Progress in Automotive Transmission Technology

Yan, Q.D., Li, S.L., Yao, S.W.: Analysis method of planetary speed-shifting mechanism based on graph theory. J. Jilin Univ. Eng. Technol. Ed. 40(4), 1029–1033 (2010)

Tan, G.H.: A study on the development of mechanical drive of vehicle transmission. J. Zhuzhou Inst. Technol. 20(4), 49–52 (2006)

Liu, X.J.: The multi-member planetary gearing layout analysis and design. J. Beijing Inst. Technol. Engl. Ed. 1, 74–91 (1984)

Dong, P., Liu, Y.F., Tenberge, P., et al.: Design and analysis of a novel multi-speed automatic transmission with four degrees-of-freedom. Mech. Mach. Theory 108, 83–96 (2017)

Wan, Y.Q., Wang, W.Q.: The development and application of the multi-freedom degrees planetary gear box scheme synthetical. Mach. Des. 15(10), 7–9 (1998)

Xie, T.L.: Topology synthesis of planetary gear train with multiple degrees of freedom for vehicle. Beijing Institute of Technology. Dissertation (2015)

Liu, T.L.: The synthetical method of multi-speed planetary gearbox with three degrees of freedom by means of computer. Veh. Power Technol. 1, 51–58 (1984)

Radzevich, S.P.: Theory of gearing: kinetics, geometry, and synthesis. CRC Press, Boca Raton (2013)

Wan, Y.Q.: The theory of computer aided design of multi-DOF planetary gearbox scheme. Mach. Des. Res. 3, 13–19 (1984)

Tian, N.S., Zhou, S.R.: A research on the optimizing method of the scheme of multivariant planetary transmission. J. Railw. Sci. Eng. 14(2), 19–26 (1996)

Liu, B.D., Li, J., Li, L.Z.: Combined solution method for optimization of multi-degree-of-freedom planetary gearbox. Veh. Power Technol. 1, 12–24 (1987)

Kahraman, A., Ligata, H., Kienzle, K., et al.: A kinematics and power flow analysis methodology for automatic transmission planetary gear trains. J. Mech. Des. 126(6), 1071–1081 (2004)

Inalpolat, M., Kahraman, A.: A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors. J. Sound Vib. 329(4), 371–393 (2010)

Xu, A.F., Jia, J.M., Liu, N.: Study on the gearing scheme of planetary gear train based on improved lever analogy. J. Mil. Transp. Univ. 16(7), 91–95 (2014)

Wang, Z., Zhang, J., Zhang, Y.: A novel graphic characteristic based method for topology analysis in substations and power plants. Trans. China Electrotech. Soc. 27(2), 255–260 (2012)

Tsai, L.W.: An application of the linkage characteristic polynomial to the topological synthesis of epicyclic gear trains. J. Mech. Transm. Autom. Des. 109(3), 329–336 (1987)

Dobrjanskyj, L., Freudenstein, F.: Some applications of graph theory to the structural analysis of mechanisms. J. Eng. Ind. 89(1), 153–158 (1967)

Buchsbaum, F., Freudenstein, F.: Synthesis of kinematic structure of geared kinematic chains and other mechanisms. J. Mech. 5(3), 357–392 (1970)

Kurth, F.: Efficiency determination and synthesis of complex–compound planetary gear transmissions. Technische Universität München. Dissertation (2012)

Troha, S., Lovrin, N., Milovancevic, M.: Selection of the two-carrier shifting planetary gear train controlled by clutches and brakes. Trans. Famena 36(3), 1–12 (2012)

Arnaudov, K., Karaivanov, D.: Higher compound planetary gear trains. Proc. VDI Berichte 1904(1), 327–344 (2005)

Li, S.l.: Computer aided design of planetary transmission scheme based on graph theory. Beijing Institute of Technology. Dissertation (2009)

Gumpoltsberger, G.: Systematische synthese und bewertung von mehrgängigen planetengetrieben. Chemnitz University of Technology. Dissertation (2007)

Ma, M.Y., Liu, Y.F., Xu, X.Y., et al.: Automatic detection of geometric compatibility for planetary gear train. Autom. Eng. 36(5), 603–607 (2014)

Ma, M.Y., Liu, Y.F., Xu, X.Y., et al.: Structure synthesis of 4-DOF planetary transmission. J. Mech. Transm. 38(9), 34–38 (2014)

Yuan, S.H., Liu, H., Peng, Z.X., et al.: Analysis of the compound split transmission based on the four-port power split device. J. Beijing Inst. Technol. Engl. Ed. 21(1), 50–57 (2012)

Liao, Y.G., Chen, M.Y.: Analysis of multi-speed transmission and electrically continuous variable transmission using lever analogy method for speed ratio determination. Adv. Mech. Eng. 9(8), 1–12 (2017)

Liu, J., Peng, H.: Modeling and control of a power-split hybrid vehicle. IEEE Trans. Control Syst. Technol. 16(6), 1242–1251 (2008)

Zhuang, W.C., Zhang, X.W., Zhao, D., et al.: Optimal design of three-planetary-gear power-split hybrid powertrains. Int. J. Autom. Technol. 17(2), 299–309 (2016)

Zhuang, W.C., Zhang, X.W., Zhao, D., et al.: Rapid configuration design of multiple-planetary-gear power-split hybrid powertrain via mode combination. IEEE/ASME Trans. Mechatron. 21(6), 2924–2934 (2016)

Zhang, X.W., Peng, H., Sun, J., et al.: Automated modeling and mode screening for exhaustive search of double-planetary-gear power split hybrid powertrains. In: Proceedings of the ASME 7th Annual Dynamic Systems and Control Conference, San Antonio, USA (2014)

Tsai, L.W., Schultz, G.: A motor-integrated parallel hybrid transmission. J. Mech. Des. 126(5), 889–894 (2004)

Dagci, O.H., Peng, H., Grizzle, J.W.: Hybrid electric powertrain design methodology with planetary gear sets for performance and fuel economy. IEEE Access 6, 9585–9602 (2018)

Qin, Z., Luo, Y., Li, K., et al.: A new powertrain design approach for power-split hybrid tracked vehicles. In: Proceedings of the ASME 2017 Dynamic Systems and Control Conference, Tysons Corner, USA (2017)

Qin, Z., Luo, Y., Li, K., et al.: Optimal design of a novel hybrid electric powertrain for tracked vehicles. Energies 10(12), 2141–2165 (2017)

Zhuang, W., Zhang, X., Peng, H., et al.: Simultaneous optimization of topology and component sizes for double planetary gear hybrid powertrains. Energies 9(6), 411–427 (2016)

Dagci, O.H., Peng, H.: A method for the exploration of hybrid electric powertrain architectures with two planetary gearsets. SAE Int. J. Altern. Powertrains 5(1), 94–108 (2016)

Ngo, H.T., Yan, H.S.: Configuration synthesis of parallel hybrid transmissions. Mech. Mach. Theory 97, 51–71 (2016)

Ngo, H.T., Yan, H.S.: Novel configurations for hybrid transmissions using a simple planetary gear train. J. Mech. Robot. 8(2), 1–10 (2016)

Hellenbroich, G., Ruschhaupt, J.: Innovative xDCT family of FEV-extremely compact 7 and 10 speed DCTs. In: Proceedings of Symposium on International Automotive Technology, India (2013)

Leesch, M.: Beitrag zur systematischen synthese und bewertung von doppelkupplungsgetrieben. Chemnitz University of Technology. Dissertation (2012)

Yue, J.H., Li, H.: Parameter optimization of 7 shafts transmission system based on MATLAB. J. Mech. Transm. 39(5), 80–84 (2015)

Ma, M.Y., Liu, Y.F., Xu, X.Y., et al.: Selection of shifting element design based on genetic algorithm. J. Beijing Univ. Aeronaut. Astronaut. 40(10), 1327–1377 (2014)

Rossetti, A., Macor, A.: Multi-objective optimization of hydro-mechanical power split transmissions. Mech. Mach. Theory 62, 112–128 (2013)

Xu, X.Y., Chen, Z.F., Liu, Y.J., et al.: Enumerative optimization procedure for the gear train optimization problem of a two-speed dedicated electric transmission. Energies 10(9), 1362–1385 (2017)

Chen, Z.F.: Critical technologies of the mechatronic system of a two-speed automatic transmission dedicated for electric vehicles. Beihang University. Dissertation (2018)

Zhang, X., Peng, H., Sun, J.: A near-optimal power management strategy for rapid component sizing of multimode power split hybrid vehicles. IEEE Trans. Control Syst. Technol. 23(2), 609–618 (2015)

Koguchi, T.: Evolution of a CVT with an auxiliary gearbox. In: Proceedings of the 9th International CTI Symposium. Shanghai, China (2015)

Scherer, H.: ZF 6-speed automatic transmission for passenger cars. SAE Technical Paper 2003-01-0596 (2003)

Dick, A., Greiner, J., Locher, A., et al.: Optimization potential for a state of the art 8-Speed AT. SAE Int. J. Passeng. Cars Mech. Syst. 6(2), 899–907 (2013)

Uozumi, S., Taniguchi, T., Tsukamoto, K., et al.: AISIN AW new six-speed automatic transmission for RWD vehicles. SAE Technical Paper 2004-01-0652 (2004)

Kondo, M., Hasegawa, Y., Takanami, Y., et al.: Toyota AA80E 8-speed automatic transmission with novel powertrain control system. SAE Technical Paper 2007-01-1311 (2007)

Suzuki, T., Sugiura, H., Niinomi, A., et al.: New RWD 10 speed automatic transmission for passenger vehicles. SAE Int. J. Engines 10(2), 695–700 (2017)

Greiner, J., Doerr, C., Nauerz, H., et al.: The new “7G-TRONIC” of Mercedes-Benz: innovative transmission technology for better driving performance, comfort and fuel economy. SAE Technical Paper 2004-01-0649 (2004)

Doerr, C., Homm, M., Indlekofer, G.: The new automatic transmission 9G-Tronic from Mercedes-Benz. In: Proceedings of the 12th International CTI Symposium-Automotive Transmissions and HEV and EV Drives, Berlin, Germany, pp. 153–160 (2013)

Hart, J.M.: General motors rear wheel drive eight speed automatic transmission. SAE Int. J. Passeng. Cars Mech. Syst. 7(1), 289–294 (2014)

Brehmer, M., Diosi, G., Haupt, J.: 10-gear automatic transmission. Patent US 13/852589 (2013)

Kluemper, S.: Allison’s new 9-speed medium duty fully automatic transmission. In: Proceedings of the 12th International CTI Symposium, Michigan, USA (2018)

Gaertner, L., Ebenhoch, M.: The ZF automatic transmission 9HP48 transmission system, design and mechanical parts. SAE Int. J. Passeng. Cars Mech. Syst. 6(2), 908–917 (2013)

Katou, N., Taniguchi, T., Tsukamoto, K., et al.: AISIN AW new six-speed automatic transmission for FWD vehicles. SAE Technical Paper 2004-01-0651 (2004)

Aoki, T., Kato, H., Kato, N., et al.: The world’s first transverse 8-speed automatic transmission. SAE Technical Paper 2013-01-1274 (2013)

Fischer, H.C., Diaz-Theilmann, A., Lecomte, O., et al.: Third generation of Global FWD 6-speed Automatic Transmission (GF6). In: Proceedings of International VDI Congress, Friedrichshafen, Germany, pp. 299–316 (2014)

Bockenstette, C.M., Marin, C.E., Otanez, P.G., et al.: Nine speed transmission with latching mechanism. Patent US 20140378266 (2014)

Renneker, C.: Ford’s “Hat Trick”: 3 new 8-speed automatic transmissions. In: Proceedings of the 12th International CTI Symposium, Michigan, USA (2018)

Suigino, S., Muramatsu, I.: Honda’s 10-speed automatic transmission. In: Proceedings of the 12th International CTI Symposium, Michigan, USA (2018)

Fu, Y.X., Yang, Y., Xu, X.Y., et al.: A new archetype of automatic transmission. SAE Technical Paper 2011-01-1429 (2011)

Schreiber, W., Rudolph, F., Becker, V.: The new dual clutch gearbox from Volkswagen. ATZ Worldw. 105(11), 2–6 (2003)

Hadler, J., Metzner, F., Schäfer, M., et al.: The seven-speed dual clutch transmission from Volkswagen. ATZ Worldw. 110(6), 26–33 (2008)

Hadler, J., Schäfer, M., Gröhlich, H., et al.: DQ500—the new Volkswagen seven-speed dual-clutch gearbox for high torques. In: Proceedings of the 18th Aachen Colloquium Automobile and Engine Technology, Aachen, Germany (2009)

Machida, S., Yagi, N., Miyata, K., et al.: Development of 8-speed DCT with torque converter for midsize vehicles. Honda R&D Tech. Rev. 26, 119–125 (2014)

Donges, A., Jauch, F., Sibla, C.: CO2 potentials for further development of the 8HP transmission kit. In: Proceedings of the 16th International CTI Symposium, Berlin, Germany (2017)

Schulz, J.: Separating springs for active separation of the friction plates in wet clutch systems. In: Proceedings of the 10th International CTI Symposium and Exhibition, Berlin, Germany (2011)

Naunheimer, H., Bertsche, B., Ryborz, J., et al.: Automotive transmissions: fundamentals, selection, design and application. Springer, Berlin (2011)

Dörr, C., Kalczynski, H., Rink, A., et al.: Nine-speed automatic transmission 9G-Tronic by Mercedes-Benz. ATZ Worldw. 116(1), 20–25 (2014)

Ichikawa, S., Takeuchi, H., Fukuda, S., et al.: Development of new plug-in hybrid system for compact-class vehicle. SAE Int. J. Altern. Powertrains 6(1), 95–102 (2017)

Iwasawa, T., Momoi, M., Hayakawa, K., et al.: Development of new variator system for the Jatco CVT7 W/R. In: Proceedings of 5th International CTI Symposium, Shanghai, China (2016)

Dong, P., Liu, Y.F., Xu, X.Y.: A method of applying two-pump system in automatic transmissions for energy conservation. Adv. Mech. Eng. 7(7), 1–11 (2015)

Liu, Y.F., Dong, P., Liu, Y., et al.: Design and application of electric oil pump in automatic transmission for efficiency improvement and start–stop function. J. Central South Univ. 23(3), 570–580 (2016)

Liu, Y., Wang, S.H., Dong, P., et al.: Dynamic analysis and control of an automatic transmission for start–stop function and efficiency improvement. Math. Probl. Eng. 2015, 1–13 (2015)

Li, R.F., Wang, J.J.: Geared system dynamic-vibration, shock and noise. China Science Press, Beijing (1997)

Houser, D.R., Ueda, Y., Harianto, J.: Determining the source of gear whine noise. Gear Solut. 2, 17–22 (2004)

Smith, J.D.: Gear Noise and Vibration. Marcel Dekker, New York (2003)

Lei, Y.L., Hou, L.G., Fu, Y., et al.: Transmission gear whine control by multi-objective optimization and modification design. SAE Technical Paper 2018-01-0993 (2018)

Bellomo, P., De Vito, N., Lang, C.H., et al.: In depth study of vehicle powertrains to identify causes of loose components rattle in transmissions. SAE Technical Paper 2002-01-0702 (2002)

Jadhav, S.M.: Powertrain NVH analysis including clutch and gear dynamics. SAE Technical Paper 2014-01-1680 (2014)

Galvagno, E., Guercioni, G.R., Vigliani, A.: Sensitivity analysis of the design parameters of a dual-clutch transmission focused on NVH performance. SAE Technical Paper 2016-01-1127 (2016)

Crowther, A.R., Zhang, N., Singh, R.: Development of a clunk simulation model for a rear wheel drive vehicle with automatic transmission. SAE Technical Paper 2005-01-2292 (2005)

Wang, J., Lei, Y., Ge, A., et al.: Noise quality analysis and metrics development under transient shifting condition. SAE Int. J. Passeng. Cars Mech. Syst. 1(1), 250–257 (2008)

Chaturvedi, G.K., Thomas, D.W.: Bearing fault detection using adaptive noise cancelling. J. Mech. Des. 104(2), 280–289 (1982)

Yue, G., Niu, W., Zhao, J., et al.: Gear whine resolution by tooth modification and multi-body dynamics analysis. SAE Technical Paper 2016-01-1061 (2016)

Bile, Y., Gondhalekar, A., Kumbhar, M.: Studies on neutral gear rattle in early stage design. SAE Technical Paper 2013-26-0109 (2013)

Campbell, B., Stokes, W., Steyer, G., et al.: Gear noise reduction of an automatic transmission through finite element dynamic simulation. SAE Technical Paper 971966 (1997)

Montanari, M., Ronchi, F., Rossi, C., et al.: Control and performance evaluation of a clutch servo system with hydraulic actuation. Control Eng. Pract. 12(11), 1369–1379 (2004)

Watson, M., Byington, C., Edward, D., et al.: Dynamic modeling and wear-based remaining useful life prediction of high power clutch systems. Tribol. Trans. 48(2), 208–217 (2005)

Walker, P.D., Zhu, B., Zhang, N.: Nonlinear modeling and analysis of direct acting solenoid valves for clutch control. J. Dyn. Syst. Meas. Contr. 136(5), 1–9 (2014)

Liu, Z., Gao, J., Zheng, Q.: Robust clutch slip controller design for automatic transmission. Proc. Inst. Mech. Eng. D J. Autom. Eng. 225(8), 989–1005 (2011)

Van de Ven, J.D., Cusack, J.: Synthesis and baseline testing of a digital pulse-width-modulated clutch. Mech. Mach. Theory 78(78), 81–91 (2014)

Dutta, A., Depraetere, B., Ionescu, C., et al.: Comparison of two-level NMPC and ILC strategies for wet-clutch control. Control Eng. Pract. 22, 114–124 (2014)

Dutta, A., Zhong, Y., Depraetere, B., et al.: Model-based and model-free learning strategies for wet clutch control. Mechatronics 24(8), 1008–1020 (2014)

Meng, F., Chen, H.Y., Zhang, T., et al.: Clutch fill control of an automatic transmission for heavy-duty vehicle applications. Mech. Syst. Signal Process. 64–65, 16–28 (2015)

Pinte, G., Depraetere, B., Symens, W., et al.: Iterative learning control for the filling of wet clutches. Mech. Syst. Signal Process. 24(7), 1924–1937 (2010)

Gao, B.Z., Chen, H., Hu, Y.F., et al.: Nonlinear feedforward–feedback control of clutch-to-clutch shift technique. Veh. Syst. Dyn. 49(12), 1895–1911 (2011)

Gao, B.Z., Chen, H., Li, J., et al.: Observer-based feedback control during torque phase of clutch-to-clutch shift process. Int. J. Veh. Des. 58(1), 93–108 (2012)

Chen, L., Xi, G., Yin, C.L.: Model referenced adaptive control to compensate slip-stick transition during clutch engagement. Int. J. Autom. Technol. 12(6), 913–920 (2011)

Dutta, A., Ionescu, C.M., De Keyser, R., et al.: Robust and two-level (nonlinear) predictive control of switched dynamical systems with unknown references for optimal wet-clutch engagement. Proc. Inst. Mech. Eng. I J. Syst. Control Eng. 228(4), 233–244 (2013)

Song, X., Sun, Z.: Pressure-based clutch control for automotive transmissions using a sliding-mode controller. IEEE/ASME Trans. Mechatron. 17(3), 534–546 (2012)

Watechagit, S.: Modeling and estimation for stepped automatic transmission with clutch-to-clutch shift technology. University of Ohio State. Dissertation (2004)

Liu, Y.G., Qin, D.T., Jiang, H., et al.: Shift control strategy and experimental validation for dry dual clutch transmissions. Mech. Mach. Theory 75, 41–53 (2014)

Van Berkel, K., Hofman, T., Serrarens, A., et al.: Fast and smooth clutch engagement control for dual-clutch transmissions. Control Eng. Pract. 22, 57–68 (2014)

Mishra, K.D., Srinivasan, K.: Robust nonlinear control of inertia phase in clutch-to-clutch shifts. IFAC-PapersOnLine 48(15), 277–284 (2015)

Hu, Y.F., Tian, L., Gao, B.Z., et al.: Nonlinear gearshifts control of dual-clutch transmissions during inertia phase. ISA Trans. 53(4), 1320–1331 (2014)

Liu, Q.F., Chen, H., Gao, B.Z., et al.: Shift control of dual clutch transmission using triple-step nonlinear method. IFAC Proc. Vol. 47(3), 5884–5889 (2014)

Zhao, Z.G., He, L., Zheng, Z.X., et al.: Self-adaptive optimal control of dry dual clutch transmission (DCT) during starting process. Mech. Syst. Signal Process. 68–69, 504–522 (2016)

Kim, D., Hahn, J., Shin, B., et al.: Adaptive compensation control of vehicle automatic transmissions for smooth shift transients based on intelligent supervisor. KSME Int. J. 15(11), 1472–1481 (2001)

Shi, G., Dong, P., Sun, H.Q., et al.: Adaptive control of the shifting process in automatic transmissions. Int. J. Autom. Technol. 18(1), 179–194 (2017)

Dan, W., Shimada, T.: Improvement of CVT acceleration feeling utilizing stepwise shift control. In: Proceedings of the 5th International CTI Symposium, Shanghai, China (2016)

Heller, S.: The new BMW hybrid powertrain with eight-speed hybrid transmission. In: Proceedings of the 4th International CTI Symposium, Shanghai, China (2015)

Xu, X.Y.: Development of transmission technology for energy-saving vehicles and new energy resource vehicle. J. Autom. Saf. Energy 8(4), 323–332 (2017)

Meisel, J.: An analytic foundation for the Toyota Prius THS-II powertrain with a comparison to a strong parallel hybrid-electric powertrain. SAE Technical Paper 2006-01-0666 (2006)

Suzuki, Y., Nishimine, A., Baba, S., et al.: Development of new plug-in hybrid transaxle for compact-class vehicles. SAE Technical Paper 2017-01-1151 (2017)

Cesiel, D., Zhu, C.: Next generation “Voltec” charging system. SAE Technical Paper 2016-01-1229 (2016)

Shen, D.F., Wang, C., Yu, H.S., et al.: A study on energy management strategy for compound power-split hybrid electric vehicle. Autom. Eng. 39(1), 15–22 (2017)

Inoue, M., Takamatsu, H., Ogami, M., et al.: New-structure motor for full hybrid electric vehicle. SAE Techical Paper 2016-01-1225 (2016)

Leng, H.X., Ge, H.L., Sun, J., et al.: SAIC Roewe 550 plug-in hybrid electric system. Sci. Technol. Rev. 34(6), 90–97 (2016)

Huang, Y., Wang, H., Khajepour, A.: Model predictive control power management strategies for HEVs: a review. J. Power Sources 341, 91–106 (2017)

Zhuang, W., Zhang, X., Li, D.: Mode shift map design and integrated energy management control of a multi-mode hybrid electric vehicle. Appl. Energy 204, 476–488 (2017)

Gao, Y., Ehsani, M.: Design and control methodology of plug-in hybrid electric vehicles. IEEE Trans. Industr. Electron. 57(2), 633–640 (2010)

Somayajula, D., Meintz, A., Ferdowsi, M.: Designing efficient hybrid electric vehicles. IEEE Veh. Technol. Mag. 4(2), 65–72 (2009)

Xu, X.Y., Wu, X.X., Jordan, M., et al.: Coordinated engine-start control of single-motor P2 hybrid electric vehicles with respect to different driving situations. Energies 11(1), 207–229 (2018)

Yang, C., Jiao, X.H., Li, L., et al.: A robust H ∞ control-based hierarchical mode transition control system for plug-in hybrid electric vehicle. Mech. Syst. Signal Process. 99, 326–344 (2018)

Chen, L., Xi, G., Sun, J.: Torque coordination control during mode transition for a series–parallel hybrid electric vehicle. IEEE Trans. Veh. Technol. 61(7), 2936–2949 (2012)

Zhao, Z.G., Lei, D., Chen, J., et al.: Optimal control of mode transition for four-wheel-drive hybrid electric vehicle with dry dual-clutch transmission. Mech. Syst. Signal Process. 105, 68–89 (2018)

Kum, D.: Control of engine-starts for optimal drivability of parallel hybrid electric vehicles. J. Dyn. Syst. Meas. Contr. 135(2), 450–472 (2013)

Yoshioka, T., Sugita, H.: Noise and vibration reduction technology in hybrid vehicle development. SAE Technical Paper 2001-01-1415 (2001)

Wang, C., Zhao, Z., Zhang, T., et al.: Mode transition coordinated control for a compound power-split hybrid car. Mech. Syst. Signal Process. 87, 192–205 (2017)

Zeng, X., Yang, N., Wang, J., et al.: Predictive-model-based dynamic coordination control strategy for power-split hybrid electric bus. Mech. Syst. Signal Process. 60–61, 785–798 (2015)

Ehsani, M., Gao, Y., Emadi, A.: Modern electric, hybrid electric, and fuel cell vehicles: fundamentals, theory, and design. CRC Press, Boca Raton (2005)

Liu, J., Anwar, M., Chiang, P., et al.: Design of the Chevrolet Bolt EV propulsion system. SAE Int. J. Altern. Powertrains 5(1), 79–86 (2016)

Scharr, S., Vahlensieck, B., Ketteler, K.H., et al.: First results from driving and testing ZF’s electric vehicle drive EVD1. In: Proceedings of 2013 T/M Symposium, Suzhou, China (2013)

Ruan, J.G., Walker, P.D., Zhang, N., et al.: An investigation of hybrid energy storage system in multi-speed electric vehicle. Energy 140(1), 291–306 (2017)

Sorniotti, A., Subramanyan, S., Turner, A., et al.: Selection of the optimal gearbox layout for an electric vehicle. SAE Int. J. Engines 4(1), 1267–1280 (2011)

Wu, X.X., Dong, P., Xu, X.Y., et al.: Energy conservation of electric vehicles by applying multi-speed transmissions. In: Proceedings of International Conference on Automotive Engineering, Mechanical and Electrical Engineering, Hong Kong, China, pp. 15–22 (2017)

Gao, B., Liang, Q., Xiang, Y., et al.: Gear ratio optimization and shift control of 2-speed I-AMT in electric vehicle. Mech. Syst. Signal Process. 50–51, 615–631 (2015)

Kim, Y., Kim, H., Lee, I., et al.: A speed control for the reduction of the shift shocks in electric vehicles with a two-speed AMT. J. Power Electron. 16(4), 1355–1366 (2016)

Zhou, X., Walker, P.D., Zhang, N., et al.: Numerical and experimental investigation of drag torque in a two-speed dual clutch transmission. Mech. Mach. Theory 79, 46–63 (2014)

Campbell, B., Pomerleau, M., Govindswamy, K., et al.: Integrated electric drive units with up to 2 speeds. In: Proceedings of 12th International CTI Symposium, Michigan, USA (2018)

Berg, M., Reimann, W., Voss, B.: DrivePacEV80—highly integrative electric drive unit for electric vehicles. In: Proceedings of 3rd Aachen Colloquium China Automobile and Engine Technology, Beijing, China, pp. 1–32 (2013)

Chen, Z.F., Liu, Y.F., Fu, Y.X., et al.: Motor-torque-limited power-on upshift control in electric vehicles with automatic transmissions. Proc. Inst. Mech. Eng. D J. Autom. Eng. 230(1), 18–36 (2016)

He, X., Zhong, H., Niu, M.: Powertrain hybridization with electrical axle. In: Proceedings of the 4th CTI Symposium, Shanghai, China (2015)

Fang, S.N., Song, J., Song, H.J., et al.: Design and control of a novel two-speed uninterrupted mechanical transmission for electric vehicles. Mech. Syst. Signal Process. 75, 473–493 (2016)

Sorniotti, A., Holdstock, T., Pilone, G.L., et al.: Analysis and simulation of the gearshift methodology for a novel two-speed transmission system for electric powertrains with a central motor. Proc. Inst. Mech. Eng. D J. Autom. Eng. 226(7), 915–929 (2012)

Yuan, Y., Wu, G., He, X., et al.: Electric vehicle drivetrain development in China. In: Proceedings of ASME/ISCIE 2012 International Symposium on Flexible Automation, St. Louis, USA, pp. 597–603 (2012)

Chen, X., Gu, C., Yin, J., et al.: An overview of distributed drive electric vehicle chassis integration. In: Proceedings of Transportation Electrification Asia-Pacific, Beijing, China, pp. 1–5 (2014)

Reimagining new energy vehicles: Research innovations at Tongji University (in the USA) (2017). http://www.sciencemag.org/collections/reimagining-new-energy-vehicles-research-innovations-tongji-university . Accessed 1 June 2018

Novellis, L.D., Sorniotti, A., Gruber, P., et al.: Comparison of feedback control techniques for torque-vectoring control of fully electric vehicles. IEEE Trans. Veh. Technol. 63(8), 3612–3623 (2014)

Fallah, S., Khajepour, A., Fidan, B., et al.: Vehicle optimal torque vectoring using state-derivative feedback and linear matrix inequality. IEEE Trans. Veh. Technol. 62(4), 1540–1552 (2013)

Jalali, M., Hashemi, E., Khajepour, A., et al.: Model predictive control of vehicle roll-over with experimental verification. Control Eng. Pract. 77(1), 95–108 (2018)

Shuai, Z., Zhang, H., Wang, J., et al.: Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling. Control Eng. Pract. 24(1), 55–66 (2014)

Shuai, Z., Zhang, H., Wang, J., et al.: Combined AFS and DYC control of four-wheel-independent-drive electric vehicles over CAN network with time-varying delays. IEEE Trans. Veh. Technol. 63(2), 591–602 (2014)

Yin, G., Wang, R., Wang, J.: Robust control for four wheel independently-actuated electric ground vehicles by external yaw-moment generation. Int. J. Automot. Technol. 16(5), 839–847 (2015)

Wang, R., Zhang, H., Wang, J.: Linear parameter-varying-based fault-tolerant controller design for a class of over-actuated non-linear systems with applications to electric vehicles. IET Control Theory Appl. 8(9), 705–717 (2014)

Wang, R., Zhang, H., Wang, J.: Linear parameter-varying controller design for four-wheel independently actuated electric ground vehicles with active steering systems. IEEE Trans. Control Syst. Technol. 22(4), 1281–1296 (2014)

Chen, Y., Wang, J.: Fast and global optimal energy-efficient control allocation with applications to over-actuated electric ground vehicles. IEEE Trans. Control Syst. Technol. 20(5), 1202–1211 (2012)

Chen, Y., Wang, J.: Design and evaluation on electric differentials for over actuated electric ground vehicles with four independent in-wheel motors. IEEE Trans. Veh. Technol. 61(4), 1534–1542 (2012)

Khosravani, S., Kasaiezadeh, A., Khajepour, A., et al.: Torque-vectoring-based vehicle control robust to driver uncertainties. IEEE Trans. Veh. Technol. 64(8), 3359–3367 (2015)

Chen, X., Yin, J., Wang, W., et al.: Approaches to diminish large unsprung mass negative effects of wheel side drive electric vehicles. J. Adv. Mech. Des. Syst. Manuf. 10(4), 1–17 (2016)

Wang, R., Jing, H., Yan, F., et al.: Optimization and finite-frequency H ∞ control of active suspensions in in-wheel motor driven electric ground vehicles. J. Franklin Inst. 352(2), 468–484 (2015)

Sakai, S., Sado, H., Hori, Y.: New skid avoidance method for electric vehicle with independently controlled 4 in-wheel motors. In: Proceedings of IEEE International Symposium on Industrial Electronics, Bled, Slovenia, pp. 934–939 (1999)

Sakai, S.I., Sado, H., Hori, Y.: Motion control in an electric vehicle with four independently driven in-wheel motors. IEEE/ASME Trans. Mechatron. 4(1), 9–16 (1999)

Wang, R., Chen, Y., Feng, D., et al.: Development and performance characterization of an electric ground vehicle with independently actuated in-wheel motors. J. Power Sources 196(8), 3962–3971 (2011)

Zhang, G., Zhang, H., Wang, J., et al.: Fault-type identification and fault estimation of the active steering system of an electric vehicle in normal driving conditions. Proc. Inst. Mech. Eng. D J. Autom. Eng. 231(12), 1679–1692 (2017)

Zhang, H., Zhang, G., Wang, J.: H ∞ observer design for LPV systems with uncertain measurements on scheduling variables: application to an electric ground vehicle. IEEE/ASME Trans. Mechatron. 21(3), 1659–1670 (2016)

Zhang, H., Zhang, G., Wang, J.: Sideslip angle estimation of an electric ground vehicle via finite-frequency H ∞ approach. IEEE Trans. Transp. Electrif. 2(2), 200–209 (2016)

Goggia, T., Sorniotti, A., Novellis, L.D., et al.: Integral sliding mode for the torque-vectoring control of fully electric vehicles: theoretical design and experimental assessment. IEEE Trans. Veh. Technol. 64(5), 1701–1715 (2015)

Novellis, L.D., Sorniotti, A., Gruber, P., et al.: Direct yaw moment control actuated through electric drivetrains and friction brakes: theoretical design and experimental assessment. Mechatronics 26, 1–15 (2015)

Wang, Y.F., Fujimoto, H., Hara, S.: Driving force distribution and control for EV with four in-wheel motors: a case study of acceleration on split-friction surfaces. IEEE Trans. Industr. Electron. 4(64), 3380–3388 (2017)

Hu, J.S., Wang, Y., Fujimoto, H., et al.: Robust yaw stability control for in-wheel motor electric vehicles. IEEE/ASME Trans. Mechatron. 22(3), 1360–1370 (2017)

Ni, J., Hu, J., Xiang, C.: Envelope control for four-wheel independently actuated autonomous ground vehicle through AFS/DYC integrated control. IEEE Trans. Veh. Technol. 66(11), 9712–9726 (2017)

Ni, J., Hu, J., Xiang, C.: Control-configured-vehicle design and implementation on X-by-wire electric vehicle. IEEE Trans. Veh. Technol. 67(5), 3755–3766 (2018)

Zhu, H., Yu, Z., Xiong, L., et al.: An anti-lock braking control strategy for 4WD electric vehicle based on variable structure control. SAE Technical Paper 2013-01-0717 (2013)

Leng, B., Xiong, L., Jin, C., et al.: Differential drive assisted steering control for an in-wheel motor electric vehicle. SAE Int. J. Passeng. Cars Electron. Electr. Syst. 8(2), 433–441 (2015)