Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks
Tóm tắt
Từ khóa
Tài liệu tham khảo
Narutaki, 1979, Tool wear and cutting temperature of CBN tools in machining of hardened steels, Annals of the CIRP, 28/1, 23
Hodgson, 1981, Turning hardened tool steels with Cubic Boron Nitride inserts, Annals of the CIRP, 30/1, 63, 10.1016/S0007-8506(07)60896-8
Chryssolouris, 1982, Turning of hardened steels using CBN tools, Journal of Applied Metal Working, 2, 100, 10.1007/BF02834207
Koenig, 1984, Machining of hard metals, Annals of the CIRP, 33/2, 417, 10.1016/S0007-8506(16)30003-8
Koenig, 1990, Machining hard materials with geometrically defined cutting edges, Annals of the CIRP, 39/1, 61, 10.1016/S0007-8506(07)61003-8
Toenshoff, 1995, Hard turning influences on workpiece properties, Transactions of the NAMRI/SME, 23, 215
Chou, 1997, Tool wear mechanism in continuous cutting of hardened tool steels, Wear, 212, 59, 10.1016/S0043-1648(97)00139-7
Matsumoto, 1999, Surface integrity generated by precision hard turning, Annals of the CIRP, 48/1, 59, 10.1016/S0007-8506(07)63131-X
Thiele, 1999, Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel, Journal of Materials Processing Technology, 94, 216, 10.1016/S0924-0136(99)00111-9
Toenshoff, 2000, Cutting hardened steel, Annals of the CIRP, 49/2, 1
Thiele, 2000, Effect of cutting-edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel, ASME Journal of Manufacturing Science and Engineering, 122, 642, 10.1115/1.1286369
Barry, 2001, Cutting tool wear in the machining of hardened steels. Part II: CBN cutting tool wear, Wear, 247, 152, 10.1016/S0043-1648(00)00528-7
Chou, 2002, Experimental investigation on CBN turning of hardened AISI 52100 steel, Journal of Materials Processing Technology, 124, 274, 10.1016/S0924-0136(02)00180-2
Özel, 2003, Modeling of Hard Part Machining: Effect of Insert Edge Preparation for CBN Cutting Tools, Journal of Materials Processing Technology, 141, 284, 10.1016/S0924-0136(03)00278-4
T. Özel, T.-K. Hsu, E. Zeren, Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel, International Journal of Advanced Manufacturing Technology, 2004, accepted for publication. DOI:10.1007/S00170-003-1878-5.
Grzesik, 1996, A revised model for predicting surface roughness in turning, Wear, 194, 143, 10.1016/0043-1648(95)06825-2
Fang, 1997, A new algorithm for developing a reference model for predicting surface roughness in finish machining of steels, International Journal of Production Research, 35, 179, 10.1080/002075497196046
Kopac, 2002, Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces, International Journal of Machine Tools and Manufacture, 42, 707, 10.1016/S0890-6955(01)00163-8
Feng, 2002, Development of empirical models for surface roughness prediction in finish turning, International Journal of Advanced Manufacturing Technology, 20, 348, 10.1007/s001700200162
Elanayar, 1995, Robust tool wear estimation with radial basis function neural networks, ASME Journal of Dynamic Systems, Measurement and Control, 117, 459, 10.1115/1.2801101
Dimla, 1997, Neural network solutions to the tool condition monitoring problem in metal cutting—a review critical review of methods, International Journal of Machine Tools and Manufacture, 39, 1219, 10.1016/S0890-6955(97)00020-5
Ghasempoor, 1999, Real time implementation of on-line tool condition monitoring in turning, International Journal of Machine Tools and Manufacture, 39, 1883, 10.1016/S0890-6955(99)00035-8
Li, 1999, A hybrid machining simulator based on predictive machining theory and neural network modeling, Journal of Material Processing Technology, 89/90, 224, 10.1016/S0924-0136(99)00068-0
Liu, 1999, On-line monitoring of flank wear in turning with multilayered feed-forward neural network, International Journal of Machine Tools and Manufacture, 39, 1945, 10.1016/S0890-6955(99)00020-6
Tsai, 2001, Predictions on surface finish in electrical discharge machining based upon neural network models, International Journal of Machine Tools and Manufacture, 41, 1385, 10.1016/S0890-6955(01)00028-1
Özel, 2002, Prediction of flank wear by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools, International Journal of Machine Tools and Manufacture, 42, 287, 10.1016/S0890-6955(01)00103-1
Sick, 2002, On-line and indirect tool wear monitoring in turning with artificial neural networks: a review of more than a decade of research, Mechanical Systems and Signal Processing, 16, 487, 10.1006/mssp.2001.1460
Scheffer, 2003, Development of a tool wear-monitoring system for hard turning, International Journal of Machine Tools and Manufacture, 43, 973, 10.1016/S0890-6955(03)00110-X
Choudry, 2003, Role of temperature and surface finish in predicting tool wear using neural network and design of experiments, International Journal of Machine Tools and Manufacture, 43, 747, 10.1016/S0890-6955(02)00166-9
Azouzi, 1997, On-line prediction of surface finish and dimensional deviation in turning using neural network based sensor fusion, International Journal of Machine Tools and Manufacture, 37, 1201, 10.1016/S0890-6955(97)00013-8
Risbood, 2003, Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process, Journal of Materials Processing Technology, 132, 203, 10.1016/S0924-0136(02)00920-2
Benardos, 2003, Predicting surface roughness in machining: a review, International Journal of Machine Tools and Manufacture, 43, 833, 10.1016/S0890-6955(03)00059-2
Feng, 2003, Surface roughness predictive modeling: neural networks versus regression, IIE Transactions, 35, 11, 10.1080/07408170304433
T. Özel, Y. Karpat, Prediction of surface roughness and tool wear in finish dry hard turning using back propagation neural networks, In CD-Proceedings of 17th International Conference on Production Research, August 3–7, 2003, Blacksburg, VA.
Hayken, 1999
M. Riedmiller, A direct method for faster backpropagation learning, Proceedings of the 1993 IEEE International Conference on Neural Networks (ICNN 93), vol. 1, San Francisco, pp. 586–591.
Reed, 1999
Hagan, 1996