Process monitoring for material extrusion additive manufacturing: a state-of-the-art review

Wohlers T, Campbell I, Diegel O et al (2018) Wohlers Report 2018. 3D printing and additive manufacturing state of the industry: Annual Worldwide Progress Report. Wohlers Associates Inc, Fort Collins

Yi L, Gläßner C, Aurich JC (2019) How to integrate additive manufacturing technologies into manufacturing systems successfully: a perspective from the commercial vehicle industry. J Manuf Syst 53:195–211. https://doi.org/10.1016/j.jmsy.2019.09.007

Najmon JC, Raeisi S, Tovar A (2019) Review of additive manufacturing technologies and applications in the aerospace industry. In: Froes F, Boyer R (eds) Additive Manufacturing for the Aerospace Industry. Elsevier, Amsterdam , pp 7–31

Javaid M, Haleem A (2018) Additive manufacturing applications in medical cases. A literature based review. Alexandria J Med 54:411–422. https://doi.org/10.1016/j.ajme.2017.09.003

Klotz UE, Tiberto D, Held F (2017) Optimization of 18-karat yellow gold alloys for the additive manufacturing of jewelry and watch parts. Gold Bull 50:111–121. https://doi.org/10.1007/s13404-017-0201-4

Bos F, Wolfs R, Ahmed Z et al (2016) Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual Phys Prototyp 11:209–225. https://doi.org/10.1080/17452759.2016.1209867

Bacciaglia A, Ceruti A, Liverani A (2019) Evaluation of 3D printed mouthpieces for musical instruments. Rapid Prototyp J 26:577–584. https://doi.org/10.1108/RPJ-07-2019-0187

Bloomfield M, Borstrock S (2018) Modeclix. The additively manufactured adaptable textile. Mater Today Commun 16:212–216. https://doi.org/10.1016/j.mtcomm.2018.04.002

Ngo TD, Kashani A, Imbalzano G et al (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.012

Energetics Incorporated, National Institute of Standards and Technology (2013) Measurement Science Roadmap for Metal-Based Additive Manufacturing. National Institute of Standards and Technology (NIST), Columbia MD

Kim H, Lin Y, Tseng T-LB (2018) A review on quality control in additive manufacturing. Rapid Prototyp J 24:645–669. https://doi.org/10.1108/RPJ-03-2017-0048

Huang T, Wang S, He K (2015) Quality control for fused deposition modeling based additive manufacturing: Current research and future trends. 2015 First Int Conf Reliab Syst Eng (ICRSE). https://doi.org/10.1109/ICRSE.2015.7366500

Pellegrino J, Makila T, McQueen S et al (2016) Measurement Science Roadmap for Polymer-Based Additive Manufacturing. National Institute of Standards and Technology (NIST), Columbia

Lu QY, Wong CH (2018) Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring. Virtual Phys Prototyp 13:39–48. https://doi.org/10.1080/17452759.2017.1351201

Vyavahare S, Teraiya S, Panghal D et al (2020) Fused deposition modelling: a review. Rapid Prototyp J 26:176–201. https://doi.org/10.1108/RPJ-04-2019-0106

Leach RK, Bourell D, Carmignato S et al (2019) Geometrical metrology for metal additive manufacturing. CIRP Ann Manuf Technol 68:677–700. https://doi.org/10.1016/j.cirp.2019.05.004

Chauveau D (2018) Review of NDT and process monitoring techniques usable to produce parts by welding or additive manufacturing. Weld World 62:1097–1118. https://doi.org/10.1007/s40194-018-0609-3

Albakri MI, Sturm LD, Williams CB et al (2017) Impedance-based non-destructive evaluation of additively manufactured parts. Rapid Prototyp J 23:589–601. https://doi.org/10.1108/RPJ-03-2016-0046

ISO/ASTM DIS 52900 (2018) Additive manufacturing – General principles – Terminology

Liu W-W, Tang Z-J, Liu X-Y et al (2017) A review on in-situ monitoring and adaptive control technology for laser cladding remanufacturing. Procedia CIRP 61:235–240. https://doi.org/10.1016/j.procir.2016.11.217

Xia C, Pan Z, Polden J et al (2020) A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system. J Manuf Syst 57:31–45. https://doi.org/10.1016/j.jmsy.2020.08.008

Mani M, Lane BM, Donmez MA et al (2017) A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. Int J Prod Res 55:1400–1418. https://doi.org/10.1080/00207543.2016.1223378

Yan Z, Liu W, Tang Z et al (2018) Review on thermal analysis in laser-based additive manufacturing. Opt Laser Technol 106:427–441. https://doi.org/10.1016/j.optlastec.2018.04.034

Chua ZY, Ahn IH, Moon SK (2017) Process monitoring and inspection systems in metal additive manufacturing: status and applications. Int J Precis Eng Manuf Green Technol 4:235–245. https://doi.org/10.1007/s40684-017-0029-7

Everton SK, Hirsch M, Stravroulakis P et al (2016) Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Mater Des 95:431–445. https://doi.org/10.1016/j.matdes.2016.01.099

Tapia G, Elwany A (2014) A review on process monitoring and control in metal-based additive manufacturing. J Manuf Sci Eng . https://doi.org/10.1115/1.4028540

Grasso M, Colosimo BM (2017) Process defects and in situ monitoring methods in metal powder bed fusion: a review. Meas Sci Technol. https://doi.org/10.1088/1361-6501/aa5c4f

Vora HD, Sanyal S (2020) A comprehensive review: metrology in additive manufacturing and 3D printing technology. Prog Addit Manuf. https://doi.org/10.1007/s40964-020-00142-6

Charalampous P, Kostavelis I, Tzovaras D (2020) Non-destructive quality control methods in additive manufacturing: a survey. Rapid Prototyp J 26:777–790. https://doi.org/10.1108/RPJ-08-2019-0224

Mercado Rivera FJ, Rojas Arciniegas AJ (2020) Additive manufacturing methods: techniques, materials, and closed-loop control applications. Int J Adv Manuf Technol 109:17–31. https://doi.org/10.1007/s00170-020-05663-6

Honarvar F, Varvani-Farahani A (2020) A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control. Ultrasonics 108:106227. https://doi.org/10.1016/j.ultras.2020.106227

Goh GD, Sing SL, Yeong WY (2020) A review on machine learning in 3D printing: applications, potential, and challenges. Artif Intell Rev. https://doi.org/10.1007/s10462-020-09876-9

Meng L, McWilliams B, Jarosinski W et al (2020) Machine learning in additive manufacturing: a review. JOM 72:2363–2377. https://doi.org/10.1007/s11837-020-04155-y

Razvi SS, Feng S, Narayanan A et al (2019) A review of machine learning applications in additive manufacturing. Proc ASME 2019 Int Des Eng Tech Conf Comput Inf Eng Conf. https://doi.org/10.1115/DETC2019-98415

Gibson I, Rosen D, Stucker B et al (2021) Chapter 6 - Material Extrusion. In: Gibson I, Rosen D, Stucker B et al (eds) Additive Manufacturing Technologies, 3rd edn. Springer, Cham, pp 171–202

Gonzalez-Gutierrez J, Cano S, Schuschnigg S et al (2018) Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: a review and future perspectives. Materials. https://doi.org/10.3390/ma11050840

Kampker A, Triebs J, Kawollek S et al (2019) Review on machine designs of material extrusion based additive manufacturing (AM) systems - status-Quo and potential analysis for future AM systems. Procedia CIRP 81:815–819. https://doi.org/10.1016/j.procir.2019.03.205

Anandkumar R, Babu SR (2019) FDM filaments with unique segmentation since evolution: a critical review. Prog Addit Manuf 4:185–193. https://doi.org/10.1007/s40964-018-0069-8

Mohan N, Senthil P, Vinodh S et al (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual Phys Prototyp 12:47–59. https://doi.org/10.1080/17452759.2016.1274490

Leary M (2020) Chapter 4 - Detail DFAM. In: Leary M (ed) Additive manufacturing materials and technologies: design for additive manufacturing. Elsevier, Amsterdam , pp 91–122

Nieto DM, Molina SI (2019) Large-format fused deposition additive manufacturing: a review. Rapid Prototyp J 26:793–799. https://doi.org/10.1108/RPJ-05-2018-0126

Franchetti M, Kress C (2017) An economic analysis comparing the cost feasibility of replacing injection molding processes with emerging additive manufacturing techniques. Int J Adv Manuf Technol 88:2573–2579. https://doi.org/10.1007/s00170-016-8968-7

Davies S (2021) Stratasys to supply 3D printed parts to several additional aircraft families as Airbus renews contract. TCT Magazine. https://www.tctmagazine.com/additive-manufacturing-3d-printing-news/stratasys-3d-printed-parts-several-airbus-aircraft-families. Accessed 18 Apr 2021

Mohamed OA, Masood SH, Bhowmik JL (2015) Optimization of fused deposition modeling process parameters. A review of current research and future prospects. Adv Manuf 3:42–53. https://doi.org/10.1007/s40436-014-0097-7

Rahim TNAT, Abdullah AM, Md Akil H (2019) Recent developments in fused deposition modeling-based 3D printing of polymers and their composites. Polym Rev 59:589–624. https://doi.org/10.1080/15583724.2019.1597883

ISO/ASTM DIS 52924 (2020) Additive manufacturing – Qualification principles – Classification of part properties for additive manufacturing of polymer parts

Chen RK, Lo TT, Chen L et al (2015) Nano-CT characterization of structural voids and air bubbles in fused deposition modeling for additive manufacturing. Proc ASME Int Manuf Sci Eng Conf. https://doi.org/10.1115/MSEC2015-9462

Turner BN, Strong R, A. Gold S, (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyp J 20:192–204. https://doi.org/10.1108/RPJ-01-2013-0012

Bochmann L, Bayley C, Helu M et al (2015) Understanding error generation in fused deposition modeling. Surf Topogr Metrol Prop. https://doi.org/10.1088/2051-672X/3/1/014002

Hsiang Loh G, Pei E, Gonzalez-Gutierrez J et al (2020) An overview of material extrusion troubleshooting. Appl Sci 10:4776. https://doi.org/10.3390/app10144776

Turner BN, Gold SA (2015) A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness. Rapid Prototyp J 21:250–261. https://doi.org/10.1108/RPJ-02-2013-0017

Jafari MA, Han W, Mohammadi F et al (2000) A novel system for fused deposition of advanced multiple ceramics. Rapid Prototyp J 6:161–175. https://doi.org/10.1108/13552540010337047

Sood AK, Ohdar RK, Mahapatra SS (2012) Experimental investigation and empirical modelling of FDM process for compressive strength improvement. J Adv Res 3:81–90. https://doi.org/10.1016/j.jare.2011.05.001

Jagenteufel R, Hofstätter T, Kamleitner F et al (2017) Rheology of high melt strength polypropylene for additive manufacturing. Adv Mater Lett 8:712–716. https://doi.org/10.5185/amlett.2017.1450

Beran T, Mulholland T, Henning F et al (2018) Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers. Addit Manuf 23:206–214. https://doi.org/10.1016/j.addma.2018.08.009

Grant MJ, Booth A (2009) A typology of reviews: an analysis of 14 review types and associated methodologies. Health Info Libr J 26:91–108. https://doi.org/10.1111/j.1471-1842.2009.00848.x

Booth A, Sutton A, Papaioannou D (2016) Systematic approaches to a successful literature review, 1st edn. Sage Publications, London

Sutjipto S, Tish D, Paul G et al (2019) Towards visual feedback loops for robot-controlled additive manufacturing. In: Willmann J, Block P, Hutter M et al (eds) Robotic Fabrication in Architecture, Art and Design 2018, vol 21. Springer, Cham, pp 85–97

MacDonald E, Burden E, Walker J et al (2017) Spatial frequency analysis for improved quality in big area additive manufacturing (BAAM). Proc ASME 2017 Int Mech Eng Congr Expo. https://doi.org/10.1115/IMECE2017-70630

Borish M, Post BK, Roschli A et al (2019) In-situ thermal imaging for single layer build time alteration in large-scale polymer additive manufacturing. Procedia Manuf 34:482–488. https://doi.org/10.1016/j.promfg.2019.06.202

Choo K, Friedrich B, Daugherty T et al (2019) Heat retention modeling of large area additive manufacturing. Addit Manuf 28:325–332. https://doi.org/10.1016/j.addma.2019.04.014

Borish M, Post BK, Roschli A et al (2019) Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing. JOM 71:893–899. https://doi.org/10.1007/s11837-018-3220-6

Borish M, Post BK, Roschli A et al (2020) Real-Time Defect Correction in Large-Scale Polymer Additive Manufacturing via Thermal Imaging and Laser Profilometer. Procedia Manuf 48:625–633. https://doi.org/10.1016/j.promfg.2020.05.091

Armstrong AA, Norato J, Alleyne AG et al (2020) Direct process feedback in extrusion-based 3D bioprinting. Biofabrication. https://doi.org/10.1088/1758-5090/ab4d97

Wasserfall F, Ahlers D, Hendrich N (2019) Optical in-situ verification of 3D-printed electronic circuits. IEEE 15th Int Conf Autom Sci and Eng (CASE). https://doi.org/10.1109/COASE.2019.8842835

Friedrich L, Begley M (2018) In situ characterization of low-viscosity direct ink writing: Stability, wetting, and rotational flows. J Colloid Interface Sci 529:599–609. https://doi.org/10.1016/j.jcis.2018.05.110

Friedrich L, Begley M (2019) In situ digital image analysis in direct ink writing. In: Seppala JE, Kotula AP, Snyder CR (eds) Polymer-Based Additive Manufacturing: Recent Developments, vol 1315. American Chemical Society, Washington, pp 131–149

Hardin JO, Grabowski CA, Lucas M et al (2019) All-printed multilayer high voltage capacitors with integrated processing feedback. Addit Manuf 27:327–333. https://doi.org/10.1016/j.addma.2019.02.011

DeBacker W, Sinkez P, Chhabra I et al (2020) In-process monitoring of continuous fiber additive manufacturing through force/torque sensing on the nozzle. AIAA SciTech Forum. https://doi.org/10.2514/6.2020-1632

Stockett RC, Tyler KL, Alfson BL et al (2018) Systems and methods for controlling additive manufacturing. US Patent 2018/0065307A1

Klar V, Pearce JM, Kärki P et al (2019) Ystruder: Open source multifunction extruder with sensing and monitoring capabilities. HardwareX. https://doi.org/10.1016/j.ohx.2019.e00080

Magnoni P, Rebaioli L, Fassi I et al (2017) Robotic AM System for Plastic Materials: Tuning and On-line Adjustment of Process Parameters. Procedia Manuf 11:346–354. https://doi.org/10.1016/j.promfg.2017.07.117

Rebaioli L, Magnoni P, Fassi I et al (2019) Process parameters tuning and online re-slicing for robotized additive manufacturing of big plastic objects. Robot Comput Integr Manuf 55:55–64. https://doi.org/10.1016/j.rcim.2018.07.012

Li F, Yu Z, Shen X et al (2019) Status recognition for fused deposition modeling manufactured parts based on acoustic emission. E3S Web Conf 95. https://doi.org/10.1051/e3sconf/20199501005

Nuchitprasitchai S, Roggemann M, Pearce JM (2017) Factors effecting real-time optical monitoring of fused filament 3D printing. Prog Addit Manuf 2:133–149. https://doi.org/10.1007/s40964-017-0027-x

Nuchitprasitchai S, Roggemann M, Pearce J (2017) Three hundred and sixty degree real-time monitoring of 3-D printing using computer analysis of two camera views. F Manuf Mater Process 1:2. https://doi.org/10.3390/jmmp1010002

He K, Yang Z, Bai Y et al (2018) Intelligent fault diagnosis of delta 3D printers using attitude sensors based on support vector machines. Sensors. https://doi.org/10.3390/s18041298

Zhang S, Sun Z, Long J et al (2019) Dynamic condition monitoring for 3D printers by using error fusion of multiple sparse auto-encoders. Comput Ind 105:164–176. https://doi.org/10.1016/j.compind.2018.12.004

Guo J, Wu J, Sun Z et al (2019) Fault diagnosis of delta 3D Printers Using Transfer Support Vector Machine With Attitude Signals. IEEE Access 7:40359–40368. https://doi.org/10.1109/ACCESS.2019.2905264

He K, Zeng L, Shui Q et al (2019) Low-cost and Small-sample Fault Diagnosis for 3D Printers Based on Echo State Networks. Progn Syst Health Manag Conf (PHM-Qingdao). https://doi.org/10.1109/PHM-Qingdao46334.2019.8942894

Zhang S, He K, Cabrera D et al (2019) Transmission condition monitoring of 3D printers based on the echo state network. Appl Sci 9:3058. https://doi.org/10.3390/app9153058

Li C, Cabrera D, Sancho F et al (2021) Fusing convolutional generative adversarial encoders for 3D printer fault detection with only normal condition signals. Mech Syst Signal Process. https://doi.org/10.1016/j.ymssp.2020.107108

Long J, Sun Z, Li C et al (2020) A novel sparse echo autoencoder network for data-driven fault diagnosis of delta 3-D printers. IEEE Trans Instrum Meas 69:683–692. https://doi.org/10.1109/TIM.2019.2905752

Long J, Zhang S, Li C (2020) Evolving Deep Echo State Networks for Intelligent Fault Diagnosis. IEEE Trans Ind Inform 16:4928–4937. https://doi.org/10.1109/tii.2019.2938884

Zhang S, Sun Z, Li C et al (2020) Deep hybrid state network with feature reinforcement for intelligent fault diagnosis of delta 3-D printers. IEEE Trans Ind Inform 16:779–789. https://doi.org/10.1109/TII.2019.2920661

Zhang S, Duan X, Li C et al (2021) Pre-classified reservoir computing for the fault diagnosis of 3D printers. Mech Syst Signal Process. https://doi.org/10.1016/j.ymssp.2020.106961

Yen C-T, Chuang P-C (2019) Application of a neural network integrated with the internet of things sensing technology for 3D printer fault diagnosis. Microsyst Technol. https://doi.org/10.1007/s00542-019-04323-4

Wang Y, Huang J, Wang Y et al (2020) A CNN-based Adaptive Surface Monitoring System for Fused Deposition Modeling. IEEE ASME Trans Mechatron. https://doi.org/10.1109/TMECH.2020.2996223

Kutzer MD, DeVries LD, Blas CD (2018) Part monitoring and quality assessment of conformal additive manufacturing using image reconstruction. Proc ASME 2018 Int Des Eng Tech Conf Comput Inf Eng Conf 5B. https://doi.org/10.1115/DETC2018-85370

Shen H, Sun W, Fu J (2019) Multi-view online vision detection based on robot fused deposit modeling 3D printing technology. Rapid Prototyp J 25:343–355. https://doi.org/10.1108/RPJ-03-2018-0052

Shen H, Du W, Sun W et al (2020) Visual detection of surface defects based on self-feature comparison in robot 3-D printing. Appl Sci. https://doi.org/10.3390/app10010235

Chen Z, Horowitz R (2019) Vision-assisted arm motion planning for freeform 3D Printing. 2019 Am Control Conf (ACC):4204–4209. https://doi.org/10.23919/ACC.2019.8814699

Jin Z, Zhang Z, Gu GX (2020) Automated real-time detection and prediction of interlayer imperfections in additive manufacturing processes using artificial intelligence. Adv Intell Syst. https://doi.org/10.1002/aisy.201900130

Jeong H, Kim M, Park B et al (2017) Vision-Based Real-Time Layer Error Quantification for Additive Manufacturing. Proc ASME 2017 12th Int Manuf Sci Eng Conf. https://doi.org/10.1115/MSEC2017-2991

Prakash SKA, Mahan T, Williams G et al (2020) Detection of System Compromise in Additive Manufacturing Using Video Motion Magnification. J Mech Des. https://doi.org/10.1115/1.4045547

Makagonov NG, Blinova EM, Bezukladnikov II (2017) Development of visual inspection systems for 3D printing. 2017 IEEE Conf Russ Young Res Electr Electron Eng (EIConRus):1463–1465. https://doi.org/10.1109/EIConRus.2017.7910849

Narayanan BN, Beigh K, Loughnane G et al (2019) Support vector machine and convolutional neural network based approaches for defect detection in fused filament fabrication. Proc SPIE: Appl Mach Learn. https://doi.org/10.1117/12.2524915

Zhang Z, Fidan I (2019) Failure detection of fused filament fabrication via deep learning. Proc 30th Annu Int Solid Free Fabr Symp:2156–2164

Kim C, Hillstrom A, Coronel J et al (2018) Design of air cooling housing for image sensors using additive manufacturing technology. 2018 Int Conf Inf Commun Technol Robot (ICT-ROBOT):1–4. https://doi.org/10.1109/ICT-ROBOT.2018.8549891

Preissler M, Zhang C, Rosenberger M et al (2017) Platform for 3D inline process control in additive manufacturing. Proc SPIE Opt Meas Syst Ind Insp X. https://doi.org/10.1117/12.2270493

Malik A, Lhachemi H, Ploennigs J et al (2019) An application of 3D model reconstruction and augmented reality for real-time monitoring of additive manufacturing. Procedia CIRP 81:346–351. https://doi.org/10.1016/j.procir.2019.03.060

Straub J (2017) 3D printing cybersecurity: Detecting and preventing attacks that seek to weaken a printed object by changing fill level. Proc SPIE Dimens Opt Metrol Insp Pract Appl VI. https://doi.org/10.1117/12.2264575

Straub J (2017) Identifying positioning-based attacks against 3D printed objects and the 3D printing process. Proc SPIE Pattern Recognit Track XXVIII. https://doi.org/10.1117/12.2264671

Wu M, Phoha VV, Moon YB et al (2016) Detecting malicious defects in 3D printing process using machine learning and image classification. Proc ASME 2016 Int Mech Eng Congre Expo. https://doi.org/10.1115/IMECE2016-67641

Wu M, Song Z, Moon YB (2019) Detecting cyber-physical attacks in CyberManufacturing systems with machine learning methods. J Intell Manuf 30:1111–1123. https://doi.org/10.1007/s10845-017-1315-5

Wu M, Moon YB (2020) Alert correlation for detecting cyber-manufacturing attacks and intrusions. J Comput Inf Sci Eng. https://doi.org/10.1115/1.4044208

Hurd S, Camp C, White J (2015) Quality assurance in additive manufacturing through mobile computing. Int Conf Mob Comput Appl Serv:203–220. https://doi.org/10.1007/978-3-319-29003-4_12

Wu M, Song J, Lucas Lin LW et al (2018) Establishment of intrusion detection testbed for CyberManufacturing systems. Procedia Manuf 26:1053–1064. https://doi.org/10.1016/j.promfg.2018.07.142

Wang S, Huang T, Hou T (2017) Statistical Process Control in Fused Deposition Modeling based on Tanimoto similarity of uniform surface images of product. 2017 2nd Int Conf Reliab Syst Eng (ICRSE). https://doi.org/10.1109/ICRSE.2017.8030806

Huang T, Wang S, Yang S et al (2020) Statistical process monitoring in a specified period for the image data of fused deposition modeling parts with consistent layers. J Intell Manuf. https://doi.org/10.1007/s10845-020-01628-4

Cho G, Asano H, Kon M (2019) Object-forming machine, cross-section measurement apparatus, and cross-section measurement method. US Patent 10618220B2

Jin Z, Zhang Z, Gu GX (2019) Autonomous in-situ correction of fused deposition modeling printers using computer vision and deep learning. Manuf Lett 22:11–15. https://doi.org/10.1016/j.mfglet.2019.09.005

Baumann F, Roller D (2016) Vision based error detection for 3D printing processes. MATEC Web Conf. https://doi.org/10.1051/matecconf/20165906003

Trinks S, Felden C (2019) Image mining for real time fault detection within the smart factory. 2019 IEEE 21st Conf Bus Inform (CBI):584–593. https://doi.org/10.1109/cbi.2019.00074

Trinks S, Felden C (2019) Image mining for real time quality assurance in rapid prototyping. 2019 IEEE Int Conf Big Data:3529–3534. https://doi.org/10.1109/BigData47090.2019.9005514

Wang Y, Lin Y, Zhong RY et al (2019) IoT-enabled cloud-based additive manufacturing platform to support rapid product development. Int J Prod Res 57:3975–3991. https://doi.org/10.1080/00207543.2018.1516905

Capri S, Asbury RC (2019) Image-based monitoring and feedback system for three-dimensional printing. US Patent 10265911B1

Chen P-Y, Lin W-T (2015) Three dimensional printing apparatus and method for detecting printing anomaly. US Patent 9632037B2

Straub J (2015) Initial work on the characterization of additive manufacturing (3D Printing) using software image Analysis. Machines 3:55–71. https://doi.org/10.3390/machines3020055

Straub J (2015) Characterization of 3D printing output using an optical sensing system. Proc SPIE Dimens Opt Metrol Insp Pract Appl IV. https://doi.org/10.1117/12.2177647

Straub J (2016) Alignment issues, correlation techniques and their assessment for a visible light imaging-based 3D printer quality control system. Proc SPIE Image Sens Technol Mater Devices Syst Appl III:9854. https://doi.org/10.1117/12.2228081

Straub J (2016) Automated testing and quality assurance of 3d printing / 3D printed hardware: assessment for quality assurance and cybersecurity purposes. 2016 IEEE AUTOTESTCON. https://doi.org/10.1109/AUTEST.2016.7589613

Straub J (2016) Characterization of internal geometry / covered surface defects with a visible light sensing system. Proc SPIE Image Sens Technol Mater Devices Syst Appl III:9854. https://doi.org/10.1117/12.2227802

Straub J (2017) An approach to detecting deliberately introduced defects and micro-defects in 3D printed objects. Proc SPIE: Dimens Opt Metrol Insp Pract Appl VI. https://doi.org/10.1117/12.2264588

Straub J (2017) A combined system for 3D printing cybersecurity. Proc SPIE Dimens Opt Metrol Insp Pract Appl VI. https://doi.org/10.1117/12.2264583

Straub J (2017) Physical security and cyber security issues and human error prevention for 3D printed objects: Detecting the use of an incorrect printing material. Proc SPIE Dimens Opt Metrol Insp Pract Appl VI. https://doi.org/10.1117/12.2264578

Ceruti A, Liverani A, Bombardi T (2017) Augmented vision and interactive monitoring in 3D printing process. Int J Interact Des Manuf 11:385–395. https://doi.org/10.1007/s12008-016-0347-y

Lyngby RA, Wilm J, Eiríksson ER et al (2017) In-line 3D print failure detection using computer vision. Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing

Johnson A, Zarezadeh H, Han X et al (2016) Establishing in-process inspection requirements for material extrusion additive manufacturing. Fraunhofer Direct Digit Manuf Conf

Oleff A, Küster B, Stonis M et al (2020) Optische Qualitätsprüfung für die additive Materialextrusion. ZWF 115:52–56. https://doi.org/10.3139/104.112228

He K, Zhang Q, Hong Y (2019) Profile monitoring based quality control method for fused deposition modeling process. J Intell Manuf 30:947–958. https://doi.org/10.1007/s10845-018-1424-9

Wu Y, He K, Zhou X et al (2017) Machine Vision based Statistical Process Control in Fused Deposition Modeling. 2017 12th IEEE Conf Ind Electron Appl (ICIEA):936–941. https://doi.org/10.1109/ICIEA.2017.8282973

Wu Y, He K, Hu H et al (2019) Process Monitoring of Fused Deposition Modeling through Profile Control. 2018 IEEE Int Conf Cyborg Bionic Syst (CBS):936–941. https://doi.org/10.1109/CBS.2018.8612192

Delli U, Chang S (2018) Automated Process Monitoring in 3D Printing Using Supervised Machine Learning. Procedia Manuf 26:865–870. https://doi.org/10.1016/j.promfg.2018.07.111

Engle J, Nguyen R, Buah K et al (2019) Reducing computer visualization errors for in-process monitoring of additive manufacturing systems using smart lighting and colorization system. Proc 30th Annu Int Solid Free Fabr Symp:1482–1496

Peek GA (2016) Printer monitoring. US Patent 9514397B2

Perez AA, Haid CM, Doll MP et al (2018) Automatic process control of additive manufacturing device. US Patent 10427348B2

Cheverton MA, Allen Nafis C, Tait RW et al (2015) Operational performance assessment of additive manufacturing. US Patent 9724876B2

Fastowicz J, Bąk D, Mazurek P et al (2018) Estimation of geometrical deformations of 3D prints using local cross-correlation and Monte Carlo Sampling. In: Choraś M, Choraś RS (eds) Image Processing and Communications Challenges 9, vol 681. Springer, Cham, pp 67–74

Fastowicz J, Bąk D, Mazurek P et al (2018) Quality assessment of 3D Printed surfaces in Fourier Domain. In: Choraś M, Choraś RS (eds) Image Processing and Communications Challenges 9, vol 681. Springer, Cham, pp 75–81

Fastowicz J, Okarma K (2016) Texture based quality assessment of 3D prints for different lighting conditions. In: Chmielewski LJ, Datta A, Kozera R et al (eds) Computer Vision and Graphics, vol 9972. Springer, Cham, pp 17–28

Fastowicz J, Okarma K (2017) Entropy based surface quality assessment of 3D Prints. In: Silhavy R, Senkerik R, Kominkova Oplatkova Z et al (eds) Artificial Intelligence Trends in Intelligent Systems. Springer, Cham, pp 404–413

Fastowicz J, Okarma K (2018) Fast quality assessment of 3D printed surfaces based on structural similarity of image regions. 2018 Int Interdiscip PhD Workshop (IIPhDW):401–406. https://doi.org/10.1109/IIPHDW.2018.8388399

Fastowicz J, Okarma K (2019) Automatic colour independent quality evaluation of 3D printed flat surfaces based on CLAHE and Hough Transform. In: Choraś M, Choraś RS (eds) Image Processing and Communications Challenges 10, vol 892. Springer, Cham, pp 123–131

Lech P, Fastowicz J, Okarma K (2018) Quality evaluation of 3D printed surfaces based on HOG features. In: Chmielewski LJ, Kozera R, Orłowski A et al (eds) Computer Vision and Graphics. Springer, Cham, pp 199–208

Okarma K, Fastowicz J (2016) No-reference quality assessment of 3D prints based on the GLCM analysis. 2016 21st Int Conf Methods Model Autom Robot:788–793. https://doi.org/10.1109/MMAR.2016.7575237

Okarma K, Fastowicz J (2017) Quality assessment of 3D prints based on feature similarity metrics. In: Choraś RS (ed) Image Processing and Communications Challenges 8. Springer, Cham, pp 104–111

Fastowicz J, Okarma K (2019) Quality Assessment of Photographed 3D printed flat surfaces using Hough transform and histogram equalization. J Univers Comput Sci 25:707–717. https://doi.org/10.3217/jucs-025-06-0701

Okarma K, Fastowicz J (2018) Color Independent Quality Assessment of 3D Printed Surfaces Based on Image Entropy. Proc 2017 10th Int Conf Comput Recognit Syst (CORES):308–315. https://doi.org/10.1007/978-3-319-59162-9

Okarma K, Fastowicz J (2019) Adaptation of full-reference image quality assessment methods for automatic visual evaluation of the surface quality of 3D Prints. Elektron ir Elektrotechnika 25:57–62. https://doi.org/10.5755/j01.eie.25.5.24357

Okarma K, Fastowicz J (2020) Computer vision methods for non-destructive quality assessment in additive manufacturing. In: Burduk R, Kurzynski M, Wozniak M (eds) Progress in Computer Recognition Systems, vol 977. Springer, Cham, pp 11–20

Okarma K, Fastowicz J (2020) Improved quality assessment of colour surfaces for additive manufacturing based on image entropy. Pattern Anal Appl 23:1035–1047. https://doi.org/10.1007/s10044-020-00865-w

Okarma K, Fastowicz J, Tecław M (2016) Application of structural similarity based metrics for quality assessment of 3D prints. In: Chmielewski LJ, Datta A, Kozera R et al (eds) Computer Vision and Graphics. Springer, pp 244–252

Fastowicz J, Grudziński M, Tecław M et al (2019) Objective 3D printed surface quality assessment based on entropy of depth maps. Entropy. https://doi.org/10.3390/e21010097

Fastowicz J, Lech P, Okarma K (2020) Combined metrics for quality assessment of 3D printed surfaces for aesthetic purposes: Towards Higher Accordance with Subjective Evaluations. In: Krzhizhanovskaya VV, Závodszky G, Lees MH et al (eds) Computational Science – ICCS 2020: Lecture Notes in Computer Science, vol 12143. Springer, Cham, pp 326–339

Blanco D, Fernandez P, Noriega A et al (2020) Layer contour verification in additive manufacturing by means of commercial flatbed scanners. Sensors. https://doi.org/10.3390/s20010001

Greeff GP, Schilling M (2017) Closed loop control of slippage during filament transport in molten material extrusion. Addit Manuf 14:31–38. https://doi.org/10.1016/j.addma.2016.12.005

Greeff GP, Schilling M (2017) Comparing retraction methods with volumetric exit flow measurement in molten material extrusion. Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing:70–74

Basile V, Modica F, Fontana G et al (2020) Improvements in accuracy of fused deposition modeling via integration of low-cost on-board vision systems. J Micro Nanomanuf. https://doi.org/10.1115/1.4046038

Liu C, Law ACC, Roberson D et al (2019) Image analysis-based closed loop quality control for additive manufacturing with fused filament fabrication. J Manuf Syst 51:75–86. https://doi.org/10.1016/j.jmsy.2019.04.002

Liu C, Roberson D, Kong Z (2017) Textural analysis-based online closed-loop quality control for additive manufacturing processes. Proc 2017 Ind Syst Eng Conf:1127–1132

Liu C (2019) Smart additive manufacturing using advanced data analytics and closed loop control. Dissertation, Virginia Polytechnic Institute and State University

Batchelder JS, Bosveld MS (2014) Encoded consumable materials and sensor assemblies for use in additive manufacturing systems. US Patent 9855679B2

Li N, Link G, Jelonnek J (2020) 3D microwave printing temperature control of continuous carbon fiber reinforced composites. Compos Sci Technol. https://doi.org/10.1016/j.compscitech.2019.107939

Malekipour E, Attoye S, El-Mounayri H (2018) Investigation of layer based thermal behavior in fused deposition modeling process by infrared thermography. Procedia Manuf 26:1014–1022. https://doi.org/10.1016/j.promfg.2018.07.133

Lu Y, Wang Y (2018) Monitoring temperature in additive manufacturing with physics-based compressive sensing. J Manuf Syst 48:60–70. https://doi.org/10.1016/j.jmsy.2018.05.010

Lu Y, Wang Y (2019) An improvement of physics based compressive sensing with domain decomposition to monitor temperature in fused filament fabrication process. Proc ASME 2019 14th Int Manuf Sci Eng Conf. https://doi.org/10.1115/MSEC2019-2899

Lu Y, Wang Y (2019) An efficient transient temperature monitoring of fused filament fabrication process with physics-based compressive sensing. IISE Trans 51:168–180. https://doi.org/10.1080/24725854.2018.1499054

He K, Wang H, Hu H (2018) Approach to online defect monitoring in fused deposition modeling based on the variation of the temperature field. Complexity. https://doi.org/10.1155/2018/3426928

Hu H, He K, Zhong T et al (2019) Fault diagnosis of FDM process based on support vector machine (SVM). Rapid Prototyp J 26:330–248. https://doi.org/10.1108/RPJ-05-2019-0121

Ferraris E, Zhang J, van Hooreweder B (2019) Thermography based in-process monitoring of Fused Filament Fabrication of polymeric parts. CIRP Ann Manuf Technol 68:213–216. https://doi.org/10.1016/j.cirp.2019.04.123

Pooladvand K, Salerni AD, Furlong C (2019) In-situ thermal monitoring of printed components during rapid prototyping by fused deposition modeling. Proc 2019 Annu Conf Exp Appl Mech 95:131–140. https://doi.org/10.1007/978-3-030-30098-2_20

Bartolai J, Simon TR, Xie R (2016) Predicting strength of thermoplastic polymer parts produced using additive manufacturing. Proc 27th Annu Int Solid Free Fabr Symp:951–963

Bartolai J, Simpson TW, Xie R (2018) Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion. Rapid Prototyp J 24:321–332. https://doi.org/10.1108/RPJ-02-2017-0026

Hsu S-H, Chen W-Y (2018) System and method for detecting printing filament for three dimensional printing. US Patent 10042350B2

Pollard D, Ward C, Herrmann G et al (2017) Filament Temperature Dynamics in Fused Deposition Modelling and Outlook for Control. Procedia Manuf 11:536–544. https://doi.org/10.1016/j.promfg.2017.07.147

Pollard D (2019) Improved thermal control and mechanical property evaluation for multi-dimensional fused filament fabrication of sandwich cores. Dissertation, University of Bristol

Müller M, Wings E (2016) An architecture for hybrid manufacturing combining 3D printing and CNC machining. Int J Manuf Mater Mech Eng. https://doi.org/10.1155/2016/8609108

Kousiatza C, Chatzidai N, Karalekas D (2017) Temperature mapping of 3D printed polymer plates: Experimental and numerical study. Sensors. https://doi.org/10.3390/s17030456

Miao G, Hsieh S-J, Segura JA et al (2019) Cyber-physical system for thermal stress prevention in 3D printing process. Int J Adv Manuf Technol 100:553–567. https://doi.org/10.1007/s00170-018-2667-5

Tlegenov Y, Wong YS, Hong GS (2017) A dynamic model for nozzle clog monitoring in fused deposition modelling. Rapid Prototyp J 23:391–400. https://doi.org/10.1108/RPJ-04-2016-0054

Tlegenov Y, Hong GS, Lu WF (2018) Nozzle condition monitoring in 3D printing. Robot Comput Integr Manuf 54:45–55. https://doi.org/10.1016/j.rcim.2018.05.010

Li B, Zhang L, Ren L et al (2019) 3D printing fault detection based on process data. Proc 2018 Chin Intell Syst Conf:385–396. https://doi.org/10.1007/978-981-13-2291-4_38

Liao J, Shen Z, Xiong G et al (2019) Preliminary study on fault diagnosis and intelligent learning of fused deposition modeling (FDM) 3D Printer. 14th IEEE Conf Ind Electron Appl (ICIEA):2098–2102. https://doi.org/10.1109/ICIEA.2019.8834376

Li Y, Zhao W, Li Q et al (2019) In-situ monitoring and diagnosing for fused filament fabrication process based on vibration sensors. Sensors. https://doi.org/10.3390/s19112589

Zhao X, Lian Q, He Z et al (2020) Region-based online flaw detection of 3D printing via fringe projection. Meas Sci Technol. https://doi.org/10.1088/1361-6501/ab524b

Ye Z, Liu C, Tian W et al (2020) A deep learning approach for the identification of small process shifts in additive manufacturing using 3D Point Clouds. Procedia Manuf 48:770–775. https://doi.org/10.1016/j.promfg.2020.05.112

Preissler M, Broghammer J, Rosenberger M et al (2018) Inline process monitoring method for geometrical characteristics in additive manufacturing. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/1044/1/012035

Preissler M, Zhang C, Notni G (2018) Approach for optical innervolumetric 3-dimensional data acquisition. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/1065/3/032005

Preissler M, Zhang C, Rosenberger M et al (2018) Approach for process control in additive manufacturing through layer-wise analysis with 3-dimensional pointcloud information. 2018 Digit Image Comput.: Tech Appl (DICTA):304–309. https://doi.org/10.1109/DICTA.2018.8615803

Preissler M, Notni G (2019) Feature detection in unorganized pointclouds. Proc SPIE: Photonics Educ 11144:15. https://doi.org/10.1117/12.2530809

Putman MC, Pinskiy V, Williams J et al (2019) Systems, methods, and media for artificial intelligence feedback control in additive manufacturing. US Patent 10518480B2

Holzmond O, Li X (2017) In situ real time defect detection of 3D printed parts. Addit Manuf 17:135–142. https://doi.org/10.1016/j.addma.2017.08.003

Gupta L, Khatakalle S (2017) Facilitating intelligent calibration and efficeint performance of three-dimensional printers. US Patent 20170057170A1

Lin W, Shen H, Fu J et al (2019) Online quality monitoring in material extrusion additive manufacturing processes based on laser scanning technology. Precis Eng 60:76–84. https://doi.org/10.1016/j.precisioneng.2019.06.004

Faes M, Abbeloos W, Vogeler F et al (2014) Process monitoring of extrusion based 3D printing via laser scanning. Int Conf Polym Moulds Innovations (PMI) 6:363–367. https://doi.org/10.13140/2.1.5175.0081

Sohnius F, Schlegel P, Ellerich M et al (2019) Data-driven prediction of surface quality in fused deposition modeling using machine learning. In: Wulfsberg JP, Hintze W, Behrens B-A (eds) Production at the leading edge of technology. Springer, Berlin, pp 473–481

Gunther SM (2019) Quality control of additive manufactured parts. US Patent 10183329B2

Yang Z, Jin L, Yan Y et al (2018) Filament breakage monitoring in fused deposition modeling using acoustic emission technique. Sensors. https://doi.org/10.3390/s18030749

Lotrakul P, San-Um W, Takahashi M (2017) The monitoring of three-dimensional printer filament feeding process using an acoustic emission sensor. In: Matsumoto M, Masui K, Fukushige S et al (eds) Sustainability Through Innovation in Product Life Cycle Design. Springer, Singapore, pp 499–511

Liu J, Hu Y, Wu B et al (2018) An improved fault diagnosis approach for FDM process with acoustic emission. J Manuf Process 35:570–579. https://doi.org/10.1016/j.jmapro.2018.08.038

Wu H, Wang Y, Yu Z (2016) In situ monitoring of FDM machine condition via acoustic emission. Int J Adv Manuf Technol 84:1483–1495. https://doi.org/10.1007/s00170-015-7809-4

Wu H, Yu Z, Wang Y (2017) Real-time FDM machine condition monitoring and diagnosis based on acoustic emission and hidden semi-Markov model. Int J Adv Manuf Technol 90:2027–2036. https://doi.org/10.1007/s00170-016-9548-6

Li F, Yu Z, Yang Z et al (2019) Real-time distortion monitoring during fused deposition modeling via acoustic emission. Struct Health Monit 19:412–423. https://doi.org/10.1177/1475921719849700

Wu H, Yu Z, Wang Y (2016) A new approach for online monitoring of additive manufacturing based on acoustic emission. Proc ASME 2016 Manuf Sci Eng Conf 3. https://doi.org/10.1115/MSEC20168551

Wu H, Yu Z, Wang Y (2019) Experimental study of the process failure diagnosis in additive manufacturing based on acoustic emission. Measurement 136:445–453. https://doi.org/10.1016/j.measurement.2018.12.067

Chhetri SR, Canedo A, Al Faruque MA (2016) Kcad: kinetic cyber-attack detection method for cyber-physical additive manufacturing systems. IEEE/ACM Int Conf Computer-Aided Des (ICCAD). https://doi.org/10.1145/2966986.2967050

Bayens C, Le T, Garcia L et al (2017) See No Evil, Hear No Evil, Feel No Evil, Print No Evil? Malicious Fill Patterns Detection in Additive Manufacturing. Proc 26th USENIX Secur Symp:1181–1198

Becker P, Roth C, Roennau A et al (2020) Acoustic Anomaly Detection in Additive Manufacturing with Long Short-Term Memory Neural Networks. IEEE 7th Int Conf Ind Eng Appl (ICIEA):921–926. https://doi.org/10.1109/ICIEA49774.2020.9102002

Belikovetsky S, Solewicz YA, Yampolskiy M et al (2019) Digital Audio Signature for 3D Printing Integrity. IEEE Trans Inf Forensics Secur 14:1127–1141. https://doi.org/10.1109/TIFS.2018.2851584

Kim C, Espalin D, Cuaron A et al (2015) A study to detect a material deposition status in fused deposition modeling technology. IEEE Int Conf Adv Intell Mechatron (AIM):779–783. https://doi.org/10.1109/AIM.2015.7222632

Kim C, Espalin D, Cuaron A et al (2018) Unobtrusive in situ diagnostics of filament-fed material extrusion additive Manufacturing. IEEE Trans Compon Packag Manuf Technol 8:1469–1476. https://doi.org/10.1109/TCPMT.2018.2847566

Kim CY, Espalin D, MacDonald E et al (2017) In-situ diagnostics and control method and system for material extrusion 3d printing US20170315526A1

Tlegenov Y, Lu WF, Hong GS (2019) A dynamic model for current-based nozzle condition monitoring in fused deposition modelling. Prog Addit Manuf 4:211–223. https://doi.org/10.1007/s40964-019-00089-3

Gatlin J, Belikovetsky S, Moore SB et al (2019) Detecting sabotage attacks in additive manufacturing using actuator power signatures. IEEE Access 7:133421–133432. https://doi.org/10.1109/ACCESS.2019.2928005

Chung DDL, Somaratna S (2017) Laboratory simulation of capacitance-based layer-by-layer monitoring of three-dimensional printing. Sens Actuators A Phys 268:101–109. https://doi.org/10.1016/j.sna.2017.10.061

Chung DDL (2019) Systems and method for monitoring three-dimensional printing US10449721B2

Shahriar MR, Sunny SMNA, Liu X et al (2018) MTComm based virtualization and integration of physical machine operations with digital-twins in cyber-physical manufacturing cloud. 5th IEEE Int Conf Cyber Secur Cloud Comput (CSCloud):46–51. https://doi.org/10.1109/CSCloud/EdgeCom.2018.00018

Kemperle A, Gelman F, Schmehl PJ (2016) Three-dimensional printer with force detection. US Patent 10556381B2

Batchelder JS, Swanson WJ, Johnson KC (2015) Additive manufacturing system and process with material flow feedback control. US Patent 10201931B2

Economidou SN, Karalekas D (2016) Optical sensor-based measurements of thermal expansion coefficient in additive manufacturing. Polym Test 51:117–121. https://doi.org/10.1016/j.polymertesting.2016.03.001

Economidou SN, Karalekas D (2018) Characterization of fused deposition modeling polymeric structures using embedded fiber Bragg grating sensors. In: Zhang J, Jung Y-G (eds) Additive Manufacturing. Butterworth-Heinemann, pp 163–180

Kantaros A, Giannatsis D, Karalekas D (2013) A novel strategy for the incorporation of optical sensors in FDM parts. Int Conf Adv Manuf Eng Technol (NewTech):163–170

Kantaros A, Karalekas D (2013) Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process. Mater Des 50:44–50. https://doi.org/10.1016/j.matdes.2013.02.067

Kantaros A, Karalekas D (2014) FBG based in situ characterization of residual strains in FDM process. In: Rossi M, Sasso M, Connesson N (eds) Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8, Springer, Cham

Kousiatza C, Karalekas D (2020) Experimental study of fabrication-induced residual strains and distortions in polymeric square plates built using fused deposition modeling process. Mater Des Process Commun. https://doi.org/10.1002/mdp2.149

Wang M, Liu L, Ren Y et al (2020) Investigation of heated nozzle temperature in ABS Specimens fabricated based on fiber bragg grating during fused deposition modeling process. Integr Ferroelectr 208:177–180. https://doi.org/10.1080/10584587.2020.1728729

Wang S, Lasn K, Elverum CW et al (2020) Novel in-situ residual strain measurements in additive manufacturing specimens by using the Optical Backscatter Reflectometry. Addit Manuf. https://doi.org/10.1016/j.addma.2020.101040

Rooney S, Pochiraju K (2019) Simulations of Online Non-Destructive Acoustic Diagnosis of 3D-Printed Parts Using Air-Coupled Ultrasonic Transducers. Int Mech Eng Congr Expos (IMECE2019). https://doi.org/10.1115/IMECE2019-11101

Xu X, Vallabh CKP, Cleland ZJ et al (2017) Phononic crystal artifacts for real-time in situ quality monitoring in additive manufacturing. J Manuf Sci Eng. https://doi.org/10.1115/1.4036908

Xu X, Vallabh CKP, Krishnan A et al (2019) In-process thread orientation monitoring in additive manufacturing. 3D Print Addit Manuf 6:21–30. https://doi.org/10.1089/3dp.2018.0135

Cummings I, Hillstrom E, Newton R et al (2016) In-process ultrasonic inspection of additive manufactured parts. In: Mains M (ed) Topics in Modal Analysis & Testing, vol 10. vol 10. Springer, Cham, pp 235–247

Cummings IT, Bax ME, Fuller IJ et al (2017) A framework for additive manufacturing process monitoring & control. In: Mains M, Blough JR (eds) Topics in Modal Analysis & Testing, vol 10. 10B. Springer, Cham, pp 137–146

Koskelo EC, Flynn EB, Shull PJ, Gyekenyesi AL, Yu T, Wu HF (2016) Scanning laser ultrasound and wavenumber spectroscopy for in-process inspection of additively manufactured parts. Proc SPIE Nondestruct Charact Monit Adv Mater Aerosp Civ Infrastruct. https://doi.org/10.1117/12.2222130

Heras ES, Haro FB, del Burgo J, de Agustín M (2016) Development of a filament auto-detection system for fused deposition modelling 3D printers. Técnica Industrial 315:30–36

Soriano Heras E, Blaya Haro F, del Burgo, de Agustín José M. et al (2018) Filament advance detection sensor for fused deposition modelling 3D printers. Sensors. https://doi.org/10.3390/s18051495

Weiss B, Storti D, Ganter M (2015) Low-cost closed-loop control of a 3D printer gantry. Rapid Prototyp J 21:482–490. https://doi.org/10.1108/RPJ-09-2014-0108

Li L, McGuan R, Kavehpour P et al (2018) Precision Enhancement of 3D Printing via In Situ Metrology. Proc 29th Annu Int Solid Free Fabr Symp:251–260

Li J, Xie H, Ma K (2019) In-situ monitoring of the deformation during Fused Deposition Modeling process using CGS method. Polym Test 76:166–172. https://doi.org/10.1016/j.polymertesting.2019.03.030

Bhavsar P, Sharma B, Moscoso-Kingsley W et al (2020) Detecting first layer bond quality during FDM 3D printing using a discrete wavelet energy approach. Procedia Manuf 48:718–724. https://doi.org/10.1016/j.promfg.2020.05.104

Creuzer M, Fetter W (2015) Integrated measuring and additive manufacturing apparatus and method. US Patent 2015/0174828A1

Fieber L, Bukhari SS, Wu Y et al (2020) In-line measurement of the dielectric permittivity of materials during additive manufacturing and 3D data reconstruction. Addit Manuf. https://doi.org/10.1016/j.addma.2019.101010

Batchelder JS (2014) Additive Manufacturing System and Method for Printing Three-Dimensional Parts Using Velocimetry. US Patent 9527240B2

Hampel B, Tollkühn M, Schilling M (2019) Anisotropic magnetoresistive sensors for control of additive manufacturing machines. tm - Tech Mess 86:609–618. https://doi.org/10.1515/teme-2019-0016

Reese R, Bheda H, Mondesir W (2016) Method to monitor additive manufacturing process for detection and in-situ correction of defects. US Patent 10421267B2

Falcetelli F, Di Sante R, Troiani E (2021) Strategies for embedding optical fiber sensors in additive manufacturing structures. In: Rizzo P, Milazzo A (eds) European Workshop on Structural Health Monitoring. Springer, Cham, pp 362–371

Anderegg DA, Bryant HA, Ruffin DC et al (2019) In-situ monitoring of polymer flow temperature and pressure in extrusion based additive manufacturing. Addit Manuf 26:76–83. https://doi.org/10.1016/j.addma.2019.01.002

Yoon J, He D, van Hecke B (2014) A PHM approach to additive manufacturing equipment health monitoring, fault diagnosis, and quality control. Proc Annu Conf Progn Heal Manag Soc. https://doi.org/10.36001/phmconf.2014.v6i1.2338

Kousiatza C, Karalekas D (2015) Real-time process monitoring of 3D printed multilayered structures using optical fiber bragg grating sensors. 20th Int Conf Compos Mater (ICCM) 2015-July

Kousiatza C, Karalekas D (2016) In-situ monitoring of strain and temperature distributions during fused deposition modeling process. Mater Des 97:400–406. https://doi.org/10.1016/j.matdes.2016.02.099

Kousiatza C, Tzetzis D, Karalekas D (2019) In-situ characterization of 3D printed continuous fiber reinforced composites: A methodological study using fiber Bragg grating sensors. Compos Sci Technol 174:134–141. https://doi.org/10.1016/j.compscitech.2019.02.008

Balta EC, Tilbury DM, Barton K (2019) A digital twin framework for performance monitoring and anomaly detection in fused deposition modeling. IEEE 15th Int Conf Autom Sci Eng (CASE):823–829. https://doi.org/10.1109/COASE.2019.8843166

LADANYI R (2017) Method and system for 3d printer with improved performance and 3d printer employing same. US Patent 2017/0312987A1

Chhetri SR, Faezi S, Canedo A et al (2019) QUILT: Quality Inference from Living Digital Twins in IoT-Enabled Manufacturing Systems. Proc Int Conf Internet Thing Des Implement:237–248. https://doi.org/10.1145/3302505.3310085

Yu S-Y, Malawade AV, Chhetri SR et al (2020) Sabotage attack detection for additive manufacturing systems. IEEE Access 8:27218–27231. https://doi.org/10.1109/ACCESS.2020.2971947

Wang L, Xu M'e, Si P et al (2019) On-line monitoring method and system for three-dimensional printing. US Patent 10649439B2

Sinclair JM (2017) Verification and adjustment systems and methods for additive manufacturing. US Patent 9912915B2

Haro FB, de Agustín Del Burgo JM, D’Amato R et al (2019) Monitoring an Analysis of Perturbations in Fusion Deposition Modelling (FDM) Processes for the Use of Biomaterials. J Med Syst 43:109. https://doi.org/10.1007/s10916-019-1236-2

Del Burgo, J. M. d. A., D’Amato R, Méndez JAJ et al (2019) Real time analysis of the filament for FDM 3D printers. Proc 7th Int Conf Technol Ecosyst Enhancing Multicult:354–360. https://doi.org/10.1145/3362789.3362818

Coogan TJ, Kazmer DO (2019) In-line rheological monitoring of fused deposition modeling. J Rheol 63:141–155. https://doi.org/10.1122/1.5054648

Coogan TJ, Kazmer DO (2019) Modeling of interlayer contact and contact pressure during fused filament fabrication. J Rheol 63:655–672. https://doi.org/10.1122/1.5093033

Coogan TJ, Kazmer DO (2020) Prediction of interlayer strength in material extrusion additive manufacturing. Addit Manuf 35:101368. https://doi.org/10.1016/j.addma.2020.101368

Stanisavljevic D, Cemernek D, Gursch H et al (2019) Detection of interferences in an additive manufacturing process: an experimental study integrating methods of feature selection and machine learning. Int J Prod Res 58:2862–2884. https://doi.org/10.1080/00207543.2019.1694719

Rusu CC, Belaid S, Mistodie LR et al (2019) Condition-based maintenance model for the optimization of smart manufacturing processes. Ann "Dunarea de Jos" Univ Galati, Fascicle XII, Weld Equip Technol 30:34–42. https://doi.org/10.35219/awet.2019.05

Nagar SV, Chandrashekar AC, Suvarna M (2020) Optimized additive manufacturing technology using digital twins and cyber physical systems. In: Auer ME, Ram BK (eds) Cyber-physical Systems and Digital Twins. Springer, Cham, pp 65–73

Kim JS, Lee CS, Kim S-M et al (2018) Development of data-driven in-situ monitoring and diagnosis system of fused deposition modeling (FDM) process based on support vector machine algorithm. Int J Precis Eng Manuf.-Green Technol 5:479–486. https://doi.org/10.1007/s40684-018-0051-4

Li Z, Zhang Z, Shi J et al (2019) Prediction of surface roughness in extrusion-based additive manufacturing with machine learning. Robot Comput Integr Manuf 57:488–495. https://doi.org/10.1016/j.rcim.2019.01.004

Blandon S, Amaya JC, Rojas AJ (2015) Development of a 3D printer and a supervision system towards the improvement of physical properties and surface finish of the printed parts. IEEE 2nd Colomb Conf Autom Control (CCAC). https://doi.org/10.1109/CCAC.2015.7345179

Moretti M, Bianchi F, Senin N (2020) Towards the development of a smart fused filament fabrication system using multi-sensor data fusion for in-process monitoring. Rapid Prototyp J 26:1249–1261. https://doi.org/10.1108/RPJ-06-2019-0167

Gao Y, Li B, Wang W et al (2018) Watching and safeguarding your 3D printer: online process monitoring against cyber-physical attacks. Proc ACM Interact Mob Wearable Ubiquitous Technol. https://doi.org/10.1145/3264918

Zhang J, Wang P, Gao RX (2018) Modeling of layer-wise additive manufacturing for part quality prediction. Procedia Manuf 16:155–162. https://doi.org/10.1016/j.promfg.2018.10.165

Zhang J, Wang P, Gao RX (2019) Deep learning-based tensile strength prediction in fused deposition modeling. Comput Ind 107:11–21. https://doi.org/10.1016/j.compind.2019.01.011

Schlegel P, Briele K, Schmitt RH (2019) Autonomous data-driven quality control in self-learning production systems. In: Schmitt R, Schuh G (eds) Advances in Production Research. Springer, Cham, pp 679–689

Baumann F, Schön M, Eichhoff J et al (2016) Concept development of a sensor array for 3D printer. Procedia CIRP 51:24–31. https://doi.org/10.1016/j.procir.2016.05.041

Nam J, Jo N, Kim JS et al (2020) Development of a health monitoring and diagnosis framework for fused deposition modeling process based on a machine learning algorithm. Proc Inst Mech Eng B J Eng Manuf 234:324–332. https://doi.org/10.1177/0954405419855224

Rao PK, Liu J, Roberson D et al (2015) Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors. J Manuf Sci Eng. https://doi.org/10.1115/1.4029823

Bastani K, Rao PK, Kong Z (2016) An online sparse estimation-based classification approach for real-time monitoring in advanced manufacturing processes from heterogeneous sensor data. IIE Trans 48:579–598. https://doi.org/10.1080/0740817X.2015.1122254

Sun H, Rao PK, Kong ZJ et al (2018) Functional quantitative and qualitative models for quality modeling in a fused deposition modeling process. IEEE Trans Autom Sci Eng 15:393–403. https://doi.org/10.1109/TASE.2017.2763609

MacNeish W, Gjovik E (2019) Apparatus, system and method of monitoring an additive manufacturing environment. US Patent 10406754B2

EN ISO 17296–3 (2016) Additive manufacturing – General principles – Part 3: Main characteristics and corresponding test methods

ISO/ASTM 52901 (2017) Additive manufacturing – General principles – Requirements for purchased AM parts

Farrar CR, Lieven NAJ (2007) Damage prognosis: the future of structural health monitoring. Philos Trans Royal Soc A Math Phys Eng Sci 365:623–632. https://doi.org/10.1098/rsta.2006.1927

EN ISO 14638 (2015) Geometrical product specifications (GPS) - Matrix model

EN ISO 8785 (1999) Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters