Process modelling, design and technoeconomic evaluation for continuous paracetamol crystallisation

Abejón, 2014, Analysis and optimization of continuous organic solvent nanofiltration by membrane cascade for pharmaceutical separation, AIChE J., 60, 931, 10.1002/aic.14345 Baxendale, 2015, Achieving continuous manufacturing: technologies and approaches for synthesis, workup, and isolation of drug substance, J. Pharm. Sci., 104, 781, 10.1002/jps.24252 Biegler, 2004, Retrospective on optimization, Comput. Chem. Eng., 28, 1169, 10.1016/j.compchemeng.2003.11.003 Bogdan, 2009, The continuous-flow synthesis of ibuprofen, Angew. Chem. Int. Ed., 48, 8547, 10.1002/anie.200903055 Boukouvala, 2013, Surrogate-based optimization of expensive flowsheet modeling for continuous pharmaceutical manufacturing, J. Pharm. Innov., 8, 131, 10.1007/s12247-013-9154-1 Brown, 2015, Characterization and modelling of antisolvent crystallization of salicylic acid in a continuous oscillatory baffled crystallizer, Chem. Eng. Process. Proc. Intensification, 97, 180, 10.1016/j.cep.2015.04.012 Brown, 2014, Evaluation of crystallization kinetics of adipic acid in an oscillatory baffled crystallizer, CrystEngComm., 16, 8008, 10.1039/C4CE00192C Brown, 2011, Online evaluation of paracetamol antisolvent crystallization growth rate with video imaging in an oscillatory baffled crystallizer, Cryst. Growth Des., 11, 719, 10.1021/cg1011988 Chew, 2004, Crystallization of paracetamol under oscillatory flow mixing conditions, Cryst. Growth Des., 4, 1045, 10.1021/cg049913l Cruz, 2016, Effect of operating conditions on batch and continuous paracetamol crystallization in an oscillatory flow mesoreactor, CrystEngComm, 18, 9113, 10.1039/C6CE01648K Diab, 2017, Technoeconomic evaluation of multiple Mixed Suspension-Mixed Product Removal (MSMPR) crystallizer configurations for continuous cyclosporine crystallization, Org. Process Res. Dev., 21, 1571, 10.1021/acs.oprd.7b00225 Escotet-Espinoza, 2016, Optimization methodologies for the production of pharmaceutical products, 281 Ferguson, 2014, Use of continuous MSMPR crystallization with integrated nanofiltration membrane recycle for enhanced yield and purity in API crystallization, Cryst. Growth Des., 14, 617, 10.1021/cg401491y Gernaey, 2012, A perspective on PSE in pharmaceutical process development and innovation, Comput. Chem. Eng., 42, 15, 10.1016/j.compchemeng.2012.02.022 Gerogiorgis, 2009, Steady-state optimization of a continuous pharmaceutical process, Comput.-Aided Chem. Eng., 27, 927, 10.1016/S1570-7946(09)70375-X Gerogiorgis, 2015, Continuous pharmaceutical process engineering and economics: Investigating technical efficiency, environmental impact and economic viability, Chim. Oggi Chem. Today, 33, 29 Grom, 2016, Modelling chemical kinetics of a complex reaction network of active pharmaceutical ingredient (API) synthesis with process optimization for benzazepine heterocyclic compound, Chem. Eng. J., 283, 703, 10.1016/j.cej.2015.08.008 Heider, 2014, Development of a multi-step synthesis and workup sequence for an integrated, continuous manufacturing process of a pharmaceutical, Org. Process Res. Dev., 18, 402, 10.1021/op400294z Hodges, 2015 Hopkin, 2010, A flow-based synthesis of Imatinib: the API of Gleevec, Chem. Commun., 46, 2450, 10.1039/c001550d Jolliffe, 2015, Plantwide design and economic evaluation of two Continuous Pharmaceutical Manufacturing (CPM) Cases: Ibuprofen and artemisinin, Comput. Aided Chem. Eng., 37, 2213, 10.1016/B978-0-444-63576-1.50063-7 Jolliffe, 2017, Technoeconomic optimization of a conceptual flowsheet for continuous separation of an analgaesic Active Pharmaceutical Ingredient (API), Ind. Eng. Chem. Res., 56, 4357, 10.1021/acs.iecr.6b02146 Jolliffe, 2017, Technoeconomic optimisation and comparative environmental impact evaluation of continuous crystallisation and antisolvent selection for artemisinin recovery, Comput. Chem. Eng., 103, 218, 10.1016/j.compchemeng.2017.02.046 Kwon, 2014, Modeling and control of crystal shape in continuous protein crystallization, Chem. Eng. Sci., 107, 47, 10.1016/j.ces.2013.12.005 Kwon, 2014, Crystal shape and size control using a plug flow crystallization configuration, Chem. Eng. Sci., 119, 30, 10.1016/j.ces.2014.07.058 Kwon, 2014, Enhancing the crystal production rate and reducing polydispersity in continuous protein crystallization, Ind. Eng. Chem. Res., 53, 15538, 10.1021/ie5008163 Lawton, 2009, Continuous crystallization of pharmaceuticals using a continuous oscillatory baffled crystallizer, Org. Process Res. Dev., 13, 1357, 10.1021/op900237x McGlone, 2015, Oscillatory Flow Reactors (OFRs) for continuous manufacturing and crystallization, Org. Process Res. Dev., 19, 1186, 10.1021/acs.oprd.5b00225 Ott, 2016, Life cycle assessment of multi-step rufinamide synthesis – from isolated reactions in batch to continuous microreactor networks, Green Chem., 18, 1096, 10.1039/C5GC01932J Ott, 2014, Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production, Chem. Sus. Chem., 7, 3521, 10.1002/cssc.201402313 Patel, 2011, Robust optimisation methodology for the process synthesis of continuous technologies, Comput.-Aided Chem. Eng., 29, 351, 10.1016/B978-0-444-53711-9.50071-7 Ritter, 2013, Reducing environmental impact of organic synthesis. Chem. Eng, News, 91, 22 Rogers, 2015, Challenges and opportunities in modeling pharmaceutical manufacturing processes, Comput. Chem. Eng., 81, 32, 10.1016/j.compchemeng.2015.03.018 Rogers, 2014, An integrated approach to simulation of pharmaceutical processes for solid drug manufacture, Ind. Eng. Chem. Res., 53, 5128, 10.1021/ie401344a Sato, 2015, Optimization of a crystallization process for orantinib active pharmaceutical ingredient by design of experiment to control residual solvent amount and particle size distribution, Org. Process Res. Dev., 19, 1655, 10.1021/acs.oprd.5b00149 Sen, 2013, Flowsheet optimization of an integrated continuous purification-processing pharmaceutical manufacturing operation, Chem. Eng. Sci., 102, 56, 10.1016/j.ces.2013.07.035 Sheldon, 2012, Fundamentals of green chemistry: Efficiency in reaction design, Chem. Soc. Rev., 41, 1437, 10.1039/C1CS15219J Shi, 2006, Predictive control of particle size distribution in particulate processes, Chem. Eng. Sci., 61, 268, 10.1016/j.ces.2004.12.059 Sudha, 2013, Supersaturation dependent nucleation control and separation of mono, ortho and unstable polymorphs of paracetamol by swift cooling crystallization technique, Cryst. Eng. Comm., 15, 1914, 10.1039/c2ce26681d