Prediction of part distortion in re-contouring processes

Gao, 2008, An Integrated Adaptive Repair Solution for Complex Aerospace Components Through Geometry Reconstruction, The International Journal of Advanced Manufacturing Technology, 36, 1170, 10.1007/s00170-006-0923-6 Mohaghegh, 2007, Reverse Engineering of Turbine Blades Based on Design Intent, The International Journal of Advanced Manufacturing Technology, 32, 1009, 10.1007/s00170-006-0406-9 Yilmaz, 2010, A Repair and Overhaul Methodology for Aeroengine Components, Robotics and Computer-Integrated Manufacturing, 26, 190, 10.1016/j.rcim.2009.07.001 Chatelain, 2011, A Comparison of the distortion of machined parts resulting from Residual stresses within workpieces, Recent Advances in Manufacturing Engineering, 79 Chatelain, 2012, Effect of Residual Stresses Embedded Within Workpieces on the Distortion of Parts After Machining, International Journal of Mechanics, 6, 43 Huang, 2015, Finite Element Simulation and Experimental Investigation on the Residual Stress-Related Monolithic Component Deformation, The International Journal of Advanced Manufacturing Technology, 77, 1035, 10.1007/s00170-014-6533-9 Marusich, 2009 Bi, 2009, Machining Distortion Prediction of Aerospace Monolithic Components, Journal of Zhejiang University Science A, 10, 661, 10.1631/jzus.A0820392 de Leon Garcia, 2010 Hornbach, 1998, Development of Machining Procedures to Minimize Distortion During Manufacture, Proceedings of the 17th Heat Treating Society Conference and Exposition, 13 Marusich, 2008, Finite Element Modeling of Part Distortion, 329 Tao, 2015, Recent Repair Technology for Aero-Engine Blades, Recent Patents on Engineering, 9, 132, 10.2174/1872212109666150710184126 Wu, 2015, Adaptive Location of Repaired Blade for Multi-Axis Milling, Journal of Computational Design and Engineering, 2, 261, 10.1016/j.jcde.2015.06.009 Wu, 2013, A Review of Geometric Reconstruction Algorithm and Repairing Methodologies for Gas Turbine Components, Telkomnika, 11, 1609, 10.11591/telkomnika.v11i3.2311 Böß, 2016, Repairing Parts from Nickel Base Material Alloy by Laser Cladding and Ball End Milling, Production Engineering, 10, 433, 10.1007/s11740-016-0690-7 Chen, 2011, Fibre Laser Welding of Dissimilar Alloys of Ti-6Al-4V and Inconel 718 for Aerospace Applications, The International Journal of Advanced Manufacturing Technology, 52, 977, 10.1007/s00170-010-2791-3 Jones, 2012, Remanufacture of Turbine Blades by Laser Cladding, Machining and in-Process Scanning in a Single Machine, 23rd Annual International Solid Freeform Fabrication Symposium, 821 Leyens, 2015, Innovations in Laser Cladding and Direct Laser Metal Deposition, 181 Gao, 2006, Adaptive Restoration of Complex Geometry Parts through Reverse Engineering Application, Advances in Engineering Software, 37, 592, 10.1016/j.advengsoft.2006.01.007 Boess, 2013, Numerical Simulation of Process Forces During Re-Contouring of Welded Parts Considering Different Material Properties, CIRP Journal of Manufacturing Science and Technology, 6, 167, 10.1016/j.cirpj.2013.05.001 Denkena, 2014, Residual Stresses Formation After Re-Contouring of Welded Ti-6Al-4V Parts by Means Of 5-Axis Ball Nose End Milling, CIRP Journal of Manufacturing Science and Technology, 7, 347, 10.1016/j.cirpj.2014.07.001 Huang, 2015, An Experimental Investigation of Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy, Advances in Mechanical Engineering, 5 Wang, 2014, Error Prediction and Compensation Based on Interference-Free Tool Paths in Blade Milling, The International Journal of Advanced Manufacturing Technology, 71, 1309, 10.1007/s00170-013-5535-3 Altintas, 2014, Virtual Process Systems for Part Machining Operations, CIRP Annals Manufacturing Technology, 63, 585, 10.1016/j.cirp.2014.05.007 Dreier, 2016, Simulation Based Reduction of Residual Stress Related Part Distortion, Material Science & Engineering Technology, 47, 710 Gang, 2009, Study on Deformation of Titanium Thin-Walled Part in Milling Process, Journal of Materials Processing Technology, 209, 2788, 10.1016/j.jmatprotec.2008.06.029 Denkena, 2017, Residual Stress Formation after Re-Contouring of Micro-Plasma Welded Ti−6Al−4 V Parts by Means of Ball End Milling, Material Science & Engineering Technology, 48, 1034 Böß, 2016, Prediction of the Principal Stress Direction for 5-Axis Ball End Milling, Procedia CIRP, 45, 291, 10.1016/j.procir.2016.02.145 Sridhar, 2015, Effect of a Milling Cutter Diameter on Distortion Due to the Machining of Thin Wall Thin Floor Components, Advances in Production Engineering & Management, 10, 140, 10.14743/apem2015.3.198 Denkena, 2009, Technological NC Simulation for Grinding and Cutting Processes Using CutS, 12th CIRP Conference on Modelling of Machining Operations, 563 Denkena, 2015, Simulation and Evaluation of Different Process Strategies in a 5-Axis Re-Contouring Process, Procedia CIRP, 35, 31, 10.1016/j.procir.2015.08.059