Preliminary tsunami analytical fragility functions proposal for Italian coastal residential masonry buildings
Tóm tắt
Từ khóa
Tài liệu tham khảo
Dall'Osso, 2004, Revision and improvement of the PTVA-3 model for assessing tsunami building vulnerability using “international expert judgement”: introducing the PTVA-4 model, Nat Hazards, 83, 1229, 10.1007/s11069-016-2387-9
Reese, 2011, Empirical building fragilities from observed damage in the 2009 South Pacific tsunami, Earth Sci Rev, 107, 156, 10.1016/j.earscirev.2011.01.009
Suppasri, 2011, Developing tsunami fragility curves based on the satellite remote sensing and the numerical modeling of the 2004 Indian Ocean tsunami in Thailand, Natural Hazards Earth Syst Sci, 11, 173, 10.5194/nhess-11-173-2011
Suppasri, 2013, Building damage characteristics based on surveyed data and fragility curves of the 2011 Great East Japan tsunami, Natural Hazards Earth Syst Sci, 66, 319, 10.1007/s11069-012-0487-8
Tinti, 2001, Impact of large tsunamis in the Messina Straits, Italy: the case of the 28 December 1908 tsunami, 139
Koshimura, 2009, Developing fragility functions for tsunami damage estimation using numerical model and post-tsunami data from Banda Aceh, Indonesia, Coastal Eng J, 51, 243, 10.1142/S0578563409002004
Peiris, 2004, Indian Ocean Tsunami: vulnerability functions for loss estimation in Sri Lanka, Proc Geotechnical Engineering for Disaster Mitigation and Rehabilitation, 2005, 411
Mallawaarachchi, 2008, The effects of cyclones, tsunami and earthquakes on built environments and strategies for reduced damage, J Natl Sci Found Sri Lanka, 36, 3, 10.4038/jnsfsr.v36i1.128
Tinti, 2003, The use of scenarios to evaluate the tsunami impact in southern Italy, Mar Geol, 199, 221, 10.1016/S0025-3227(03)00192-0
Macabuag J, Rossetto T. Towards the development of a method for generating analytical tsunami fragility functions. In Proc., 2nd European conference on earthquake engineering and seismology; 2014.
Nistor, 2011, Experimental and numerical modeling of tsunami loading on structures, Coastal Eng Proc, 1, 2, 10.9753/icce.v32.currents.2
ASCE/SEI 7-16 (American Society of Civil Engineers). Minimum Design Loads for Buildings and Other Structures, Reston, Virginia; 2017.
FEMA P-646 (Federal Emergency Management Agency). Guidelines for Design of Structures for Vertical Evacuation from Tsunamis, Redwood City, California; 2012.
Fukuyama H, Kato H, Ishihara T, Tajiri S, Tani M, Okuda Y et al. Structural design requirement on the tsunami evacuation buildings. (SDRTEB). US-Japan Cooperative Program in Natural Resources (UJNR), Tokyo; 2011.
Chock, 2015, The ASCE 7 tsunami loads and effects design standard for the United States, 437
Asai, 2012, Tsunami load evaluation based on damage observation after the 2011 great east Japan earthquake, Proc. Int. Symp. on Engineering Lessons Learned from the 2011 Great East Japan Earthquake
Macabuag, 2014, Sensitivity analyses of a framed structure under several tsunami design-guidance loading regimes
Al-Faesly, 2012, Experimental modeling of extreme hydrodynamic forces on structural models, Int J Protective Struct, 3, 477, 10.1260/2041-4196.3.4.477
Nistor, Ioan, et al. Tsunami-induced forces on structures. Handbook of coastal and ocean engineering; 2010. pp. 261–286.
Belliazzi, 2021, Simplified approach to assess the vulnerability of masonry buildings under tsunami loads, Proc Inst Civ Eng Struct Build, 10.1680/jstbu.20.00147
Sorrentino, 2017, Review of out-of-plane seismic assessment techniques applied to existing masonry buildings, Int J Architectural Heritage, 11, 2
Augenti, 2010, Learning from construction failures due to the 2009 L’Aquila, Italy, earthquake, J Perform Constr Facil, 24, 536, 10.1061/(ASCE)CF.1943-5509.0000122
Petrone, 2017, Fragility assessment of a RC structure under tsunami actions via nonlinear static and dynamic analyses, Eng Struct, 136, 36, 10.1016/j.engstruct.2017.01.013
Turnsek, 1971, Some experimental results on the strength of brick masonry walls, Proc., 2nd International Brick Masonry Conference, 149
Augenti, 2019
Eurocode 6. Design of masonry structures – Part 1-1: General rules for reinforced and unreinforced masonry structures, Brussels, Belgium, CEN; 2006.
IBC 2018. Norme Tecniche per le Costruzioni. Ministerial Decree, Rome, Italy; 2018. in Italian.
Prota, 2006, Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites, J Compos Constr, 10, 223, 10.1061/(ASCE)1090-0268(2006)10:3(223)
Lignola, 2008, Simple method for the design of jet grouted umbrellas in tunneling, J Geotech Geoenviron Eng, 134, 1778, 10.1061/(ASCE)1090-0241(2008)134:12(1778)
Magenes, 1997, In-plane seismic response of brick masonry walls, Earthquake Eng Struct Dyn, 26, 1091, 10.1002/(SICI)1096-9845(199711)26:11<1091::AID-EQE693>3.0.CO;2-6
Vlachakis, 2019, Out-of-plane seismic response and failure mechanism of masonry structures using finite elements with enhanced strain accuracy, Eng Fail Anal, 97, 534, 10.1016/j.engfailanal.2019.01.017
Belliazzi, 2018, Textile Reinforced Mortars systems: a sustainable way to retrofit structural masonry walls under tsunami loads, Int J Masonry Res Innov, 3, 200, 10.1504/IJMRI.2018.093484
Proença, 2019, Structural window frame for in-plane seismic strengthening of masonry wall buildings, Int J Architectural Heritage, 13, 98, 10.1080/15583058.2018.1497234
Augenti N, Parisi F, Acconcia E. New tools for non-linear analysis of masonry buildings. In Proc., 14th European Conference on Earthquake Engineering; 2010.
Baradaranshoraka, 2019, Characterization of coastal flood damage states for residential buildings, ASCE-ASME J Risk Uncert Eng Syst, Part A: Civ Eng, 5, 04019001, 10.1061/AJRUA6.0001006
Paleo-Torres, 2020, Vulnerability of Florida residential structures to hurricane induced coastal flood, Eng Struct, 220, 10.1016/j.engstruct.2020.111004
Porter, 2007, Creating fragility functions for performance based earthquake engineering, Earthquake Spectra, 23, 471, 10.1193/1.2720892
Suppasri, 2012, Damage characteristic and field survey of the 2011 Great East Japan Tsunami in Miyagi Prefecture, Coast Eng J, 54, 10.1142/S0578563412500052
ISTAT 2011. Original website: http://dati.istat.it/.
O.P.C.M. 3274. Primi elementi in materia di criteri generali per la classificazione sismica del territorio nazionale e di normative tecniche per le costruzioni in zona sismica, Rome, Italy; 2018. in Italian.
CIBC 1981. Istruzioni relative alla normativa tecnica per la riparazione ed il rafforzamento degli edifici in muratura danneggiati dal sisma. Ministerial circular, Rome, Italy; 1981. in Italian.
CIBC 2009. Istruzioni per l'applicazione delle «Nuove norme tecniche per le costruzioni» di cui al decreto ministeriale 14 gennaio 2008. Ministerial circular, Rome, Italy; 2009. in Italian.
CIBC 2019. Circolare applicativa delle nuove norme tecniche per le costruzioni approvate con D.M. 17 gennaio 2018. Ministerial circular, Rome, Italy; 2019. in Italian.
Rondelet, 1841
Curioni, 1881
Breymann, 1884
Marullier, 1914
Milani, 1920
IBC 1987. Norme tecniche per la progettazione, esecuzione e collaudo degli edifici in muratura e per il loro consolidamento. Ministerial Decree, Rome, Italy; 1987. in Italian.
IBC 2008. Norme Tecniche per le Costruzioni. Ministerial Decree, Rome, Italy; 2008. in Italian.
De Risi, 2017, Bayesian tsunami fragility modeling considering input data uncertainty, Stoch Env Res Risk Assess, 31, 1253, 10.1007/s00477-016-1230-x
Charvet, 2014, Empirical fragility assessment of buildings affected by the 2011 Great East Japan tsunami using improved statistical models, Nat Hazards, 73, 951, 10.1007/s11069-014-1118-3
Tinti, 2005, Assessing the hazard related to tsunamis of tectonic origin: a hybrid statistical-deterministic method applied to southern Italy coasts, ISET J Earthquake Technol, 42, 189
D’Ambra, 2018, Experimental performance of FRCM retrofit on out-of-plane behaviour of clay brick walls, Composites Part B: Engineering, 148, 198, 10.1016/j.compositesb.2018.04.062