Preliminary core characterization of a Generation IV lead fast reactor DEMO: Goals, design rationales and options

Energy Conversion and Management - Tập 51 - Trang 1806-1812 - 2010
Sara Bortot1, Carlo Artioli2, Giacomo Grasso3, Vincenzo Peluso2, Marco E. Ricotti1
1Politecnico di Milano, Dep. of Energy, Nuclear Division-CeSNEF, via La Masa, 34 – 20156 Milano, Italy
2National Agency for the New Technologies, Energy and Environment (FPN-FISNUC ENEA), via Martiri di Monte Sole, 4 – 40129 Bologna, Italy
3Nuclear Engineering Laboratory (LIN) of Montecuccolino, Università degli Studi di Bologna, via dei Colli, 16 – 40136 Bologna, Italy

Tài liệu tham khảo

A technology roadmap for Generation IV nuclear energy systems. Technical Report GIF-002-00, US DOE Nuclear Energy Research Advisory Committee and the Generation IV International Forum; December 2002. Cinotti L, et al. The potential of the LFR and the ELSY Project. In: 2007 International congress on advances in nuclear power plants (ICAPP 07), Nice Acropolis, France, May 13–18; 2007. Sarotto M, et al. ELSY core design static, dynamic and safety parameters with the open square FA. Technical Report D8 Deliverable, EURATOM; April 2009. Grasso G, et al. On the effectiveness of the ELSY concept with respect to Minor Actinides transmutation capabilities. In: Tenth information exchange meeting on actinide and fission product partitioning and transmutation (IEMPT10), Mito, Japan, October 6–10; 2008. Bortot S, et al. Preliminary core characterization for an ELSY-oriented demonstrative reactor. In: Nuclear 2009, Piteşti, Romania, May 27–29; 2009. Cinotti L, et al. The ELSY project. In: International conference on the physics of reactors 2008 (PHYSOR 2008), Interlaken, Switzerland, September 14–19; 2008. Cinotti L. Reactor assembly preliminary configuration. Technical Report ELSY DOC 08 049, Del Fungo Giera Energia; June 2008. Weisenburger A, et al. T91 cladding tubes with and without modified FeCrAl coatings exposed in LBE at different flow, stress and temperature conditions. In: IV International workshop on materials for HLM cooled reactors and related technologies, Rome, Italy, May 21–23; 2007. Aa Vv. Handbook on lead–bismuth eutectic alloy and lead properties, materials compatibility, thermalhydraulics and technologies. Technical Report, OECD-NEA; 2007. Müller, 2002, Results of steel corrosion tests in flowing liquid Pb/Bi at 420–600°C after 2000h, J Nucl Mater, 301, 406, 10.1016/S0022-3115(01)00725-5 Cinotti L. Private communication; May 2009. Ruggieri JM, et al. ERANOS 2.1: international code system for GEN IV fast reactor analysis. In: International congress on advances in nuclear power plants (ICAPP 06), Reno, USA, June 4–8; 2006. Joint Evaluated File (JEF) project. The JEFF-3.1 nuclear data library. Technical Report JEFF Report 21, OECD/NEA; 2006. Rimpault G. Physics documentation of ERANOS: the ECCO cell code. Technical Report RT-SPRC-LEPh-97-001, CEA; October 1997. Palmiotti G, Carrico CB, Lewis EE. Variational nodal method for the solution of the diffusion and transport equation in two and three dimensional geometries. Technical Report NT-SPRC-LEPh-91-208, CEA; June 1991. Thetford R, Sobolev V. Recommended properties of fuel, cladding and coolant for EFIT. Technical Report D3.1.4 Deliverable, EUROTRANS; November 2005.