Preparation and properties of poly (vinylidene fluoride) membranes via the low temperature thermally induced phase separation method

Rajabzadeh S, Liang C, Ohmukai Y, Maruyama T, Matsuyama H (2012) Effect of additives on the morphology and properties of poly (vinylidene fluoride) blend hollow fiber membrane prepared by the thermally induced phase separation method. J Membr Sci 423:189–194

Pezeshk N, Narbaitz RM (2012) More fouling resistant modified PVDF ultrafiltration membranes for water treatment. Desalination 287:247–254

Yuliwati E, Ismail AF (2011) Effect of additives concentration on the surface properties and performance of PVDF ultrafiltration membranes for refinery produced wastewater treatment. Desalination 273:226–234

Ahmad A, Ideris N, Ooi B, Low S, Ismail A (2011) Morphology and polymorph study of a polyvinylidene fluoride (PVDF) membrane for protein binding: Effect of the dissolving temperature. Desalination 278:318–324

Grelot A, Grelier P, Vincelet C, Brüss U, Grasmick A (2010) Fouling characterisation of a PVDF membrane. Desalination 250:707–711

Hong J, He Y (2012) Effects of nano sized zinc oxide on the performance of PVDF microfiltration membranes. Desalination 302:71–79

Li N, Xiao C, An S, Hu X (2010) Preparation and properties of PVDF/PVA hollow fiber membranes. Desalination 250:530–537

Wang Q, Wang Z, Wu Z (2012) Effects of solvent compositions on physicochemical properties and anti-fouling ability of PVDF microfiltration membranes for wastewater treatment. Desalination 297:79–86

Liu F, Hashim NA, Liu Y, Abed MRM, Li K (2011) Progress in the production and modification of PVDF membranes. J Membr Sci 375:1–27

Wang Z, Yu H, Xia J, Zhang F, Li F, Xia Y, Li Y (2012) Novel GO-blended PVDF ultrafiltration membranes. Desalination 299:50–54

Tang Y, Li N, Liu A, Ding S, Yi C, Liu H (2012) Effect of spinning conditions on the structure and performance of hydrophobic PVDF hollow fiber membranes for membrane distillation. Desalination 287:326–339

Ghasem N, Al-Marzouqi M, Duidar A (2012) Effect of PVDF concentration on the morphology and performance of hollow fiber membrane employed as gas–liquid membrane contactor for CO2 absorption. Sep Purif Technol 98:174–185

Benz M, Euler WB (2003) Determination of the crystalline phases of poly (vinylidene fluoride) under different preparation conditions using differential scanning calorimetry and infrared spectroscopy. J Appl Polym Sci 89:1093–1100

Gregorio R Jr (2006) Determination of the α, β, and γ crystalline phases of poly (vinylidene fluoride) films prepared at different conditions. J Appl Polym Sci 100:3272–3279

El Mohajir BE, Heymans N (2001) Changes in structural and mechanical behaviour of PVDF with processing and thermomechanical treatments. 1. Change in structure. Polymer 42:5661–5667

El Mohajir BE, Heymans N (2001) Changes in structural and mechanical behaviour of PVDF with processing or thermal treatment.: 2. Evolution of mechanical behaviour. Polymer 42:7017–7023

Vijayakumar RP, Khakhar DV, Misra A (2010) Studies on α to β phase transformations in mechanically deformed PVDF films. J Appl Polym Sci 117:3491–3497

Teyssedre G, Bernes A, Lacabanne C (1993) Influence of the crystalline phase on the molecular mobility of PVDF. J Polym Sci B Polym Phys 31:2027–2034

Buonomenna M, Macchi P, Davoli M, Drioli E (2007) Poly (vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties. Eur Polym J 43:1557–1572

Cui ZY, Du CH, Xu YY, Ji GL, Zhu BK (2008) Preparation of porous PVdF membrane via thermally induced phase separation using sulfolane. J Appl Polym Sci 108:272–280

Lloyd DR, Kinzer KE, Tseng H (1990) Microporous membrane formation via thermally induced phase separation. I. Solid–liquid phase separation. J Membr Sci 52:239–261

Lloyd DR, Kim SS, Kinzer KE (1991) Microporous membrane formation via thermally-induced phase separation. II. Liquid-liquid phase separation. J Membr Sci 64:1–11

Rajabzadeh S, Maruyama T, Sotani T, Matsuyama H (2008) Preparation of PVDF hollow fiber membrane from a ternary polymer/solvent/nonsolvent system via thermally induced phase separation (TIPS) method. Sep Purif Technol 63:415–423

Ji GL, Du CH, Zhu BK, Xu YY (2007) Preparation of porous PVDF membrane via thermally induced phase separation with diluent mixture of DBP and DEHP. J Appl Polym Sci 105:1496–1502

Lin YK, Tang YH, Ma HY, Yang J, Tian Y, Ma WZ, Wang XL (2009) Formation of a bicontinuous structure membrane of polyvinylidene fluoride in diphenyl carbonate diluent via thermally induced phase separation. J Appl Polym Sci 114:1523–1528

Rajabzadeh S, Maruyama T, Ohmukai Y, Sotani T, Matsuyama H (2009) Preparation of PVDF/PMMA blend hollow fiber membrane via thermally induced phase separation (TIPS) method. Sep Purif Technol 66:76–83

Gregorio R Jr, Borges DS (2008) Effect of crystallization rate on the formation of the polymorphs of solution cast poly (vinylidene fluoride). Polymer 49:4009–4016

Brandrup J, Immergut EH, Grulke EA, Abe A, Bloch DR (1999) Polymer handbook. Wiley, New York

Liu M, Wei YM, Xu ZL, Guo RQ, Zhao LB (2013) Preparation and characterization of polyethersulfone microporous membrane via thermally induced phase separation with low critical solution temperature system. J Membr Sci 437:169–178

Li XF, Wang YG, Lu XL, Xiao CF (2008) Morphology changes of polyvinylidene fluoride membrane under different phase separation mechanisms. J Membr Sci 320:477–482

Abed MRM, Kumbharkar SC, Groth AM, Li K (2012) Ultrafiltration PVDF hollow fibre membranes with interconnected bicontinuous structures produced via a single-step phase inversion technique. J Membr Sci 407–408:145–154

Tao MM, Liu F, Ma BR, Xue LX (2013) Effect of solvent power on PVDF membrane polymorphism during phase inversion. Desalination 316:137–145

Li Q, Xu ZL, Yu LY (2010) Effects of mixed solvents and PVDF types on performances of PVDF microporous membranes. J Appl Polym Sci 115:2277–2287

Mohammadi B, Yousefi AA, Bellah SM (2007) Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin films. Polym Test 26:42–50

Ma WZ, Zhang J, Wang XL, Wang SM (2007) Effect of PMMA on crystallization behavior and hydrophilicity of poly (vinylidene fluoride)/poly (methyl methacrylate) blend prepared in semi-dilute solutions. Appl Surf Sci 253:8377–8388

Liu J, Lu XL, Wu CR (2013) Effect of annealing conditions on crystallization behavior and mechanical properties of NIPS poly (vinylidene fluoride) hollow fiber membranes. J Appl Polym Sci 129:1417–1425

Iwata H, Saito K, Furusaki S, Sugo T, Okamoto J (1991) Adsorption characteristics of an immobilized metal affinity membrane. Biotechnol Prog 7:412–418

Cui ZL, Hassankiadeh NT, Lee SY, Lee JM, Woo KT, Sanguineti A, Arcella V, Lee YM, Drioli E (2013) Poly (vinylidene fluoride) membrane preparation with an environmental diluent via thermally induced phase separation. J Membr Sci 444:223–236

Bottino A, Camera-Roda G, Capannelli G, Munari S (1991) The formation of microporous polyvinylidene difluoride membranes by phase separation. J Membr Sci 57:1–20

Song ZY, Xing MH, Zhang J, Li BA, Wang SC (2012) Determination of phase diagram of a ternary PVDF/γ-BL/DOP system in TIPS process and its application in preparing hollow fiber membranes for membrane distillation. Sep Purif Technol 90:221–230

Peng N, Chung TS, Wang KY (2008) Macrovoid evolution and critical factors to form macrovoid-free hollow fiber membranes. J Membr Sci 318:363–372

Zhang M, Zhang AQ, Zhu BK, Du CH, Xu YY (2008) Polymorphism in porous poly (vinylidene fluoride) membranes formed via immersion precipitation process. J Membr Sci 319:169–175

Van de Witte P, Dijkstra P, Van den Berg J, Feijen J (1996) Phase separation processes in polymer solutions in relation to membrane formation. J Membr Sci 117:1–31

Kundu PP, Biswas J, Kim H, Choe S (2003) Influence of film preparation procedures on the crystallinity, morphology and mechanical properties of LLDPE films. Eur Polym J 39:1585–1593

Müller CM, Laurindo JB, Yamashita F (2009) Effect of cellulose fibers on the crystallinity and mechanical properties of starch-based films at different relative humidity values. Carbohydr Polym 77:293–299

Wright D, Dunk R, Bouvart D, Autran M (1988) The effect of crystallinity on the properties of injection moulded polypropylene and polyacetal. Polymer 29:793–796

Ahmed M, Ghanbari H, Cousins BG, Hamilton G, Seifalian AM (2011) Small calibre polyhedral oligomeric silsesquioxane nanocomposite cardiovascular grafts: influence of porosity on the structure, haemocompatibility and mechanical properties. Acta Biomater 7:3857–3867

Jousseaume V, Rolland G, Babonneau D, Simon J (2009) Influence of polymer porogens on the porosity and mechanical properties of spin coated Ultra Low k dielectrics. Thin Solid Films 517:4413–4418

Yen C, He H, Lee LJ, Ho W (2009) Synthesis and characterization of nanoporous polycaprolactone membranes via thermally-and nonsolvent-induced phase separations for biomedical device application. J Membr Sci 343:180–188

Gu M, Zhang J, Wang X, Tao H, Ge L (2006) Formation of poly (vinylidene fluoride) (PVDF) membranes via thermally induced phase separation. Desalination 192:160–167

Ji GL, Zhu LP, Zhu BK, Zhang CF, Xu YY (2008) Structure formation and characterization of PVDF hollow fiber membrane prepared via TIPS with diluent mixture. J Membr Sci 319:264–270

Ghasem N, Al-Marzouqi M, Duaidar A (2011) Effect of quenching temperature on the performance of poly (vinylidene fluoride) microporous hollow fiber membranes fabricated via thermally induced phase separation technique on the removal of CO2 from CO2-gas mixture. International Journal of Greenhouse Gas Control 5:1550–1558