Printing New Bones: From Print-and-Implant Devices to Bioprinted Bone Organ Precursors

Abdulghani, 2019, Biofabrication for osteochondral tissue regeneration: bioink printability requirements, J. Mater. Sci. Mater. Med., 30, 20, 10.1007/s10856-019-6218-x Ashammakhi, 2019, Advancing frontiers in bone bioprinting, Adv. Healthc. Mater., 8 Cidonio, 2019, The cell in the ink: improving biofabrication by printing stem cells for skeletal regenerative medicine, Biomaterials, 209, 10, 10.1016/j.biomaterials.2019.04.009 Daly, 2017, 3D bioprinting for cartilage and osteochondral tissue engineering, Adv. Healthc. Mater., 6, 22, 10.1002/adhm.201700298 Dhawan, 2019, Three-dimensional bioprinting for bone and cartilage restoration in orthopaedic surgery, J. Am. Acad. Orthop. Surg., 27, e215, 10.5435/JAAOS-D-17-00632 Hernández-González, 2020, Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: a review, Carbohydr. Polym., 229, 10.1016/j.carbpol.2019.115514 Jiang, 2019, Three-dimensional printing and injectable conductive hydrogels for tissue engineering application, Tissue Eng. B Rev., 25, 398, 10.1089/ten.teb.2019.0100 Marques, 2019, Collagen-based bioinks for hard tissue engineering applications: a comprehensive review, J. Mater. Sci. Mater. Med., 30, 32, 10.1007/s10856-019-6234-x Midha, 2019, Advances in three-dimensional bioprinting of bone: progress and challenges, J. Tissue Eng. Regen. Med., 13, 925 Murphy, 2020, Opportunities and challenges of translational 3D bioprinting, Nat. Biomed. Eng., 4, 370, 10.1038/s41551-019-0471-7 Roseti, 2017, Scaffolds for bone tissue engineering: state of the art and new perspectives, Mater. Sci. Eng. C Mater. Biol. Appl., 78, 1246, 10.1016/j.msec.2017.05.017 Shahabipour, 2020, Key components of engineering vascularized 3-dimensional bioprinted bone constructs, Transl. Res., 216, 57, 10.1016/j.trsl.2019.08.010 Groll, 2018, A definition of bioinks and their distinction from biomaterial inks, Biofabrication, 11, 10.1088/1758-5090/aaec52 Visscher, 2016, Advances in bioprinting technologies for craniofacial reconstruction, Trends Biotechnol., 34, 700, 10.1016/j.tibtech.2016.04.001 Wang, 2014, Enzymatically synthesized inorganic polymers as morphogenetically active bone scaffolds: application in regenerative medicine, Int. Rev. Cell Mol. Biol., 313, 27, 10.1016/B978-0-12-800177-6.00002-5 Wang, 2020, Nanoscale 3D bioprinting for osseous tissue manufacturing, Int. J. Nanomedicine, 15, 215, 10.2147/IJN.S172916 Yang, 2016, Research advances of three-dimension printing technology in vertebrae and intervertebral disc tissue engineering, Zhejiang Da Xue Xue Bao Yi Xue Ban, 45, 141 Melke, 2016, Silk fibroin as biomaterial for bone tissue engineering, Acta Biomater., 31, 1, 10.1016/j.actbio.2015.09.005 Nulty, 2019, Bioinks and their applications in tissue engineering Mishra, 2016, The potential impact of bone tissue engineering in the clinic, Regen. Med., 11, 571, 10.2217/rme-2016-0042 Lyons, 2010, The healing of bony defects by cell-free collagen-based scaffolds compared to stem cell-seeded tissue engineered constructs, Biomaterials, 31, 9232, 10.1016/j.biomaterials.2010.08.056 Han, 2020, BMP-2 and hMSC dual delivery onto 3D printed PLA-Biogel scaffold for critical-size bone defect regeneration in rabbit tibia, Biomed. Mater., 16 Diomede, 2020, Functional relationship between osteogenesis and angiogenesis in tissue regeneration, Int. J. Mol. Sci., 21, 3242, 10.3390/ijms21093242 Meyers, 2018, Pericytes for therapeutic bone repair, Adv. Exp. Med. Biol., 1109, 21, 10.1007/978-3-030-02601-1_3 Meyers, 2021, Assessing the bone-forming potential of pericytes, Methods Mol. Biol., 2235, 127, 10.1007/978-1-0716-1056-5_9 Salehi-Nik, 2017, Buccal fat pad as a potential source of stem cells for bone regeneration: a literature review, Stem Cells Int., 2017, 10.1155/2017/8354640 Trubiani, 2019, Human oral stem cells, biomaterials and extracellular vesicles: a promising tool in bone tissue repair, Int. J. Mol. Sci., 20, 4987, 10.3390/ijms20204987 Bandyopadhyay, 2020, 3D printing for bone regeneration, Curr. Osteoporos. Rep., 18, 505, 10.1007/s11914-020-00606-2 Huang, 2017, 3D bioprinting and the current applications in tissue engineering, Biotechnol. J., 12, 10.1002/biot.201600734 Li, 2016, Recent advances in bioprinting techniques: approaches, applications and future prospects, J. Transl. Med., 14, 271, 10.1186/s12967-016-1028-0 Mandrycky, 2016, 3D bioprinting for engineering complex tissues, Biotechnol. Adv., 34, 422, 10.1016/j.biotechadv.2015.12.011 Qasim, 2019, Advancements and frontiers in nano-based 3D and 4D scaffolds for bone and cartilage tissue engineering, Int. J. Nanomedicine, 14, 4333, 10.2147/IJN.S209431 Su, 2021, Applications of 3D printed bone tissue engineering scaffolds in the stem cell field, Regen. Ther., 16, 63, 10.1016/j.reth.2021.01.007 Xing, 2020, 3D bioprinting for vascularized tissue-engineered bone fabrication, Materials (Basel), 13, 2278, 10.3390/ma13102278 Zheng, 2019, 3D bioprinting in orthopedics translational research, J. Biomater. Sci. Polym. Ed., 30, 1172, 10.1080/09205063.2019.1623989 Ma, 2018, 3D-printed bioceramic scaffolds: from bone tissue engineering to tumor therapy, Acta Biomater., 79, 37, 10.1016/j.actbio.2018.08.026 Huang, 2019, Three-dimensionally printed hyperelastic bone scaffolds accelerate bone regeneration in critical-size calvarial bone defects, Plast. Reconstr. Surg., 143, 1397, 10.1097/PRS.0000000000005530 Kim, 2018, Synergistic effects of beta tri-calcium phosphate and porcine-derived decellularized bone extracellular matrix in 3D-printed polycaprolactone scaffold on bone regeneration, Macromol. Biosci., 18, 10.1002/mabi.201800025 Lopez, 2018, Three dimensionally printed bioactive ceramic scaffold osseoconduction across critical-sized mandibular defects, J. Surg. Res., 223, 115, 10.1016/j.jss.2017.10.027 Luo, 2018, 3D printing of strontium-doped hydroxyapatite based composite scaffolds for repairing critical-sized rabbit calvarial defects, Biomed. Mater., 13, 10.1088/1748-605X/aad923 Shao, 2017, Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect, Biofabrication, 9, 10.1088/1758-5090/aa663c Shao, 2018, Custom repair of mandibular bone defects with 3D printed bioceramic scaffolds, J. Dent. Res., 97, 68, 10.1177/0022034517734846 Wang, 2019, Dipyridamole-loaded 3D-printed bioceramic scaffolds stimulate pediatric bone regeneration in vivo without disruption of craniofacial growth through facial maturity, Sci. Rep., 9 Roy, 2003, Performance of degradable composite bone repair products made via three-dimensional fabrication techniques, J. Biomed. Mater. Res. A, 66A, 283, 10.1002/jbm.a.10582 Freeman, 2019, Biofabrication of multiscale bone extracellular matrix scaffolds for bone tissue engineering, Eur. Cell Mater., 38, 168, 10.22203/eCM.v038a12 Buyuksungur, 2017, 3D printed poly(ε-caprolactone) scaffolds modified with hydroxyapatite and poly(propylene fumarate) and their effects on the healing of rabbit femur defects, Biomater. Sci., 5, 2144, 10.1039/C7BM00514H Chen, 2019, 3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration, Biomed. Mater., 14, 10.1088/1748-605X/ab388d Kwon, 2018, Bone regeneration by means of a three-dimensional printed scaffold in a rat cranial defect, J. Tissue Eng. Regen. Med., 12, 516, 10.1002/term.2532 Lai, 2019, Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect, Biomaterials, 197, 207, 10.1016/j.biomaterials.2019.01.013 Lee, 2019, Evaluation of mechanical strength and bone regeneration ability of 3D printed kagome-structure scaffold using rabbit calvarial defect model, Mater. Sci. Eng. C Mater. Biol. Appl., 98, 949, 10.1016/j.msec.2019.01.050 Nettleton, 2019, Molecular mass-dependent resorption and bone regeneration of 3D printed PPF scaffolds in a critical-sized rat cranial defect model, Adv. Healthc. Mater., 8, 10.1002/adhm.201900646 Song, 2018, Nano-biphasic calcium phosphate/polyvinyl alcohol composites with enhanced bioactivity for bone repair via low-temperature three-dimensional printing and loading with platelet-rich fibrin, Int. J. Nanomedicine, 13, 505, 10.2147/IJN.S152105 Trachtenberg, 2017, Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients, J. Biomater. Sci. Polym. Ed., 28, 532, 10.1080/09205063.2017.1286184 Won, 2016, Evaluation of 3D printed PCL/PLGA/β-TCP versus collagen membranes for guided bone regeneration in a beagle implant model, Biomed. Mater., 11, 10.1088/1748-6041/11/5/055013 Zhang, 2018, 3D-printed scaffolds of mesoporous bioglass/gliadin/polycaprolactone ternary composite for enhancement of compressive strength, degradability, cell responses and new bone tissue ingrowth, Int. J. Nanomedicine, 13, 5433, 10.2147/IJN.S164869 Jakus, 2016, Hyperelastic “bone”: a highly versatile, growth factor-free, osteoregenerative, scalable, and surgically friendly biomaterial, Sci. Transl. Med., 8, 10.1126/scitranslmed.aaf7704 Cheng, 2014, Decellularized tissue and cell-derived extracellular matrices as scaffolds for orthopaedic tissue engineering, Biotechnol. Adv., 32, 462, 10.1016/j.biotechadv.2013.12.012 Nyberg, 2017, Comparison of 3D-printed poly-ε-caprolactone scaffolds functionalized with tricalcium phosphate, hydroxyapatite, Bio-Oss, or decellularized bone matrix, Tissue Eng. A, 23, 503, 10.1089/ten.tea.2016.0418 Rindone, 2018, 3D-printing composite polycaprolactone-decellularized bone matrix scaffolds for bone tissue engineering applications, Methods Mol. Biol., 1577, 209, 10.1007/7651_2017_37 Boga, 2018, In vitro characterization of 3D printed scaffolds aimed at bone tissue regeneration, Colloids Surf. B Biointerfaces, 165, 207, 10.1016/j.colsurfb.2018.02.038 Gu, 2019, Three-dimensional printed Mg-doped β-TCP bone tissue engineering scaffolds: effects of magnesium ion concentration on osteogenesis and angiogenesis in vitro, Tissue Eng. Regen. Med., 16, 415, 10.1007/s13770-019-00192-0 Hermenean, 2017, Chitosan-graphene oxide 3D scaffolds as promising tools for bone regeneration in critical-size mouse calvarial defects, Sci. Rep., 7, 16641, 10.1038/s41598-017-16599-5 Zhang, 2019, Fabrication and application of novel porous scaffold in situ-loaded graphene oxide and osteogenic peptide by cryogenic 3D printing for repairing critical-sized bone defect, Molecules, 24, 1669, 10.3390/molecules24091669 Zou, 2020, Preparation of antibacterial and osteoconductive 3D-printed PLGA/Cu(I)@ZIF-8 nanocomposite scaffolds for infected bone repair, J. Nanobiotechnol., 18, 39, 10.1186/s12951-020-00594-6 Golafshan, 2020, Tough magnesium phosphate-based 3D-printed implants induce bone regeneration in an equine defect model, Biomaterials, 261, 10.1016/j.biomaterials.2020.120302 Chen, 2019, Biomimetic synthesis of Mg-substituted hydroxyapatite nanocomposites and three-dimensional printing of composite scaffolds for bone regeneration, J. Biomed. Mater. Res. A, 107, 2512, 10.1002/jbm.a.36757 Chiu, 2019, Effect of strontium substitution on the physicochemical properties and bone regeneration potential of 3D printed calcium silicate scaffolds, Int. J. Mol. Sci., 20, 2729, 10.3390/ijms20112729 Probst, 2010, Calvarial reconstruction by customized bioactive implant, Handchir. Mikrochir. Plast. Chir., 42, 369, 10.1055/s-0030-1248310 Habibovic, 2008, Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants, Biomaterials, 29, 944, 10.1016/j.biomaterials.2007.10.023 Müller, 2009, Bio-mimetic hollow scaffolds for long bone replacement, 74010D Barba, 2017, Osteoinduction by foamed and 3D-printed calcium phosphate scaffolds: effect of nanostructure and pore architecture, ACS Appl. Mater. Interfaces, 9, 41722, 10.1021/acsami.7b14175 Bohner, 2019, A proposed mechanism for material-induced heterotopic ossification, Mater. Today, 22, 132, 10.1016/j.mattod.2018.10.036 McKay, 2007, A comprehensive clinical review of recombinant human bone morphogenetic protein-2 (INFUSE Bone Graft), Int. Orthop., 31, 729, 10.1007/s00264-007-0418-6 Kanakaris, 2009, Application of bone morphogenetic proteins to femoral non-unions: a 4-year multicentre experience, Injury, 40, S54, 10.1016/S0020-1383(09)70013-0 Epstein, 2013, Complications due to the use of BMP/INFUSE in spine surgery: the evidence continues to mount, Surg. Neurol. Int., 4, S343, 10.4103/2152-7806.114813 Lykissas, 2017, Use of recombinant human bone morphogenetic protein-2 in spine surgery, World J. Orthop., 8, 531, 10.5312/wjo.v8.i7.531 Shields, 2006, Adverse effects associated with high-dose recombinant human bone morphogenetic protein-2 use in anterior cervical spine fusion, Spine, 31, 542, 10.1097/01.brs.0000201424.27509.72 Smucker, 2006, Increased swelling complications associated with off-label usage of rhBMP-2 in the anterior cervical spine, Spine, 31, 2813, 10.1097/01.brs.0000245863.52371.c2 Malda, 2013, 25th Anniversary article: engineering hydrogels for biofabrication, Adv. Mater., 25, 5011, 10.1002/adma.201302042 Murphy, 2014, 3D bioprinting of tissues and organs, Nat. Biotechnol., 32, 773, 10.1038/nbt.2958 Daly, 2016, A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage, Biofabrication, 8, 10.1088/1758-5090/8/4/045002 Daly, 2018, 3D printed microchannel networks to direct vascularisation during endochondral bone repair, Biomaterials, 162, 34, 10.1016/j.biomaterials.2018.01.057 Pufe, 2002, Quantitative measurement of the splice variants 120 and 164 of the angiogenic peptide vascular endothelial growth factor in the time flow of fracture healing: a study in the rat, Cell Tissue Res., 309, 387, 10.1007/s00441-002-0605-0 Uchida, 2003, Vascular endothelial growth factor is expressed along with its receptors during the healing process of bone and bone marrow after drill-hole injury in rats, Bone, 32, 491, 10.1016/S8756-3282(03)00053-X Uludag, 1999, Characterization of rhBMP-2 pharmacokinetics implanted with biomaterial carriers in the rat ectopic model, J. Biomed. Mater. Res., 46, 193, 10.1002/(SICI)1097-4636(199908)46:2<193::AID-JBM8>3.0.CO;2-1 Cho, 2002, Differential temporal expression of members of the transforming growth factor beta superfamily during murine fracture healing, J. Bone Miner. Res., 17, 513, 10.1359/jbmr.2002.17.3.513 Bouletreau, 2002, Hypoxia and VEGF up-regulate BMP-2 mRNA and protein expression in microvascular endothelial cells: implications for fracture healing, Plast. Reconstr. Surg., 109, 2384, 10.1097/00006534-200206000-00033 Ahlfeld, 2019, 3D plotted biphasic bone scaffolds for growth factor delivery: biological characterization in vitro and in vivo, Adv. Healthc. Mater., 8, 10.1002/adhm.201801512 Bao, 2017, 3D biomimetic artificial bone scaffolds with dual-cytokines spatiotemporal delivery for large weight-bearing bone defect repair, Sci. Rep., 7, 7814, 10.1038/s41598-017-08412-0 Chen, 2020, Assessment of the release of vascular endothelial growth factor from 3D-printed poly-ε-caprolactone/hydroxyapatite/calcium sulfate scaffold with enhanced osteogenic capacity, Polymers (Basel), 12, 1455, 10.3390/polym12071455 Chen, 2020, Evaluation of BMP-2 and VEGF loaded 3D printed hydroxyapatite composite scaffolds with enhanced osteogenic capacity in vitro and in vivo, Mater. Sci. Eng. C Mater. Biol. Appl., 112, 10.1016/j.msec.2020.110893 Cidonio, 2020, Nanoclay-based 3D printed scaffolds promote vascular ingrowth ex vivo and generate bone mineral tissue in vitro and in vivo, Biofabrication, 12, 10.1088/1758-5090/ab8753 Deng, 2019, Experimental study of rhBMP-2 chitosan nano-sustained release carrier-loaded PLGA/nHA scaffolds to construct mandibular tissue-engineered bone, Arch. Oral Biol., 102, 16, 10.1016/j.archoralbio.2019.03.023 Freeman, 2020, 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration, Sci. Adv., 6, 10.1126/sciadv.abb5093 Kim, 2018, Incorporation of BMP-2 nanoparticles on the surface of a 3D-printed hydroxyapatite scaffold using an ε-polycaprolactone polymer emulsion coating method for bone tissue engineering, Colloids Surf. B Biointerfaces, 170, 421, 10.1016/j.colsurfb.2018.06.043 Li, 2018, Fabrication of vascularized bone flaps with sustained release of recombinant human bone morphogenetic protein-2 and arteriovenous bundle, Tissue Eng. A, 24, 1413, 10.1089/ten.tea.2018.0002 Li, 2017, RhBMP-2 loaded 3D-printed mesoporous silica/calcium phosphate cement porous scaffolds with enhanced vascularization and osteogenesis properties, Sci. Rep., 7, 41331, 10.1038/srep41331 Poldervaart, 2014, Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture, J. Control. Release, 184, 58, 10.1016/j.jconrel.2014.04.007 Shim, 2014, Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit, Biomed. Mater., 9, 10.1088/1748-6041/9/6/065006 Li, 2017, Evaluation of 3D-printed polycaprolactone scaffolds coated with freeze-dried platelet-rich plasma for bone regeneration, Materials (Basel), 10, 831, 10.3390/ma10070831 Wei, 2019, 3D printing of silk fibroin-based hybrid scaffold treated with platelet rich plasma for bone tissue engineering, Bioact. Mater., 4, 256, 10.1016/j.bioactmat.2019.09.001 Rindone, 2019, Heparin-conjugated decellularized bone particles promote enhanced osteogenic signaling of PDGF-BB to adipose-derived stem cells in tissue engineered bone grafts, Adv. Healthc. Mater., 8 Bai, 2020, Enhanced osseointegration of three-dimensional supramolecular bioactive interface through osteoporotic microenvironment regulation, Theranostics, 10, 4779, 10.7150/thno.43736 McDermott, 2016, Influence of structural load-bearing scaffolds on mechanical load- and BMP-2-mediated bone regeneration, J. Mech. Behav. Biomed. Mater., 62, 169, 10.1016/j.jmbbm.2016.05.010 Herberg, 2019, Combinatorial morphogenetic and mechanical cues to mimic bone development for defect repair, Sci. Adv., 5, 10.1126/sciadv.aax2476 McDermott, 2019, Recapitulating bone development through engineered mesenchymal condensations and mechanical cues for tissue regeneration, Sci. Transl. Med., 11, 495, 10.1126/scitranslmed.aav7756 Sheehy, 2019, Biomaterial-based endochondral bone regeneration: a shift from traditional tissue engineering paradigms to developmentally inspired strategies, Mater. Today Bio, 3 Attalla, 2016, Fabrication and characterization of gels with integrated channels using 3D printing with microfluidic nozzle for tissue engineering applications, Biomed. Microdevices, 18, 17, 10.1007/s10544-016-0042-6 Bertlein, 2018, Development of endothelial cell networks in 3D tissues by combination of melt electrospinning writing with cell-accumulation technology, Small, 14 Holmes, 2016, A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair, Nanotechnology, 27, 10.1088/0957-4484/27/6/064001 Kang, 2016, A 3D bioprinting system to produce human-scale tissue constructs with structural integrity, Nat. Biotechnol., 34, 312, 10.1038/nbt.3413 Hinton, 2015, Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels, Sci. Adv., 1, 10.1126/sciadv.1500758 Cidonio, 2019, Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite–gelatin bioinks, Biofabrication, 11, 10.1088/1758-5090/ab19fd Rezaei Nejad, 2016, Laterally confined microfluidic patterning of cells for engineering spatially defined vascularization, Small, 12, 5132, 10.1002/smll.201601391 Grigoryan, 2019, Multivascular networks and functional intravascular topologies within biocompatible hydrogels, Science, 364, 458, 10.1126/science.aav9750 Zhu, 2017, Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture, Biomaterials, 124, 106, 10.1016/j.biomaterials.2017.01.042 Nulty, 2021, 3D bioprinting of prevascularised implants for the repair of critically-sized bone defects, Acta Biomater., 126, 154, 10.1016/j.actbio.2021.03.003 Daly, 2016, 3D bioprinting of developmentally inspired templates for whole bone organ engineering, Adv. Healthc. Mater., 5, 2353, 10.1002/adhm.201600182 Critchley, 2020, 3D printing of fibre-reinforced cartilaginous templates for the regeneration of osteochondral defects, Acta Biomater., 113, 130, 10.1016/j.actbio.2020.05.040 Morin, 2013, In vitro models of angiogenesis and vasculogenesis in fibrin gel, Exp. Cell Res., 319, 2409, 10.1016/j.yexcr.2013.06.006 Raghavan, 2010, Geometrically controlled endothelial tubulogenesis in micropatterned gels, Tissue Eng. A, 16, 2255, 10.1089/ten.tea.2009.0584 Utzinger, 2015, Large-scale time series microscopy of neovessel growth during angiogenesis, Angiogenesis, 18, 219, 10.1007/s10456-015-9461-x Freeman, 2015, Effects of in vitro endochondral priming and pre-vascularisation of human MSC cellular aggregates in vivo, Stem Cell Res Ther, 6, 218, 10.1186/s13287-015-0210-2 Freeman, 2020, A developmental engineering-based approach to bone repair: endochondral priming enhances vascularization and new bone formation in a critical size defect, Front. Bioeng. Biotechnol., 8, 230, 10.3389/fbioe.2020.00230 Ovsianikov, 2018, The synergy of scaffold-based and scaffold-free tissue engineering strategies, Trends Biotechnol., 36, 348, 10.1016/j.tibtech.2018.01.005 Burdis, 2021, Biofabrication and bioprinting using cellular aggregates, microtissues and organoids for the engineering of musculoskeletal tissues, Acta Biomater., 126, 1, 10.1016/j.actbio.2021.03.016 Yamasaki, 2019, Osteochondral regeneration using constructs of mesenchymal stem cells made by bio three-dimensional printing in mini-pigs, J. Orthop. Res., 37, 1398, 10.1002/jor.24206 Yu, 2016, Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink, Sci. Rep., 6, 28714, 10.1038/srep28714 Jeon, 2019, Individual cell-only bioink and photocurable supporting medium for 3D printing and generation of engineered tissues with complex geometries, Mater. Horiz., 6, 1625, 10.1039/C9MH00375D Foster, 2017, 3-Dimensional printing in medicine: hype, hope, and the challenge of personalized medicine, 211, 10.1007/978-3-319-45193-0_16 Brassard, 2021, Recapitulating macro-scale tissue self-organization through organoid bioprinting, Nat. Mater., 20, 22, 10.1038/s41563-020-00803-5 Nilsson Hall, 2020, Developmentally engineered callus organoid bioassemblies exhibit predictive in vivo long bone healing, Adv. Sci. (Weinh.), 7