Prediction of tensile strength of biochar filled polylactic acid composites via box-behnken design

Journal of Engineering Research - Trang 100142 - 2023
Vianney Andrew Yiga1, Michael Lubwama1,2, Denis Karemani1, Denis Bbosa3, Emmanuel B.O. Olotu4, Peter Wilberforce Olupot1, Faith Natukunda3
1Department of Mechanical Engineering, Makerere University, Kampala, Uganda
2Africa Center of Excellence in Materials, Product Development and Nanotechnology, Makerere University, Kampala, Uganda
3Faculty of Applied Science and Technology, Mbarara University of Science and Technology, Mbarara, Uganda
4School of Engineering and Applied Sciences, Kampala International University, Bushenyi, Uganda

Tài liệu tham khảo

Ahmed, 2021, Electrical and mechanical properties of sugarcane bagasse pyrolyzed biochar reinforced polyvinyl alcohol biocomposite films, J. Compos. Sci., 5, 249, 10.3390/jcs5090249 Alenezi, 2023, Prediction of adsorption parameters for hydrogen sulfide removal from synthetic wastewater using box-behnken design, J. Eng. Res., 10.1016/j.jer.2023.100067 Anaya, 2022, Extended hyperspectral characterization of plastic automotive parts via acousto-optic tunable filter and fourier transform infrared spectrometry, Infrared Phys. Technol., 127, 10.1016/j.infrared.2022.104402 de Araújo Morandim-Giannetti, 2018, Polypropylene/chemically treated coir composites: optimizing coir delignification conditions using central composite design, Cellulose, 25, 1159, 10.1007/s10570-017-1617-y Arrigo, 2020, Poly (lactic acid)–biochar biocomposites: effect of processing and filler content on rheological, thermal, and mechanical properties, Polymers, 12, 892, 10.3390/polym12040892 Assimeddine, 2023, Improvement of photocatalytic degradation of methyl orange by impregnation of natural clay with nickel: optimization using the Box-Behnken design (BBD), Environ. Sci. Pollut. Res., 30, 62494, 10.1007/s11356-023-26417-3 Awad, 2020, The influence of adding marble and granite dust on the mechanical and physical properties of PP composites, J. Therm. Anal. Calorim., 140, 2615, 10.1007/s10973-019-09030-w Azmi, 2023, Exploring The dominant factors of chemical adsorption in enhanced oil recovery: an analytical investigation, Egypt. J. Chem., 10.21608/ejchem.2023.200043.7728 Ba-Abbad, 2015, Optimization of nickel oxide nanoparticle synthesis through the sol–gel method using Box–Behnken design, Mater. Des., 86, 948, 10.1016/j.matdes.2015.07.176 Bajwa, 2019, Characterization of bio-carbon and ligno-cellulosic fiber reinforced bio-composites with compatibilizer, Constr. Build. Mater., 204, 193, 10.1016/j.conbuildmat.2019.01.068 Barad, 2014, Design of experiments (DOE)—a valuable multi-purpose methodology, Appl. Math., 2014 Basiji, 2010, The effects of fiber length and fiber loading on the mechanical properties of wood-plastic (polypropylene) composites, Turk. J. Agric. For., 34, 191 Bauer, 2022, Plastics and climate change breaking carbon lock-ins through three mitigation pathways, One Earth, 5, 361, 10.1016/j.oneear.2022.03.007 Call, 2019, Smallholder responses to climate anomalies in rural Uganda, World Dev., 115, 132, 10.1016/j.worlddev.2018.11.009 Chaitanya, 2020, Microwave-synthesized Mg+ 2 doped jute fibers and their application as a reinforcement in biocomposites, Compos. Part B: Eng., 197, 10.1016/j.compositesb.2020.108154 Chaker, 2021, Modeling and box-behnken design optimization of photocatalytic parameters for efficient removal of dye by lanthanum-doped mesoporous TiO2, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2020.104584 Chen, 2019, Expanded graphite assistant construction of gradient-structured char layer in PBS/Mg (OH) 2 composites for improving flame retardancy, thermal stability and mechanical properties, Compos. Part B: Eng., 177, 10.1016/j.compositesb.2019.107402 Chong, 2021, The potentials of corn waste lignocellulosic fibre as an improved reinforced bioplastic composites, J. Polym. Environ., 29, 363, 10.1007/s10924-020-01888-4 Das, 2016, Biocomposites from waste derived biochars: mechanical, thermal, chemical, and morphological properties, Waste Manag., 49, 560, 10.1016/j.wasman.2015.12.007 Das, 2017, Biochar to the rescue: balancing the fire performance and mechanical properties of polypropylene composites, Polym. Degrad. Stab., 144, 485, 10.1016/j.polymdegradstab.2017.09.006 Feng, 2020, Performance comparison of four kinds of straw/PLA/PBAT wood plastic composites, BioResources, 15, 2596, 10.15376/biores.15.2.2596-2604 Ganesan, 2021, Optimisation of mechanical properties in saw-dust/woven-jute fibre/polyester structural composites under liquid nitrogen environment using response surface methodology, Polymers, 13, 2471, 10.3390/polym13152471 Giri, 2023, Optimization of different process parameters for the removal efficiency of fluoride from aqueous medium by a novel bio-composite using Box-Behnken design, J. Environ. Chem. Eng., 11, 10.1016/j.jece.2022.109232 Graupner, 2016, Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids, Compos. Part A: Appl. Sci. Manuf., 81, 158, 10.1016/j.compositesa.2015.10.040 Haeldermans, 2021, Poly (lactic acid) bio-composites containing biochar particles: Effects of fillers and plasticizer on crystallization and thermal properties, Express Polym. Lett., 15, 10.3144/expresspolymlett.2021.30 Hassan, 2019, Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology, J. Mater. Res. Technol., 8, 3517, 10.1016/j.jmrt.2019.06.026 Hong, 2021, The current status of opportunities for rice cultivation in Uganda, J. Korean Soc. Int. Agric., 33, 67, 10.12719/KSIA.2021.33.1.67 Isam, 2023, Optimization and modelling of Pb (II) and Cu (II) adsorption onto red algae (Gracilaria changii)-based activated carbon by using response surface methodology, Biomass-.-. Convers. Biorefinery, 10.1007/s13399-023-04150-8 Izzi, 2023, Thermophilic biohydrogen production from optimized enzymatic pretreatment of palm oil mill effluent via box-behnken design, J. Eng. Res., 11, 10.1016/j.jer.2023.100054 Joffe, 2003, Strength and adhesion characteristics of elementary flax fibres with different surface treatments, Compos. Part A: Appl. Sci. Manuf., 34, 603, 10.1016/S1359-835X(03)00099-X Kavitha, 2021, Flame retarding cardanol based novolac-epoxy/rice husk composites, Mater. Chem. Phys., 263, 10.1016/j.matchemphys.2021.124225 Lee, 2016, Mechanical properties of kenaf fibre reinforced floreon biocomposites with magnesium hydroxide filler, J. Mech. Eng. Sci., 10, 2234, 10.15282/jmes.10.3.2016.3.0209 Li, 2019, Thermogravimetric analysis of the co-combustion of residual petrochemical sludge and municipal sewage sludge, Thermochim. Acta, 673, 60, 10.1016/j.tca.2019.01.014 Li, 2023, Pyrolysis kinetics and thermodynamic parameters of bamboo residues and its three main components using thermogravimetric analysis, Biomass Bioenergy, 170, 10.1016/j.biombioe.2023.106705 Liu, 2016, Influence of microwave drying on the combustion characteristics of food waste, Dry. Technol., 34, 1397, 10.1080/07373937.2015.1118121 Liu, 2021, Study of combustion characteristics and kinetics of agriculture briquette using thermogravimetric analysis, ACS Omega, 6, 15827, 10.1021/acsomega.1c01249 Liu, 2020, Influence of modified fiber–MHSH hybrids on fire hazards, combustion dynamics, and mechanical properties of flame‐retarded poly (butylene succinate) composites, J. Appl. Polym. Sci., 137, 48490, 10.1002/app.48490 Lu, 2023, Box-behnken design for effective adsorption of Cu (II) and Cd (II) using microwave-assisted synthesized Cu (II)/Cd (II) imprinted polymer in celery extract, J. Water Chem. Technol., 45, 246, 10.3103/S1063455X23030050 Lubwama, 2018, Characteristics of briquettes developed from rice and coffee husks for domestic cooking applications in Uganda, Renew. Energy, 118, 43, 10.1016/j.renene.2017.11.003 Lubwama, 2020, Effects and interactions of the agricultural waste residues and binder type on physical properties and calorific values of carbonized briquettes, Biomass-.-. Convers. Biorefinery, 1 Lubwama, 2021, Pyrolysis kinetics and combustion characteristics of local firewood species and charcoal produced by slow pyrolysis, Biomass-.-. Convers. Biorefinery, 10.1007/s13399-021-02050-3 Manirul Haque, 2023, Validated kinetic spectrophotometric methods to optimize robustness study with youden factorial combinations to determine repaglinide using response surface methodology via box–behnken design, Arab. J. Sci. Eng., 48, 129, 10.1007/s13369-022-06782-w Megha, 2023, Biodegradable polymers–research and applications, Phys. Sci. Rev. Mehraz, 2020, Modification of silk fibers via β-cyclodextrin–empirical modeling and process optimization using response surface methodology, J. Nat. Fibers, 17, 1225, 10.1080/15440478.2018.1558154 Meng, 2011, PLA/clay/wood nanocomposites: nanoclay effects on mechanical and thermal properties, J. Compos. Mater., 45, 1145, 10.1177/0021998310381541 Menya, 2020, Optimization of pyrolysis conditions for char production from rice husks and its characterization as a precursor for production of activated carbon, Biomass-.-. Convers. Biorefinery, 10, 57, 10.1007/s13399-019-00399-0 Mishra, 2020, Kinetic analysis and pyrolysis behaviour of waste biomass towards its bioenergy potential, Bioresour. Technol., 311, 10.1016/j.biortech.2020.123480 Müsellim, 2018, Thermokinetic and TG/DSC-FTIR study of pea waste biomass pyrolysis, Appl. Therm. Eng., 137, 54, 10.1016/j.applthermaleng.2018.03.050 Nizamuddin, 2019, Synthesis and characterization of polylactide/rice husk hydrochar composite, Sci. Rep., 9, 10.1038/s41598-019-41960-1 Nsubuga, 2023, Optimization of adsorbent dose and contact time for the production of jackfruit waste nutrient-enriched biochar, Waste Dispos. Sustain. Energy, 5, 63, 10.1007/s42768-022-00123-1 Pai, 2015, Surface morphology & mechanical properties of some unique natural fiber reinforced polymer composites—A review, J. Mater. Environ. Sci., 6, 902 Parthasarathy, 2021, Thermal degradation characteristics and gasification kinetics of camel manure using thermogravimetric analysis, J. Environ. Manag., 287, 10.1016/j.jenvman.2021.112345 Parthasarathy, 2022, Pyrolysis characteristics, kinetic, and thermodynamic analysis of camel dung, date stone, and their blend using thermogravimetric analysis, Biomass-.-. Convers. Biorefinery, 1 Pudełko, 2021, Waste derived biochar as an alternative filler in biocomposites-Mechanical, thermal and morphological properties of biochar added biocomposites, J. Clean. Prod., 278, 10.1016/j.jclepro.2020.123850 Radzi, 2018, Mechanical and thermal performances of roselle fiber-reinforced thermoplastic polyurethane composites, Polym. -Plast. Technol. Eng., 57, 601, 10.1080/03602559.2017.1332206 Raj, 2021, Philosophy of selecting ASTM standards for mechanical characterization of polymers and polymer composites, Mater. Plast., 58, 247, 10.37358/MP.21.3.5523 Ramesh, 2020, Effect of MMT clay on mechanical, thermal and barrier properties of treated aloevera fiber/PLA-hybrid biocomposites, Silicon, 12, 1751, 10.1007/s12633-019-00275-6 Raza, 2023, Pyrolytic kinetics and thermodynamic analyses of date seeds at different heating rates using the Coats–Redfern method, Fuel, 342, 10.1016/j.fuel.2023.127799 Rismalia, 2019, Infill pattern and density effects on the tensile properties of 3D printed PLA material. InJournal of Physics, Vol. 1402 Saba, 2019, Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: Mechanical and thermomechanical properties, Constr. Build. Mater., 201, 138, 10.1016/j.conbuildmat.2018.12.182 Sambasevam, 2023, An optimization of fungal chitin grafted polyaniline for ammonia gas detection via Box Behnken design, Int. J. Biol. Macromol., 238, 10.1016/j.ijbiomac.2023.124079 Sawpan, 2011, Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites, Compos. Part A: Appl. Sci. Manuf., 42, 310, 10.1016/j.compositesa.2010.12.004 Sezer, 2021, The investigation of co-combustion process for synergistic effects using thermogravimetric and kinetic analysis with combustion index, Therm. Sci. Eng. Prog., 23 Shahat, 2023, Equilibrium, Thermodynamic and kinetic modeling of triclosan adsorption on Mesoporous carbon nanosphere: Optimization using Box-Behnken design, J. Mol. Liq., 10.1016/j.molliq.2023.122166 Shaik, 2022, Manufacturing of biocomposites for domestic applications using bio-based filler materials, J. Compos. Sci., 6, 78, 10.3390/jcs6030078 Si, 2014, Synergistic flame retardant effects and mechanisms of nano-Sb2O3 in combination with aluminum phosphinate in poly (ethylene terephthalate), Polym. Degrad. Stab., 100, 70, 10.1016/j.polymdegradstab.2013.12.023 Siakeng, 2019, Natural fiber reinforced polylactic acid composites: a review, Polym. Compos., 40, 446, 10.1002/pc.24747 Singh, 2019, Pyrolysis kinetic study of waste milk packets using thermogravimetric analysis and product characterization, J. Mater. Cycles Waste Manag., 21, 1350, 10.1007/s10163-019-00891-9 Singh, 2016, Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste, Fuel, 174, 164, 10.1016/j.fuel.2016.01.049 Song, 2019, Effect of the additives on combustion characteristics and desulfurization performance of cow dung briquette, Chem. Eng. Process. -Process. Intensif., 143, 10.1016/j.cep.2019.107585 Srivabut, 2022, Response surface optimization and statistical analysis of composites made from calcium carbonate filler-added recycled polypropylene and rubberwood fiber, J. Thermoplast. Compos. Mater., 35, 391, 10.1177/0892705719889988 Steven, 2021, Routes for energy and bio-silica production from rice husk: a comprehensive review and emerging prospect, Renew. Sustain. Energy Rev., 149, 10.1016/j.rser.2021.111329 Suriani, 2021, Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler, Text. Res. J., 91, 2600, 10.1177/00405175211008615 Taib, 2023, A review on poly lactic acid (PLA) as a biodegradable polymer, Polym. Bull., 80, 1179, 10.1007/s00289-022-04160-y Tang, 2022, Thermogravimetric analysis of the combustion characteristics and combustion kinetics of coals subjected to different chemical demineralization processes, ACS Omega, 7, 13998, 10.1021/acsomega.2c00522 Tessema, 2019, Briquetting of sesame stalk using waste paper as binding agent to replace petcoke, Int. J. Adv. Sci. Eng., 6, 1382, 10.29294/IJASE.6.2.2019.1382-1389 Tharazi, 2017, Optimization of hot press parameters on tensile strength for unidirectional long kenaf fiber reinforced polylactic-acid composite, Procedia Eng., 184, 478, 10.1016/j.proeng.2017.04.150 Tran, 2014, Rice and Einkorn wheat husks reinforced poly (lactic acid)(PLA) biocomposites: effects of alkaline and silane surface treatments of husks, Ind. Crops Prod., 58, 111, 10.1016/j.indcrop.2014.04.012 Turmanova, 2008, Non-isothermal degradation kinetics of filled with rise husk ash polypropene composites, Express Polym. Lett., 2, 133, 10.3144/expresspolymlett.2008.18 Turyasingura, 2023, Optimisation of eggshell-zeolite composite as a potential surfactant adsorbent for hand-washing wastewater, Case Stud. Chem. Environ. Eng., 7, 10.1016/j.cscee.2022.100284 Venkateshwaran, 2011, Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite, J. Reinf. Plast. Compos., 30, 1621, 10.1177/0731684411426810 Xing, 2019, Thermogravimetric analysis and kinetics of mixed combustion of waste plastics and semicoke, J. Chem., 12, 2019 Yaghoobi, 2018, Modeling and optimization of tensile strength and modulus of polypropylene/kenaf fiber biocomposites using Box–Behnken response surface method, Polym. Compos., 39, E463, 10.1002/pc.24596 Yiga, 2022, Thermal stability of unmodified and alkali-modified rice husks for flame retardant fiber-reinforced PLA composites, J. Therm. Anal. Calorim., 1 Yiga, 2023, Thermal stability of NaOH modified rice husk fiber-reinforced polylactic acid composites: effect of rice husks and clay loading. Results in, Materials, 18 Yiga, 2023, Development of carbonized rice husks briquettes: synergy between emissions, combustion, kinetics and thermodynamic characteristics, Energy Rep., 9, 5977, 10.1016/j.egyr.2023.05.066 Yiga, 2020, Development of fiber-reinforced polypropylene with NaOH pretreated rice and coffee husks as fillers: mechanical and thermal properties, J. Thermoplast. Compos. Mater., 33, 1269, 10.1177/0892705718823255 Yiga, 2021, Flame retardancy and thermal stability of agricultural residue fiber‐reinforced polylactic acid: a review, Polym. Compos., 42, 15, 10.1002/pc.25835 Yiga, 2021, Optimization of tensile strength of PLA/clay/rice husk composites using Box-Behnken design, Biomass-.-. Convers. Biorefinery, 1 Yussuf, 2010, Comparison of polylactic acid/kenaf and polylactic acid/rise husk composites: the influence of the natural fibers on the mechanical, thermal and biodegradability properties, J. Polym. Environ., 18, 422, 10.1007/s10924-010-0185-0 Zhang, 2018, Mechanical properties of rice husk biochar reinforced high density polyethylene composites, Polymers, 10, 286, 10.3390/polym10030286 Zhang, 2022, Conversion from bamboo waste derived biochar to cleaner composites: synergistic effects of aramid fiber and silica, J. Clean. Prod., 347, 10.1016/j.jclepro.2022.131336 Zhang, 2020, Improvement on the properties of microcrystalline cellulose/polylactic acid composites by using activated biochar, J. Clean. Prod., 252, 10.1016/j.jclepro.2019.119898 Zhang, 2020, Pyrolysis kinetics and mechanical properties of poly (lactic acid)/bamboo particle biocomposites: effect of particle size distribution, Nanotechnol. Rev., 9, 524, 10.1515/ntrev-2020-0037