Producing cold from heat with aluminum carboxylate-based metal-organic frameworks

Vautard, 2020, Human contribution to the record-breaking June and July 2019 heat waves in Western Europe, Environ. Res. Lett., 15, 10.1088/1748-9326/aba3d4 Christidis, 2015, Dramatically increased chance of extremely hot summers since the 2003 European heatwave, Nat. Clim. Chang., 5, 46, 10.1038/nclimate2468 Van Oldenborgh, 2019 Cui, 2016, Numerical simulation of wind-driven natural ventilation: Effects of loggia and facade porosity on air change rate, Build. Environ., 106, 131, 10.1016/j.buildenv.2016.03.021 Santamouris, 2016, Cooling the buildings-past, present and future, Energy Build., 128, 617, 10.1016/j.enbuild.2016.07.034 Akbari, 2016, Local climate change and urban heat island mitigation techniques – the state of the art, J. Civ. Eng. Manag., 22, 1 Reese, 2018, Slow coolant phaseout could worsen warming, Science, 359, 1084, 10.1126/science.359.6380.1084 IPCC (2015). Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the IPCC 5th Assessment Report. of the Intergovernmental Panel on Climate Change. O. Edenhofer, R. Pichs-Madruga, Y. Sokona, E. Farahani, S. Kadner, K. Seyboth, A. Adler, I. Baum, S. Brunner, P. Eickemeier, et al., eds. (Cambridge University Press). 2017 Sarbu, 2013, Review of solar refrigeration and cooling systems, Energy Build., 67, 286, 10.1016/j.enbuild.2013.08.022 Deng, 2011, A review of thermally activated cooling technologies for combined cooling, heating and power systems, Progr. Energy Combust. Sci., 37, 172, 10.1016/j.pecs.2010.05.003 Meunier, 2013, Adsorption heat powered heat pumps, Appl. Therm. Eng., 61, 830, 10.1016/j.applthermaleng.2013.04.050 Moliner, 2015, Multipore zeolites: synthesis and catalytic applications, Angew. Chem. Int. Ed. Engl., 54, 3560, 10.1002/anie.201406344 Najjaran, 2020, Experimental investigation of an ammonia-water-hydrogen diffusion absorption refrigerator, Appl. Energy, 256, 113899, 10.1016/j.apenergy.2019.113899 de Lange, 2015, Adsorption-driven heat pumps: the potential of metal–organic frameworks, Chem. Rev., 115, 12205, 10.1021/acs.chemrev.5b00059 Canivet, 2014, Water adsorption in MOFs: fundamentals and applications, Chem. Soc. Rev., 43, 5594, 10.1039/C4CS00078A Furukawa, 2014, Water adsorption in porous metal-organic frameworks and related materials, J. Am. Chem. Soc., 136, 4369, 10.1021/ja500330a Maurin, 2017, The new age of MOFs and of their porous-related solids, Chem. Soc. Rev., 46, 3104, 10.1039/C7CS90049J Seo, 2012, Energy-efficient dehumidification over hierachically porous metal-organic frameworks as advanced water adsorbents, Adv. Mater., 24, 806, 10.1002/adma.201104084 Jeremias, 2014, Advancement of sorption-based heat transformation by a metal coating of highly stable, hydrophilic aluminium fumarate MOF, RSC Advances, 4, 24073, 10.1039/C4RA03794D Fröhlich, 2016, Water adsorption behaviour of CAU-10-H. A thorough investigation of its structure-property relationships, J. Mater. Chem. A Mater. Energy Sustain., 4, 11859, 10.1039/C6TA01757F Tschense, 2017, New Group 13 MIL-53 Derivates based on 2,5-Thiophenedicarboxylic Acid, Z. Anorg. Allg. Chem., 643, 1600, 10.1002/zaac.201700260 Sohail, 2017, Synthesis of highly crystalline NH2-MIL-125 (Ti) with S-shaped water isotherms for adsorption heat transformation, Cryst. Growth Des., 17, 1208, 10.1021/acs.cgd.6b01597 Wang, 2018, A robust large-pore zirconium carboxylate metal-organic framework for energy-efficient water-sorption-driven refrigeration, Nat. Energy, 3, 985, 10.1038/s41560-018-0261-6 Yilmaz, 2019, Atomic- and molecular-level design of functional metal-organic frameworks (MOFs) and derivatives for energy and environmental applications, Adv. Sci. (Weinh.), 6, 1901129 Ehrenmann, 2011, Water adsorption characteristics of MIL-101 for heat-transformation applications of MOFs, Eur. J. Inorg. Chem., 471, 10.1002/ejic.201001156 Graf, 2019, Toward optimal Metal-Organic Frameworks for adsorption chillers: Insights from the scale-up of MIL-101(Cr) and NH2-MIL-125, Energy Technol. (Weinheim), 8, 1900617, 10.1002/ente.201900617 Mouchaham, 2020, Metal-organic frameworks and water: ‘from old enemies to friends’?, Trends Chem., 2, 990, 10.1016/j.trechm.2020.09.004 Kummer, 2017, A functional full-scale heat exchanger coated with aluminum fumarate metal–organic framework for adsorption heat transformation, Ind. Eng. Chem. Res., 56, 8393, 10.1021/acs.iecr.7b00106 Lenzen, 2018, Scalable green synthesis and full-scale test of the metal–organic framework CAU-10-H for use in adsorption-driven chillers, Adv. Mater., 30, 1705869, 10.1002/adma.201705869 Solovyeva, 2018, MOF-801 as a promising material for adsorption cooling: equilibrium conversion and management, Energy Convers. Manage., 174, 356, 10.1016/j.enconman.2018.08.032 Farrusseng, 2021, Adsorber heat exchanger using Al-fumarate beads for heat-pump applications - a transport study, Faraday Discuss., 225, 384, 10.1039/D0FD00009D Cadiau, 2015, Design of hydrophilic metal organic framework water adsorbents for heat reallocation, Adv. Mater., 27, 4775, 10.1002/adma.201502418 Cho, 2020, Rational design of a robust aluminum metal-organic framework for multi-purpose water-sorption-driven heat allocations, Nat. Commun., 11, 5112, 10.1038/s41467-020-18968-7 Lenzen, 2019, A metal-organic framework for efficient water-based ultra-low-temperature-driven cooling, Nat. Commun., 10, 3025, 10.1038/s41467-019-10960-0 Fathieh, 2018, Practical water production from desert air, Sci. Adv., 4, eaat3198, 10.1126/sciadv.aat3198 Alvarez, 2015, The structure of the aluminum fumarate metal-organic framework A520, Angew. Chem. Int. Ed. Engl., 54, 3664, 10.1002/anie.201410459 Reinsch, 2016, “Green” Synthesis of Metal-Organic Frameworks, Eur. J. Inorg. Chem., 27, 4290, 10.1002/ejic.201600286 Rubio-Martinez, 2017, New synthetic routes towards MOF production at scale, Chem. Soc. Rev., 46, 3453, 10.1039/C7CS00109F Tannert, 2019, Robust synthesis routes and porosity of the Al-based metal-organic frameworks Al-fumarate, CAU-10-H and MIL-160, Dalton Trans., 48, 2967, 10.1039/C8DT04688C Permyakova, 2017, Synthesis optimization, shaping, and heat reallocation evaluation of the hydrophilic metal-organic framework MIL-160(Al), ChemSusChem, 10, 1419, 10.1002/cssc.201700164 Aristov, 2008, A new methodology of studying the dynamics of water sorption/desorption under real operating conditions of adsorption heat pumps: experiment, Int. J. Heat Mass Transf., 51, 4966, 10.1016/j.ijheatmasstransfer.2007.10.042 Gkaniatsou, 2021, Moisture-participating MOF thermal battery for heat reallocation between indoor environment and building-integrated photovoltaics, Nano Energy, 87, 106224, 10.1016/j.nanoen.2021.106224 Solovyeva, 2017, NH2-MIL-125 as promising adsorbent for adsorptive cooling: water adsorption dynamics, Appl. Therm. Eng., 116, 541, 10.1016/j.applthermaleng.2017.01.080 Girnikab, 2016, Dynamic optimization of adsorptive chillers: the “AQSOA™-FAM-Z02-Water” working pair, Appl. Therm. Eng., 106, 13 AL-Dadah, 2019, Metal-organic framework materials for adsorption heat pumps, Energy, 190, 116356, 10.1016/j.energy.2019.116356 Youssef, 2017, Experimental investigation of adsorption water desalination/cooling system using CPO-27Ni MOF, Desalination, 404, 192, 10.1016/j.desal.2016.11.008 Chan, 2018, Enhancing the performance of a zeolite 13X / CaCl 2 – water adsorption cooling system by improving adsorber design and operation sequence, Energy Build., 158, 1368, 10.1016/j.enbuild.2017.11.040 Graf, 2020, Validated performance prediction of adsorption chillers: bridging the gap from gram-scale experiments to full-scale chillers, Energy Technol. (Weinheim), 8, 1901130, 10.1002/ente.201901130 Wu, 2014, Absorption heating technologies: a review and perspective, Appl. Energy, 130, 51, 10.1016/j.apenergy.2014.05.027 Cui, 2019, Heat properties of a hydrophilic carboxylate-based MOF for water adsorption applications, Appl. Therm. Eng., 161, 114135, 10.1016/j.applthermaleng.2019.114135 Schnabel, 2018, Innovative adsorbent heat exchangers: design and evaluation, 363 Bendix, 2016, Temperature and mechanical stabilities and changes in porosity of silicone binder based zeolite coatings, Ind. Eng. Chem. Res., 55, 4942, 10.1021/acs.iecr.6b00558 Cui, 2018, Metal-organic frameworks as advanced moisture sorbents for energy-efficient high temperature cooling, Sci. Rep., 8, 15284, 10.1038/s41598-018-33704-4 Rieth, 2019, Kinetic stability of metal-organic frameworks for corrosive and coordinating gas capture, Nat. Rev. Mater., 4, 708, 10.1038/s41578-019-0140-1 Liu, 2020, Water and metal−organic frameworks: from interaction toward utilization, Chem. Rev., 120, 8303, 10.1021/acs.chemrev.9b00746 Wang, 2019, Toward green production of water-stable metal-organic frameworks based on high-valence metals with low toxicities, ACS Sustain. Chem. Eng., 7, 11911 Jablonka, 2020, Big-data science in porous materials: materials genomics and machine learning, Chem. Rev., 120, 8066, 10.1021/acs.chemrev.0c00004 Cadiau, 2017, Hydrolytically stable fluorinated metal-organic frameworks for energy-efficient dehydration, Science, 356, 731, 10.1126/science.aam8310 Tschopp, 2020, Large-scale solar thermal systems in leading countries: a review and comparative study of Denmark, China, Germany and Austria, Appl. Energy, 270, 114997, 10.1016/j.apenergy.2020.114997 Connolly, 2014, Heat roadmap Europe: combining district heating with heat savings to decarbonise the EU energy system, Energy Policy, 65, 475, 10.1016/j.enpol.2013.10.035 Gadd, 2013, Daily heat load variations in Swedish district heating systems, Appl. Energy, 106, 47, 10.1016/j.apenergy.2013.01.030 de Lange, 2015, Metal-organic frameworks in adsorption-driven heat pumps: the potential of alcohols as working fluids, Langmuir, 31, 12783, 10.1021/acs.langmuir.5b03272 Rezk, 2013, Investigation of ethanol/metal organic frameworks for low temperature adsorption cooling applications, Appl. Energy, 112, 1025, 10.1016/j.apenergy.2013.06.041 Kummer, 2017, Thermally driven refrigeration by methanol adsorption on coatings of HKUST-1 and MIL-101 (Cr), Appl. Therm. Eng., 117, 689, 10.1016/j.applthermaleng.2016.11.026 Engelpracht, 2020, Upgrading Waste Heat from 90 to 110 Degrees C: The Potential of Adsorption Heat Transformation, Energy Technol. (Weinheim), 9, 2000643, 10.1002/ente.202000643 Solovyeva, 2019, “MIL-101(Cr)–methanol” as working pair for adsorption heat transformation cycles: adsorbent shaping, adsorption equilibrium and dynamics, Energy Convers. Manage., 182, 299, 10.1016/j.enconman.2018.12.065