Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

Chua, 2015 Thompson, 2015, An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics, Addit. Manuf., 8, 36 Boegelein, 2015, Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting, Acta Mater., 87, 201, 10.1016/j.actamat.2014.12.047 Casalino, 2015, Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel, Opt Laser. Technol., 65, 151, 10.1016/j.optlastec.2014.07.021 Kruth, 2005, Rapid manufacturing of dental prostheses by means of selective laser sintering/melting, Proc AFPR, S4 Tan, 2021, Progress and perspectives in laser additive manufacturing of key aeroengine materials, Int. J. Mach. Tool Manufact., 170, 10.1016/j.ijmachtools.2021.103804 Gu, 2021, Material-structure-performance integrated laser-metal additive manufacturing, Science, 372, 10.1126/science.abg1487 Schleifenbaum, 2011, Direct photonic production: towards high speed additive manufacturing of individual goods, Prod. Eng. Res. Dev., 5, 359, 10.1007/s11740-011-0331-0 Schleifenbaum, 2010, Individualized production by means of high-power selective laser melting, Cirp. J. Manuf. Sci. Technol., 2, 161, 10.1016/j.cirpj.2010.03.005 Gu, 2012, Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium, Acta Mater., 60, 3849, 10.1016/j.actamat.2012.04.006 Li, 2017, Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility, Acta Mater., 129, 183, 10.1016/j.actamat.2017.02.062 Jung, 2015, Fabrication of Fe-based bulk metallic glass by selective laser melting: a parameter study, Mater. Des., 86, 703, 10.1016/j.matdes.2015.07.145 Pauly, 2013, Processing metallic glasses by selective laser melting, Mater. Today, 16, 37, 10.1016/j.mattod.2013.01.018 Gu, 2019, On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting, Int. J. Mach. Tool Manufact., 137, 67, 10.1016/j.ijmachtools.2018.10.006 Strantza, 2019, Directional and oscillating residual stress on the mesoscale in additively manufactured Ti-6Al-4V, Acta Mater., 168, 299, 10.1016/j.actamat.2019.01.050 Moussaoui, 2018, Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties, Mater. Sci. Eng., 735, 182, 10.1016/j.msea.2018.08.037 Harrison, 2015, Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: a fundamental alloy design approach, Acta Mater., 94, 59, 10.1016/j.actamat.2015.04.035 Qiu, 2019, On the solidification behavior and cracking origin of a nickel-based superalloy during selective laser melting, Mater. Char., 148, 330, 10.1016/j.matchar.2018.12.032 Hunt, 1984, Steady state columnar and equiaxed growth of dendrites and eutectic, Mater. Sci. Eng., 65, 75, 10.1016/0025-5416(84)90201-5 Martin, 2017, 3D printing of high strength aluminium alloys, Nature, 549, 365, 10.1038/nature23894 Li, 2015, A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility, Acta Mater., 95, 74, 10.1016/j.actamat.2015.05.017 Tang, 2021, Alloys-by-design: application to new superalloys for additive manufacturing, Acta Mater., 202, 417, 10.1016/j.actamat.2020.09.023 Sun, 2018, Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting, NPG Asia Mater., 10, 127, 10.1038/s41427-018-0018-5 Hadadzadeh, 2018, Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: effect of build direction, Addit. Manuf., 23, 121 Delroisse, 2017, Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting, Scripta Mater., 141, 32, 10.1016/j.scriptamat.2017.07.020 Han, 2018, Investigation on selective laser melting AlSi10Mg cellular lattice strut: molten pool morphology, surface roughness and dimensional accuracy, Materials, 11, 392, 10.3390/ma11030392 Chen, 2018, Surface roughness of selective laser melted Ti-6Al-4V alloy components, Addit. Manuf., 21, 91 Shipley, 2018, Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review, Int. J. Mach. Tool Manufact., 128, 1, 10.1016/j.ijmachtools.2018.01.003 Masoomi, 2017, Laser powder bed fusion of Ti-6Al-4V parts: thermal modeling and mechanical implications, I, Int. J. Mach. Tool Manufact., 118–119, 73, 10.1016/j.ijmachtools.2017.04.007 Bertoli, 2019, Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel, Mater. Sci. Eng., 739, 109, 10.1016/j.msea.2018.10.051 Sanchez, 2021, Powder Bed Fusion of nickel-based superalloys: a review, Int. J. Mach. Tool Manufact., 165, 10.1016/j.ijmachtools.2021.103729 Criales, 2017, Laser powder bed fusion of nickel alloy 625: experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis, Int. J. Mach. Tool Manufact., 121, 22, 10.1016/j.ijmachtools.2017.03.004 Du, 2019, Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting, Mater. Sci. Eng., 760, 469, 10.1016/j.msea.2019.05.013 Keshavarzkermani, 2019, Controlling mechanical properties of additively manufactured Hastelloy X by altering solidification pattern during laser powder-bed fusion, Mater. Sci. Eng., 762, 10.1016/j.msea.2019.138081 Ning, 2017, Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 Parts: a Feasibility Study, Procedia Manuf., 10, 771, 10.1016/j.promfg.2017.07.074 Cong, 2017, A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel, Int. J. Mach. Tool Manufact., 121, 61, 10.1016/j.ijmachtools.2017.04.008 Kang, 2017, On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field, Mater. Sci. Eng. C, 70, 405, 10.1016/j.msec.2016.09.011 Du, 2019, Influence of static magnetic field on microstructure and mechanical behavior of selective laser melted AlSi10Mg alloy, Mater. Des., 181, 10.1016/j.matdes.2019.107923 Chen, 2019, Simulation of surface deformation control during selective laser melting of AlSi10Mg powder using an external magnetic field, AIP Adv., 9 Kao, 2020, Thermoelectric magnetohydrodynamic control of melt pool dynamics and microstructure evolution in additive manufacturing, Phil. Trans. R. Soc. A., 378, 10.1098/rsta.2019.0249 Wang, 2021, Thermoelectric magnetohydrodynamic model for laser-based metal additive manufacturing, Phys. Rev. Appl., 15, 10.1103/PhysRevApplied.15.064051 Du, 2020, Influence of static magnetic field on the microstructure of nickel-based superalloy by laser-directed energy deposition, Metall. Mater. Trans., 51A, 3354, 10.1007/s11661-020-05783-4 Wolff, 2020, Preliminary study on the influence of an external magnetic field on melt pool behavior in laser melting of 4140 steel using in-situ X-ray imaging, J. Micro Nano-Manuf., 8, 10.1115/1.4049952 Todaro, 2020, Grain structure control during metal 3D printing by high-intensity ultrasound, Nat. Commun., 11, 142, 10.1038/s41467-019-13874-z Du, 2014, Effect of a transverse magnetic field on solidification structure in directionally solidified Sn-Pb hypoeutectic alloys, J. Cryst. Growth, 402, 319, 10.1016/j.jcrysgro.2014.06.031 Du, 2016, Effect of a high magnetic field on the growth of ternary Al-Cu-Ag alloys during directional solidification, Acta Mater., 121, 240, 10.1016/j.actamat.2016.09.016 Du, 2022, Microstructure and crystallization evolution of directionally solidified Al-Cu-Si alloys with the assistance of a static magnetic field, Metall. Mater. Trans. A, 53, 3166, 10.1007/s11661-022-06735-w Song, 2015, Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: a review, Front. Mech. Eng., 10, 111, 10.1007/s11465-015-0341-2 Saedi, 2018, On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi, Acta Mater., 144, 552, 10.1016/j.actamat.2017.10.072 Lu, 2018, Phase field simulation of powder bed-based additive manufacturing, Acta Mater., 144, 801, 10.1016/j.actamat.2017.11.033 Hojjatzadeh, 2019, Pore elimination mechanisms during 3D printing of metals, Nat. Commun., 10, 3088, 10.1038/s41467-019-10973-9 Gong, 2014, Melt pool characterization for selective laser melting of Ti-6Al-4V pre-alloyed powder, 256 Panwisawas, 2017, Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: experimental and modelling, Acta Mater., 126, 251, 10.1016/j.actamat.2016.12.062 Mukherjee, 2018, Mitigation of lack of fusion defects in powder bed fusion additive manufacturing, J. Manuf. Process., 36, 442, 10.1016/j.jmapro.2018.10.028 Khine, 1998, Thermoelectric magnetohydrodynamic effects during Bridgman semiconductor crystal growth with a uniform axial magnetic field, J. Cryst. Growth, 183, 150, 10.1016/S0022-0248(97)00394-1 Filimonov, 2021, Modification of mechanical properties in directed energy deposition by a static magnetic field: experimental and theoretical analysis, Materials, 14, 5190, 10.3390/ma14185190 Paul, 2021, Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion, Acta Mater., 211, 10.1016/j.actamat.2021.116869 Leung, 2018, In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing, Nat. Commun., 9, 1355, 10.1038/s41467-018-03734-7 Khairallah, 2016, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater., 108, 36, 10.1016/j.actamat.2016.02.014 Roehling, 2017, Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing, Acta Mater., 128, 197, 10.1016/j.actamat.2017.02.025 Zhao, 2020, Critical instability at moving keyhole tip generates porosity in laser melting, Science, 370, 1080, 10.1126/science.abd1587 Kurz, 1992 Du, 2015, Effect of a high axial magnetic field on the structure of directionally solidified Al-Si alloys, J. Mater. Res., 30, 1043, 10.1557/jmr.2015.55 Cao, 2019, Multi-physics simulation of dendritic growth in magnetic field assisted solidification, Int. J. Heat Mass Tran., 144, 10.1016/j.ijheatmasstransfer.2019.118673 Hall, 1951, The deformation and ageing of mild steel: III discussion of results, Proc. Phys. Soc. B, 64, 747, 10.1088/0370-1301/64/9/303 Petch, 1953, The cleavage strength of polycrystals, J. Iron Steel Inst, 173, 25