Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process

Ambrogio G et al (2004) Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation. J Mater Process Technol 153:501–507

Ambrogio G et al (2007) An analytical model for improving precision in single point incremental forming. J Mater Process Technol 191(1):92–95

Asemabadi M, Sedighi M, Honarpisheh M (2012) Investigation of cold rolling influence on the mechanical properties of explosive-welded Al/Cu bimetal. Mater Sci Eng: A 558:144–149

Ashani JZ, Bagheri SM (2009) Explosive scarf welding of aluminum to copper plates and their interface properties. Materialwiss Werkstofftech 40(9):690–698

Azaouzi M, Nadhir L (2012) Tool path optimization for single point incremental sheet forming using response surface method. Simul Model Pract Theory 24:49–58

Bagudanch I et al (2013) Forming force in single point incremental forming under different bending conditions. Procedia Eng 63:354–360

Bahloul R, Arfa H, Salah HB (2013) Application of response surface analysis and genetic algorithm for the optimization of single point incremental forming process. Key Eng Mater 554:1265–1272

Duflou J et al (2007) Experimental study on force measurements for single point incremental forming. J Mater Process Technol 189(1):65–72

Durgutlu Ahmet, Gülenç Behçet, Findik Fehim (2005) Examination of copper/stainless steel joints formed by explosive welding. Mater Des 26(6):497–507

Fratini L et al (2004) Influence of mechanical properties of the sheet material on formability in single point incremental forming. CIRP Ann Manuf Technol 53(1):207–210

Gatea S, Ou H, McCartney G (2016) Review on the influence of process parameters in incremental sheet forming. Int J Adv Manuf Technol 87(1):479–499

Honarpisheh M, Asemabadi M, Sedighi M (2012) Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer. Mater Des 37:122–127

Honarpisheh M, Abdolhoseini MJ, Amini S (2016a) Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4 V sheet using electrical current. Int J Adv Manuf Technol 83(9–12):2027–2037

Honarpisheh Mohammad, Niksokhan Javad, Nazari Farshad (2016b) Investigation of the effects of cold rolling on the mechanical properties of explosively-welded Al/St/Al multilayer sheet. Metallurgical Research & Technology 113(1):105

Honarpisheh M, Keimasi M, Alinaghian I (2018a) Numerical and experimental study on incremental forming process of Al/Cu bimetals: influence of process parameters on the forming force, dimensional accuracy and thickness variations. J Mech Mater Struct 13(1):35–51

Honarpisheh M, Mohammadi Jobedar M, Alinaghian I (2018b) Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology. Int J Adv Manuf Technol 96(9–12):3069–3080

Hussain G, Gao L, Dar NU (2007) An experimental study on some formability evaluation methods in negative incremental forming. J Mater Process Technol 186(1):45–53

Hussain G, Gao L, Zhang ZY (2008) Formability evaluation of a pure titanium sheet in the cold incremental forming process. Int J Adv Manuf Technol 37(9-10):920–926

Iseki H (2001) An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller. J Mater Process Technol 111(1):150–154

Kahraman Nizamettin, Gülenç Behçet, Findik Fehim (2005) Joining of titanium/stainless steel by explosive welding and effect on interface. J Mater Process Technol 169(2):127–133

Kim YH, Park JJ (2002) Effect of process parameters on formability in incremental forming of sheet metal. J Mater Process Technol 130:42–46

Le VS, Ghiotti A, Lucchetta G (2008) Preliminary studies on single point incremental forming for thermoplastic materials. Int J Mater Form 1(1):1179–1182

Li J, Geng P, Shen J (2013) Numerical simulation and experimental investigation of multistage incremental sheet forming. Int J Adv Manuf Technol 68(9–12):2637–2644

Liu Z et al (2014) Taguchi optimization of process parameters for forming time in incremental sheet forming process. Mater Sci Forum 773774:773–774

Majagi SD, Chandramohan G (2014) Optimization of incremental sheet metal forming parameters by design of experiments. Appl Mech Mater 527

Mirnia MJ et al (2014) An investigation into thickness distribution in single point incremental forming using sequential limit analysis. IntJ Mater Form 7(4):469–477

Raghukandan K (2003) Analysis of the explosive cladding of cu–low carbon steel plates. J Mater Process Technol 139(1):573–577

Sakhtemanian MR, Honarpisheh M, Amini S (2018) Numerical and experimental study on the layer arrangement in the incremental forming process of explosive-welded low-carbon steel/CP-titanium bimetal sheet. Int J Adv Manuf Technol 95(9–12):3781–3796

Sedighi M, Honarpisheh M (2012) Investigation of cold rolling influence on near surface residual stress distribution in explosive welded multilayer. Strength Mater 44(6):693–698

Shanmuganatan SP, Senthil Kumar. VS (2014) Modeling of incremental forming process parameters of Al 3003 (O) by response surface methodology. Procedia Eng 97:346–356

Shi X, Hussain G, Guangcheng Z, Wu M, Kong F (2014) Study on formability of vertical parts formed by multi-stage incremental forming. Int J Adv Manuf Technol 75(5–8):1049–1053

Vanhove H et al (2010) An experimental study of twist phenomena in single point incremental forming. IntJ Mater Form 3(1):975–978

Ziran X, Gao L, Hussain G, Cui Z (2010) The performance of flat end and hemispherical end tools in single-point incremental forming. Int J Adv Manuf Technol 46(9–12):1113–1118