Potential of turbulence interference in rough rice bin drying and storage systems fitted with cabling technology

Biosystems Engineering - Tập 163 - Trang 1-14 - 2017
Gbenga A. Olatunde1, Griffiths G. Atungulu1
1Department of Food Science, University of Arkansas Division of Agriculture, 2650 N Young Avenue, Fayetteville, AR 72704, USA

Tài liệu tham khảo

Antohe, 1997, A general two-equation macroscopic turbulence model for incompressible flow in porous media, International Journal of Heat and Mass Transfer, 40, 3013, 10.1016/S0017-9310(96)00370-5 Atungulu, 2013, Determination of dockage for accurate rough rice quality assessment, Applied Engineering in Agriculture, 29, 253, 10.13031/2013.42640 Atungulu, 2016, Assessment of fan control strategies for natural air in-bin rough rice drying in Arkansas locations, Applied Engineering in Agriculture, 32, 469, 10.13031/aea.32.11361 Bartosiewicz, 2003, CFD-experiments integration in the evaluation of six turbulence models for supersonic ejectors modeling Cabezón, 2011, Comparison of turbulence models for the computational fluid dynamics simulation of wind turbine wakes in the atmospheric boundary layer, Wind Energy, 14, 909, 10.1002/we.516 Chen, 2003, Two-dimensional micromachined flow sensor array for fluid mechanics studies, Journal of Aerospace Engineering, 16, 85, 10.1061/(ASCE)0893-1321(2003)16:2(85) Dybbs, 1984, 199 Fan, 2015, Nanoscale sensing devices for turbulence measurements, Experiments in Fluids, 56, 138, 10.1007/s00348-015-2000-0 Fluent, 2016 Gentry, 1997, Heat transfer enhancement by delta-wing vortex generators on a flat plate: Vortex interactions with the boundary layer, Experimental Thermal and Fluid Science, 14, 231, 10.1016/S0894-1777(96)00067-2 Georgiadis, 2006, Evaluation of modified two-equation turbulence models for jet flow predictions, AIAA Journal, 44, 3107, 10.2514/1.22650 Guardo, 2005, Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds, Chemical Engineering Science, 60, 1733, 10.1016/j.ces.2004.10.034 Keshani, 2015, CFD modeling of air flow on wall deposition in different spray dryer geometries, Drying Technology, 33, 784, 10.1080/07373937.2014.966201 Kim, 2004, Measurement of flow direction and velocity using a micromachined flow sensor, Sensors and Actuators A: Physical, 114, 312, 10.1016/j.sna.2003.12.019 Larson, 1996, Temperature measurements in flowing water: Viscous heating of sensor tips Latifi, 1989, The use of micro-electrodes in the study of the flow regimes in a packed bed reactor with single phase liquid flow, Chemical Engineering Science, 44, 2501, 10.1016/0009-2509(89)85194-2 Launder, 1972 Lee, 2016, A quasi-steady aerodynamic model for flapping flight with improved adaptability, Bioinspiration & Biomimetics, 11, 10.1088/1748-3190/11/3/036005 Lim, 1998, Development of a model for turbulent combustion within porous inert media, International Journal of Fluid Mechanics Research, 25, 1 Masuoka, 1996, Turbulence model for flow through porous media, International Journal of Heat and Mass Transfer, 39, 2803, 10.1016/0017-9310(95)00353-3 Menter, 1992, Influence of freestream values on k-omega turbulence model predictions, AIAA Journal, 30, 1657, 10.2514/3.11115 Mukai, 2009, Impact of airflow characteristics on particle resuspension from indoor surfaces, Aerosol Science and Technology, 43, 1022, 10.1080/02786820903131073 Olatunde, 2016, CFD modeling of air flow distribution in rice bin storage system with different grain mass configurations, Biosystems Engineering, 151, 286, 10.1016/j.biosystemseng.2016.09.007 Orszag, 1993, Renormalisation group modeling and turbulence simulations Poinsot, 2005 Robinson, 1991, Coherent motions in the turbulent boundary layer, Annual Review of Fluid Mechanics, 23, 601, 10.1146/annurev.fl.23.010191.003125 Santos, 2009, A numerical study of the influence of temperature fluctuations in the thermal radiation field Shih, 1995, A new k-eddy viscosity model for high Reynolds number turbulent flows, Computers & Fluids, 24, 227, 10.1016/0045-7930(94)00032-T Shur, 1999, Detached-eddy simulation of an airfoil at high angle of attack Spalart, 1992, A one-equation turbulence model for aerodynamic flows Spalart, 1997, Comments on the feasibility of LES for wings, and on a hybrid RANS/LES approach Wang, 1995, Boundary-layer flow and turbulence near porous obstacles, Boundary-Layer Meteorology, 74, 73, 10.1007/BF00715711 Wright, 2003, Non-linear k–ε turbulence model results for flow over a building at full-scale, Applied Mathematical Modelling, 27, 1013, 10.1016/S0307-904X(03)00123-9 Zeng, 2006, A criterion for non-Darcy flow in porous media, Transport in Porous Media, 63, 57, 10.1007/s11242-005-2720-3