Prediction of failure properties of injection-molded short glass fiber-reinforced polyamide 6,6
Tóm tắt
Từ khóa
Tài liệu tham khảo
Thomason, 1996, Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: Part 3. Strength and strain at failure, Composites Part A, 27, 1075, 10.1016/1359-835X(96)00066-8
Fu, 1996, Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Compos Sci Technol, 56, 1179, 10.1016/S0266-3538(96)00072-3
Fu, 1998, The elastic modulus of misaligned short-fiber-reinforced polymers, Compos Sci Technol, 58, 389, 10.1016/S0266-3538(97)00129-2
Nguyen BN, Kunc V, Bapanapalli SK, Phelps JH, Tucker III CL. Damage modeling of injection-molded short- and long-fiber thermoplastics. In: Proceedings of 9th-annual SPE automotive composites conference & exhibition (ACCE), Troy, Michigan; September, 2009.
Bowyer, 1972, On the re-inforcement of thermoplastics by imperfectly aligned discontinuous fibres, J Mater Sci, 7, 1315, 10.1007/BF00550698
Eshelby, 1957, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc Roy Soc Lond A, 241, 376, 10.1098/rspa.1957.0133
Mori, 1973, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metall, 21, 571, 10.1016/0001-6160(73)90064-3
Chen, 1996, Effective moduli of misoriented short-fiber composites, Int J Solids Struct, 33, 2519, 10.1016/0020-7683(95)00160-3
Doghri, 2005, Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers, Int J Plasticity, 21, 1919, 10.1016/j.ijplas.2004.09.003
Kammoun, 2011, First pseudo-grain failure model for inelastic composites with misaligned short fibers, Composites Part A, 42, 1892, 10.1016/j.compositesa.2011.08.013
Nguyen, 2005, A mechanistic approach to matrix cracking coupled with fiber–matrix debonding in short-fiber composites, J Eng Mater Technol, 127, 337, 10.1115/1.1924565
Hashimoto, 2012, Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution, Composites Part A, 43, 1791, 10.1016/j.compositesa.2012.05.006
Harper, 2012, Representative volume elements for discontinuous carbon fibre composites – Part 1: boundary conditions, Compos Sci Technol, 72, 225, 10.1016/j.compscitech.2011.11.006
Okabe, 2012, Numerical simulation of microscopic damage and strength of fiber-reinforced plastic composites, Adv Compos Mater, 21, 147, 10.1080/09243046.2012.688495
Huang, 2006, Numerical simulation of matrix micro-cracking in short fiber reinforced polymer composites: initiation and propagation, Compos Sci Technol, 66, 2743, 10.1016/j.compscitech.2006.03.013
Kobayashi, 2004, Modelling and simulation on failure prediction of ductile polymer based on craze evolution and annihilation, Trans Jpn Soc Eng A, 70, 810, 10.1299/kikaia.70.810
Murakami, 2002, A thermomechanical modeling and simulation of viscoplastic large deformation behavior for polymeric materials: 2nd report, vertex model based on flow rule and it’s finite element analysis, Trans Jpn Soc Mech Eng A, 68, 682, 10.1299/kikaia.68.682
Okabe, 2010, Micromechanics on the rate-dependent fracture of discontinuous fiber-reinforced plastics, Int J Damage Mech, 19, 339, 10.1177/1056789509103649
Matous, 2006, Multiscale modeling of particle debonding in reinforced elastomers subjected to finite deformations, Int J Numer Methods Eng, 65, 190, 10.1002/nme.1446
Ohno, 2002, Microscopic symmetric bifurcation condition of cellular solids based on a homogenization theory of finite deformation, J Mech Phys Solids, 50, 1125, 10.1016/S0022-5096(01)00106-5
Takahashi, 2010, Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior, Int J Mech Sci, 52, 266, 10.1016/j.ijmecsci.2009.09.028
Thomason, 1996, Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: Part 1. Tensile and flexural modulus, Composites Part A, 27, 477, 10.1016/1359-835X(95)00065-A