Preparation and photoaging resistance of single-walled carbon nanotubes transparent conductive thin films for electrostatic dust removal of photovoltaic panels

Liu, 2022, Progress in thermoplasmonics for solar energy applications, Phys. Rep., 981, 1, 10.1016/j.physrep.2022.07.002 Verduci, 2022, Solar energy in space applications: review and technology perspectives, Adv. Energy Mater., 12, 2200125, 10.1002/aenm.202200125 Kumar, 2023, Solar energy: a promising renewable source for meeting energy demand in Indian agriculture applications, Sustain. Energy Technol. Assess, 55 Abou Jieb, 2022 Marques Lameirinhas, 2022, A photovoltaic technology review: history, fundamentals and applications, Energies, 15, 1823, 10.3390/en15051823 Alnasser, 2020, Impact of dust ingredient on photovoltaic performance: an experimental study, Sol. Energy, 195, 651, 10.1016/j.solener.2019.12.008 Kazem, 2020, A review of dust accumulation and cleaning methods for solar photovoltaic systems, J. Clean. Prod., 276, 10.1016/j.jclepro.2020.123187 Fan, 2021, A novel method for analyzing the effect of dust accumulation on energy efficiency loss in photovoltaic (PV) system, Energy, 234, 10.1016/j.energy.2021.121112 Dida, 2020, Output power loss of crystalline silicon photovoltaic modules due to dust accumulation in Saharan environment, Renew. Sustain. Energy Rev., 124, 10.1016/j.rser.2020.109787 Chen, 2020, Study on impacts of dust accumulation and rainfall on PV power reduction in East China, Energy, 194, 10.1016/j.energy.2020.116915 Sulaiman, 2011, Effects of dust on the performance of PV panels, world academy of science, Eng. Technol., 58, 588 Fan, 2022, A novel water-free cleaning robot for dust removal from distributed photovoltaic (PV) in water-scarce areas, Sol. Energy, 241, 553, 10.1016/j.solener.2022.06.024 Kawamoto, 2020, Improved detachable electrodynamic cleaning system for dust removal from soiled photovoltaic panels, J. Electro, 107, 10.1016/j.elstat.2020.103481 Kawamoto, 2019, Electrostatic cleaning equipment for dust removal from soiled solar panels, J. Electro, 98, 11, 10.1016/j.elstat.2019.02.002 Zhang, 2018, Criteria for particles to be levitated and to move continuously on traveling-wave electric curtain for dust mitigation on solar panels, Renew. Energy, 119, 410, 10.1016/j.renene.2017.12.009 Qian, 2012, Control analysis for solar panel dust mitigation using an electric curtain, Renew. Energy, 41, 134, 10.1016/j.renene.2011.10.014 Panat, 2022, Electrostatic dust removal using adsorbed moisture–assisted charge induction for sustainable operation of solar panels, Sci. Adv., 8, 10.1126/sciadv.abm0078 Zhang, 2019, Recent developments in single-walled carbon nanotube thin films fabricated by dry floating catalyst chemical vapor deposition, Single-Walled carbon nanotubes: preparation, Prop. Appl., 99 Zhang, 2022, Dry-transferred single-walled carbon nanotube thin films for flexible and transparent heaters, Surf. Interfaces, 31 Geng, 2008, Ect of carbon nanotube types in fabricating flexible transparent conducting films, J. Korean Phys. Soc., 53, 979, 10.3938/jkps.53.979 Jiang, 2019, High-performance single-wall carbon nanotube transparent conductive films, J. Mater. Sci. Technol., 35, 2447, 10.1016/j.jmst.2019.07.011 Pei, 2009, The fabrication of a carbon nanotube transparent conductive film by electrophoretic deposition and hot-pressing transfer, Nanotechnology, 20, 10.1088/0957-4484/20/23/235707 Jiang, 2018, Ultrahigh-performance transparent conductive films of carbon-welded isolated single-wall carbon nanotubes, Sci. Adv., 4, eaap9264, 10.1126/sciadv.aap9264 Smolyanitsky, 2011, Simulation of lattice strain due to a CNT–metal interface, Nanotechnology, 22, 10.1088/0957-4484/22/8/085703 Rossouw, 2013, Structural and electronic distortions in individual carbon nanotubes under laser irradiation in the electron microscope, Phys. Rev. B, 87, 10.1103/PhysRevB.87.125403 Xie, 2014, Effects of hydroxylated carbon nanotubes on the aggregation of Aβ16–22 peptides: a combined simulation and experimental study, Biophys. J., 107, 1930, 10.1016/j.bpj.2014.08.034 Zhang, 2021, Hydroxylated single-walled carbon nanotube inhibits β2m21–31 fibrillization and disrupts pre-formed proto-fibrils, Int. J. Biol. Macromol., 193, 1, 10.1016/j.ijbiomac.2021.10.103 Zhang, 2014, Anti-yellowing property of polyurethane improved by the use of surface-modified nanocrystalline cellulose, BioResources, 9, 673 Yanzhi, 2016, Influence of environment on ageing behaviour of the polyurethane film, Mater. Sci., 22, 290 Ren, 2021, Improvement for yellowing resistance of aromatic PU film by fluoro alcohol termination and branching modification, Prog. Org. Coat., 155 Ishida, 2016, Synthesis of block copolymer with photo-decomposable polyurethane and its photo-initiated domino decomposition, React. Funct. Polym., 107, 20, 10.1016/j.reactfunctpolym.2016.08.004 Haacke, 1976, New figure of merit for transparent conductors, J. Appl. Phys., 47, 4086, 10.1063/1.323240 Costa, 2015, Effect of butadiene/styrene ratio, block structure and carbon nanotube content on the mechanical and electrical properties of thermoplastic elastomers after UV ageing, Polym. Test., 42, 225, 10.1016/j.polymertesting.2015.02.002 Li, 2021, Hydroxyl‐terminated polybutadiene based waterborne polyurethane acrylate emulsions: synthesis, characterization, and damping property, J. Appl. Polym. Sci., 138, 50300, 10.1002/app.50300 Wang, 2015, A novel carbon nanotubes reinforced superhydrophobic and superoleophilic polyurethane sponge for selective oil–water separation through a chemical fabrication, J. Mater. Chem. A, 3, 266, 10.1039/C4TA03945A Wu, 2019, Superhydrophobic polyurethane foam coated with polysiloxane-modified clay nanotubes for efficient and recyclable oil absorption, ACS Appl. Mater. Interfaces, 11, 25445, 10.1021/acsami.9b08023