanotubes and Applications: A Review, J. Adv. Sci. Res., 3, 25

Lvov, 2013, Functional polymer-clay nanotube composites with sustained release of chemical agents, Prog. Polym. Sci., 38, 1690, 10.1016/j.progpolymsci.2013.05.009

Zhou, 2010, Poly (vinyl alcohol)/halloysite nanotubes bionanocomposite films: Properties and in vitro osteoblasts and fibroblasts response, J. Biomed. Mater. Res. A, 93, 1574, 10.1002/jbm.a.32656

Song, 2013, Structural polymer-based carbon nanotube composite fibers: Understanding the processing–structure–performance relationship, Materials, 6, 2543, 10.3390/ma6062543

Joussein, 2005, Halloysite clay minerals—A review, Clay Miner., 40, 383, 10.1180/0009855054040180

Chen, 1994, Transport and hydrolysis of urea in a reactor–separator combining an anion-exchange membrane and immobilized urease, J. Chem. Technol. Biotechnol., 61, 351, 10.1002/jctb.280610411

Li, 1998, Poly (vinyl alcohol) nanoparticles prepared by freezing-thawing process for protein/peptide drug delivery, J. Controll. Release, 56, 117, 10.1016/S0168-3659(98)00089-3

Yoshii, 1999, Electron beam crosslinked PEO and PEO/PVA hydrogels for wound dressing, Radiat. Phys. Chem., 55, 133, 10.1016/S0969-806X(98)00318-1

Yoshii, 1995, Heat resistance poly (vinyl alcohol) hydrogel, Radiat. Phys. Chem., 46, 169, 10.1016/0969-806X(95)00008-L

Salunkhe, 2013, Polyvinyl alcohol functionalized cobalt ferrite nanoparticles for biomedical applications, Appl. Surface Sci., 264, 598, 10.1016/j.apsusc.2012.10.073

Lee, 1996, Preparation of ultrafine Fe3O4 particles by precipitation in the presence of PVA at high pH, J. Coll. Interface Sci., 177, 490, 10.1006/jcis.1996.0062

Kayal, 2010, Doxorubicin loaded PVA coated iron oxide nanoparticles for targeted drug delivery, Mater. Sci. Eng. C, 30, 484, 10.1016/j.msec.2010.01.006

Chu, 2007, The effects of pH, molecular weight and degree of hydrolysis of poly (vinyl alcohol) on slot die coating of PVA suspensions of TiO2 and SiO2, Coll. Surfaces A Physicochem. Eng. Asp., 302, 1, 10.1016/j.colsurfa.2007.01.041

Sirousazar, 2011, Dehydration kinetics of polyvinyl alcohol nanocomposite hydrogels containing Na-montmorillonite nanoclay, Sci. Iran., 18, 780

Sirousazar, 2011, In vivo and cytotoxic assays of a poly (vinyl alcohol)/clay nanocomposite hydrogel wound dressing, J. Biomater. Sci. Polym. Ed., 22, 1023, 10.1163/092050610X497881

Fujii, 2014, Sulfuric acid treatment of halloysite nanoclay to improve the mechanical properties of PVA/halloysite transparent composite films, Compos. Interfaces, 21, 319, 10.1080/15685543.2014.876307

Jang, 2003, Plasticizer effect on the melting and crystallization behavior of polyvinyl alcohol, Polymer, 44, 8139, 10.1016/j.polymer.2003.10.015

Fernandes, 2013, Bionanocomposites from lignocellulosic resources: Properties, applications and future trends for their use in the biomedical field, Prog. Polym. Sci., 38, 1415, 10.1016/j.progpolymsci.2013.05.013

Jayasekara, 2004, Preparation, surface modification and characterisation of solution cast starch PVA blended films, Polym. Test., 23, 17, 10.1016/S0142-9418(03)00049-7

Heuschmid, 2013, Polyethylene glycol-polyvinyl alcohol grafted copolymer: Study of the bioavailability after oral administration to rats, Food Chem. Toxicol., 51, S3, 10.1016/j.fct.2012.12.032

Eslahi, 2014, Synthesis, characterization and antibacterial properties of a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag, Arab. J. Chem., 7, 846, 10.1016/j.arabjc.2013.11.011

He, 2012, Modified natural halloysite/potato starch composite films, Carbohydr. Polym., 87, 2706, 10.1016/j.carbpol.2011.11.057

Spiridon, 2008, Enzymatic degradation of some nanocomposites of poly (vinyl alcohol) with starch, Polym. Degrad. Stab., 93, 1884, 10.1016/j.polymdegradstab.2008.07.017

Liu, 2014, Recent advance in research on halloysite nanotubes-polymer nanocomposite, Prog. Polym. Sci., 39, 1498, 10.1016/j.progpolymsci.2014.04.004

Dong, 2011, Development and characterisation of novel electrospun polylactic acid/tubular clay nanocomposites, J. Mater. Sci., 46, 6148, 10.1007/s10853-011-5605-6

Chang, 2011, Amylose wrapped halloysite nanotubes, Carbohydr. Polym., 84, 1426, 10.1016/j.carbpol.2011.01.038

Atabey, 2013, Fluorescent electrospun polyvinyl alcohol/CdSe@ZnS nanocomposite fibers, J. Compos. Mater., 47, 3175, 10.1177/0021998312463107

Pandele, 2014, Synthesis, characterization, and in vitro studies of graphene oxide/chitosan–polyvinyl alcohol films, Carbohydr. Polym., 102, 813, 10.1016/j.carbpol.2013.10.085

Zhao, 2013, Hemocompatibility of electrospun halloysite nanotube-and carbon nanotube-doped composite poly (lactic-co-glycolic acid) nanofibers, J. Appl. Polym. Sci., 127, 4825, 10.1002/app.38054

Sakurada, I. (1985). Polyvinyl Alcohol Fiber, Marcel Dekker, Inc.

Dong, 2013, Multi-response analysis in the material characterisation of electrospun poly (lactic acid)/halloysite nanotube composite fibres based on Taguchi design of experiments: Fibre diameter, non-intercalation and nucleation effects, Appl. Phys. A, 112, 747, 10.1007/s00339-013-7789-x

Qi, 2012, Biocompatibility of electrospun halloysite nanotube-doped poly (lactic-co-glycolic acid) composite nanofibers, J. Biomater. Sci. Polym. Ed., 23, 299, 10.1163/092050610X550340

Wu, S., Zheng, G., Guan, X., Yan, X., Guo, J., Dai, K., Liu, C., Shen, C., and Guo, Z. (2015). Mechanically Strengthened Polyamide 66 Nanofibers Bundles via Compositing With Polyvinyl Alcohol. Macromol. Mater. Eng.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Tập 20 Số 12

22833-22847

Thông tin tác giả