Preliminary experimental study on the performance of CO2 capture prototype based on temperature swing adsorption (TSA)

Aquino, 2020, CO2 adsorption capacity of zeolites synthesized from coal fly ashes, Fuel, 276, 10.1016/j.fuel.2020.118143 Ben-Mansour, 2018, An efficient temperature swing adsorption (TSA) process for separating CO2 from CO2/N2 mixture using Mg-MOF-74, Energy Conversion and Management, 156, 10, 10.1016/j.enconman.2017.11.010 Bonjour, 2005, A TSA process with indirect heating and cooling: parametric analysis and scaling-up to practical sizes, Chemical Engineering and Processing: Process Intensification, 44, 969, 10.1016/j.cep.2005.01.002 Chen, 2021, The Thermodynamics-Based Benchmarking Analysis on Energy-Efficiency Performance of CO2 Capture Technology: Temperature Swing Adsorption as Case Study, Energy Technology, 9, 10.1002/ente.202000756 Cho, 2004, A 2-stage PSA process for the recovery of CO2 from flue gas and its power consumption, Studies in Surface Science and Catalysis, 153, 405, 10.1016/S0167-2991(04)80287-8 Clausse, 2011, Numerical parametric study on CO2 capture by indirect thermal swing adsorption, International Journal of Greenhouse Gas Control, 5, 1206, 10.1016/j.ijggc.2011.05.036 Coleman, 2009 D, J., J, W., C, L., 2021, Direct Air Capture Kickoff Meeting, Direct Air Capture Kickoff Meeting. Divekar, 2020, Improved CO2 recovery from flue gas by layered bed Vacuum Swing Adsorption (VSA), Separation and Purification Technology, 234, 10.1016/j.seppur.2019.05.036 Durán, 2020, Vacuum swing CO2 adsorption cycles in Waste-to-Energy plants, Chemical Engineering Journal, 382, 10.1016/j.cej.2019.122841 Esmaeili, 2019, Accelerated CO2 capture on adsorbent coated finned tube: An experimental study, Energy, 187, 10.1016/j.energy.2019.116014 Fatemeh Hosseini, 2017, Mathematical modeling of rapid temperature swing adsorption; the role of influencing parameters, Separation and Purification Technology, 183, 181, 10.1016/j.seppur.2017.03.017 Gao, 2020, Honeycomb-carbon-fiber-supported amine-containing nanogel particles for CO2 capture using a rotating column TVSA, Chemical Engineering Journal, 383, 10.1016/j.cej.2019.123123 Guo, 2020, Feasible roadmap for CCS retrofit of coal-based power plants to reduce Chinese carbon emissions by 2050, Applied Energy, 259, 10.1016/j.apenergy.2019.114112 Hefti, 2016, On the potential of phase-change adsorbents for CO2 capture by temperature swing adsorption, Faraday Discussions, 192, 153, 10.1039/C6FD00040A IPCC, I. P. O. C., 2018, Special Report on Global Warming of 1.5°C (Report), Incheon, South Korea, IPCC, Intergovernmental Panel On Climate. Jiang, 2019, Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption, Applied Energy, 245, 1, 10.1016/j.apenergy.2019.04.006 Jiang, 2020, CO2 capture from dry flue gas by means of VPSA, TSA and TVSA, Journal of CO2 Utilization, 35, 153, 10.1016/j.jcou.2019.09.012 Joss, 2017, Rational design of temperature swing adsorption cycles for post-combustion CO2 capture, Chemical Engineering Science, 158, 381, 10.1016/j.ces.2016.10.013 Khurana, 2016, Simulation and optimization of a 6-step dual-reflux VSA cycle for post-combustion CO2 capture, Chemical Engineering Science, 152, 507, 10.1016/j.ces.2016.06.033 Lei, 2013, Thermal Swing Adsorption Process for Carbon Dioxide Capture and Recovery: Modeling, Simulation, Parameters Estimability, and Identification. Industrial & Engineering Chemistry Research, 52, 7526, 10.1021/ie3029152 Li, 2016, Experiment and simulation for separating CO2/N2 by dual-reflux pressure swing adsorption process, Chemical Engineering Journal, 297, 315, 10.1016/j.cej.2016.03.075 Lillia, 2018, A comprehensive modeling of the hybrid temperature electric swing adsorption process for CO2 capture, International Journal of Greenhouse Gas Control, 74, 155, 10.1016/j.ijggc.2018.04.012 Liu, 2019, Experimental investigation on separation and energy-efficiency performance of temperature swing adsorption system for CO2 capture, Separation and Purification Technology, 227, 10.1016/j.seppur.2019.06.008 Liu, 2012, Onsite CO2 Capture from Flue Gas by an Adsorption Process in a Coal-Fired Power Plant, Industrial & Engineering Chemistry Research, 51, 7355, 10.1021/ie3005308 Marx, 2016, Temperature Swing Adsorption for Postcombustion CO2 Capture: Single- and Multicolumn Experiments and Simulations, Industrial & Engineering Chemistry Research, 55, 1401, 10.1021/acs.iecr.5b03727 Mendes, 2017, Separation of CO2 /N2 on binderless 5A zeolite, Journal of CO2 Utilization, 20, 224, 10.1016/j.jcou.2017.05.003 Merel, 2008, Experimental Investigation on CO2 Post−Combustion Capture by Indirect Thermal Swing Adsorption Using 13X and 5A Zeolites, Industrial & Engineering Chemistry Research, 47, 209, 10.1021/ie071012x Morales-Ospino, 2020, Assessment of CO2 desorption from 13X zeolite for a prospective TSA process, Adsorption, 26, 813, 10.1007/s10450-019-00192-5 Ntiamoah, 2016, CO2 Capture by Temperature Swing Adsorption: Use of Hot CO2-Rich Gas for Regeneration, Industrial & Engineering Chemistry Research, 55, 703, 10.1021/acs.iecr.5b01384 Park, 2002, Numerical Analysis on the Power Consumption of the PSA Process for Recovering CO2 from Flue Gas, Industrial & Engineering Chemistry Research, 41, 4122, 10.1021/ie010716i Plaza, 2019, Evaluation of a novel multibed heat-integrated vacuum and temperature swing adsorption post-combustion CO2 capture process, Applied Energy, 250, 916, 10.1016/j.apenergy.2019.05.079 Plaza, 2019, Development of carbon-based vacuum, temperature and concentration swing adsorption post-combustion CO2 capture processes, Chemical Engineering Journal, 375, 10.1016/j.cej.2019.122002 Qasem, 2018, Adsorption breakthrough and cycling stability of carbon dioxide separation from CO2/N2/H2O mixture under ambient conditions using 13X and Mg-MOF-74, Applied Energy, 230, 1093, 10.1016/j.apenergy.2018.09.069 Shen, 2012, Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads, Industrial & Engineering Chemistry Research, 51, 5011, 10.1021/ie202097y Sjostrom, 2010, Evaluation of solid sorbents as a retrofit technology for CO2 capture, Fuel, 89, 1298, 10.1016/j.fuel.2009.11.019 Song, 2016, Reducing energy consumption of advanced PTSA CO2 capture process―Experimental and numerical study, Journal of the Taiwan Institute of Chemical Engineers, 64, 69, 10.1016/j.jtice.2015.12.006 Su, 2012, CO2 capture from gas stream by zeolite 13X using a dual-column temperature/vacuum swing adsorption, Energy & environmental science, 5, 9021, 10.1039/c2ee22647b Susarla, 2015, Energy and cost estimates for capturing CO2 from a dry flue gas using pressure/vacuum swing adsorption, Chemical Engineering Research and Design, 102, 354, 10.1016/j.cherd.2015.06.033 Tlili, 2009, Carbon dioxide capture and recovery by means of TSA and/or VSA, International Journal of Greenhouse Gas Control, 3, 519, 10.1016/j.ijggc.2009.04.005 Vega, 2020, Current status of CO2 chemical absorption research applied to CCS: Towards full deployment at industrial scale, Applied Energy, 260, 10.1016/j.apenergy.2019.114313 Wurzbacher, 2011, Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel, Energy & environmental science, 4, 3584, 10.1039/c1ee01681d Xu, 2019, Application of the Thermodynamic Cycle to Assess the Energy Efficiency of Amine-Based Absorption of Carbon Capture, Energies, 12, 2504, 10.3390/en12132504 Yan, 2016, CO2 capture from dry flue gas by pressure vacuum swing adsorption: A systematic simulation and optimization, International Journal of Greenhouse Gas Control, 51, 1, 10.1016/j.ijggc.2016.04.005 Zhang, 2014, Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds, Chemical Engineering Science, 116, 306, 10.1016/j.ces.2014.05.018 Zhang, 2014, Energy consumption analysis for CO2 separation from gas mixtures, Applied Energy, 130, 237, 10.1016/j.apenergy.2014.05.057 Zhao, 2020, Understanding the effect of H2O on CO2 adsorption capture: mechanism explanation, quantitative approach and application, Sustainable Energy & Fuels, 4, 5970, 10.1039/D0SE01179G Zhao, 2017, Impact of operating parameters on CO2 capture using carbon monolith by Electrical Swing Adsorption technology (ESA), Chemical Engineering Journal, 327, 441, 10.1016/j.cej.2017.06.123 Zhao, 2017, Carbon pump: Fundamental theory and applications, Energy, 119, 1131, 10.1016/j.energy.2016.11.076 Zhao, 2018, Thermodynamic research of adsorbent materials on energy efficiency of vacuum-pressure swing adsorption cycle for CO2 capture, Applied Thermal Engineering, 128, 818, 10.1016/j.applthermaleng.2017.09.074 Zhao, 2017, Performance analysis of temperature swing adsorption for CO2 capture using thermodynamic properties of adsorbed phase, Applied Thermal Engineering, 123, 205, 10.1016/j.applthermaleng.2017.05.042 Zhao, 2019, A comprehensive performance evaluation of temperature swing adsorption for post-combustion carbon dioxide capture, Renewable and Sustainable Energy Reviews, 114, 10.1016/j.rser.2019.109285 Zhao, 2017, A comparative study on CO2 capture performance of vacuum-pressure swing adsorption and pressure-temperature swing adsorption based on carbon pump cycle, Energy, 137, 495, 10.1016/j.energy.2017.01.158