Process chain modeling and selection in an additive manufacturing context

Kruth, 1991, Material Increase Manufacturing by Rapid Prototyping Techniques, CIRP Annals – Manufacturing Technology, 40, 603, 10.1016/S0007-8506(07)61136-6 Kruth, 1998, Progress in Additive Manufacturing and Rapid Prototyping, CIRP Annals – Manufacturing Technology, 47, 525, 10.1016/S0007-8506(07)63240-5 Zhang, 2014, An Integrated Decision-Making Model for Multi-Attributes Decision-Making (MADM) Problems in Additive Manufacturing Process Planning, Rapid Prototyping Journal, 20, 377, 10.1108/RPJ-01-2013-0009 Westkämper, 1994, Zero-Defect Manufacturing by Means of a Learning Supervision of Process Chains, CIRP Annals – Manufacturing Technology, 43, 405, 10.1016/S0007-8506(07)62240-9 Denkena, 2006, Methodology for Dimensioning Technological Interfaces of Manufacturing Process Chains, CIRP Annals – Manufacturing Technology, 55, 497, 10.1016/S0007-8506(07)60467-3 Goch, 2009, Holonic Quality Control Strategy for the Process Chain of Bearing Rings, CIRP Annals – Manufacturing Technology, 58, 433, 10.1016/j.cirp.2009.03.037 Lovatt, 1998, Manufacturing Process Selection in Engineering Design. Part 1: The Role of Process Selection, Materials & Design, 19, 205, 10.1016/S0261-3069(98)00038-7 Lovatt, 1998, Manufacturing Process Selection in Engineering Design. Part 2: A Methodology for Creating Task-Based Process Selection Procedures, Materials & Design, 19, 217, 10.1016/S0261-3069(98)00039-9 Shercliff, 2001, Selection of Manufacturing Processes in Design and the Role of Process Modelling, Progress in Materials Science, 46, 429, 10.1016/S0079-6425(00)00013-X Brecher, 2006, Closed-Loop CAPP/CAM/CNC Process Chain Based on STEP and STEP-NC Inspection Tasks, International Journal of Computer Integrated Manufacturing, 19, 570, 10.1080/09511920600622064 Domazet, 1992, Concurrent Design and Process Planning of Rotational Parts, CIRP Annals – Manufacturing Technology, 41, 181, 10.1016/S0007-8506(07)61180-9 Herman, 1993, An Opportunistic Approach to Process Planning Within a Concurrent Engineering Environment, CIRP Annals – Manufacturing Technology, 42, 545, 10.1016/S0007-8506(07)62505-0 Eversheim, 1995, A Methodology for an Integrated Design and Process Planning Based on a Concurrent Engineering Reference Model, CIRP Annals – Manufacturing Technology, 44, 403, 10.1016/S0007-8506(07)62351-8 Hansen, 2006, Dimensional Micro and Nano Metrology, CIRP Annals – Manufacturing Technology, 55, 721, 10.1016/j.cirp.2006.10.005 Hansen, 2011, Replication of Micro and Nano Surface Geometries, CIRP Annals – Manufacturing Technology, 60, 695, 10.1016/j.cirp.2011.05.008 Hansen, 2007, Complex Process Chains for Manufacturing of Invisible Displays Integrated in Bulk Metal Panels, CIRP Annals – Manufacturing Technology, 56, 237, 10.1016/j.cirp.2007.05.056 Bauer, 2002, Development of a Rapid Prototyping Process Chain for the Production of Ceramic Microcomponents, Journal of Materials Science, 37, 3127, 10.1023/A:1016150126206 Zoch, 2006, From Single Production Step to Entire Process Chain – The Global Approach of Distortion Engineering, Materialwissenschaft und Werkstofftechnik, 37, 6, 10.1002/mawe.200500958 Klein, 2006, Using Indicators to Describe Distortion Along a Process Chain, Materialwissenschaft und Werkstofftechnik, 37, 19, 10.1002/mawe.200500956 Kreis, 2001, Manufacturing System for the Integrated Hydroforming, Trimming and Welding of Sheet Metal Pairs, Journal of Materials Processing Technology, 115, 49, 10.1016/S0924-0136(01)00763-4 Calaon, 2012, Experimental Investigation of New Manufacturing Process Chains to Create Micro-Metal Structures on Polymer Substrates for lab-on-Chip Sensors, The International Journal of Advanced Manufacturing Technology, 59, 101, 10.1007/s00170-011-3468-2 Dumas, 2005 Islam, 2008 Islam, 2009, Process Chains for the Manufacturing of Molded Interconnect Devices, The International Journal of Advanced Manufacturing Technology, 42, 831, 10.1007/s00170-008-1660-9 EnvisionTEC, 2015 EnvisionTEC, 2015 EnvisionTEC, 2015 HwaYu Plastic Co, 2015 Lithoz GmbH, 2015 JCGM 100:2008, 2008, Guide to the Expression of Uncertainty in Measurement (GUM). ISO 15530 part 3, 2011, Geometrical Product Specifications (GPS) – Coordinate Measuring Machine (CMM): techniques for determining the uncertainty of measurement – Part 3: Use of calibrated workpieces or standards. KOBA Kalibrierlaboratorium, 2008 Gasparin, 2012 Colton, 2001, Failure of Rapid Prototype Molds During injection Molding, CIRP Annals – Manufacturing Technology, 50, 129, 10.1016/S0007-8506(07)62087-3