Predicting the Drag of Rough Surfaces

Annual Review of Fluid Mechanics - Tập 53 Số 1 - Trang 439-471 - 2021
Daniel Chung1, Nicholas Hutchins1, Michael P. Schultz2, Karen A. Flack3
1Department of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3010, Australia
2Department of Naval Architecture and Ocean Engineering, US Naval Academy, Annapolis, Maryland 21402, USA
3Department of Mechanical Engineering, US Naval Academy, Annapolis, Maryland 21402, USA

Tóm tắt

Reliable full-scale prediction of drag due to rough wall-bounded turbulent fluid flow remains a challenge. Currently, the uncertainty is at least 10%, with consequences, for example, on energy and transport applications exceeding billions of dollars per year. The crux of the difficulty is the large number of relevant roughness topographies and the high cost of testing each topography, but computational and experimental advances in the last decade or so have been lowering these barriers. In light of these advances, here we review the underpinnings and limits of relationships between roughness topography and drag behavior, focusing on canonical and fully turbulent incompressible flow over rigid roughness. These advances are beginning to spill over into multiphysical areas of roughness, such as heat transfer, and promise broad increases in predictive reliability.

Từ khóa


Tài liệu tham khảo

10.1007/BF00316784

10.1007/s00348-011-1049-7

10.1017/jfm.2015.91

10.1017/jfm.2011.137

10.1017/S0022112071001824

10.1017/S002211207200045X

10.1017/jfm.2014.218

10.1016/j.ijheatfluidflow.2018.04.015

10.1017/S0022112096004673

10.1017/jfm.2019.376

10.1115/1.1861919

10.1115/1.1400115

Bowersox R., 2007, Survey of high-speed rough wall boundary layers: invited presentation

10.1063/1.870410

10.1063/1.1835771

10.1017/S0022112006000887

10.1007/978-94-017-1497-6

10.1007/s10494-019-00074-4

10.1016/j.compfluid.2015.04.008

10.1017/S0022112007006921

10.1017/jfm.2015.172

10.1017/jfm.2018.570

10.1017/jfm.2011.311

10.2514/1.J058205

10.1023/A:1016060103448

10.1017/S0022112093001363

10.1017/jfm.2015.230

10.1017/jfm.2018.336

10.2514/8.2938

10.1017/S002211200700794X

10.1680/ijoti.1939.13150

Coles D., 1968, Proceedings of the AFOSR-IFP-Stanford Conference on Computation of Turbulent Boundary Layers, 2, 1

10.1017/S0022112095004381

10.1146/annurev-fluid-122316-045056

10.1016/0017-9310(63)90097-8

Elliot WP., 1958, Eos, 39, 1048

10.1006/jcph.2000.6484

10.1146/annurev.fluid.32.1.519

10.1115/1.4001492

10.1063/1.4896280

10.1007/s10494-019-00077-1

10.1016/j.ijheatfluidflow.2016.05.008

10.1063/1.2757708

10.1016/j.ijheatfluidflow.2012.02.003

10.1063/1.1843135

10.1016/j.ijheatmasstransfer.2018.08.013

10.1115/1.4037280

10.1088/1873-7005/aadfcc

10.1007/BF00120524

10.1007/s00348-020-2921-0

10.1103/PhysRevLett.96.044502

Granville PS., 1958, The frictional resistance and turbulent boundary layer of rough surfaces, 10.5957/jsr.1958.2.4.52

Grigson C., 1992, J. Ship Res., 36, 182, 10.5957/jsr.1992.36.2.182

10.1175/1520-0450(1999)038<1262:APOUAD>2.0.CO;2

Hama FR., 1954, Trans. SNAME, 62, 333

10.1017/jfm.2016.213

Hartenberger J., 2019, Drag production of filamentous biofilm

10.1063/1.1762429

10.1017/S0022112010003988

10.1080/08927010601035738

10.1103/PhysRevFluids.3.014608

IATA (Int. Air Transp. Assoc.)., 2019, Economic performance of the airline industry: 2019 end-year report

10.1016/j.ijheatfluidflow.2018.05.008

10.1017/S0022112081002279

10.1017/jfm.2018.541

10.1146/annurev.fluid.36.050802.122103

10.2514/1.41266

10.1175/JAM2500.1

Kays WM, 1993, Convective Heat and Mass Transfer, 2

10.1016/j.ijheatfluidflow.2009.11.007

10.1063/1.4737658

10.1017/jfm.2018.953

10.1017/S0022112007009305

10.1017/S0022112007006465

10.1063/1.2821908

10.1017/jfm.2015.344

10.1017/S0022112003005500

10.1017/jfm.2019.351

10.2514/2.1964

Luchini P, 1991, J. Fluid Mech., 228, 87

10.1007/s10652-008-9080-9

10.1017/jfm.2016.459

10.1017/jfm.2017.69

10.1017/jfm.2018.900

10.1017/jfm.2018.150

10.1016/S1352-2310(97)00403-2

10.1017/jfm.2017.849

10.1063/1.3291076

10.1063/1.4832377

10.1080/08927014.2016.1148140

Moody LF., 1944, Trans. ASME, 66, 671

Moyes AJ, 2017, Drag reduction initial conditions on various legacy fleet aircraft: surface roughness measurements

10.1080/08927014.2018.1517867

Musker AJ., 1980, Trans. CSME, 6, 1

10.1063/1.3006423

10.1017/S0022112008003571

10.1146/annurev-fluid-120710-101048

Newton R, 2018, Proceedings of the 21st Australasian Fluid Mechanics Conference

Nikora V, 2006, River Flow 2002: Proceedings of the International Conference on Fluvial Hydraulics, 83

10.1061/(ASCE)0733-9429(2007)133:8(873)

10.1017/jfm.2019.344

Nikuradse J., 1933, Strömungsgesetze in rauhen Rohren

10.1016/j.ijheatfluidflow.2013.04.003

Nugroho B, 2020, J. Fluid Mech

10.1016/j.ijheatmasstransfer.2016.04.035

10.1017/S0022112063000288

10.1016/j.ijheatmasstransfer.2019.04.013

10.1017/S0022112063001245

10.1016/j.pce.2018.10.005

10.1017/jfm.2015.552

10.1007/s00348-006-0248-0

Pokrajac D, 2006, River Flow 2006: Proceedings of the International Conference on Fluvial Hydraulics, 89

Prandtl L, 1934, Werft Reeder. Hafen, 15, 1

10.1103/PhysRevFluids.2.082601

10.1007/BF00709229

10.1115/1.3119492

10.1007/BF00119495

10.1017/jfm.2019.84

Sarakinos S, 2019, Proceedings of the 11th International Symposium on Turbulence and Shear Flow Phenomena (TSFP11)

Schlichting H., 1937, Experimental investigation of the problem of surface roughness

10.1080/08927014.2010.542809

10.1017/S0022112007005502

10.1063/1.3059630

10.1063/1.4791606

10.1080/08927014.2015.1108407

10.1017/jfm.2020.27

10.1017/S0022112006001467

10.2514/3.10427

10.2514/6.2017-3691

10.1098/rsta.2010.0369

10.1017/jfm.2016.196

10.1017/jfm.2017.132

10.1146/annurev-fluid-010816-060206

10.1080/00221686.2018.1473296

10.1115/1.4034555

10.1017/jfm.2019.1030

10.1080/14685248.2016.1258119

10.1017/jfm.2017.873

Townsend AA., 1956, The Structure of Turbulent Shear Flow

10.1080/0892701031000088535

10.1115/1.1486222

10.1017/jfm.2015.292

10.1017/jfm.2017.345

10.1103/PhysRevFluids.3.034606

10.2514/3.61216

10.1017/jfm.2020.262

10.1017/jfm.2019.673

10.1017/jfm.2017.397

10.1146/annurev.fl.11.010179.002445

10.1007/s10494-017-9839-5

10.1017/jfm.2015.687

10.1080/14685248.2014.907904

10.1017/jfm.2014.608

10.1038/s41567-017-0026-3