Power electronic transformer design with dual-PWM based on MATLAB/Simulink

Wireless Networks - Tập 27 - Trang 4375-4387 - 2021
En Fang1, Lulu Bei2, Jiu-yang Mu1, Guan-bao Zhang1, Song-hai Zhou3
1School of Electrical and Control Engineering, Xuzhou University of Technology, Xuzhou, China
2Jiangsu Province Key Laboratory of Intelligent Industry Control Technology, Xuzhou University of Technology, Xuzhou, China
3Scientific Research Management Department, Jiangsu Zongshen Automobile Industry Limited Company, Xuzhou, China

Tóm tắt

With the continuous development of new energy power generation and smart grid, Power Electronic Transformer (PET) has a good prospect for development because of its remarkable advantages. Based on the topology of AC/DC/AC, the modulation strategy with dual-PWM (Pulse Width Modulation) is adopted to control the operation of power electronic transformers in this paper. The PET structure consists of three units: importation portion, isolation portion and output portion. Model building and analyzing both at the input and output terminals are achieved step by step. And the simulation of the whole PET system with dual-PWM is accomplished with MATLAB/ Simulink. The simulation results show the control system stability and output voltage regulation precision are improved with feed-forward voltage decoupling vector control system. The correctness and effectiveness of the control strategy are demonstrated through the simulation. PETs play an important role in enhancing power supply reliability for Power Grid and promoting the new energy power generation development.

Tài liệu tham khảo

Wensi, L. (2011). Research on modeling method and control technology of power electronic transformer. Shandong University. Yisheng, Y., Kaixiang, M., & Shiying, Y. (2019). Large signal modeling and analysis of DC-bus voltage of power electronic transformer applied in electric locomotive. Power System Protection and Control, 47(04), 83–90. https://doi.org/10.7667/PSPC180314 Jiang, D., Wang, Y., Lv, Z., Wang, W., & Wang, H. (2020). An energy-efficient networking approach in cloud services for IIoT networks. IEEE Journal on Selected Areas in Communications, 38(5), 928–941. https://doi.org/10.1109/JSAC.2020.2980919 Feng, Xu., & Jun, J. (2018). Simulation research on improving power quality of power electronic transformer. Electromechanical Information, 36, 4–6. Jiang, D., Wang, W., Shi, L., & Song, H. (2020). A compressive sensing-based approach to end-to-end network traffic reconstruction. IEEE Transactions on Network Science and Engineering, 7(1), 507–519. Xiang-Long, L., You-Bo, L., Chen-Yu, Z., et al. (2019). Coordinating voltage regulation for AC-DC hybrid distribution network with multiple power electronic transformer. Advanced Technology of Electrical Engineering and Energy, 188(02), 38–46. Jiang, D., Huo, L., & Song, H. (2020). Rethinking behaviors and activities of base stations in mobile cellular networks based on big data analysis. IEEE Transactions on Network Science and Engineering, 7(1), 80–90. https://doi.org/10.1109/TNSE.2018.2861388 Jiang, D., Wang, Y., Lv, Z., Qi, S., & Singh, S. (2019). Big data analysis based network behavior insight of cellular networks for industry 4.0 applications. IEEE Transactions on Industrial Informatics, 16(2), 1310–1320. https://doi.org/10.1109/TII.2019.2930226 Jiang, D., Huo, L., Lv, Z., Song, H., & Qin, W. (2018). A joint multi-criteria utility-based network selection approach for vehicle-to-infrastructure networking. IEEE Transactions on Intelligent Transportation Systems, 19(10), 3305–3319. https://doi.org/10.1109/TITS.2017.2778939 Tian, Z. (2017). Design of power electronic transformer. Industrial Control Computer, 30(12), 149–150. Jiang, D., Huo, L., & Li, Y. (2018). Fine-granularity inference and estimations to network traffic for SDN. PLoS ONE, 13(5), 1–23. https://doi.org/10.1371/journal.pone.0194302 Lewicki, A., & Morawiec, M. (2019). The structure and the space vector modulation for a medium voltage power-electronic-transformer based on two seven-level cascade H-bridge inverters. IET Electric Power Applications, 13(10), 1514–1523. https://doi.org/10.1049/iet-epa.2018.5886 Jiang, D., Wang, F., Lv, Z., et al. (2021). QoE-Aware efficient content distribution scheme for satellite-terrestrial networks. IEEE Transactions on Mobile Computing. https://doi.org/10.1109/TMC.2021.3074917 Xing, Z. (2003). Research on PWM rectifier and its control strategy. Hefei University of Technology. Jiang, D., Wang, Z., Huo, L., et al. (2020). A performance measurement and analysis method for software-defined networking of IoV. IEEE Transactions on Intelligent Transportation Systems, 99, 1–13. https://doi.org/10.1109/TITS.2020.3029076 Shaodi, O., Jinjun, L., Yue, Y., et al. (2019). DC voltage control strategy of three-terminal medium-voltage power electronic transformer-based soft normally open points. IEEE Transactions on Industrial Electronics, 99, 1–1. https://doi.org/10.1109/TIE.2019.2922915 Jiang, D., Zhang, P., Lv, Z., et al. (2016). Energy-efficient multi-constraint routing algorithm with load balancing for smart city applications. IEEE Internet of Things Journal, 3(6), 1437–1447. https://doi.org/10.1109/JIOT.2016.2613111 Jiang, D., Wang, Z., Wang, W., et al. (2021). AI-assisted energy-efficient and intelligent routing for reconfigurable wireless networks. IEEE Transactions on Network Science and Engineering. https://doi.org/10.1109/TNSE.2021.3075428 Qin, H., & Kimbal, J. W. (2013). Solid-state transformer architecture using AC–AC dual-active-bridge converter. IEEE Transaction on Industrial Electronics, 60(9), 3720–3730. https://doi.org/10.1109/tie.2012.2204710 Yang, Y., Pei, W., Deng, W., et al. (2019). Benefit analysis of using multi-port and multi-function power electronic transformer connecting hybrid AC/DC power grids. The Journal of Engineering, 2019(16), 1076–1080. https://doi.org/10.1049/joe.2018.8446 Li jianli, . (2016). Discussion on the control and application of electronic power transformer. Heilongjiang Science and Technology Information, 2016(23), 53. Jiang, D., Huo, L., Zhang, P., et al. (2020). Energy-efficient heterogeneous networking for electric vehicles networks in smart future cities. IEEE Transactions on Intelligent Transportation Systems, 99, 1–13. https://doi.org/10.1109/TITS.2020.3029015 Geng, Q., & Hu, Y. (2019). Energy storage device locating and sizing based on power electronic transformer. Journal of Engineering, 2019(16), 3164–3168. https://doi.org/10.1049/joe.2018.8773 Wang, Z., Jiang, D., Zhang, Z., et al. (2021). A polymorphic heterogeneous security architecture for edge-enabled smart grid. Sustainable Cities and Society, 67(4), 1–16. https://doi.org/10.1016/j.scs.2020.102661 Gaber, M., El-Banna, S., El-Dabah, M., et al. (2021). Designing and implementation of an intelligent energy management system for electric ship power system based on adaptive Neuro-Fuzzy inference system (ANFIS). Advances in Science Technology and Engineering Systems Journal, 6(2), 195–203. https://doi.org/10.25046/aj060223 Zhao, J. (2003). Simulation of power electronic transformer with constant output voltage. Power System Automation, 2003(18), 30–33. Guo, S., Mu, Y., Jia, H., et al. (2019). Optimization of AC/DC hybrid distributed energy system with power electronic transformer. Energy Procedia, 2019(158), 6687–6692. https://doi.org/10.1016/j.egypro.2019.01.021 Liu, Z., & Lin, Y. (2008). Design and simulation of power electronic transformer in distributed power generation system. Electrical Applications, 37(06), 82–86.