Preliminary results of hand arm vibration (HAV) exposures of chipping hammer operators in tropical weather: Analysis of exposures and protective gloves

2006 Ainsa, 2011, Experimental evaluation of uncertainty in hand arm vibration measurements, Int. J. Ind. Ergon., 41, 167, 10.1016/j.ergon.2011.01.002 Bovenzi, 1994, Hand-arm vibration syndrome among travertine workers: a follow up study, Occup. Environ. Med., 51, 361, 10.1136/oem.51.6.361 2013 De Silva, 2017, Assessment of hand arm vibration exposures of operators in Civil Engineering Construction Industry, Journal of the Construction Industry Development Authority (CIDA), 15, 33 Directive 2002/44/EC, 2002 Dong, 2004, An evaluation of the standardized chipping hammer test specified in ISO 8662-2, Ann. Occup. Hyg., 48, 39 Dong, 2009, Analysis of anti-vibration gloves mechanism and evaluation methods, J. Sound Vib., 321, 435, 10.1016/j.jsv.2008.09.044 Dong, 2014, Tool-specific performance of vibration-reducing gloves for attenuating palm-transmitted vibrations in three orthogonal directions, Int. J. Ind. Ergon., 44, 827, 10.1016/j.ergon.2014.09.007 Dong, 2002, Effectiveness of a transfer function method for evaluating vibration isolation performance of gloves when used with chipping hammers, Journal of Low Frequency Sound, Vibration, and Control, 21, 141, 10.1260/026309202321164711 Griffin, 1990 Griffin, 1998, Evaluating the effectiveness of gloves in reducing hazards hand transmitted vibration, Occup. Environ. Med., 55, 340, 10.1136/oem.55.5.340 Hamouda, 2017, Fingers vibration transmission performance of vibration reducing gloves, Int. J. Ind. Ergon., 62, 55, 10.1016/j.ergon.2016.11.012 Heaver, 2011, Hand-arm vibration syndrome: a common occupational hazard in industrialized countries, J. Hand Surg., 36 Hewitt, 2010, RR795 ISO 5349-1, 2001 ISO 5349-2, 2001 López-Alonso, 2013, Comparative analysis of exposure limit values of vibrating hand-held tools, Int. J. Ind. Ergon., 43, 218, 10.1016/j.ergon.2013.01.006 Madhavei, 2019, Whole body vibration exposures of roller compactors: characteristics and effect of waste rubber in damping the vibration, Int. J. Occup. Saf. Ergon., 24, 25 McDowell, 2013, Vibration-reducing gloves: transmissibility at the palm of the hand in three orthogonal directions, Ergonomics, 56, 1823, 10.1080/00140139.2013.838642 Milosevic, 2012, Evaluation of protective gloves and working techniques for reducing hand-arm vibration exposure in the workplace, J. Occup. Health, 54, 250, 10.1539/joh.11-0176-BR Necking, 2004, Hand muscle pathology after long-term vibration exposure, J. Hand Surg., 29, 10.1016/J.JHSB.2004.05.004 Phillips, 2007, Rock drills used in South African mines: a comparative study of noise and vibration levels, Ann. Occup. Hyg., 51, 305 Rakheja, 2002, Estimation of toolspecific isolation performance of anti-vibration gloves, Int. J. Ind. Ergon., 30, 71, 10.1016/S0169-8141(02)00071-9 Rempel, 2018, Electrical rotary ver pneumatic rock drill : difference in handle vibration and productivity drilling into concrete Rezali, 2016, Transmission of vibration through gloves: effects of material thickness, Ergonomics, 59, 1026, 10.1080/00140139.2015.1102334 Roseiro, 2016, Hand-arm and whole-body vibrations induced in cross motorcycle and bicycle drivers, Int. J. Ind. Ergon., 56, 150, 10.1016/j.ergon.2016.10.008 Roseiro, 2018, Analysis of hand-arm vibration syndrome in drummers, Int. J. Ind. Ergon., 66, 110, 10.1016/j.ergon.2018.02.014 Su, 2012, The clinical features of hand-arm vibration syndrome in a warm environment—a review of the literature, J. Occup. Health, 54, 10.1539/joh.12-0089-RA Su, 2014, A cross sectional study on hand-arm vibration syndrome among a group of tree fellers in a tropical environment, Ind. Health, 52, 367, 10.2486/indhealth.2013-0137 Swuste, 1997, Application of design analysis to solution generation: hand arm vibrations in Foundation pile head removal in the construction Industry, Saf. Sci., 27, 85, 10.1016/S0925-7535(97)00072-6 Vihlborg, 2017, Association between vibration exposure and hand-arm vibration symptoms in a Swedish mechanical industry, Int. J. Ind. Ergon., 62, 77, 10.1016/j.ergon.2017.02.010 Virokannas, 1994, Health risk assessment of noise, hand-arm vibration and cold in railway track maintenance, Int. J. Ind. Ergon., 13, 247, 10.1016/0169-8141(94)90071-X Wimer, 2010, Effects of gloves on the total grip strength applied to cylindrical handles, Int. J. Ind. Ergon., 40, 574, 10.1016/j.ergon.2010.05.004 Xiao, 2019, Cold water immersion test (10 °C, 10 min) for diagnosing vibration-induced white finger among a group of polishers in a subtropical environment, Int. Arch. Occup. Environ. Health, 92, 865, 10.1007/s00420-019-01425-4 Xu, 2014, An examination of the handheld adapter approach for measuring hand-transmitted vibration exposure, Measurement, 47, 64, 10.1016/j.measurement.2013.08.037 Yao, 2020