Process modeling in laser powder bed fusion towards defect detection and quality control via machine learning: The state-of-the-art and research challenges

ASTM, 2012, 11 Jackson, 2018, GE aviation celebrates 30,000th 3D printed fuel nozzle, 3D Print Ind Gisario, 2019, Metal additive manufacturing in the commercial aviation industry: a review, J Manuf Syst, 53, 124, 10.1016/j.jmsy.2019.08.005 Colyer, 2019, Navy expands its metal 3D printing capabilities, 3D Print Ind Soundararajan, 2021, Review on modeling techniques for powder bed fusion processes based on physical principles, Addit Manuf, 47 Bauereiß, 2014, Defect generation and propagation mechanism during additive manufacturing by selective beam melting, J Mater Process Technol, 10.1016/j.jmatprotec.2014.05.002 Gu, 2020, Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting, Int J Heat Mass Transf, 10.1016/j.ijheatmasstransfer.2020.119458 Le, 2020, Discontinuity of overhanging melt track in selective laser melting process, Int J Heat Mass Transf, 10.1016/j.ijheatmasstransfer.2020.120284 Flint, 2020, A thermal fluid dynamics framework applied to multi-component substrates experiencing fusion and vaporisation state transitions, Commun Phys, 10.1038/s42005-020-00462-7 Khorasani, 2021, Numerical and analytical investigation on meltpool temperature of laser-based powder bed fusion of IN718, Int J Heat Mass Transf, 10.1016/j.ijheatmasstransfer.2021.121477 Sufiiarov, 2017, The effect of layer thickness at selective laser melting, Procedia Eng, 174, 126, 10.1016/j.proeng.2017.01.179 Shayesteh Moghaddam, 2018, Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting, Mater Sci Eng A, 724, 220, 10.1016/j.msea.2018.03.072 Kim, 2017, Investigation of pore structure in cobalt chrome additively manufactured parts using X-ray computed tomography and three-dimensional image analysis, Addit Manuf, 17, 23 Poulin, 2019, Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity, Int J Fatigue, 127, 144, 10.1016/j.ijfatigue.2019.06.008 Hu, 2019, Formation of SS316L single tracks in micro selective laser melting: surface, geometry, and defects, Adv Mater Sci Eng, 10.1155/2019/9451406 Gu, 2019, Microstructure evolution and mechanical properties of laser additive manufacturing of high strength Al-cu-mg alloy, Opt Laser Technol, 112, 140, 10.1016/j.optlastec.2018.11.008 Zhou, 2019, The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power, Mater Sci Eng A, 742, 150, 10.1016/j.msea.2018.10.092 Wang, 2016, Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing, Acta Mater, 110, 226, 10.1016/j.actamat.2016.03.019 Fernandez-Zelaia, 2019, Process-structure-property modeling for severe plastic deformation processes using orientation imaging microscopy and data-driven techniques, Integr Mater Manuf Innov, 10.1007/s40192-019-00125-8 Pavlov, 2010, Pyrometric analysis of thermal processes in SLM technology, Phys Procedia, 10.1016/j.phpro.2010.08.080 Furumoto, 2013, Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera, CIRP Ann - Manuf Technol, 10.1016/j.cirp.2013.03.032 Gould, 2021, In situ analysis of laser powder bed fusion using simultaneous high-speed infrared and X-ray imaging, JOM, 10.1007/s11837-020-04291-5 Lane, 2016, Thermographic measurements of the commercial laser powder bed fusion process at NIST, Rapid Prototyp J, 10.1108/RPJ-11-2015-0161 Matthews, 2016, Denudation of metal powder layers in laser powder bed fusion processes, Acta Mater, 10.1016/j.actamat.2016.05.017 Ly, 2017, Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing, Sci Rep, 10.1038/s41598-017-04237-z Scipioni Bertoli, 2017, In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing, Mater Des, 10.1016/j.matdes.2017.09.044 Bidare, 2017, An open-architecture metal powder bed fusion system for in-situ process measurements, Addit Manuf Bidare, 2018, Fluid and particle dynamics in laser powder bed fusion, Acta Mater, 10.1016/j.actamat.2017.09.051 Trapp, 2017, In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing, Appl Mater Today, 10.1016/j.apmt.2017.08.006 Zhao, 2017, Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction, Sci Rep, 7, 1 Bobel, 2019, In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion, Materialia, 10.1016/j.mtla.2019.100306 Guo, 2018, Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging, Acta Mater, 10.1016/j.actamat.2018.03.036 Guo, 2019, In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process, Addit Manuf Guo, 2020, In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing, Addit Manuf Leung, 2018, In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing, Nat Commun Martin, 2019, Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging, Mater Today Adv, 10.1016/j.mtadv.2019.01.001 Wolff, 2019, In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing, Sci Rep, 10.1038/s41598-018-36678-5 Khairallah, 2016, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater, 108, 36, 10.1016/j.actamat.2016.02.014 Xia, 2016, Selective laser melting 3D printing of ni-based superalloy: understanding thermodynamic mechanisms, Sci Bull, 10.1007/s11434-016-1098-7 Lu, 2018, Phase field simulation of powder bed-based additive manufacturing, Acta Mater Bugeda, 1999, Numerical prediction of temperature and density distributions in selective laser sintering processes, Rapid Prototyp J Rai, 2009, Heat transfer and fluid flow during electron beam welding of 21Cr-6Ni-9Mn steel and ti-6Al-4V alloy, J Phys D Appl Phys, 10.1088/0022-3727/42/2/025503 Körner, 2011, Mesoscopic simulation of selective beam melting processes, J Mater Process Technol, 211, 978, 10.1016/j.jmatprotec.2010.12.016 Li, 2021, A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process, Powder Technol Khorasani, 2019, The effect of SLM process parameters on density, hardness, tensile strength and surface quality of ti-6Al-4V, Addit Manuf, 25, 176 Read, 2015, Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development, Mater Des, 65, 417, 10.1016/j.matdes.2014.09.044 Sadowski, 2016, Optimizing quality of additively manufactured inconel 718 using powder bed laser melting process, Addit Manuf, 11, 60 Zhang, 2019, An experimental study of tensile property variability in selective laser melting, J Manuf Process, 43, 26, 10.1016/j.jmapro.2019.03.045 Zhang, 2014, Characterization of stainless steel parts by laser metal deposition shaping, Mater Des, 55, 104, 10.1016/j.matdes.2013.09.006 Kasperovich, 2016, Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting, Mater Des, 105, 160, 10.1016/j.matdes.2016.05.070 Mongomery, 2017 Wei, 2020, Mechanical properties of invar 36 alloy additively manufactured by selective laser melting, Mater Sci Eng A, 10.1016/j.msea.2019.138799 Kotsiantis, 2007, Supervised machine learning: a review of classification techniques, Inform, 31, 249 Alloghani, 2020, A systematic review on supervised and unsupervised machine learning algorithms for data science, Supervised Unsupervised Learn Data Sci, 3, 10.1007/978-3-030-22475-2_1 Wang, 2020, Machine learning in additive manufacturing: state-of-the-art and perspectives, Addit Manuf, 101538 Meng, 2020, Machine learning in additive manufacturing: a review, JOM, 72, 2363, 10.1007/s11837-020-04155-y Baumann, 2018, Trends of machine learning in additive manufacturing, Int J Rapid Manuf, 7, 310, 10.1504/IJRAPIDM.2018.095788 DebRoy, 2021, Metallurgy, mechanistic models and machine learning in metal printing, Nat Rev Mater, 6, 48, 10.1038/s41578-020-00236-1 Qi, 2019, Applying neural-network-based machine learning to additive manufacturing: current applications, challenges, and future perspectives, Engineering, 5, 721, 10.1016/j.eng.2019.04.012 Zhu, 2018, Machine learning in tolerancing for additive manufacturing, CIRP Ann, 67, 157, 10.1016/j.cirp.2018.04.119 Kouraytem, 2021, Modeling process–structure–property relationships in metal additive manufacturing: a review on physics-driven versus data-driven approaches, J Phys Mater, 4, 10.1088/2515-7639/abca7b Johnson, 2020, Machine learning for materials developments in metals additive manufacturing, Appl Phys Kanungo, 2002, An efficient k-means clustering algorithms: analysis and implementation, IEEE Trans Pattern Anal Mach Intell, 24, 881, 10.1109/TPAMI.2002.1017616 Awad, 2015 Wang, 2005, Gaussian process dynamical models, Adv Neural Inf Process Syst, 1441 Belgiu, 2016, Random forest in remote sensing: a review of applications and future directions, ISPRS J Photogramm Remote Sens, 10.1016/j.isprsjprs.2016.01.011 Krizhevsky, 2017, ImageNet classification with deep convolutional neural networks, Commun ACM, 10.1145/3065386 Hassoun, 2005, Fundamentals of artificial neural networks, Proc IEEE, 84, 906, 10.1109/JPROC.1996.503146 Y Ouali C Hudelot M. Tami An overview of deep semi-supervised learning n.d. Ogoke, 2021, Thermal control of laser powder bed fusion using deep reinforcement learning, Additive Manufacturing, 46, 10.1016/j.addma.2021.102033 Mnih, 2016, Asynchronous methods for deep reinforcement learning, 4, 2850 Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004 Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J Alloys Compd, 541, 177, 10.1016/j.jallcom.2012.07.022 Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall Mater Trans A Phys Metall Mater Sci, 42, 3190, 10.1007/s11661-011-0731-y Gong, 2014, Analysis of defect generation in ti-6Al-4V parts made using powder bed fusion additive manufacturing processes, Addit Manuf, 1, 87 Aoyagi, 2019, Simple method to construct process maps for additive manufacturing using a support vector machine, Addit Manuf, 27, 353 Zhu, 2021, Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks, Comput Mech, 67, 619, 10.1007/s00466-020-01952-9 Heigel, 2018, Measurement of the melt Pool length during single scan tracks in a commercial laser powder bed fusion process, J Manuf Sci Eng Trans ASME, 140, 10.1115/1.4037571 Gan, 2019, Benchmark study of thermal behavior, surface topography, and dendritic microstructure in selective laser melting of inconel 625, Integr Mater Manuf Innov, 8, 179, 10.1007/s40192-019-00130-x Lin, 2020, A conservative level set method on unstructured meshes for modeling multiphase thermo-fluid flow in additive manufacturing processes, Comput Methods Appl Mech Eng, 10.1016/j.cma.2020.113348 Yan, 2018, A fully coupled finite element formulation for liquid–solid–gas thermo-fluid flow with melting and solidification, Comput Methods Appl Mech Eng, 10.1016/j.cma.2018.03.017 Yan, 2018, Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing, Comput Mech, 10.1007/s00466-018-1539-z King, 2015, Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges, Appl Phys Rev, 2, 41304, 10.1063/1.4937809 King, 2014, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J Mater Process Technol, 214, 2915, 10.1016/j.jmatprotec.2014.06.005 King, 2015, Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory, Mater Sci Technol (United Kingdom), 31, 957, 10.1179/1743284714Y.0000000728 Gu, 2013, Influences of energy density on porosity and microstructure of selective laser melted 17–4PH stainless steel, 24th Int. SFF Symp. - An Addit. Manuf. Conf. SFF, 2013 Ning, 2019, Analytical modeling of lack-of-fusion porosity in metal additive manufacturing, Appl Phys A Mater Sci Process, 10.1007/s00339-019-3092-9 Kruth, 2004, Selective laser melting of iron-based powder, J Mater Process Technol, 10.1016/S0924-0136(04)00220-1 Tapia, 2018, Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel, Int J Adv Manuf Technol, 94, 3591, 10.1007/s00170-017-1045-z O’Hagan, 2011, Polynomial chaos: a tutorial and critique from a Statisticianís perspective, TonyohaganCoUk, 1 Tapia, 2016, Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models, Addit Manuf, 12, 282 Liu, 2021, A physics-informed machine learning model for porosity analysis in laser powder bed fusion additive manufacturing, Int J Adv Manuf Technol, 113, 1, 10.1007/s00170-021-06640-3 Paulson, 2020, Correlations between thermal history and keyhole porosity in laser powder bed fusion, Addit Manuf, 34 Luo, 2021, Pore-affected fatigue life scattering and prediction of additively manufactured inconel 718: an investigation based on miniature specimen testing and machine learning approach, Mater Sci Eng A, 802, 10.1016/j.msea.2020.140693 Muhammad, 2021, A machine learning framework to predict local strain distribution and the evolution of plastic anisotropy & fracture in additively manufactured alloys, Int J Plast, 136, 10.1016/j.ijplas.2020.102867 Liu, 2020, Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: new microstructure description indices and fracture mechanisms, Acta Mater, 201, 316, 10.1016/j.actamat.2020.10.010 Zhang, 2019, High cycle fatigue life prediction of laser additive manufactured stainless steel: a machine learning approach, Int J Fatigue, 128, 10.1016/j.ijfatigue.2019.105194 Garg, 2015, A new computational intelligence approach in formulation of functional relationship of open porosity of the additive manufacturing process, Int J Adv Manuf Technol, 80, 555, 10.1007/s00170-015-6989-2 Silbernagel, 2019, Using machine learning to aid in the parameter optimisation process for metal-based additive manufacturing, Rapid Prototyp J, 26, 625, 10.1108/RPJ-08-2019-0213 Özel, 2020, Focus variation measurement and prediction of surface texture parameters using machine learning in laser powder bed fusion, J Manuf Sci Eng, 142, 10.1115/1.4045415 Singh, 2012, Modelling of direct metal laser sintering of EOS DM20 bronze using neural networks and genetic algorithms, Proc. 37th Int. MATADOR 2012 Conf., 395 Zhan, 2021, Machine learning based fatigue life prediction with effects of additive manufacturing process parameters for printed SS 316L, Int J Fatigue, 142, 10.1016/j.ijfatigue.2020.105941 Zhan, 2021, A novel approach based on the elastoplastic fatigue damage and machine learning models for life prediction of aerospace alloy parts fabricated by additive manufacturing, Int J Fatigue, 145, 10.1016/j.ijfatigue.2020.106089 Rankouhi, 2021, Compositional grading of a 316L-cu multi-material part using machine learning for the determination of selective laser melting process parameters, Addit Manuf, 38 Barrionuevo, 2021, Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting, Int J Addit Subtractive Mater Manuf, 113, 419 Wan, 2019, Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens, J Mater Sci Technol, 10.1016/j.jmst.2018.12.011 Johnson, 2019, Assessing printability maps in additive manufacturing of metal alloys, Acta Mater, 176, 199, 10.1016/j.actamat.2019.07.005 Kempen, 2015, Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation, Mater Sci Technol (United Kingdom), 31, 917, 10.1179/1743284714Y.0000000702 Kempen, 2011, Process optimization and microstructural analysis for selective laser melting of AlSi10Mg, 22, 484 Kempen, 2012, Mechanical properties of AlSi10Mg produced by selective laser melting, Phys Procedia, 39, 439, 10.1016/j.phpro.2012.10.059 Tang, 2017, Anisotropic mechanical behavior of AlSi10Mg parts produced by selective laser melting, JOM, 69, 516, 10.1007/s11837-016-2230-5 Aboulkhair, 2016, The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment, Mater Sci Eng A, 667, 139, 10.1016/j.msea.2016.04.092 Calignano, 2013, Influence of process parameters on surface roughness of aluminum parts produced by DMLS, Int J Adv Manuf Technol, 67, 2743, 10.1007/s00170-012-4688-9 Liu, 2018, Microstructural characterization of cellular AlSi10Mg alloy fabricated by selective laser melting, Mater Des, 157 Raus, 2017, Mechanical and physical properties of AlSi10Mg processed through selective laser melting, AIP Conf Proc, 1831, 10.1063/1.4981168 Wang, 2017, Characterisation of structural properties for AlSi10Mg alloys fabricated by selective laser melting, Mater Sci Technol (United Kingdom), 33, 2274, 10.1080/02670836.2017.1398513 Majeed, 2019, An investigation into the influence of processing parameters on the surface quality of AlSi10Mg parts by SLM process, 143 Salmi, 2017, Experimental analysis of residual stresses on AlSi10Mg parts produced by means of selective laser melting (SLM), Procedia CIRP, 62, 458, 10.1016/j.procir.2016.06.030 Manfredi, 2013, From powders to dense metal parts: characterization of a commercial alsimg alloy processed through direct metal laser sintering, Materials (Basel), 6, 856, 10.3390/ma6030856 Vassilopoulos, 2008, Adaptive neuro-fuzzy inference system in modelling fatigue life of multidirectional composite laminates, Comput Mater Sci, 43, 1086, 10.1016/j.commatsci.2008.02.028 Mehrpouya, 2021, The prediction model for additively manufacturing of NiTiHf high-temperature shape memory alloy, Mater Today Commun, 26 Grasso, 2017, Process defects and in situ monitoring methods in metal powder bed fusion: a review, Meas Sci Technol, 28, 10.1088/1361-6501/aa5c4f Yadav, 2020, In situ monitoring systems of the SLM process: on the need to develop machine learning models for data processing, Crystals, 10, 524, 10.3390/cryst10060524 Mahmoudi, 2019, Layerwise anomaly detection in laser powder-bed fusion metal additive manufacturing, J Manuf Sci Eng Trans ASME, 141, 10.1115/1.4042108 Khanzadeh, 2018, Porosity prediction: supervised-learning of thermal history for direct laser deposition, J Manuf Syst, 47, 69, 10.1016/j.jmsy.2018.04.001 Mitchell, 2020, Linking pyrometry to porosity in additively manufactured metals, Addit Manuf, 31 Kwon, 2020, A deep neural network for classification of melt-pool images in metal additive manufacturing, J Intell Manuf, 31, 376, 10.1007/s10845-018-1451-6 Baumgartl, 2020, A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring, Prog Addit Manuf, 5, 277, 10.1007/s40964-019-00108-3 Elwarfalli, 2019, In situ process monitoring for laser-powder bed fusion using convolutional neural networks and infrared tomography, 2019, 323 Kunkel, 2019, Quality assurance in metal powder bed fusion via deep-learning-based image classification, Rapid Prototyp J, 26, 259, 10.1108/RPJ-03-2019-0066 Ye, 2018, In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks, ISA Trans, 81, 96, 10.1016/j.isatra.2018.07.021 Repossini, 2017, On the use of spatter signature for in-situ monitoring of laser powder bed fusion, Addit Manuf, 16, 35 Gobert, 2018, Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging, Addit Manuf, 21, 517 Colosimo, 2018, Spatially weighted PCA for monitoring video image data with application to additive manufacturing, J Qual Technol, 50, 391, 10.1080/00224065.2018.1507563 Grasso, 2017, In-process monitoring of selective laser melting: spatial detection of defects via image data analysis, J Manuf Sci Eng Trans ASME, 139, 10.1115/1.4034715 Zhang, 2020, Powder-bed fusion process monitoring by machine vision with hybrid convolutional neural networks, IEEE Trans Ind Informatics, 16, 5769, 10.1109/TII.2019.2956078 Mojahed Yazdi, 2020, A hybrid deep learning model of process-build interactions in additive manufacturing, J Manuf Syst, 57, 460, 10.1016/j.jmsy.2020.11.001 Caggiano, 2019, Machine learning-based image processing for on-line defect recognition in additive manufacturing, CIRP Ann, 68, 451, 10.1016/j.cirp.2019.03.021 Scime, 2018, Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm, Addit Manuf, 19, 114 Scime, 2018, A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process, Addit Manuf, 24, 273 Scime, 2019, Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process, Addit Manuf, 25, 151 Gaikwad, 2020, Heterogeneous sensing and scientific machine learning for quality assurance in laser powder bed fusion – a single-track study, Addit Manuf, 36 Shevchik, 2018, Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks, Addit Manuf, 21, 598 Shevchik, 2019, Deep learning for in situ and real-time quality monitoring in additive manufacturing using acoustic emission, IEEE Trans Ind Informatics, 15, 5194, 10.1109/TII.2019.2910524 Snow, 2021, Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning, J Manuf Syst, 59, 12, 10.1016/j.jmsy.2021.01.008 S Larsen PA Hooper. Deep semi-supervised learning of dynamics for anomaly detection in laser powder bed fusion n.d. doi:10.1007/s10845-021-01842-8. Lin, 2019, Quality analysis method for powder deposited layers applicable to selective laser sintering and selective laser melting processes, J Laser Appl, 31, 022306, 10.2351/1.5096144 Terry, 2019, Active monitoring of the selective laser melting process using an artificial neural net classifier on layer-by-layer surface profile data. MS T 2019, Mater. Sci. Technol., 2019, 60 Zhang, 2018, Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring, Mater Des, 156, 458, 10.1016/j.matdes.2018.07.002 Pandiyan, 2020, Analysis of time, frequency and time-frequency domain features from acoustic emissions during laser powder-bed fusion process, Procedia CIRP, 94, 392, 10.1016/j.procir.2020.09.152 Ye, 2018, Defect detection in selective laser melting technology by acoustic signals with deep belief networks, Int J Adv Manuf Technol, 96, 2791, 10.1007/s00170-018-1728-0 Mohammadi, 2020, Real time monitoring in L-PBF using a machine learning approach, Procedia Manuf, 51, 725, 10.1016/j.promfg.2020.10.102 Pandiyan, 2021, Semi-supervised monitoring of laser powder bed fusion process based on acoustic emissions, Virtual Phys Prototyp, 1 Uhlmann, 2017, Intelligent pattern recognition of SLM machine energy data, J Mach Eng, 17, 65 Uhlmann, 2018, Cluster identification of sensor data for predictive maintenance in a selective laser melting machine tool, Procedia Manuf, 24, 60, 10.1016/j.promfg.2018.06.009 Colosimo, 2020, In-situ monitoring in L-PBF: opportunities and challenges, Procedia CIRP, 94, 388, 10.1016/j.procir.2020.09.151 Lu, 2018, Monitoring temperature in additive manufacturing with physics-based compressive sensing, J Manuf Syst, 48, 60, 10.1016/j.jmsy.2018.05.010 Amini, 2019, A cybermanufacturing and AI framework for laser powder bed fusion (LPBF) additive manufacturing process, Manuf Lett, 21, 41, 10.1016/j.mfglet.2019.08.007 Bonnard, 2019, Hierarchical object-oriented model (HOOM) for additive manufacturing digital thread, J Manuf Syst, 50, 36, 10.1016/j.jmsy.2018.11.003 Caltanissetta, 2018, Characterization of in-situ measurements based on layerwise imaging in laser powder bed fusion, Addit Manuf, 24, 183 Gaikwad, 2020, Toward the digital twin of additive manufacturing: integrating thermal simulations, sensing, and analytics to detect process faults, IISE Trans, 52, 1204, 10.1080/24725854.2019.1701753 Shin, 2020, Optimizing laser powder bed fusion of ti-5Al-5V-5Mo-3Cr by artificial intelligence, J Alloys Compd Kappes, 2018, Machine learning to optimize additive manufacturing parameters for laser powder bed fusion of inconel 718, Miner Met Mater Ser, 595 Criales, 2017, Predictive modeling and optimization of multi-track processing for laser powder bed fusion of nickel alloy 625, Addit Manuf, 13, 14 Halsey, 2020, Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing, Addit Manuf, 101354 Asadi, 2021, Gaussian Process (GP)-based Learning Control of Selective Laser Melting Process, 508 Reiff, 2021, Learning feedforward control for laser powder bed fusion, Procedia CIRP, 127, 10.1016/j.procir.2021.01.064 Shipley, 2018, Optimisation of process parameters to address fundamental challenges during selective laser melting of ti-6Al-4V: a review, Int J Mach Tool Manuf, 128, 1, 10.1016/j.ijmachtools.2018.01.003 Baturynska, 2018, Optimization of process parameters for powder bed fusion additive manufacturing by combination of machine learning and finite element method: a conceptual framework, Procedia CIRP, 67, 227, 10.1016/j.procir.2017.12.204 Yuan, 2020, Intelligent optimization system for powder bed fusion of processable thermoplastics, Addit Manuf, 34 Meng, 2020, Process Design of Laser Powder bed Fusion of stainless steel using a Gaussian process-based machine learning model, JOM, 72, 420, 10.1007/s11837-019-03792-2 Saadlaoui, 2017, Topology optimization and additive manufacturing: comparison of conception methods using industrial codes, J Manuf Syst, 43, 178, 10.1016/j.jmsy.2017.03.006 Mondal, 2020, Investigation of melt pool geometry control in additive manufacturing using hybrid modeling, Metals (Basel), 10, 683, 10.3390/met10050683 Druzgalski, 2020, Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing, Addit Manuf, 34 Liu, 2020, Machine learning-enabled feedback loops for metal powder bed fusion additive manufacturing, Procedia Comput Sci, 176, 2586, 10.1016/j.procs.2020.09.314 Jin, 2017, Optimization of process planning for reducing material consumption in additive manufacturing, J Manuf Syst, 44, 65, 10.1016/j.jmsy.2017.05.003 Nagarajan, 2018, Characterizing the influence of resource-energy-exergy factors on the environmental performance of additive manufacturing systems, J Manuf Syst, 48, 87, 10.1016/j.jmsy.2018.06.005 Chan, 2018, Data-driven cost estimation for additive manufacturing in cybermanufacturing, J Manuf Syst, 46, 115, 10.1016/j.jmsy.2017.12.001 Vlasea, 2020, Development of powder bed fusion additive manufacturing test bed for enhanced real-time process control, 13