Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles

Journal of Cleaner Production - Tập 87 - Trang 717-725 - 2015
Alaa M. Rashad1
1Building Materials Research and Quality Control Institute, Housing & Building National Research Center (HBRC), Cairo, Egypt

Tóm tắt

Từ khóa


Tài liệu tham khảo

Ajam, 2009, Characterization of Tunisian phosphogypsum and its valorization in clay bricks, Constr. Build. Mater., 23, 3240, 10.1016/j.conbuildmat.2009.05.009

Altun, 2004, Utilization of weathered phosphogypsum as set retarder in Portland cement, Cem. Concr. Res., 34, 677, 10.1016/j.cemconres.2003.10.017

Bakharev, 2005, Geopolymeric materials prepared using Class F fly ash and elevated temperature curing, Cem. Concr. Res., 35, 1224, 10.1016/j.cemconres.2004.06.031

Bastidas-Arteaga, 2013, Influence of global warming on durability of corroding structures: a probabilistic approach, Eng. Struct., 51, 259, 10.1016/j.engstruct.2013.01.006

Chandrasekhar, 2001, Sintering behavior of calcium exchanged low silica zeolites synthesized from kaolin, Ceram. Int., 27, 105, 10.1016/S0272-8842(00)00049-3

Degirmenci, 2007, Application of phosphogypsum in soil stabilization, Build. Environ., 42, 3393, 10.1016/j.buildenv.2006.08.010

Demiraş, 1996, Optimizing the physical and technological properties of cement additives in concrete mixtures, Cem. Concr. Res., 26, 1737, 10.1016/S0008-8846(96)00169-X

Femández-Jiménez, 2005, Microstructure development of alkali-activated fly ash cement: a descriptive mode, Cem. Concr. Res., 35, 1204, 10.1016/j.cemconres.2004.08.021

Fernández-Jiménez, 2008, New cementitious materials based on alkali-activated fly ash: performance at high temperatures, J. Am. Ceram. Soc., 90, 3308, 10.1111/j.1551-2916.2008.02625.x

Kong, 2008, Damage behavior of geopolymer composites exposed to elevated temperatures, Cem. Concr. Compos., 30, 986, 10.1016/j.cemconcomp.2008.08.001

Krivenko, 2007, Directed synthesis of alkaline aluminosilicste minerals in a geocement matrix, J. Mater. Sci., 42, 2944, 10.1007/s10853-006-0528-3

Kumar, 2000, Fly ash-lime-phosphgypsum cementitious binder: a new trend in bricks, Mater. Struct., 33, 59, 10.1007/BF02481697

Lu, 2013, Vevelopment strategy of green energy industry for Taipei-A modern medium-sized city, Energy Policy, 62, 484, 10.1016/j.enpol.2013.08.007

Mehta, 1979, Modified Portland cements for saving energy

Min, 2008, Activation of fly ash-lime systems using calcined phosphogypsum, Constr. Build. Mater., 22, 1004, 10.1016/j.conbuildmat.2006.12.005

Mun, 2008, Properties of cement mortar with phosphogypsum under steam curing condition, Res. Lett. Mater. Sci., 2008, 1, 10.1155/2008/382490

Palomo, 1992, Physical, Chemical and Mechanical Characterization of Geopolymers, vol. 5, 505

Pan, 2012, Factors influencing softening temperature and hot-strength of geopolymers, Cem. Concr. Compos., 34, 261, 10.1016/j.cemconcomp.2011.09.019

Papastefanou, 2006, The application of phosphogypsum in agriculture and the radiological impact, J. Environ. Radioact., 98, 188, 10.1016/j.jenvrad.2006.05.005

Phan, 1996

Rashad, 2013, A preliminary study of alkali-activated slag blended with silica fume under the effect of thermal loads and thermal shock cycles, Constr. Build. Mater., 40, 522, 10.1016/j.conbuildmat.2012.10.014

Rashad, 2013, A comprehensive overview about the influence of different additive on the properties of alkali-activated slag – a guide for civil Engineer, Constr. Build. Mater., 47, 29, 10.1016/j.conbuildmat.2013.04.011

Rashad, 2013, Alkali-activated metakaolin: a short guide for civil engineer – an overview, Constr. Build. Mater., 41, 751, 10.1016/j.conbuildmat.2012.12.030

Rashad, 2013, Properties of alkali-activated fly ash concrete blended with slag, Iran. J. Mater. Sci. Eng., 10, 57

Rashad, 2014, A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash, Mater. Des., 53, 1005, 10.1016/j.matdes.2013.07.074

Rashad, 2012, Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature, Cem. Concr. Res., 42, 333, 10.1016/j.cemconres.2011.10.007

Rashad, 2013, Hydration and properties of sodium sulfate activated slag, Cem. Concr. Compos., 37, 20, 10.1016/j.cemconcomp.2012.12.010

Rashad, 2011, The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load, Constr. Build. Mater., 25, 3098, 10.1016/j.conbuildmat.2010.12.044

Rashad, 2012, A preliminary study of blended pastes of cement and quartz powder under the effect of elevated temperature, Constr. Build. Mater., 29, 672, 10.1016/j.conbuildmat.2011.10.006

Rehan, 2005, Carbon dioxide emissions and climate change: policy implications for cement industry, Environ. Sci. Policy, 8, 105, 10.1016/j.envsci.2004.12.006

Shen, 2009, Investigation on the application of steel slag-fly ash-phosphogypsum solidified material as road base material, J. Hazard. Mater., 164, 99, 10.1016/j.jhazmat.2008.07.125

Shen, 2014, Calcium sulphoaluminate cements made with phosphogypsum: production issues and material properties, Cem. Concr. Compos., 48, 67, 10.1016/j.cemconcomp.2014.01.009

Singh, 2000, Making of anhydrite cement from waste gypsum, Cem. Concr. Res., 30, 571, 10.1016/S0008-8846(00)00209-X

Smadi, 1999, Potential use of phosphogypsum in concrete, Cem. Concr. Res., 29, 1419, 10.1016/S0008-8846(99)00107-6

Song, 2007, Durability of fly ash based geopolymer concrete against sulphuric acid attack, 17

Taher, 2007, Influence of thermally treated phosphogypsum on the properties of Portland slag cement, Resour. Conserv. Recycl., 52, 28, 10.1016/j.resconrec.2007.01.008

Tayibi, 2009, Environmental impact and management of phosphogypsum: review, J. Environ. Manage., 90, 2377

Weiguo, 2007, Study on lime-fly ash-phosphogypsum binder, Constr. Build. Mater., 21, 1480, 10.1016/j.conbuildmat.2006.07.010

Yip, 2005, The coexistence of geopolymer gel and calcium silicate hydrate at the early stage of alkaline activation, Cem. Concr. Res., 35, 1688, 10.1016/j.cemconres.2004.10.042

Yongde, 2000, Preliminary study on combined-alkali-slag paste materials, Cem. Concr. Res., 30, 963, 10.1016/S0008-8846(00)00269-6

Zhang, 2013, Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials-An overview. Resources, Conserv. Recycl., 74, 134, 10.1016/j.resconrec.2013.03.003