Production of dispersed powders of tungsten-cobalt by spark erosion dispersion of compact samples of hard alloys, including scrap
Tóm tắt
The processes of the influence of electrical low voltage discharges on compact samples of tungsten-containing hard alloys and the conditions of producing composite powders with a fixed phase and chemical composition and size grading are considered. The obtained results have been used to manufacture dispersed powders of tungsten-cobalt hard alloys by spark erosion dispersion of compact scrap and regenerated hard alloys.
Từ khóa
Tài liệu tham khảo
Panov, V.S. and Chuvilin, A.M., Technologiya i svoistva spechennykh tverdykh splavov i izdelii iz nikh (Technology and Properties of Sintered Hard Alloys and Goods), Moscow: MISIS, 2001.
Sasai, S., Santo, A., Shimizu, T., Kojima, T., and Itoh, H., Development of new recycling system of WC-Co cermet scraps, Waste Manag. Envir., 2002, vol. 56, pp. 13–22.
Verkhoturov, A.D., Ershova, T.B., Dvornik, M.I., and Fadeev, V.S., On dispersion of hard alloys by electrospark method, Vestn. DVO RAN, 2003, no. 6, pp. 116–123.
Dvornik, M.I., Nanostructured WC-Co particles produced by carbonization of spark eroded powder: synthesis and characterization, Int. J. Refract. Met. H., 2010, vol. 28, pp. 523–528.
Verkhoturov, A.D., Dvornik, M.I., Ershova, T.B., and Palazhchenko, V.I., Effect of energy and duration of spark discharge on the composition of powder produced by electrospark dispersion of VK8 alloy in water, Elektron. Obrab. Mater., 2005, vol. 41, no. 2, pp. 15–19.