Preparation and characterization of copper oxide nanofluid for heat transfer applications

Bennici S, Gervasini A, Ragaini V (2003) Preparation of highly dispersed CuO catalysts on oxide supports for de-NOx reactions. Ultrason Sonochem 10:61–64

Carnes CL, Klabunde KJ (2003) The catalytic methanol synthesis over nanoparticle metal oxide catalysts. J Mol Catal A: Chem 194:227–236

Choi SUS (1995) Enhancing thermal conductivity of fluids with nanoparticles. In: Signer DA, Wang HP (eds) Developments applications of non-newtonian flows, FED-vol. 231/MD-vol. 66, ASME, New York, pp 99–105

Darezereshki E, Bakhtiari F (2011) A novel technique to synthesis of tenorite (CuO) nanoparticles from low concentration CuSO4 solution. J Min Metall Sect B-Metall 47:73–78

Eastman JA, Choi SUS, Li S, Yu W, Thompson LJ (2001) Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Appl Phys Lett 78:718

Frietsch M, Zudock F, Goschnick J, Bruns M (2000) CuO catalytic membrane as selectivity trimmer for metal oxide gas sensors. Sens Actuators B: Chem 65:379–381

Godson L, Raja B, Mohan Lal D, Wongwises S (2010) Enhancement of heat transfer using nanofluids—an overview. Renew Sustain Energy Rev 14:629–641

Hagen KD (1999) Heat Transfer with Applications. Prentice-Hall, Upper Saddle River

Jwo CS, Teng TP, Chang J (2007) A simple model to estimate thermal conductivity of fluid with acicular nanoparticles. J Alloys Compd 434–435:569–571

Kothandaraman CP, Subramanyan S (2007) Heat and mass transfer data book, 6th edn. New Age International, New Delhi

Kurihara LK, Chow GM, Schoen PE (1995) Nanocrystalline metallic powders and films produced by the polyol method. Nanostruct Mater 6:607–613

Lee S, Choi SUS, Li S, Eastman JA et al (1999) Measuring thermal conductivity of fluids containing oxide nanoparticles. Trans Am Soc Mech Eng 121:280–289

Li CH, Peterson GP (2006) Experimental investigation of temperature and volume fraction variations on the effective thermal conductivity of nanoparticles suspensions (nanofluids). J Appl Phys 99:084314

Liu MS, Lin MCC, Huang IT, Wang CC (2006) Enhancement of thermal conductivity with CuO for nanofluids. Chem Eng Technol 29:72–77

Murshed SMS, Leong KC, Yang C (2005) Enhanced thermal conductivity of TiO2–water based nanofluids. Int J Therm Sci 44:367–373

Sukhorukov YP, Loshkareva NN, Samokhvalov AA, Naumov SV, Moskvin AS, Ovchinnikov AS (1998) Magnetic phase transitions in optical spectrum of magnetic semiconductor CuO. J Magn Magn Mater 183:356–358

Suresh S, Venkitaraj KP, Selvakumar P, Chandrasekar M (2011) Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids Surf A Physicochem Eng Asp 388:41–48

Vargaftik NB (1975) Tables of the thermophysical properties of liquids and gases, 2nd edn. Wiley, New York

Wang X, Xu X, Choi SUS (1999) Thermal conductivity of nanoparticle–fluid mixture. Thermophys Heat Transf 13:474–480

Xuan Y, Li Q (2003) Investigation on convective heat transfer and flow features of nanofluids. Int J Heat Transf 125:151–155

You TY, Niwa O, Tomita M, Andoo H, Suzuki M, Hirono S (2002) Characterization and electrochemical properties of highly dispersed copper oxide/hydroxide nanoparticles in graphite like carbon films prepared by RF sputtering method. Electrochem Commun 4:468–471

Zhu HT, Lin YS, Yin YS (2004) A novel one-step chemical method of preparation of copper nanofluids. J Coll Interface Sci 277:100–103