Post-test assessment of simulations for in situ heater test in basalt — Part II. Comparison of predicted and measured response

Hocking, 1990, Post test assessment of simulations for in situ heater tests in basalt—Part I. Heater test description and rock mass properties, Int. J. Rock. Mech. Min. Sci. & Geomech. Abstr., 27, 143, 10.1016/0148-9062(90)94324-M Comini, 1974, Finite element solution of non-linear heat conduction problems with special reference to phase change, Int. J. Numer. Methods Engng, 8, 613, 10.1002/nme.1620080314 Boonlualohr, 1980 Zienkiewicz, 1977 Boonlualohr, 1980, Transient thermal stress analysis of an anisotropic fractured rock exhibiting locking behavior Zienkiewicz, 1969, Elasto-plastic solutions of engineering problems: initial stress finite element approach, Int. J. Numer. Methods Engng, 1, 75, 10.1002/nme.1620010107 Hocking, 1976, Three dimensional elastic stress distribution around the flat ends of a cylindrical cavity, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 13, 331, 10.1016/0148-9062(76)91059-7 Booth, 1966 Hocking, 1980, Numerical modeling of the near surface heater tests No. 1 and No. 2 Hardy, 1978, Numerical modeling of rock stresses within a basaltic nuclear waste repository—Phase II, parametric design studies Butkovich, 1980, A method for calculating internal radiation and ventilation with the ADINA heat flow code Neter, 1974 Ames, 1983, Rock mechanics' instrumentation modifications for thermochemical field test in basalt at the near surface test facility Cramer, 1985, Block test interim report, results from experimental and numerical analysis at ambient temperature Gregory, 1980, Preliminary results from the full scale heater tests at the near surface test facility AMI Staff, 1984, Thermomechanical analysis of near surface test facility full scale heater tests No. 1 and No. 2 in basalt