Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Dự đoán quan hệ ứng suất-biến dạng ngoài trục của gỗ dưới tải trọng nén
Tóm tắt
Các thử nghiệm nén đơn trục đã được tiến hành với các mẫu vật liệu gỗ từ cây thông Agathis (Agathis sp.) và cây Katsura (Cercidiphyllum japonicum Sieb. et Zucc.) với các giá trị góc ngoài trục khác nhau, được xác định là góc giữa trục thớ và trục theo hướng tải trọng. Mối quan hệ ứng suất-biến dạng thu được đã được hồi quy vào phương trình Ramberg–Osgood, và đã được dự đoán bằng cách xấp xỉ mối quan hệ giữa các tham số có trong phương trình hồi quy và góc ngoài trục vào công thức của Hankinson. Các so sánh giữa các mối quan hệ ứng suất-biến dạng thu được từ thử nghiệm và dự đoán cho thấy rằng mối quan hệ ứng suất-biến dạng nén ngoài trục có thể được dự đoán hiệu quả bằng cách sử dụng các mối quan hệ trong các trục đối xứng.
Từ khóa
Tài liệu tham khảo
Ashkenazi EK (1959) On the problem of strength anisotropy on construction materials. Zh Tekh Fiz 29:374–380 (in russian)
Cowin SC (1979) On the strength anisotropy of bone and wood. J Appl Mech Trans ASME 46:832–838
Goodman JR, Bodig J (1971) Orthotropic strength of wood in compression. Wood Sci 4:83–94
Hankinson RL (1921) Investigation of crushing strength of spruce at varying angles of grain. Air Service Information Circular, 3 (259), Material Section Report No. 130
Holmberg H (2000) Influence of grain angle on Brinell hardness of Scots pine (Pinus sylvestris L.). Holz Roh- Werkst 58:91–95
Jenkin CF (1920) Strength in directions inclined to the grain. Report on materials of construction used in aircraft and aircraft engines. His Majesty Stationary Office, London, 102–104
Kim KY (1986) A note on the Hankinson formula. Wood Fiber Sci 18:345–348
Kon T (1948) On the law of variation of the modulus of elasticity for bending in wooden beams. Bull Hokkaido Univ Dept Eng 1:157–166
Kitahara K (1956) Experimental characterization of physical and machining properties of wood. Sangyo Tosho, Tokyo, 104
Lang LM, Bejo L, Szlai J, Kovacs Z, Anderson RB (2002) Orthotropic strength and elasticity of hardwoods in relation to composite manufacture II. Orthotropy of compression strength and elasticity. Wood Fiber Sci 34:350–365
Lekhnitskii SG (1963) Theory of elasticity of an anisotropic elastic body. Holden Day, San Francisco, 104
Liu JY (1984) Evaluation of the tensor polynomial strength theory for wood. J Compos Mater 18:216–226
Liu JY (2002) Analysis of off-axis tension test of wood specimens. Wood Fiber Sci 34:205–211
Mishiro A (1996) Effect of grain angle and ring angles on ultrasonic velocity in wood. Mokuzai Gakkaishi 42:211–215
Osgood WR (1946) Stress-strain formulas. J Aero Sci 13:45–48
Radcliffe BM (1965) A theoretical evaluation of Hankinson formula for modulus of elasticity of wood at an angle to the grain. Quart Bull Michigan Agr Exp Sta 48:286–295
Ramberg W, Osgood WR (1943) Description of stress-strain curves by three parameters. NACA, TN-902
Reiterer A, Stanzl-Tschegg SE (2001) Compressive behavior of softwood under uniaxial loading at different orientations to the grain. Mech Mater 33:705–715
Yoshihara H, Ohta M (1991) A failure criterion which enables the prediction of the failing direction for orthotropic materials. Mokuzai Gakkaishi 37:511–516
Yoshihara H, Ohta M (1993) Stress-strain relationship of wood in the plastic region I. Examination of the applicability of plasticity theories. Mokuzai Gakkaishi 38:759–763
Yoshihara H, Ohta M (1994) Stress-strain relationship of wood in the plastic region II. Formulation of the equivalent stress-equivalent plastic strain relationship. Mokuzai Gakkaishi 40:263–267
Yoshihara H, Ohta M (2000) Estimation of the shear strength of wood by uniaxial-tension tests of off-axis specimens. J Wood Sci 46:159–163