Prediction of bonded asymmetric metallic cross-tension and single lap shear joints using finite element model with material-level adhesive properties and cohesive zone method

Watson, 2019, Metallic multi-material adhesive joint testing and modeling for vehicle lightweighting, Int J Adhesion Adhes, 95, 10.1016/j.ijadhadh.2019.102421 Lanzerath, 2014, Benefit of structural adhesives in full car crash applications, SAE Tech Pap, 10.4271/2014-01-0811 dos Reis, 2019, Mechanical characterization of a modern epoxy adhesive for automotive industry, J Brazilian Soc Mech Sci Eng, 41, 1, 10.1007/s40430-019-1844-2 da Silva, 2018 Ezzine, 2018, Damage of bonded, riveted and hybrid (bonded/riveted) joints, Experimental and numerical study using CZM and XFEM methods, Adv Aircr Spacecr Sci, 5, 595 Weiland, 2019, Stiffness and strength analysis of hybrid adhesive bonded–resistance spot welded sandwich samples by means of virtual FE testing, J Adhes, 95, 543, 10.1080/00218464.2018.1553713 Khayer Dastjerdi, 2013, Direct measurement of the cohesive law of adhesives using a rigid double cantilever beam technique, Exp Mech, 53, 1763, 10.1007/s11340-013-9755-0 Watson, 2018, Mode I traction-separation measured using rigid double cantilever beam applied to structural adhesive, J Adhes, 96, 717, 10.1080/00218464.2018.1502666 Watson, 2020, Quantification of mixed mode loading and bond line thickness on adhesive joint strength using novel test specimen geometry, Int J Adhesion Adhes, 102, 10.1016/j.ijadhadh.2020.102682 Machado, 2018, Numerical study of impact behaviour of mixed adhesive single lap joints for the automotive industry, Int J Adhesion Adhes, 84, 92, 10.1016/j.ijadhadh.2018.02.036 Di Franco, 2013, Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks, Int J Adhesion Adhes, 41, 24, 10.1016/j.ijadhadh.2012.10.008 da Silva, 2009, Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints, Int J Adhesion Adhes, 29, 621, 10.1016/j.ijadhadh.2009.02.012 Ibrahim, 2022, Mechanical testing of adhesive, self-piercing rivet, and hybrid jointed aluminum under tension loading, Int J Adhesion Adhes, 113, 10.1016/j.ijadhadh.2021.103066 Karachalios, 2013, Single lap joints loaded in tension with high strength steel adherends, Int J Adhesion Adhes, 43, 81, 10.1016/j.ijadhadh.2013.01.016 Karachalios, 2013, Single lap joints loaded in tension with ductile steel adherends, Int J Adhesion Adhes, 43, 96, 10.1016/j.ijadhadh.2013.01.017 Ciardiello, 2020, Experimental investigation on adhesively bonded U-shaped metallic joints using the Arcan test, J Adv Join Process, 1 Terasaki, 2021, Mechanoluminescent study for optimization of joint design on cross tension test, The journal of adhesion Ufferman, 2018, Mechanical properties of joints in 5052 aluminum made with adhesive bonding and mechanical fasteners, Int J Adhesion Adhes, 83, 96, 10.1016/j.ijadhadh.2018.02.030 Boutar, 2016, Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applications, Int J Adhesion Adhes, 67, 38, 10.1016/j.ijadhadh.2015.12.023 Ben Fekih, 2021, Derivation of a fatigue damage law for an adhesive from in-situ bending tests, Eng. Fract. Mech., 245, 107587, 10.1016/j.engfracmech.2021.107587 Zhang, 2018, Effect of the cohesive law shape on the modelling of adhesive joints bonded with brittle and ductile adhesives, Int J Adhesion Adhes, 85, 37, 10.1016/j.ijadhadh.2018.05.017 Fernandes, 2015, Adhesive selection for single lap bonded joints: experimentation and advanced techniques for strength prediction, J Adhes, 91, 841, 10.1080/00218464.2014.994703 Akhavan-Safar, 2020, Tensile fatigue life prediction of adhesively bonded structures based on CZM technique and a modified degradation approach, Proc Inst Mech Eng Part G J Aerosp Eng, 234, 10.1177/0954410020951675 Campilho, 2009, Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes, Int J Adhesion Adhes, 29, 195, 10.1016/j.ijadhadh.2008.03.005 Marzi, 2009 Alfano, 2007, Cohesive zone modeling of mode I fracture in adhesive bonded joints, Key Eng Mater, 348–349, 13, 10.4028/www.scientific.net/KEM.348-349.13 Reis, 2011, Effect of adherends rigidity on the shear strength of single lap adhesive joints, Int J Adhesion Adhes, 31, 193, 10.1016/j.ijadhadh.2010.12.003 Park, 2016, Assessment of cohesive traction-separation relationships in ABAQUS: a comparative study, Mech Res Commun, 78, 71, 10.1016/j.mechrescom.2016.09.004 Sepasdar, 2020, Overcoming the convergence difficulty of cohesive zone models through a Newton-Raphson modification technique, Eng Fract Mech, 233, 10.1016/j.engfracmech.2020.107046