Preparation of supramolecular viscoelastic polymers with shear, temperature, and salt resistance/sensitivity by amphiphilic functional monomer modification

Wang, 2016, Photocatalysis: a novel approach to efficient demulsification, Catal. Commun., 75, 83, 10.1016/j.catcom.2015.12.008 Ma, 2021, Synthesis and properties of hydrophobically associating polymer fracturing fluid, Colloid. Surface., 626, 10.1016/j.colsurfa.2021.127013 Zhang, 2019, Experimental evaluation of a novel modification of anionic guar gum with maleic anhydride for fracturing fluid, Rheol. Acta, 58, 173, 10.1007/s00397-019-01131-5 Xu, 2021, Design of facile technology for the efficient removal of hydroxypropyl guar gum from fracturing fluid, PLoS One, 16, 10.1371/journal.pone.0247948 Fan, 2017, Understanding the temperature–resistance performance of a borate cross-linked hydroxypropyl guar gum fracturing fluid based on a facile evaluation method, RSC Adv., 7, 53290, 10.1039/C7RA11687J Cao, 2021, Comparative studies on hydraulic fracturing fluids for high-temperature and high-salt oil reservoirs: synthetic polymer versus guar gum, ACS Omega, 6, 25421, 10.1021/acsomega.1c03394 Tang, 2018, Experimental study of sulfonate gemini surfactants as thickeners for clean fracturing fluids, Energies, 11, 3182, 10.3390/en11113182 Yang, 2019, Reutilization of thickener from fracturing flowback fluid based on Gemini cationic surfactant, Fuel, 670, 10.1016/j.fuel.2018.08.059 Zhao, 2018, High performance clean fracturing fluid using a new tri-cationic surfactant, Polymers, 10, 535, 10.3390/polym10050535 Li, 2018, Reduced adsorption of polyacrylamide-based fracturing fluid on shale rock using urea, Energy Sci. Eng., 6, 749, 10.1002/ese3.249 Xiong, 2018, Chemical degradation of polyacrylamide during hydraulic fracturing, Environ. Sci. Technol., 52, 327, 10.1021/acs.est.7b00792 Almubarak, 2019, Dual-polymer hydraulic-fracturing fluids: a fynergy between polysaccharides and polyacrylamides, SPE J., 24, 2635, 10.2118/191580-PA Barbati, 2016, Complex fluids and hydraulic fracturing, Annu. Rev. Cell Biol., 7, 415 Qiao, 2021, Syntheses of a hyperbranched polymer and its performance on enhanced oil recovery, Front. Chem., 5 Zhou, 2021, The shear stability mechanism of cyclodextrin polymer and amphiphilic polymer inclusion gels, J. Mol. Liq., 328, 10.1016/j.molliq.2021.115399 Du, 2021, Effect of salt-resistant monomers on viscosity of modified polymers based on the hydrolyzed poly-acrylamide (HPAM): a molecular dynamics study, J. Mol. Liq., 325, 10.1016/j.molliq.2020.115161 Wang, 2020, A Comprehensive method to evaluate the viscous slickwater as fracturing fluids for hydraulic fracturing applications, J. Petrol. Sci. Eng., 193, 10.1016/j.petrol.2020.107359 Afolabi, 2015, Effect of surfactant and hydrophobe content on the rheology of poly (acrylamide-co-N-dodecylacrylamide) for potential enhanced oil recovery application, Am. J. Polym. Sci., 5, 41 Kamal, 2015, Review on polymer flooding: rheology, adsorption, stability, and field applications of various polymer systems, Polym. Rev., 55, 491, 10.1080/15583724.2014.982821 Du, 2021, Effect of salt-resistant monomers on viscosity of modifified polymers based on the hydrolyzed poly-acrylamide (HPAM): a molecular dynamics study, J. Mol. Liq., 325, 10.1016/j.molliq.2020.115161 Brun, 2016, On the drag reduction effect and shear stability of improved acrylamide copolymers for enhanced hydraulic fracturing, Chem. Eng. Sci., 146, 135, 10.1016/j.ces.2016.02.009 Kang, 2019, Study on rheological behavior and salt-thickening mechanism of a synthesized twin-tailed hydrophobically modified polyacrylamide, J. Mol. Liq., 294 Du, 2021, A novel hydrophobically associating polymer based on Twin-tailed amphiphilic Monomer: experimental study and molecular dynamics simulation, J. Mol. Liq., 341, 10.1016/j.molliq.2021.117293 Meli, 2002, Self-assembled masks for the transfer of nanometerscale patterns into surfaces: characterization by AFM and LFM, Nano Lett., 2, 131, 10.1021/nl015639v Băran, 2022, The effect of C12E6 nonionic surfactant on the solubilization of eosin y in unmodified- and Hydrophobically modified poly(Acrylic acid) solutions, J. Mol. Liq., 345 Wang, 2000, Syntheses of amphiphilic diblock copolymers containing a conjugated block and their self-assembling properties, J. Am. Chem. Soc., 122, 6855, 10.1021/ja0010812 1999 Ensing, 2019, On the origin of the extremely different solubilities of polyethers in water, Nat. Commun., 10, 2893, 10.1038/s41467-019-10783-z Li, 2011, Study of emulsion polymerization stabilized by amphiphilic polymer nanoparticles, Colloid Polym. Sci., 289, 1543, 10.1007/s00396-011-2477-x Wang, 2012, Study on preparation and solution properties of hydrophobically associating polyacrylamide by emulsifier-free ultrasonic assisted radical polymerization, J. Polym. Res., 19, 9933, 10.1007/s10965-012-9933-2 Yang, 2015, Self-assembly properties of hydrophobically associating perfluorinated polyacrylamide in dilute and semi-dilute solutions, J. Polym. Res., 22, 103, 10.1007/s10965-015-0750-2 Wang, 2021, Tough, transparent, 3D-printable, and self-healing poly (ethylene glycol)-gel (PEG gel), Adv. Mater., 34, 10.1002/adma.202107791 Wu, 2022, Salt endurable and shear resistant polymer systems based on dynamically reversible acyl hydrazone bond, J. Mol. Liq., 346 Ye, 2016, Synthesis and characterizations of hydrophobically associating water-soluble polymer with nonionic surfmer, J. Appl. Polym. Sci., 133, 10.1002/app.43195 Gao, 2016 Xie, 2021, Enhanced hydrophobically modified polyacrylamide gel for lost circulation treatment in high temperature drilling, J. Mol. Liq., 325, 10.1016/j.molliq.2020.115155 Zhou, 2017, Synthesis and properties evaluation of sulfobetaine surfactant with double hydroxyl, J. Mol. Struct., 1144, 199, 10.1016/j.molstruc.2017.05.023 Zhang, 2019, Preparation of a hydrophobic-associating polymer with ultra-high salt resistance using synergistic effect polymers, Polymers, 11, 626, 10.3390/polym11040626 Mao, 2022, Development of a hydrophobically associating polymer with ultrahigh shear recovery performance based on the characteristics of stronger association and lower molecular weight, Energy Fuel., 36, 5240, 10.1021/acs.energyfuels.1c04071 Zhang, 2018, Preparation of a novel ultra-high temperature low-damage fracturing fluid system using dynamic crosslinking Strategy, J. Eng. Chem., 354, 913, 10.1016/j.cej.2018.08.021 Pu, 2018, Preparation and evaluation of supramolecular fracturing fluid of hydrophobically associative polymer and viscoelastic surfactant, J. Petrol. Sci. Eng., 167, 568, 10.1016/j.petrol.2018.04.032 Choi, 2014, Temperature-dependent viscosity model of HPAM polymer through high-temperature reservoirs, Polym. Degrad. Stabil., 110, 225, 10.1016/j.polymdegradstab.2014.09.006 Yang, 2019, Improving the thermal stability of hydrophobic associative polymer aqueous solution using a “triple-protection” strategy polymers, Polymers, 11, 949, 10.3390/polym11060949 Dali, 2018, Synthesis and performance of modified polymer fracturing fluid, Chin. J. Appl. Chem., 35, 1295 Mao, 2018, Novel hydrophobic associating polymer with good salt tolerance, Polymers, 10, 849, 10.3390/polym10080849 Härtel, 2014, Fundamental measure theory for the electric double layer: implications for blue-energy harvesting and water desalination, J. Phys. Condens. Matter, 27, 10.1088/0953-8984/27/19/194129 Pu, 2016, Synthesis of a novel comb micro-block hydrophobically associating copolymer for Ca2+/Mg2+ resistance, RSC Adv., 6, 43634, 10.1039/C6RA07110D Pu, 2017, Influences of structure and multi-intermolecular forces on rheological and oil displacement properties of polymer solutions in the presence of Ca2+/Mg2+, RSC Adv., 7, 4430, 10.1039/C6RA25132C