Pressure performance improvement by dual-mode control in digital pump/motor
Tóm tắt
Due to the advantages of low cost, fast response and pollution resistance, digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields. However, digital hydraulic components produce large hydraulic impact at variable moments, which will shorten the service life of mechanical components. Through the simulation analysis of the variable process of digital pump/motor, it is found that the discontinuous flow caused by displacement step changes is the fundamental cause of hydraulic impact. The data analysis results of experimental tests are in good agreement with the simulation analysis results. In view of hydraulic secondary components, a variable control method based on dual-mode operating characteristics is proposed. The TOPSIS algorithm is used to give comprehensive evaluation of the displacement control results after this method. The results show that the control quality of digital pump/motor after adopting the control method has been effectively improved, with an average improvement of about 40%.
Tài liệu tham khảo
WANG Huan-kun, PAUL L. Modelling and energy efficiency analysis of a hybrid pump-controlled asymmetric (single-rod) cylinder drive system [J]. International Journal of Hydromechatronics, 2020, 3(1): 1–25. DOI: https://doi.org/10.1504/IJHM.2020.105501.
MATTI L. Digital fluid power—state of the art [C]// The 12th Scandinavian International Conference on Fluid Power. Tampere, Finland, 2011: 18–20. https://www.ixueshu.com/document/6ddee084ae0ffbf2318947a18e7f9386.html.
FLOR M, SCHELLER S, HEIDENFELDER R. Digital hydraulics at Bosch Rexroth—A trend evolves to real applications [C]// The 5th Workshop on Digital Fluid Power. Tampere, Finland, 2012: 5–14. https://trepo.tuni.fi/bitstream/handle/10024/116752/DFP12_proceedings.pdf?sequence=1&isAllowed=y#page=8.
AHSAN S, S MEHDI R, MOHAMMAD Z. Energy-efficient position control of an actuator in a digital hydraulic system using on/off valve [C]// 2016 4th International Conference on Robotics and Mechatronics (ICROM). Tehran, Iran, 2008: 34–45. DOI: https://doi.org/10.1109/ICRoM.2016.7886852.
GAN Zhen-yu, KATELYN F, R BRENT G. A novel variable transmission with digital hydraulics [C]// 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Hamburg, Germany, 2015: 5838–5843. DOI: https://doi.org/10.1109/IROS.2015.7354206.
SHEN Wei, MAI Yun-fei, SU Xiao-yu, ZHAO Jin-bao, JIANG Ji-hai. A new electric hydraulic actuator adopted the variable displacement pump [J]. Asian Journal of Control, 2016, 18(1): 178–191. DOI:https://doi.org/10.1002/asjc.1200.
EHSAN M, RAMPEN W H S, SALTER S H. Modelling of digital-displacement pump-motors and their application as hydraulic drives for nonuniform loads [J]. Journal of Dynamic Systems Measurement and Control, 2000, 122(1): 210–215. DOI: https://doi.org/10.1115/1.482444.
SONG Fei, LOU Jing-jun, PENG LI-kun. Energy-saving improvement and simulation study on digital hydraulic system [C]// 2015 International Conference on Advanced Mechatronic Systems (ICAMechS). Beijing, China: IEEE Conference Publications, 2015: 310–315. DOI: https://doi.org/10.1109/ICAMechS.2015.7287080.
LIU Cheng-qiang, LIU Yin-shui, LIU Jia-xin. Electro-hydraulic servo plate-Inclined plunger hydraulic transformer [J]. IEEE Access, 2016, 4: 8608–8616. DOI: https://doi.org/10.1109/ACCESS.2016.2628355.
WANG Li, LIU Xin-hui, WANG Xin, CHEN Jin-shi, LIANG Yi-jie. Strategy of digital hydraulic transmission system for loaders [J]. Journal of Jilin University (Engineering Science), 2017, 47(3): 819–826. DOI: https://doi.org/10.13229/j.cnki.jdxbgxb201703018. (in Chinese)
MIKKO H, MATTI L. Displacement control of a mobile crane using a digital hydraulic power management system [J]. Mechatronics, 2013, 23(4): 452–461. DOI: https://doi.org/10.1016/j.mechatronics.2013.03.009.
GONG Jun, ZHANG Da-qing, GUO Yong. Power control strategy and performance evaluation of a novel electro-hydraulic energy-saving system [J]. Applied Energy, 2019, 233–234: 724–734. DOI: https://doi.org/10.1016/j.apenergy.2018.10.066.
HELMUT K, RUDOLF S, MICHAEL E, EMANUELE G. A compact hydraulic switching converter for robotic applications [C]// Fluid Power and Motion Control (FPMC 2010). Bath, UK, 2010: 55–68. https://xueshu.baidu.com/usercenter/paper/show?paperid=718ed324b469c08ee21b190f842fc7bd&site=xueshu_se.
VICTOR J, WANG Peng-fei, ANDREW P, JOHNSTON D N. Behavioral prediction of hydraulic step-up switching converters [J]. International Journal of Fluid Power, 2014, 15(1): 1–9. DOI:https://doi.org/10.1080/14399776.2014.882057.
RAINER H, EVGENY L, RUDOLF S. An RC filter for hydraulic switching control with a transmission line between valves and actuator [J]. International Journal of Fluid Power, 2014, 15(3): 139–151. DOI: https://doi.org/10.1080/14399776.2014.970974.
MOORHEAD J R. Saving energy with ‘digital’ pump system [J]. Machine Design, 1984, 56(4): 40–44. https://www.researchgate.net/search.Search.html?type=researcher&query=.
ZHANG Li-ping, ZHOU Lan-wu, LIU Fen. Study on energy saving method of fixed displacement pump hydraulic system [J]. Chinese Mechanical Engineering, 2011, 12(1): 36–38. DOI: https://doi.org/10.3321/j.issn:1004-132X.2001.z1.014. (in Chinese)
LIU Xin-hui, WANG Tong-jian. Step variable system with multi gear pumps: China, 201110107578.3 [P]. 2011. (in Chinese)
ROEMER D, BECH M, JOHANSEN P, PEDERSEN H. Optimum design of a moving coil actuator for fast-switching valves in digital hydraulic pumps and motors [J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(6): 2761–2770. DOI: https://doi.org/10.1109/TMECH.2015.2410994.
HEITZIG S, THEISSEN H. Aspects of digital pumps in closed circuit [C]// The 4th Workshop on Digital Fluid Power. Linz, Austria, 2011. https://www.tandfonline.com/doi/abs/10.1080/14399776.2012.10781060.
HEITZIG S, SGRO S, THEISSEN H. Energy efficiency of hydraulic systems with shared digital pumps [J]. International Journal of Fluid Power, 2012, 13(3): 49–57.
MIIKKA K, MATTI L. Digital hydraulic IMV system in an excavator–first results [C]// The Sixteenth Scandinavian International Conference on Fluid Power. Tampere, Finland, 2019. https://www.researchgate.net/publication/336209686.
LAAMANEN A, LINJAMA M, VILENIUS M. On the pressure peak minimization in digital hydraulics [C]// The Tenth Scandinavian International Conference on Fluid Power. Tampere, Finland, 2007. http://URN.fi/URN:NBN:fi:tty-201403281139.
LAAMANEN A, ANTTONEN P, LINJAMA M. Digital low control unit for controlling amount of water used for binding dust [C]// The Third Workshop on Digital Fluid Power. Tampere, Finland, 2010. http://URN.fi/URN:NBN:fi:tty-201404081142.
HEIKKILÄ M, LINJAMA M. Improving damping characteristics of displacement controlled digital hydraulic system [C]// The Fifth Workshop on Digital Fluid Power, Tampere. Finland, 2012. https://trepo.tuni.fi/bitstream/handle/10024/116752/DFP12_proceedings.pdf?sequence=1#page=78.
WANG Jia-yi, LIU Xin-hui, WANG Xin, QI Hai-bo, SUN Xiao-yu, WANG Li. Mechanism and inhibition for displacement shifting impact on digital secondary component [J]. Journal of Jilin University (Engineering Science), 2017, 47(6): 1775–1781. DOI: https://doi.org/10.13229/j.cnki.jdxbgxb201706014. (in Chinese)
YAO Jing, ZHANG Yang, CHEN Hao, KONG Xiang-dong. Flow characteristics of (D+A) combination controlled multi-pump hydraulic system [J]. Chinese Hydraulics & Pneumatics, 2017(8): 79–83. DOI: https://doi.org/10.11832/j.issn.1000-4858.2017.08.014. (in Chinese)
ZHANG Yang. Control characteristics of D+A combined multi-pump controlled system [D]. Qinhuangdao: Yanshan University, College of Mechanical Engineering, 2017. https://xueshu.baidu.com/usercenter/paper/show?paperid=1s1k0pp0md3w0gv0e22b0j70m2114745&site=xueshu_se. (in Chinese)
LIU Tao, SUN Hui, JIANG Ji-hai. Investigation to simulation of control strategy of parallel hydraulic hybrid vehicles based on backward modeling [C]// 2009 International Conference on Mechatronics and Automation. Changchun, China: IEEE Conference Publications, 2009: 551–556. DOI: https://doi.org/10.1109/ICMA.2009.5246640.
LIU Xin-hui, WANG Wei, LIU Xiao-feng. Research for energy management mode of parallel hydraulic hybrid vehicle [C]// Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology. IEEE Conference Publications, 2011: 3824–3827. DOI. https://doi.org/10.1109/ICMA.2009.5246640.
LUMKES J H, FRONCZAK F J. Design simulation and validation of a bond graph model and controller to switch between pump and motor operation using four on/off valves with a hydraulic axial piston pump/motor [C]// Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334). IEEE Conference Publications, 2000: 3605–3609. DOI: https://doi.org/10.1109/ACC.2000.879242.
WANG Ji-sen, WANG Hai-tao, LI Shi-hui. The parameter analysis and simulation of accumulator in hydraulic test bench [J]. Machine Tools & Hydraulics, 2010, 38(15): 89–91. DOI: https://doi.org/10.3969/j.issn.1001-3881.2010.15.028. (in Chinese)
KHALKHALI A, SHOJAEEFARD M H, DAHMARDEH M, SOTOUDEH H. Optimal design and applicability of electric power steering system for automotive platform [J]. Journal of Central South University, 2019, 26(4): 839–851. DOI: https://doi.org/10.1007/s11771-019-4053-3.
LIU P. Multi–attribute decision–making method research based on interval vague set and TOPSIS method [J]. Ukio Technologinis Ir Ekonominis Vystymas, 2009, 15(3): 453–463. DOI: https://doi.org/10.3846/1392-8619.2009.15.453-463.
ASHRAF Q M, HABAEBI M H, ISLAM M R. TOPSIS-Based service arbitration for autonomic Internet of things [J]. IEEE Access, 2016, 4: 1313–1320. DOI: https://doi.org/10.1109/ACCESS.2016.2545741.
XIA Yi-min, LIN Lai-kuang, WU Dan, JIA Lian-hui, CHEN Zhuo, BIAN Zhang-kuo. Geological adaptability matching design of disc cutter using multicriteria decision making approaches [J]. Journal of Central South University, 2018, 25(4): 843–854. DOI: https://doi.org/10.1007/s11771-018-3788-6.