Preparation and properties of KH550-Al2O3/PI–EP nanocomposite material

Huang W, Yan DY, Lu QH (2003) Synthesis and properties of polyimides from 1,3-bis(4-piperidino-l, S-naphthalic anhydride)propane. Polym Bull 49:417–423

Cho YH, Park JM, Park YH (2004) Preparation and properties of polyimides having highly flexible linkages and their nanocomposites with organoclays. Macromol Res 12:38–45

Sen’ko SF, Snitovskii YP (2006) Adhesion of polyimide films to microelectronic article components. Russ J Appl Chem 79:1681–1685

Kiatkamjornwong S, Yusabai W (2004) Effect of epoxy resin-silane on physical properties of coated films on steel surfaces. Surf Coat Int Part B: Coat Transact 87:149–234

Bogomolov VN, Parfen’eva LS, Sorokin LM, Smirnov IA, Misiorek H, Jezowski A, Hutchison J (2002) Structural and thermal properties of the opal–epoxy resin nanocomposite. Phys Solid State 44:1061–1066

Hoontrakul P, Pearson RA (2006) Surface reactivity of polyimide and its effect on adhesion to epoxy. J Adhes Sci Technol 20:1905–1928

Samyn P, Baets PD, Schoukens G (2009) Influence of internal lubricants (PTFE and silicon oil) in short carbon fibre-reinforced polyimide composites on performance properties. Tribol Lett 36:135–146

Zou LJ, Roddecha S, Anthamatten M (2009) Morphology, hydration, and proton transport in novel sulfonated polyimide–silica nanocomposites. Polymer 50:3136–3144

Babanzadeh S, Mehdipour-Ataei S, Mahjoub AR (2012) Preparation and characterization of novel polyimide/SiO2 nano-hybrid films by in situ polymerization. J Inorg Organomet Polym Mater 22:1404–1412

Kim HJ, Yoon YJ, Kim JH, Nam SM (2009) Application of Al2O3-based polyimide composite thick films to integrated substrates using aerosol deposition method. Mater Sci Eng, B 161:104–108

Lal R, Rathore BS, Gaur MS (2012) Structural and polarization properties of polyimide/TiO2 nanocomposites. Ionics 18:565–572

Popova EN, Didenko AL, Svetlichnyi VM, Yudin VE, Kaidash EA, Vasil’eva ES, Tolochko OV, Li DW, Kim D (2006) Synthesis and properties of films of a polyimide filled with ferromagnetic nanoparticles. Russ J Appl Chem 79:1321–1324

Bakar M, Okulska-Bożek M, Zygmunt M (2011) Effect of poly(amic acid) and polyimide on the adhesive strength and fracture toughness of epoxy resin. Mater Sci 47:355–362

Hung H, Chiou BS (2002) Curing of polyimide and the effect of the TEOS SiO2 barrier layer on the electromigration of sputtered Cu with polyimide passivation. J Electron Mater 31:82–87

Zhai Y, Yang Q, Zhu RQ, Gu Y (2008) The study on imidization degree of polyamic acid in solution and ordering degree of its polyimide film. J Mater Sci 43:338–344

Low BT, Xiao YC, Chung TS (2009) Amplifying the molecular sieving capability of polyimide membranes via coupling of diamine networking and molecular architecture. Polymer 50:3250–3258

Anbazhagan S, Alagar M, Gnanasundaram P (2011) Synthesis and characterization of organic-inorganic hybrid clay filled and bismaleimide–siloxane modified epoxy nanocomposites. Int J Plast Technol 15:30–45

Xie W, Pan WP, Chuang KC (2001) Thermal degradation study of polymerization of monomeric reactants (PMR) polyimides. J Thermal Anal Calorim 64:477–485

Chang JH, Park KM, Lee IC (2000) Thermal cyclodehydration of aromatic precursor polymers to polybenzoxazole and polyimide; their thermal and mechanical properties. Polym Bull 44:63–69

Song YJ, Meng SH, Wang FD, Sun CX, Tan ZC (2002) A study on the thermodynamic properties of polyimide BTDA–ODA by adiabatic calorimetry and thermal analysis. J Thermal Anal Calorim 69:617–625

Seyedjamali H, Pirisedigh A (2011) Synthesis and morphology of new functional polyimide/titania nano hybrid materials. J Mater Sci 46:6744–6750

Seyedjamali H, Pirisedigh A (2012) Synthesis of well-dispersed polyimide/TiO2 nanohybrid films using a pyridine-containing aromatic diamine. Polym Bull 68:299–308

Zhang J, Zhu BK, Xu YY (2005) Characterization and dielectric property of polyimide-silica composite films prepared via sol–gel and thermal imidization process. J Mater Sci 40:2623–2625

Kurmvanshi SK, Patel PR, Patel AK, Bajpai R, Keller JM (2012) Polyimide/tetraethoxysilane-based hybrid polyfilms for microelectronics application. Microsyst Technol 18:603–611

Ali AAM, Ahmad Z (2007) The effect of curing conditions and ageing on the thermo-mechanical properties of polyimide and polyimide–silica hybrids. J Mater Sci 42:8363–8369

Huang JC, Zhu ZK, Ma XD, Qian XF, Yin J (2001) Preparation and properties of montmorillonite/organo-soluble polyimide hybrid materials prepared by a one-step approach. J Mater Sci 36:871–877