Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant

Ferguson, 2001, 134

Choi, 2009, Tribological behavior of copper nanoparticles as additives in oil, Current Applied Physics, 9, 124, 10.1016/j.cap.2008.12.050

Lee, 2009, A study on the tribological characteristics of graphite nano lubricants, International Journal of Precision Engineering and Manufacturing, 10, 85, 10.1007/s12541-009-0013-4

Vakili-Nezhaad, 2009, Investigation of the effect of multiwalled carbon nanotubes on the viscosity index of lube oil cuts, Chemical Engineering Communications, 196, 997, 10.1080/00986440902797865

Wu, 2007, Experimental analysis of tribological properties of lubricating oils with nanoparticle additives, Wear, 262, 819, 10.1016/j.wear.2006.08.021

Liu, 2011, Lubrication Effect of the Paraffin Oil Filled with Functionalized Multiwalled Carbon Nanotubes for Bismaleimide Resin, Tribology Letters, 42, 59, 10.1007/s11249-011-9749-y

Peng, 2007, Tribological behaviors of surfactant-functionalized carbon nanotubes as lubricant additive in water, Tribology Letters, 25, 247, 10.1007/s11249-006-9176-7

Mingwu, 2001, Nano-tribological properties and mechanisms of the liquid crystal as an additive, Chinese Science Bulletin, 46, 1227, 10.1007/BF02900609

Ji, 2011, Tribological properties of CaCO3 nanoparticles as an additive in lithium grease, Tribology Letters, 41, 113, 10.1007/s11249-010-9688-z

Hwang, 2011, Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discs, Journal of Mechanical Science and Technology, 25, 2853, 10.1007/s12206-011-0724-1

Ma, 2010, Anti-wear and friction performance of ZrO2 nanoparticles as lubricant additive, Particuology, 8, 468, 10.1016/j.partic.2009.06.007

Hwang, 2006, Investigation on characteristics of thermal conductivity enhancement of nanofluids, Current Applied Physics, 6, 1068, 10.1016/j.cap.2005.07.021

Kim, 2009, Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions, Current Applied Physics, 9, 119, 10.1016/j.cap.2008.12.047

Choi, 2008, Preparation and heat transfer properties of nanoparticle-in-transformer oil dispersions as advanced energy-efficient coolants, Current Applied Physics, 8, 710, 10.1016/j.cap.2007.04.060

Hwang, 2006, Thermal conductivity and lubrication characteristics of nanofluids, Current Applied Physics, 6S1, 67, 10.1016/j.cap.2006.01.014

Saeedinia, 2012, Thermal and rheological characteristics of CuO–base oil nanofluid flow inside an circular tube, International Communications in Heat and Mass Transfer, 39, 152, 10.1016/j.icheatmasstransfer.2011.08.001

Ruan, 2012, Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions, Nanoscale Research Letters, 7

Chen, 2011, Rheological behaviors of nanofluids containing multi-walled carbon nanotube, Journal of Dispersion Science and Technology, 32, 550, 10.1080/01932691003757223

Vasheghani, 2011, Effect of Al2O3 phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil, Heat and Mass Transfer, 47, 1401, 10.1007/s00231-011-0806-8

Harish, 2012, Enhanced thermal conductivity of ethylene glycol with single-walled carbon nanotube inclusions, International Journal of Heat and Mass Transfer, 55, 3885, 10.1016/j.ijheatmasstransfer.2012.03.001

Rashidi, 2007, Single-wall carbon nanotubes synthesized using organic additives to Co–Mo catalysts supported on nanoporous MgO, Nanotechnology, 18, 315, 10.1088/0957-4484/18/31/315605

Hwang, 2007, Stability and thermal conductivity characteristics of nanofluids, Thermochimica Acta, 455, 70, 10.1016/j.tca.2006.11.036

Thottackkad, 2012, Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nanoparticles, International Journal of Precision Engineering and Manufacturing, 13, 111, 10.1007/s12541-012-0015-5

Ramanthan, 2005, Amino-functionalized carbon nanotubes for binding to polymers and biological systems, Chemistry of Materials, 17, 1290, 10.1021/cm048357f

Shen, 2007, Study on amino-functionalized multiwalled carbon nanotubes, Materials Science and Engineering A, 464, 151, 10.1016/j.msea.2007.02.091

Gabrial, 2006, Preparation and characterization of single-walled carbon nanotubes functionalized with amines, Carbon, 44, 1891, 10.1016/j.carbon.2006.02.010

Hemraj-Benny, 2008, Effect of ozonolysis on the pore structure, surface chemistry, and bundling of single-walled carbon nanotubes, Journal of Colloid and Interface Science, 317, 375, 10.1016/j.jcis.2007.09.064

Wang, 2005, Microwave-induced rapid chemical functionalization of single-walled carbon nanotubes, Carbon, 43, 1015, 10.1016/j.carbon.2004.11.036

Chen, 2008, Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes, Materials Science and Engineering A, 492, 236, 10.1016/j.msea.2008.04.044

Tao, 2008, Functionalized multiwall carbon nanotubes combined with bis(2,2′-bipyridine)-5-amino-1,10-phenanthroline ruthenium(II) as an electrochemiluminescence sensor, Sensors & Actuators B: Chemical, 129, 758, 10.1016/j.snb.2007.09.047

Xu, 2007, Covalent functionalization of multi-walled carbon nanotubes surfaces by conjugated polyfluorenes, Polymer, 48, 7510, 10.1016/j.polymer.2007.11.012

Ku, 2010, Tribological effects of fullerene (C60) nanoparticles added in mineral lubricants according to its viscosity, International Journal of Precision Engineering and Manufacturing, 11, 607, 10.1007/s12541-010-0070-8