Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications
Tóm tắt
Từ khóa
Tài liệu tham khảo
A. Mathur, K.F. Cavanaugh, K.R. Pattipati, P.K. Willett, T.R. Galie, Reasoning and modeling systems in diagnosis and prognosis, in: Proceedings of SPIE—The International Society for Optical Engineering, Orlando, FL, USA, vol. 4389 (2001) pp. 194–203.
A. Hess, Prognostics, from the need to reality—from the fleet users and PHM system designer/developers perspectives, in: Proceedings of the IEEE Aerospace Conference, Big Sky, MT, USA, vol. 6 (2002) pp. 2791–2797.
〈http://www.phmsociety.org/sites/phmsociety.org/files/Luminary_Engel_PHM09.pdf〉.
〈http://www.phmsociety.org/sites/phmsociety.org/files/Luminary_Johnson_PHM09.pdf〉.
〈http://www.phmsociety.org/sites/phmsociety.org/files/Luminary_Stewart_PHM09.pdf〉.
〈http://www.phmsociety.org/sites/phmsociety.org/files/Luminary_Nickelsburg_PHM09.pdf〉.
Abu-Hanna, 2001, Prognostic models in medicine—AI and statistical approaches, Methods of Information in Medicine, 40, 1, 10.1055/s-0038-1634456
R.C. Kemerait, New cepstral approach for prognostic maintenance of cycle machinery, in: Proceedings of the IEEE Southeast Conference (1987) pp. 256–262.
Fisher, 1988, Multi-sensor condition monitoring systems for gas turbines, Journal of Condition Monitoring, 1, 57
Muir, 1997, Oil debris monitoring for aeroderivative gas turbine, ASME Power Division (Publication) PWR, 32, 547
Byington, 2009, Shaft coupling model-based prognostics enhanced by vibration diagnostics, Insight: Non-Destructive Testing and Condition Monitoring, 51, 420, 10.1784/insi.2009.51.8.420
R. Orsagh, M. Roemer, J. Sheldon, A comprehensive prognostics approach for predicting gas turbine engine bearing life, in: Proceedings of ASME Turbo Expo, Vienna, Austria, vol. 2, 2004, pp. 777–785.
Tan, 2007, A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears, Mechanical Systems and Signal Processing, 21, 208, 10.1016/j.ymssp.2005.09.015
M.J. Roemer, G.J. Kacprzynski, R.F. Orsagh, Assessment of data and knowledge fusion strategies for prognostics and health management, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2001) pp. 62979–62988.
Hansen, 1995, New approach to the challenge of machinery prognostics, Journal of Engineering for Gas Turbines and Power, 117, 320, 10.1115/1.2814097
K.M. Reichard, M.V. Dyke, K. Maynard, Application of sensor fusion and signal classification techniques in a distributed machinery condition monitoring system, in: Proceedings of SPIE—The International Society for Optical Engineering, Orlando, FL, USA, vol. 4051 (2000) pp. 329–336.
E.C. Crow, K. Reichard, C. Rogan, J. Callen, E. Seifert, Integrated Multi-Sensor Package (IMSP) for unmanned vehicle operations, in: Proceedings of SPIE—The International Society for Optical Engineering, Florence, Italy, vol. 6736 (2007).
McFadden, 2000, Application of synchronous averaging to vibration monitoring of rolling element bearings, Mechanical Systems and Signal Processing, 14, 891, 10.1006/mssp.2000.1290
Mechefske, 1992, Fault detection and diagnosis in low speed rolling element bearings Part I: the use of parametric spectra, Mechanical Systems and Signal Processing, 6, 297, 10.1016/0888-3270(92)90032-E
Randall, 2005, Applications of spectral kurtosis in machine diagnostics and prognostics, Key Engineering Materials, 293–294, 21, 10.4028/www.scientific.net/KEM.293-294.21
Qiu, 2006, Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics, Journal of Sound and Vibration, 289, 1066, 10.1016/j.jsv.2005.03.007
Lei, 2007, Fault diagnosis of rotating machinery based on multiple ANFIS combination with GAs, Mechanical Systems and Signal Processing, 21, 2280, 10.1016/j.ymssp.2006.11.003
Yang, 2002, Third-order spectral techniques for the diagnosis of motor bearing condition using artificial neural networks, Mechanical Systems and Signal Processing, 16, 391, 10.1006/mssp.2001.1469
Wang, 2008, Fault identification and classification of rolling element bearing based on time-varying autoregressive spectrum, Mechanical Systems and Signal Processing, 22, 934, 10.1016/j.ymssp.2007.10.008
Yu, 2005, Application of EMD method and Hilbert spectrum to the fault diagnosis of roller bearings, Mechanical Systems and Signal Processing, 19, 259, 10.1016/S0888-3270(03)00099-2
Chen, 2005, Fault diagnosis method for machinery in unsteady operating condition by instantaneous power spectrum and genetic programming, Mechanical Systems and Signal Processing, 19, 175, 10.1016/j.ymssp.2003.11.004
Rai, 2007, Bearing fault diagnosis using FFT of intrinsic mode functions in Hilbert–Huang transform, Mechanical Systems and Signal Processing, 21, 2607, 10.1016/j.ymssp.2006.12.004
Huang, 2007, Residual life predictions for ball bearings based on self-organizing map and back propagation neural network methods, Mechanical Systems and Signal Processing, 21, 193, 10.1016/j.ymssp.2005.11.008
Yam, 2001, Intelligent predictive decision support system for condition-based maintenance, International Journal of Advanced Manufacturing Technology, 17, 383, 10.1007/s001700170173
Wang, 2001, Fault prognostics using dynamic wavelet neural networks, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 15, 349, 10.1017/S0890060401154089
Ocak, 2007, Online tracking of bearing wear using wavelet packet decomposition and probabilistic modeling: a method for bearing prognostics, Journal of Sound and Vibration, 32, 951, 10.1016/j.jsv.2007.01.001
B. Satish, N.D.R. Sarma, A Fuzzy BP approach for diagnosis and prognosis of bearing faults in induction motors, in: Proceedings of the IEEE Power Engineering Society General Meeting, vol. 3 (2005) pp. 2291–2294.
Yang, 2007, Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension, Mechanical Systems and Signal Processing, 21, 2012, 10.1016/j.ymssp.2006.10.005
Feng, 2009, GA-SVR based bearing condition degradation prediction, Key Engineering Materials, 413–414, 431, 10.4028/www.scientific.net/KEM.413-414.431
Li, 2008, Rotating machinery fault diagnosis using signal-adapted lifting scheme, Mechanical Systems and Signal Processing, 22, 542, 10.1016/j.ymssp.2007.09.008
Ling, 2003, Optimizing strategy on rough set neural network fault diagnosis system, Proceedings of the Chinese Society of Electrical Engineering, 5, 98
Galati, 2008, Application of the generalised likelihood ratio algorithm to the detection of a bearing fault in a helicopter transmission, Australian Journal of Mechanical Engineering, 5, 169, 10.1080/14484846.2008.11464545
Wang, 2002, A model to predict the residual life of rolling element bearings given monitored condition information to date, IMA Journal of Management Mathematics, 13, 3, 10.1093/imaman/13.1.3
Li, 2000, Stochastic prognostics for rolling element bearings, Mechanical Systems and Signal Processing, 14, 747, 10.1006/mssp.2000.1301
X. Zhang, C.K.R. Xu, S.Y. Liang, Q. Xie, L. Haynes, An integrated approach to bearing fault diagnostics and prognostics, in: Proceedings of the American Control Conference, vol. 4 (2005) pp. 2750–2755.
Choy, 1996, Analysis of the effects of surface pitting and wear on the vibration of a gear transmission system, Tribology International, 29, 77, 10.1016/0301-679X(95)00037-5
Kar, 2006, Technical note: gearbox health monitoring through multiresolution Fourier transform of vibration and current signals, Structure Health Monitoring, 5, 195, 10.1177/1475921706058002
Bartelmus, 2009, Vibration condition monitoring of planetary gearbox under varying external load, Mechanical Systems and Signal Processing, 23, 246, 10.1016/j.ymssp.2008.03.016
Peng, 2004, Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography, Mechanical Systems and Signal Processing, 18, 199, 10.1016/S0888-3270(03)00075-X
Suh, 1999, Machinery fault diagnosis and prognosis: application of advanced signal processing techniques, CIRP Annals—Manufacturing Technology, 48, 317, 10.1016/S0007-8506(07)63192-8
Loutridis, 2004, Damage detection in gear systems using empirical mode decomposition, Engineering Structures, 26, 1833, 10.1016/j.engstruct.2004.07.007
J.-Z. Wang, G.-H. Zhou, X.-S. Zhao, L. S.-X., Gearbox fault diagnosis and prediction based on empirical mode decomposition scheme, in: Proceedings of the Sixth International Conference on Machine Learning and Cybernetics, art. no. 4370302 (2007) pp. 1072–1075.
Liu, 2006, Gearbox fault diagnosis using empirical mode decomposition and Hilbert spectrum, Mechanical Systems and Signal Processing, 20, 718, 10.1016/j.ymssp.2005.02.003
Li, 2006, Wear detection in gear system using Hilbert–Huang transform, Journal of Mechanical Science and Technology, 20, 1781, 10.1007/BF03027572
Bri, 1997, Gear crack detection by adaptive amplitude and phase demodulation, Mechanical Systems and Signal Processing, 11, 149, 10.1006/mssp.1996.0068
Dellomo, 1999, Helicopter gearbox fault detection: a neural network based approach, Journal of Vibration and Acoustics, 121, 265, 10.1115/1.2893975
Staszewski, 1997, Classification of faults in gearboxes—preprocessing algorithms and neural networks, Neural Computing and Applications, 5, 160, 10.1007/BF01413861
C.S. Byington, M. Watson, D. Edwards, Data-driven neural network methodology to remaining life predictions for aircraft actuator components, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2004) pp. 3581–3589.
T. Khawaja, G. Vachtsevanos, B. Wu, Reasoning about uncertainty in prognosis: a confidence prediction neural network approach, in: Proceedings of the Annual Conference of the North American Fuzzy Information Processing Society, art. no. 1548498 (2005) pp. 7–12.
Dempsey, 2004, Integrating oil debris and vibration gear damage detection technologies using fuzzy logic, Journal of American Helicopter Society, 49, 109, 10.4050/JAHS.49.109
Wang, 2004, Prognosis of machine health condition using neuro-fuzzy systems, Mechanical Systems and Signal Processing, 18, 813, 10.1016/S0888-3270(03)00079-7
Al-Balushi, 2002, Gear fault diagnosis using energy-based features of acoustic emission signals, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 216, 249
Wu, 2004, An application of a recursive Kalman filtering algorithm in a rotating machinery fault diagnosis, NDT&E International, 37, 411, 10.1016/j.ndteint.2003.11.006
Zhan, 2006, Adaptive state detection of gearboxes under varying load conditions based on parametric modeling, Mechanical Systems and Signal Processing, 20, 188, 10.1016/j.ymssp.2004.08.004
Houser, 2002, Comparison of analytical predictions with dynamic noise and vibration measurements for a simple idler gearbox, VDI Berichte, 2, 995
Samata, 2004, Gear fault detection using artificial neural networks and support vector machines with genetic algorithms, Mechanical Systems and Signal Processing, 18, 625, 10.1016/S0888-3270(03)00020-7
Wang, 2002, Autoregressive model-based gear fault diagnosis, Journal of Vibration and Acoustics, 124, 172, 10.1115/1.1456905
Chen, 2006, Detecting and predicting early faults of complex rotating machinery based on cyclostationary time series model, Journal of Vibration and Acoustics, 128, 666, 10.1115/1.2345674
Orchard, 2009, A particle-filtering approach for on-line fault diagnosis and failure prognosis, Transactions of the Institute of Measurement and Control, 31, 221, 10.1177/0142331208092026
Andres, 2007, A virtual tool for prediction of turbocharger nonlinear dynamic response: validation against test data, Journal of Engineering for Gas Turbines and Power, 129, 1035, 10.1115/1.2436573
Gao, 2005, Research on fault diagnosis technology of low speed and heavy duty equipments based on wavelet analysis, Chinese Journal of Mechanical Engineering, 41, 222, 10.3901/JME.2005.12.222
Kim, 2007, A comparative study on damage detection in speed-up and coast-down process of grinding spindle-typed rotor-bearing system, Journal of Materials Processing Technology, 187–188, 30, 10.1016/j.jmatprotec.2006.11.222
Yang, 2009, Empirical mode decomposition, an adaptive approach for interpreting shaft vibratory signals of large rotating machinery, Journal of Sound and Vibration, 321, 1144, 10.1016/j.jsv.2008.10.012
Wu, 2009, Diagnosis of subharmonic faults of large rotating machinery based on EMD, Mechanical Systems and Signal Processing, 23, 467, 10.1016/j.ymssp.2008.03.007
Stringer, 2008, Gear modeling methodologies for advancing prognostic capabilities in rotary-wing transmission systems, Annual Forum Proceedings—AHS International, 2, 1492
Stoisser, 2008, A comprehensive theoretical, numerical and experimental approach for crack detection in power plant rotating machinery, Mechanical Systems and Signal Processing, 22, 818, 10.1016/j.ymssp.2007.11.013
A.C. McCormick, A. Nandi, Neural network autoregressive modeling of vibrations for condition monitoring of rotating shafts, in: Proceedings of the IEEE International Conference on Neural Networks, vol. 4 (1997) pp. 2214–2218.
Sahraoui, 2004, Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation, Material Letters, 58, 654, 10.1016/j.matlet.2003.06.010
Vijayakumar, 2006, Artificial neural network prediction and quantification of damage in impeller shaft using finite element simulation, International Journal of COMADEM, 9, 23
M.A. Jarrah, A.R. Al-Ali, Web-based monitoring and fault diagnostics of machinery, in: Proceedings of the IEEE International Conference on Mechatronics (2004) pp. 525–530.
Omitaomu, 2006, On-line prediction of motor shaft misalignment using fast Fourier transform generated spectra data and support vector regression, Journal of Manufacturing Science and Engineering, 128, 1019, 10.1115/1.2194059
Cho, 2009, Multivariate calibration for machine health monitoring: kernel partial least squares combined with variable selection, International Journal of Advanced Manufacturing Technology, 48, 691, 10.1007/s00170-009-2309-z
He, 2001, Detection and configuration of the shaft crack in a rotor-bearing system by genetic algorithms, Key Engineering Materials, 204–205, 221, 10.4028/www.scientific.net/KEM.204-205.221
Wang, 2009, Autoregressive model-based gear shaft fault diagnosis using the Kolmogorov–Smirnov test, Journal of Sound and Vibration, 327, 413, 10.1016/j.jsv.2009.07.004
Sinha, 2002, Trend prediction from steam turbine responses of vibration and eccentricity, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 216, 97
Ha, 2002, Leakage and rotordynamic analysis of a high pressure floating ring seal in the turbo pump unit of a liquid rocket engine, Tribology International, 35, 153, 10.1016/S0301-679X(01)00110-4
Hodkiewicz, 2004, Identification of transient axial vibration on double-suction pumps during partial flow operation, Acoustics Australia, 32, 25
Du, 2007, Condition monitoring and fault diagnosis of hydraulic pump based on inherent vibration signals, Transactions of the Chinese Society of Agricultural Engineering, 23, 120
Y. Terao, S. Wada, Time–frequency analysis of driving sound and application to electric machinery diagnosis, in: Proceedings of the International Conference on Signal Processing, vol. 1 (2004) pp. 203–206.
Li, 2009, Fault prognosis of hydraulic pump in the missile launcher, Acta Armamentarii, 30, 900
Jiang, 2007, A wavelet cluster-based band-pass filtering and envelope demodulation approach with application to fault diagnosis in a dry vacuum pump, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221, 1279
Liang, 1988, Prognostics/diagnostics of mechanical equipment by neural network, Neural Networks, 1, 33, 10.1016/0893-6080(88)90075-5
Gibiec, 2005, Prediction of machines health with application of an intelligent approach—a mining machinery case study, Key Engineering Materials, 293–294, 661, 10.4028/www.scientific.net/KEM.293-294.661
Engin, 2007, Prediction of relative efficiency reduction of centrifugal slurry pumps: empirical- and artificial-neural network-based methods, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221, 41
Sozen, 2004, Performance prediction of a vapour-compression heat-pump, Applied Energy, 79, 327, 10.1016/j.apenergy.2003.12.013
S. Perovic, P.J. Unsworth, E.H. Higham, Fuzzy logic system to detect pump faults from motor current spectra, in: Conference Record—IAS Annual Meeting, vol. 1 (2001) pp. 274–280.
Esen, 2008, Modelling a ground-coupled heat pump system using adaptive neuro-fuzzy inference systems, International Journal of Refrigeration, 31, 65, 10.1016/j.ijrefrig.2007.06.007
Li, 2006, RMINE: a rough set based data mining prototype for the reasoning of incomplete data in condition-based fault diagnosis, Journal of Intelligent Manufacturing, 17, 163, 10.1007/s10845-005-5519-8
Chen, 2009, A fault detection technique for air-source heat pump water chiller/heaters, Energy and Buildings, 41, 881, 10.1016/j.enbuild.2009.03.007
Sottile, 2006, Condition monitoring of brushless three-phase synchronous generators with stator winding or rotor circuit deterioration, IEEE Transactions on Industry Applications, 42, 1209, 10.1109/TIA.2006.880831
Wan, 2004, Vibration analysis of cracked rotor sliding bearing system with rotor–stator rubbing by harmonic wavelet transform, Journal of Sound and Vibration, 271, 507, 10.1016/S0022-460X(03)00277-3
Z. Wang, H. Jiang, Robust incipient fault diagnosis methods for enhanced aircraft engine rotor prognostics, in: Proceedings of the Second International Conference on Innovative Computing, Information and Control, art. no. 4428097 (2007) pp. 455–458.
W.G. Zanardelli, E.G. Strangas, S. Aviyente, Failure prognosis for permanent magnet AC drives based on wavelet analysis, in: Proceedings of the IEEE International Conference on Electric Machines and Drives, art. no. 1531320 (2005) pp. 64–70.
H. Xie, G. Wen, Long-term vibration trend prediction of rotor system state based on support vector regression and Discrete Wavelet Decomposition, in: Proceedings of the 2009 International Workshop on Intelligent Systems and Applications, art. no. 5072946 (2009) pp. 1–4.
Liu, 2004, Online rotor mixed fault diagnosis way based on spectrum analysis of instantaneous power in squirrel cage induction motors, IEEE Transactions on Energy Conversion, 19, 485, 10.1109/TEC.2004.832052
Wang, 2002, Bispectrum characteristics of the faults of rubbing rotor system based on experimental study, Journal of Vibration Engineering, 15, 339
Chow, 1995, Three phase induction machines asymmetrical faults indentification using bispectrum, IEEE Transactions on Energy Conversion, 10, 688, 10.1109/60.475840
Benbouzid, 1999, Induction motors' faults detection and localization using stator current advanced signal processing techniques, IEEE Transactions on Power Electronics, 14, 14, 10.1109/63.737588
Hou, 2003, Method for detecting rotor faults in asynchronous motors based on the square of the Park's vector modulus, Proceedings of the Chinese Society of Electrical Engineering, 23, 137
Schoen, 1995, An unsupervised, on-line system for induction motor fault detection using stator current monitoring, IEEE Transactions on Industry Applications, 31, 1280, 10.1109/28.475698
Bankert, 1995, Model based diagnostics and prognosis system for rotating machinery, American Society of Mechanical Engineers, GT-252, 5
Penman, 1994, Feasibility of using unsupervised learning, artificial neural networks for the condition monitoring of electrical machines, IEEE Proceedings: Electric Power Applications, 141, 317
Filippetti, 1995, Neural networks aided on-line diagnostics of induction motor–rotor faults, IEEE Transactions on Industry Applications, 31, 892, 10.1109/28.395301
Byington, 2004, Dynamic signal analysis and neural network modeling for life prediction of flight control actuators, Annual Forum Proceedings—American Helicopter Society, 1, 928
X. Wu, Y. Li, T.D. Lundell, A.K. Guru, Integrated prognosis of AC servo motor driven linear actuator using hidden semi-Markov models, in: Proceedings of the IEEE International Electric Machines and Drives Conference (2009) pp. 1408–1413.
R.J.B. Sepe, J.M. Miller, A.R. Gale, Intelligent efficiency mapping of a hybrid electric vehicle starter/alternator using fuzzy logic, in: Proceedings of the AIAA/IEEE Digital Avionics Systems Conference, vol. 2 (1999) pp. 8.
Vas, 1999
Filippetti, 2000, Recent developments of induction motor drives fault diagnosis using AI techniques, IEEE Transactions on Industrial Electronics, 47, 994, 10.1109/41.873207
Arthur, 2000, Induction machine condition monitoring with higher order spectra, IEEE Transactions on Industrial Electronics, 47, 1031, 10.1109/41.873211
Nejjari, 2000, Monitoring and diagnosis of induction motors electrical faults using a current Park's vector pattern learning approach, IEEE Transactions on Industry Applications, 36, 730, 10.1109/28.845047
Yang, 2004, Case-based reasoning system with Petri nets for induction motor fault diagnosis, Expert Systems with Applications, 27, 301, 10.1016/j.eswa.2004.02.004
Yang, 2002, An experiment of state estimation for predictive maintenance using Kalman filter on a DC motor, Reliability Engineering and System Safety, 75, 103, 10.1016/S0951-8320(01)00107-7
J. Luo, N. Madhavi, K.R. Pattipati, L. Qiao, M. Kawamoto, S. Chigusa, Model-based prognostic techniques, in: Proceedings of the IEEE AUTOTESTCON (2003) pp. 330–340.
K.T. McClintic, Feature prediction and tracking for monitoring the condition of complex mechanical systems (Ph.D. Thesis), The Pennsylvania State University, University Park, PA, USA, December 1998.
R.J. Ferlez, D.C. Lang, Gear-tooth fault detection and tracking using the wavelet transform, in: Proceedings of the 52nd Meeting of the MFPT Society (1998).
K.P. Maynard, Interstitial processing: the application of noise processing to gear fault detection, in: Proceedings of the International Conference on Condition Monitoring, University of Wales Swansea (1999) pp. 77–86.
D.C. Swanson, A general prognostic tracking algorithm for predictive maintenance, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2001) pp. 62971–62977.
Swanson, 2000, Prognostic modelling of crack growth in a tensioned steel band, Mechanical Systems and Signal Processing, 14, 789, 10.1006/mssp.2000.1324
Liang, 1988, Prognostics/diagnostics of mechanical equipment by neural network, Neural Networks, 1, 33, 10.1016/0893-6080(88)90075-5
J.B. Eugene Parker, T.M. Nigro, M.P. Carley, R.L. Barron, D.G. Ward, H.V. Poor, D. Rock, T.A. DuBois, Helicopter gearbox diagnostics and prognostics using vibration signature analysis, in: Proceedings of the SPIE—The International Society for Optical Engineering, vol. 1965 (1993) pp. 531–542.
P.P. Bonissone, K. Goebel, Soft computing applications in equipment maintenance and service, in: Proceedings of the IFSA World Congress and 20th NAFIPS International Conference, Vancouver, BC, Canada, vol. 5 (2001) pp. 2752–2757.
T. Brotherton, G. Jahns, J. Jacobs, D. Wroblewski, Prognosis of faults in gas turbine engines, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2000) pp. 163–172.
A.K. Garga, K.T. McClintic, R.L. Campbell, C.-C. Yang, M.S. Lebold, T.A. Hay, C.S. Byington, Hybrid reasoning for prognostic learning in CBM systems, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2001) pp. 2957–2969.
Wang, 2001, Fault prognostics using dynamic wavelet neural networks, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 15, 349, 10.1017/S0890060401154089
G. Vachtsevanos, P. Wang, Prognostication: algorithms and performance assessment methodologies, in: Proceedings of the ATP Fall National Meeting Condition-Based Maintenance Workshop, San Jose, California (1999) pp. 15–17.
L.C. Jaw, Neural networks for model-based prognostics, in: Proceedings of the IEEE Aerospace Applications Conference, Snowmass at Aspen, CO, USA, vol. 3 (1999) pp. 21–28.
A.J. Volponi, T. Brotherton, R. Luppold, Development of an information fusion system for engine diagnostics and health management, Collection of Technical Papers, in: Proceedings of the AIAA 1st Intelligent Systems Technical Conference, vol. 2 (2004) pp. 873–886.
H.E.G. Powrie, C.E. Fisher, Engine health monitoring: towards total prognostics, in: Proceedings of the IEEE Aerospace Applications Conference, vol. 3 (1999) pp. 11–20.
R.F. Orsagh, J. Sheldon, C.J. Klenke, Prognostics/Diagnostics for Gas Turbine Engine Bearings, in: Proceedings of the IEEE Aerospace Conference, vol. 7 (2003) pp. 3095–3013
M.J. Roemer, C.S. Byington, Prognostics and health management software for gas turbine engine bearings, in: Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air (GT2007), Montreal Canada, vol. 1 (2007) pp. 795–802.
J. Yan, M. Koc, J. Lee, Predictive algorithm for machine degradation detection using logistic regression, in: Proceedings of the 5th International Conference on Managing Innovations in Manufacturing, Milwaukee, USA (2002) pp. 172–178.
M. Luo, D. Wang, M. Pham, C.B. Low, J.B. Zhang, D.H. Zhang, Y.Z. Zhao, Model-based fault diagnosis/prognosis for wheeled mobile robots: a review, in: Proceedings of the 31st Annual Conference of IEEE Industrial Electronics Society (2005) pp. 2267–2272.
N. Vichare, M. Pecht, Enabling electronic prognostics using thermal data, in: Proceedings of the 12th International Workshop on Thermal Investigation of ICs and Systems, Nice, Côte d'Azur, France (2006).
Lall, 2006, Prognostics and health management of electronic packaging, IEEE Transactions on Components and Packaging Technologies, 29, 666, 10.1109/TCAPT.2005.850520
C. Wilkinson, D. Humphrey, B. Vermeire, J. Houston, Prognostic and health management for avionics, in: Proceedings of the IEEE Aerospace Conference, vol. 5 (2004) pp. 3435–3447.
J.F. Rufus, S. Lee, A. Thakker, Health monitoring algorithms for space application batteries, in: Proceedings of the 2008 International Conference on Prognostics and Health Management, Denver, CO, USA (2008) pp. 1–8.
B. Saha, K. Goebel, Modeling Li-ion battery capacity depletion in a particle filtering framework, in: Proceedings of the Annual Conference of the Prognostics and Health Management Society (2009).
A. Hess, L. Fila, The Joint Striker Fighter (JSF) PHM concept: potential impact on aging aircraft problems, in: Proceedings of the IEEE Aerospace Conference, vol. 6 (2000) pp. 3021–3026.
L.P. Su, M. Nolan, G. deMare, D.R. Carey, Prognostics framework [for weapon systems health monitoring], in: Proceedings of the IEEE Systems Readiness Technology Conference (1999) pp. 661–672.
Lee, 2009, Informatics platform for designing and deploying e-manufacturing systems, 1
Wang, 2009
ReVelle, 1998
Chan, 2002, Quality function deployment: a literature review, European Journal of Operational Research, 143, 463, 10.1016/S0377-2217(02)00178-9
Bhushan, 2004
Box, 1994
Brigham, 1988
Ferguson, 1994, Application of the short-time Fourier transform and the Wigner–Ville distribution to the acoustic localization of aircraft, Journal of the Acoustical Society of America, 96, 821, 10.1121/1.410320
Martin, 1985, Wigner–Ville spectral analysis of nonstationary process, IEEE Transactions on Acoustics, Speech, and Signal Processing, ASSP-33, 1461, 10.1109/TASSP.1985.1164760
Mallat, 1989, A theory for multiresolution signal decomposition: the wavelet representation, IEEE Transactions on Pattern Analysis and Machine Intelligence, 11, 674, 10.1109/34.192463
Rioul, 1991, Wavelets and signal processing, IEEE Signal Processing Magazine, 8, 14, 10.1109/79.91217
Huang, 1998, The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proceedings of the Royal Society of London, 454, 903, 10.1098/rspa.1998.0193
Huang, 2005
Jolliffe, 2002
Guo, 2002, Feature selection in principal component analysis of analytical data, Chemometrics and Intelligent Laboratory Systems, 61, 123, 10.1016/S0169-7439(01)00203-9
Duda, 2001
D.A. Reynolds, A Gaussian mixture modeling approach to text-independent speaker identification (Ph.D. Thesis), Georgia Institute of Technology (1992).
Hosmer, 2000
Yan, 2005, Degradation assessment and fault modes classification using logistic regression, Journal of Manufacturing Science and Engineering, 127, 912, 10.1115/1.1962019
Fukunaga, 1990
Sohn, 2001, Structural health monitoring using statistical pattern recognition, Journal of Dynamic Systems, Measurement and Control, 123, 706, 10.1115/1.1410933
Rasmussen, 2006
Arulampalam, 2002, A tutorial on particle filters for online nonlinear/non-Gaussian–Bayesian tracking, IEEE Transaction on Signal Processing, 50, 174, 10.1109/78.978374
Kalman, 1960, A new approach to linear filtering and prediction problems, Journal of Basic Engineering, Transaction of ASME, 82, 35, 10.1115/1.3662552
S.J. Julier, J.K. Uhlmann, A new extension of the Kalman filter to nonlinear systems, in: Proceedings of the AeroSense: 11th International Symposium Aerospace/Defense Sensing, Simulation and Controls (1997) pp. 182–193.
Voegtlin, 2002, Recursive self-organizing maps, Neural Networks, 15, 979, 10.1016/S0893-6080(02)00072-2
Jensen, 1996
K. Murphy, Dynamic Bayesian networks: representation, inference and learning (Ph.D. Thesis), University of California, Berkley (2002).
Wasserman, 1989
Mandic, 2001
Pandit, 1983
Klir, 1995
Ross, 2004
Pawlak, 1991
Pawlak, 1998, Rough set theory and its applications in data analysis, Cybernetics and Systems: An International Journal, 29, 661, 10.1080/019697298125470
Liu, 2007, Similarity based method for manufacturing process performance prediction and diagnosis, Computers In Industry, 58, 558, 10.1016/j.compind.2006.12.004
Burges, 1998, A tutorial on support vector machines for pattern recognition, Data Mining and Knowledge Discovery, 2, 121, 10.1023/A:1009715923555
Rabiner, 1986, An introduction to hidden Markov models, IEEE Transactions on Acoustics, Speech and Signal Processing Magazine, 3, 4
Rabiner, 1989, A tutorial on hidden Markov models and selected applications in speech recognition, Proceedings of the IEEE, 77, 257, 10.1109/5.18626
D. Siegel, M. Ghaffari, J. Lee, Failure prediction of critical components in military vehicles, in: Proceedings of the Society for Machinery Failure Prevention Technology (2008).
D. Siegel, Evaluation of health assessment techniques for rotating machinery (Master Thesis), University of Cincinnati, Cincinnati, OH, USA (2009).
Liao, 2009, A novel method for machine performance degradation assessment based on fixed cycle features test, Journal of Sound and Vibration, 326, 240, 10.1016/j.jsv.2009.05.005
L. Liao, H. Wang, J. Lee, Bearing health assessment and fault diagnosis using the methods of Self-organizing Map, in: Proceedings of the 61st Machinery Failure Prevention Technology (2007).