Preparation and characterization of poly (vinyl chloride) (PVC) based membrane for wastewater treatment

Alzahrani, 2014, Challenges and trends in membrane technology implementation for produced water treatment: a review, J. Water Process Eng., 4, 107, 10.1016/j.jwpe.2014.09.007 Vankelecom, 2006, Membrane processes, 251 Rabiee, 2014, Improvement in CO2/H2 separation by fabrication of poly(ether-b-amide6)/glycerol triacetate gel membranes, J. Membr. Sci., 469, 43, 10.1016/j.memsci.2014.06.026 Freeman Benny, 2004, Gas and liquid separations using membranes: an overview, in: advanced materials for membrane separations, Am. Chem. Soc., 1 Križan Milić, 2013, Recent developments in membrane treatment of spent cutting-oils: a review, Ind. Eng. Chem. Res., 52, 7603, 10.1021/ie4003552 Noble, 2005, Separations research needs for the 21st century, Ind. Eng. Chem. Res., 44, 2887, 10.1021/ie0501475 Salcedo-Diaz, 2014, Optimal design of a hybrid membrane system combining reverse and forward osmosis for seawater desalination, 1399, 10.1016/B978-0-444-63455-9.50068-4 Soltanieh, 1981, Review of reverse osmosis membranes and transport models, Chem. Eng. Commun., 12, 279, 10.1080/00986448108910843 Lutchmiah, 2014, Forward osmosis for application in wastewater treatment: a review, Water Res., 58, 179, 10.1016/j.watres.2014.03.045 Davood Abadi Farahani, 2015, Fouling reduction of emulsion polyvinylchloride ultrafiltration membranes blended by PEG: the effect of additive concentration and coagulation bath temperature, Desalin. Water Treat., 1 Rabiee, 2014, Preparation and characterization of emulsion poly(vinyl chloride) (EPVC)/TiO2 nanocomposite ultrafiltration membrane, J. Membr. Sci., 472, 185, 10.1016/j.memsci.2014.08.051 Kraume, 2010, Membrane bioreactors in waste water treatment −status and trends, Chem. Eng. Technol., 33, 1251, 10.1002/ceat.201000104 Krzeminski, 2012, Impact of temperature on raw wastewater composition and activated sludge filterability in full-scale MBR systems for municipal sewage treatment, J. Membr. Sci., 423–424, 348, 10.1016/j.memsci.2012.08.032 Zuriaga-Agustí, 2013, Influence of extraction methods on proteins and carbohydrates analysis from MBR activated sludge flocs in view of improving EPS determination, Sep. Purif. Technol., 112, 1, 10.1016/j.seppur.2013.03.048 Chen, 2012, Progress in modified MBR with TiO2 for wastewater reuse, Adv. Mater. Res., 535, 2236, 10.4028/www.scientific.net/AMR.535-537.2236 Zhao, 2014, Highly effective antifouling performance of PVDF/graphene oxide composite membrane in membrane bioreactor (MBR) system, Desalination, 340, 59, 10.1016/j.desal.2014.02.022 Amirilargani, 2010, Synthesis and characterization of polyethersulfone membranes, J. Polym. Res., 17, 363, 10.1007/s10965-009-9323-6 Chakrabarty, 2008, Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive, J. Membr. Sci., 315, 36, 10.1016/j.memsci.2008.02.027 Yu, 2005, Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment, Sep. Purif. Technol., 45, 8, 10.1016/j.seppur.2005.01.012 Liu, 2012, TiO2 and polyvinyl alcohol (PVA) coated polyester filter in bioreactor for wastewater treatment, Water Res., 46, 1969, 10.1016/j.watres.2012.01.017 Liu, 2012, Low-cost antifouling PVC ultrafiltration membrane fabrication with Pluronic F 127: Effect of additives on properties and performance, Desalination, 307, 26, 10.1016/j.desal.2012.07.036 Mei, 2011, Preparation of porous PVC membrane via a phase inversion method from PVC/DMAc/water/additives, J. Appl. Polym. Sci., 120, 557, 10.1002/app.33219 Fan, 2014, Fabrication of polyvinyl chloride ultrafiltration membranes with stable antifouling property by exploring the pore formation and surface modification capabilities of polyvinyl formal, J. Membr. Sci., 464, 100, 10.1016/j.memsci.2014.04.005 Xu, 2002, Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent, J. Membr. Sci., 208, 203, 10.1016/S0376-7388(02)00261-2 Okuno, 1993, Influence of casting solution additive, degree of polymerization, and polymer concentration on poly(vinyl chloride) membrane properties and performance, J. Membr. Sci., 83, 199, 10.1016/0376-7388(93)85267-Z Xu, 2009, Polymer-nanoinorganic particles composite membranes: a brief overview, Front. Chem. Eng. China, 3, 318, 10.1007/s11705-009-0199-0 Maximous, 2010, Optimization of Al2O3/PES membranes for wastewater filtration, Sep. Purif. Technol., 73, 294, 10.1016/j.seppur.2010.04.016 Li, 2009, Effect of TiO2 nanoparticles on the surface morphology and performance of microporous PES membrane, Appl. Surf. Sci., 255, 4725, 10.1016/j.apsusc.2008.07.139 Oh, 2009, Preparation and characterization of PVDF/TiO2 organic–inorganic composite membranes for fouling resistance improvement, J. Membr. Sci., 345, 13, 10.1016/j.memsci.2009.08.003 Wu, 2008, Preparation and characterization of PES/TiO2 composite membranes, Appl. Surf. Sci., 254, 7080, 10.1016/j.apsusc.2008.05.221 Liu, 2008, A new method to prepare organic–inorganic hybrid membranes, Desalination, 221, 376, 10.1016/j.desal.2007.02.056 Maximous, 2010, Performance of a novel ZrO2/PES membrane for wastewater filtration, J. Membr. Sci., 352, 222, 10.1016/j.memsci.2010.02.021 Huang, 2012, Fabrication of polyethersulfone-mesoporous silica nanocomposite ultrafiltration membranes with antifouling properties, J. Membr. Sci., 423–424, 362, 10.1016/j.memsci.2012.08.029 Yan, 2005, Preparation of poly(vinylidene fluoride)(pvdf) ultrafiltration membrane modified by nano-sized alumina (Al2O3) and its antifouling research, Polymer, 46, 7701, 10.1016/j.polymer.2005.05.155 Shen, 2012, Preparation and characterization of ZnO/polyethersulfone (PES) hybrid membranes, Desalination, 293, 21, 10.1016/j.desal.2012.02.019 Maximous, 2009, Preparation, characterization and performance of Al2O3/PES membrane for wastewater filtration, J. Membr. Sci., 341, 67, 10.1016/j.memsci.2009.05.040 V. Vatanpour, M., Esmaeili, M.H.D.A. Farahani, Fouling reduction and retention increment of polyethersulfone nanofiltration membranes embedded by amine-functionalized multi-walled carbon nanotubes, Journal of Membrane Science. Shi, 2012, Preparation and characterization of PVDF/TiO2 hybrid membranes with different dosage of nano-TiO2, J. Membr. Sci., 389, 522, 10.1016/j.memsci.2011.11.022 Vatanpour, 2012, Novel antibifouling nanofiltration polyethersulfone membrane fabricated from embedding TiO2 coated multiwalled carbon nanotubes, Sep. Purif. Technol., 90, 69, 10.1016/j.seppur.2012.02.014 Zhang, 2013, Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics, J. Membr. Sci., 436, 163, 10.1016/j.memsci.2013.02.009 Hamid, 2011, Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO2) ultrafiltration membranes for humic acid removal, Desalination, 273, 85, 10.1016/j.desal.2010.12.052 Yang, 2006, Preparation and properties of polysulfone/TiO2 composite ultrafiltration membranes, J. Polym. Sci. B: Polym. Phys., 44, 879, 10.1002/polb.20715 Yang, 2007, The influence of nano-sized TiO2 fillers on the morphologies and properties of PSF UF membrane, J. Membr. Sci., 288, 231, 10.1016/j.memsci.2006.11.019 Boom, 1994, Mass transfer and thermodynamics during immersion precipitation for a two-polymer system: Evaluation with the system PES—PVP—NMP—water, J. Membr. Sci., 90, 231, 10.1016/0376-7388(94)80074-X Boom, 1992, Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive, J. Membr. Sci., 73, 277, 10.1016/0376-7388(92)80135-7 Cao, 2006, Effect of TiO2 nanoparticle size on the performance of PVDF membrane, Appl. Surf. Sci., 253, 2003, 10.1016/j.apsusc.2006.03.090 Rahimpour, 2011, TiO2 entrapped nano-composite PVDF/SPES membranes: preparation, characterization, antifouling and antibacterial properties, Desalination, 278, 343, 10.1016/j.desal.2011.05.049 Hong, 2012, Effects of nano sized zinc oxide on the performance of PVDF microfiltration membranes, Desalination, 302, 71, 10.1016/j.desal.2012.07.001 Sadrzadeh, 2013, Rational design of phase inversion membranes by tailoring thermodynamics and kinetics of casting solution using polymer additives, J. Membr. Sci., 441, 31, 10.1016/j.memsci.2013.04.009 Lee, 2003, Trade-off between thermodynamic enhancement and kinetic hindrance during phase inversion in the preparation of polysulfone membranes, Desalination, 159, 289, 10.1016/S0011-9164(03)90081-6 Keurentjes, 1989, K. van't Riet, Hydrophobicity measurements of microfiltration and ultrafiltration membranes, J. Membr. Sci., 47, 333, 10.1016/S0376-7388(00)83084-7 Palacio, 1999, Contact angles and external protein adsorption onto UF membranes, J. Membr. Sci., 152, 189, 10.1016/S0376-7388(98)00203-8 Vatanpour, 2012, TiO2 embedded mixed matrix PES nanocomposite membranes: influence of different sizes and types of nanoparticles on antifouling and performance, Desalination, 292, 19, 10.1016/j.desal.2012.02.006 Leo, 2012, Polysulfone membranes blended with ZnO nanoparticles for reducing fouling by oleic acid, Sep. Purif. Technol., 89, 51, 10.1016/j.seppur.2012.01.002 Sun, 2010, Improved antifouling property of PES ultrafiltration membranes using additive of silica-PVP nanocomposite, Ind. Eng. Chem. Res, 49, 790, 10.1021/ie900560e Rabiee, 2015, Gas permeation and sorption properties of poly(amide-12-b-ethyleneoxide)(Pebax1074)/SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation, J. Ind. Eng. Chem., 27, 223, 10.1016/j.jiec.2014.12.039 -l. Luo, 2006, Hydrophilic modification of poly(ether sulfone) used TiO2 nanoparticles by a sol–gel process, J. Mater. Process. Technol., 172, 431, 10.1016/j.jmatprotec.2005.11.004 Rahimpour, 2008, Coupling TiO2 nanoparticles with UV irradiation for modification of polyethersulfone ultrafiltration membranes, J. Membr. Sci., 313, 158, 10.1016/j.memsci.2007.12.075 Li, 2007, Morphologies and properties of poly(phthalazinone ether sulfone ketone) matrix ultrafiltration membranes with entrapped TiO2 nanoparticles, J. Appl. Polym. Sci., 103, 3623, 10.1002/app.25428 Madaeni, 2011, A new approach to improve antifouling property of PVDF membrane using in situ polymerization of PAA functionalized TiO2 nanoparticles, J. Membr. Sci., 380, 155, 10.1016/j.memsci.2011.07.006 Hong, 2002, Fouling control in activated sludge submerged hollow fiber membrane bioreactors, Desalination, 143, 219, 10.1016/S0011-9164(02)00260-6