Problem of modeling hardening in the theory of flow
Tóm tắt
An analysis of relationships used to define isotropic and kinematic hardening in a theory of flow previously proposed by the author is presented. Familiar hardening laws are obtained using appropriate simplifications of the relationships examined.
Tài liệu tham khảo
V. S. Gudramovich, V. P. Gerasimov, V. S. Konovalenkov, and V. P. Poshivalov, Limiting States of Shells Subjected to a Complex Stressed State and Material Creep [in Russian], Naukova Dumka, Kiev (1984).
L. M. Kachanov, Fundamentals of Plasticity Theory [in Russian], Nauka, Moscow (1969).
N. N. Malinin, Applied Theory of Plasticity and C eep [in Russian], Mashinostroenie, Moscow (1975).
Yu. N. Shevchenko and R. G. Terekhov, Physical Equations of Thermoviscoplasticity [in Russian], Naukova Dumka, Kiev (1982).
P. P. Lepikhin, “A flow theory that accounts for the effects of complex dynamic loading”, Probl. Prochn., No. 1, 51–54 (1989).
Yu. I. Kadashevich and V. V. Novozhilov, “A plasticity theory that accounts for fundamental microstresses” Prikl. Mat. Mekh.,22, No. 1, 78–89 (1958).
A. Yu. Ishlinskii, “General theory of plasticity with linear hardening”, Ukr. Mat. Zh.,6, No. 3, 314–324 (1954).
D. Drucker, “The significance of the criterion for additional plastic deformation of metals”, J. Colloid Sci.,4, No. 4, 299–311 (1949).
F. Stoktam and D. Drucker, “Fitting mathematical theories of plasticity to experimental results”, J. Colloid Sci.,5, No. 1, 1–3 (1950).
F. Edelman and D. Drucker, “Some extension of elementary plasticity theory”, J. Franklin Inst.,251, No. 6, 251–253 (1951).
W. Prager, “The theory of plasticity. A survey of recent achievements”, Proc. Inst. Mech. Eng.,169, No. 21, 41–57 (1955).
W. Prager, Problems of Plasticity Theory [Russian translation], Fizmatgiz, Moscow (1958).
P. P. Lepikhin, “Modeling of elastoplastic processes of deformation along paths in the form of two-segment broken lines”, Probl. Prochn., No. 7, 712 (1989).
R. A. Arutyunyan, “On the cyclic loading of an elastoplastic medium”, Izv. Akad. Nauk SSSR. Ser. Mekh. Mashinostr., No. 4, 89–91 (1964).
R. A. Arutyunyan and A. A. Vakulenko, “On the multiple loading of an elastoplastic medium”, Izv. Akad. Nauk SSSR. Ser. Mekh.,37, No. 4, 53–61 (1965).
Hoyle, and Malvern, “Simple waves in the biaxial plastic state during hardening with combined transfer and expansion of the load surface”, Prikl. Mekh., No. 4, 196–203 (1970).
W. Prager, “A new method of analyzing stresses and strains in work-hardening plastic solids”, J. Appl. Mech., Trans. Am. Soc. Mech. Eng.,23, No. 5, 493–496 (1956).
G. Zeigler, “Modification of Prager's hardening law”, Mekh: Period. Sb. Per. Inostr. St., No. 2, 85–95 (1960).