Post-combustion CO2 capture with activated carbons using fixed bed adsorption

Hester RE, Harrision RM (2010) Carbons capture sequestration and storage. The Royal Society of Chemistry, Cambridge IEA (2003) CO2 capture at power stations and other major point sources, Zero emission technologies for fossil fuels. OECD/IEA, Cedex Lee SY, Park SJ (2015) A review on solid adsorbents for carbon dioxide capture. J Ind Eng Chem 23:1–11 Intergovernmental Panel on Climate Change (IPCC), Climate Change (2001) Synthesis report. Cambridge University Press, Cambridge Li L, Zhao N, Wei W, Sun Y (2013) A review of research progress on CO2 capture, storage, and utilization in Chinese Academy of Sciences. Fuel 108:112–130 Rashidi NA, Yusup S (2016) An overview of activated carbons utilization for the post combustion carbon dioxide capture. J CO2 Util 13:1–16 Alabadi A, Razzaque S, Yang Y, Chen S, Tan B (2015) Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity. Chem Eng J 281:606–612 Figueroa JD, Fout T, Plasynski S, Mcllcried H, Srivastava RD (2008) Advances in CO2 capture technology – The U.S. department of energy’s carbon sequestration program. Int J Greenh Gas Cont 2:9–20 Gibbins J, Chalmers H (2008) Carbon capture and storage. Energ Policy 36:4317–4322 Blomen E, Hendriksa C, Neele F (2009) Capture Technologies: improvement and promising developments. Energy Procedia 1:1505–1512 Choi WJ, Seo JB, Jang SY, Jung JH, Oh KJ (2009) Removal characteristic of CO2 using aqueous MEA/AMP solutions in the absorption and regeneration process. J Environ Sci 21:907–913 Damen K, Troost MV, Faaij A, Turkenburg W (2006) A comparison of electricity and hydrogen production systems with CO2 capture and storage, part A: review and selection of promising conversion and capture technologies. Prog Energy Combust Sci 32:215–246 Gupta, M., Coyle, I., Thambimuthu, K. (2003). Strawman document for CO2 capture and storage technology roadmap. Canmet Energy Technology Centre, Natural Resources, Canada Brunetti A, Scura F, Barbieri G, Drioli E (2010) Membrane technologies for CO2 separation. J Membr Sci 359:115–125 Yang H, Xu Z, Fan M, Gupta R, Slimane RB, Bland AE, Wright I (2008) Progress in carbon dioxide separation and capture: a review. J Environ Sci 20:14–27 Yamasaki A (2003) An overview of carbon dioxide mitigation options for global warming emphasizing carbon dioxide sequestration options. J Chem Eng Jpn 36:361–375 MacDowell N, Florin N, Buchard A, Hallett J, Galindo A, Jackson G, Adjiman C, Williams CK, Shah N, Fennel P (2010) An overview of carbon dioxide captures technologies. Energy Environ Sci 3:1645–1669 Cohen SM, Chalmers HL, Webber ME, King CW (2011) Comparing post-combustion carbon dioxide capture operation at retrofitted coal-fired power plants in the Texas and Great Britain electric grids. Environ Res Lett 6:1–14 Sreenivasulu B, Gayatri DV, Sreedhar I, Raghavan KV (2015) A journey into the process and engineering aspects of carbon capture technologies. Renew Sust Energ Rev 41:1324–1350 Garcia S, Gil MV, Martin CF, Pis JJ, Rubiera F, Pevida C (2011) Breakthrough adsorption study of a commercial activated carbon for pre combustion carbon dioxide capture. Chem Eng J 171:549–556 Valverde JM, Pontiga F, Soria-Hoyo C, Quintanilla MAS, Moreno H, Duran FJ, Espin MJ (2011) Improving the gas solids contact efficiency in a fluidized bed of carbon dioxide adsorbent fine particles. Phys Chem Chem Phys 13:14906–14909 Li J, Ma Y, McCarthy M, Sculley J, Yu J, Jeong H, Balbuen P, Zhou H (2011) Carbon dioxide-related gas adsorption and separation in metal-organic frameworks. Coord Chem Rev 255:1791–1823 Alonso M, Rodriguez N, Gonzalez B, Grasa G, Murillo R, Abanades JC (2010) Carbon dioxide capture from combustion flue gases with a calcium oxide chemical loop: Experimental results and process development. Int J Greenh Con 4:167–173 Abanades JC, Anthony EJ, Lu DY, Salvador C, Alvarez D (2004) Capture of carbon dioxide from combustion gases in a fluidized bed of calcium oxide. AICHE J 50:1614–1622 Valverde M, Duran FJ, Pontiga F, Moreno H (2012) CO2 capture enhancement in a fluidized bed of a modified Geldart C powder. Powder Technol 224:247–252 Raganati F, Ammendola P, Chirone R (2015) CO2 capture by adsorption on fine activated carbon in a sound assisted fluidized bed. Chem Eng Trans 43:1033–1038 Cen, Q., Fang, M., Wang, Z., Luo, Z. (2013). Effect of water on CO2 adsorption with activated carbon. IEEE International Conference on Materials for Renewable Energy and Environment (ICMREE), pp. 885–888. Yusufu MI, Ariahu CC, Igbabul BD (2012) Production and characterization of activated carbon from selected raw materials. Afr J Pure Appl Chem 6(9):123–131 Rufford TE (2013) Green carbon materials; Advances and applications. Taylor & Francis group Ltd, USA Dejang N, Somprasit O, Chindaruksa S (2015) A preparation of activated carbon from Macadamia shell by microwave irradiation activation. Energy Procedia 79:727–732 Jahangiri M, Shahtaheri SJ, Adl J, Rashidi A, Kakooei H, Forushani AR, Nasiri G, Ghorbanali A, Ganjali MR (2012) Preparation of activated carbon from walnut shell and its utilization for manufacturing organic-vapor respirator cartridge. Fresenius Environ Bull 21(6a):1508–1514 Wright JD, Johnson AN, Moldover MR (2003) Design and uncertainty analysis for a PVTt gas flow standard. J Res Natl Inst Stand Technol 108:21–47 Ray S (2012) Error propagation and uncertainty evaluation for automatic control- a neglected part of engineering education. Energy Procedia 4:629–635 Farrance I, Frenkel R (2012) Uncertainty of measurement: a review of the rules for calculating uncertainty components through functional relationship. Clin Biochem Rev 33:49–75 Bryant R, Sanni O, Moore E, Bundy M, Johnson A (2014) An uncertainty analysis of the mean velocity measurements used to quantify emissions from stationary sources. J Air Waste Manage Assoc 64(6):679–689 Cho H, Luck R, Stevens JW (2015) An improvement on the standard linear uncertainty quantification using a least-square method. J Uncertain Anal Appl 3(15):1–9